FR DE EN ES IT NL PT GUIDE D'UTILISATION BETRIEBSANLEITUNG GUIDE TO INSTALLATION MANUAL DE UTILIZACIÓN MANUALE D'USO GEBRUIKSAANWIJZING GUIA DE UTILIZAÇÃO Hotte décor Dekor-Dunstabzugshaube Decorative Hood Campana extractora decorativa Cappa arredamento Designafzuigkap Exaustor decorativo FR 02 DE EN 46 ES 68 IT 90 Dear Customer, You have just acquired a DE DIETRICH hood and we would like to thank you. Our research teams have created this new generation of appliances for you. Their quality, design, features and technological advances make them exceptional products, and reveal our unique know-how. Your new DE DIETRICH hood will blend harmoniously into your kitchen and will perfectly combine cooking performance and ease of use. We wanted to offer you a product of excellence. In the DE DIETRICH product line, you will also find a wide range of hobs, ovens, microwaves, cookers, dishwashers and fridges, that you can coordinate with your new DE DIETRICH hood Of course, in an ongoing effort to best satisfy your demands with regard to our products, our after-sales service department is at your disposal and ready to listen in order to respond to all of your questions and suggestions (contact information at the end of this booklet). Visit our website www.dedietrich-electromenager.com, where you will find our latest innovations as well as useful and complementary information. DE DIETRICH Setting New Values NL 112 PT 134 As part of our commitment to constantly improving our products, we reserve the right to make changes to them based on technical advances to their technical and functional features and appearance. Warning: Before installing and using your appliance, please carefully read this Guide to Installation and Use, which will allow you to quickly familiarise yourself with its operation. 46 TABLE OF CONTENTS EN 1 / NOTICES TO THE USER · Safety recommendations ____________________________________ · Environmental protection ____________________________________ · Description of your appliance ________________________________ 2 / INSTALLING YOUR APPLIANCE · Using the evacuation mode __________________________________ · Using the recycling mode ___________________________________ · Electrical connections ______________________________________ · Assembling the hood _______________________________________ · Assembling the ventilation shaft º Outdoor evacuation __________________________________ º Recycling ___________________________________________ 3 / USING YOUR APPLIANCE · Description of control panel _________________________________ · Selection of hob type _______________________________________ · Light _____________________________________________________ · Switching to automatic mode ________________________________ · Switching to manual mode___________________________________ · Immediate stop in manual mode ______________________________ · Delayed stop in manual mode ________________________________ · Making a change in delayed stop programme ___________________ · Stopping the hood, "OFF" position ____________________________ · Saturated cartridge _________________________________________ · Recycling mode ___________________________________________ · Evacuation mode __________________________________________ · Saturated carbon filter ______________________________________ · Auto stop fan ______________________________________________ · Auto stop lighting __________________________________________ 4 / CARING FOR AND CLEANING YOUR APPLIANCE · Cleaning the filter cartridges _________________________________ · Changing the carbon filter ___________________________________ · Cleaning the outer surfaces __________________________________ · Changing the light bulb _____________________________________ · Maintaining your appliance __________________________________ 5 / TROUBLESHOOTING __________________________________________ 6 / AFTER-SALES SERVICE________________________________________ 48 49 50 51 51 52 53 54 55 56 57 58 58 58 59 59 59 60 60 60 61 61 61 61 62 62 63 63 64 65 66 47 EN 1 / NOTICES FOR THE USER Attention Keep this user guide with your appliance. If the appliance is ever sold or transferred to another person, ensure that the new owner receives the user guide. Please become familiar with these recommendations before installing and using your oven. They were written for your safety and the safety of others. · SAFETY RECOMMENDATIONS -- This oven was designed for use by private persons in their homes. -- This appliance is to be used by adults. Make sure that children do not touch and that they do not treat it as a toy. Make sure that they do not touch the appliance's control panel. -- When you receive the appliance, unpack or have it unpacked immediately. Give it an overall general inspection. Make note of any concerns or reservations on the delivery slip and make sure to keep a copy of this form. -- Your appliance is intended for standard household use. Do not use it for commercial or industrial purposes or for any other purpose than that for which it was designed. -- Do not modify or attempt to modify any of the characteristics of this appliance. This would be dangerous to your safety. -- Repairs must only be carried out by an approved specialist. -- Always unplug the hood before cleaning it or performing other maintenance acts. -- Provide adequate ventilation for the room in the case of simultaneous use of the hood and other appliances powered by an energy source other than electricity. This will prevent the hood from aspirating the combustion gases. -- You should never "flambé" dishes under the hood or operate gas rings under the hood without placing cookware on them (the flames sucked up into the hood can damage the appliance). -- When frying food under the appliance, you must carefully monitor the preparation at all times. Oils and grease brought to very high tempera48 tures can catch fire. -- Respect the recommended frequency of cleanings and filter replacements. The accumulation of grease deposits may cause a fire. -- The hood should never be used over a combustible fuel burning stove (wood, coal, etc.). -- Never use steam or high-pressure devices to clean your appliance (requirement imposed by electrical safety). -- With a view to constantly improving our products, we reserve the right to modify their technical, functional or aesthetic characteristics, making any changes to their features considered necessary or desirable in view of technical progress. -- In order to easily locate the reference information for your appliance, we recommend that you note these data on the "After-Sales Service Department and Customer Relations" page. (This page also explains to you where to find this information on your appliance.) Warning In the case of a kitchen heated by a device connected to a chimney (a stove, for example) the "recycling" version of the hood should be installed. Do not use the hood without metal filters. Suitable ventilation should be provided in the room when the hood is used at the same time as appliances operated by gas or another combustible fuel. 1 / NOTICES FOR THE USER EN · ENVIRONMENTAL PROTECTION -- This appliance's packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. -- Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. -- We thank you doing your part to protect the environment. Warning Installation should only be performed by installers and qualified technicians. Warning Remove the protective film from the filter cartridge before use. 49 EN 1 / NOTICES FOR THE USER · DESCRIPTION OF YOUR APPLIANCE 27 4m m 27 1.5 mm A B 1120 mm 624 mm 150 mm C D 50 90 0 mm 0m m A B Vents Ventilation shaft C D Top surface Control panel 50 2 / INSTALLING YOUR APPLIANCE EN - The appliance must be unplugged during installation or when any repairs or maintenance work is being performed. - Ensure that the network voltage corresponds to the voltage noted on the identification plate located inside the hood. - If the electrical installation at your residence requires any changes in order to hook up your Appliance, call upon a professional electrician. - If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas exhaust duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system. - Under no circumstances should the exhaust duct empty into the attic. - Install the hood at a safe distance of at least 70 cm from an electric, gas or combined cooking hob. · USING THE EVACUATION MODE If you possess an outlet to the exterior (fig. 1) Your hood can be connected to this outlet using a flue (minimum diameter Ø mm that is enamelled, in aluminium, flexible or made of inflammable material). If your flue is less than 125 mm in diameter, you must use the recycling mode. 125 150 fig. 1 · USING THE RECYCLING MODE If you do not possess an outlet to the exterior (fig. 2) All of our appliances can be used in recycling mode. In this case, you should add an active carbon filter which will keep in odours. (See Chapter 4: Changing the carbon filter.) 125 150 fig. 2 51 EN 2 / INSTALLING YOUR APPLIANCE · ELECTRICAL CONNECTIONS During installation and maintenance operations, the appliance must be unplugged from the electrical grid; fuses must be cut off or removed. The electrical connections are made before the appliance is installed in its housing. Ensure that: - the electrical installation has sufficient voltage, - the electrical wires are in good condition, - the diameter of the wires complies with the installation requirements. Warning This appliance is delivered with a H 05 VVF power cord that has three0.75 mm2 conductors (neutral, phase and ground). It must be connected to the main power supply (which should be a 220-240 V single phase current) via a CEI 60083 standardised socket that should remain accessible after installation, in keeping with installation guidelines. We cannot be held responsible for any accident resulting from an inexistent, defective or incorrect ground lead. The fuse for your installation must be 10 or 16A. If the power cable is damaged, call the after-sales service department in order to avoid danger. Warning If the electrical installation at your residence requires any changes in order to hook up your appliance, call upon a professional electrician. Warning If the hood displays any malfunctions, unplug the appliance or remove the fuse corresponding to the electrical socket where your appliance is plugged in. 52 2 / INSTALLING YOUR APPLIANCE EN · ASSEMBLING THE HOOD 5mm x2 Warning The hood must be installed in compliance with all applicable regulations concerning the ventilation of premises. In France these regulations are described in DTU 61.1 from the CSTB. In particular, the evacuated air should never be conveyed to a duct used to evacuate smoke from appliances that use gas or other combustible fuels. Unused ducts may only be used after approval from a competent specialist. The minimum distance between the cooking surface and the lowest part of the hood must be 70 cm. If the instructions for the hob installed under the hood specify a distance of more than 70 cm, this requirement must be respected. -- Draw a horizontal line 70 cm minimum from the cook top (fig. 1). -- Draw a vertical line (B/fig. 1) on the wall that is centred over the cook top and that extends from the horizontal line drawn in the previous step (A) to the ceiling. -- Cut the drilling template by following the dotted lines to obtain two parts, C1 and C2 (fig. 1). -- Place the C2 template (fig. 1) on the wall, superimposing the line that represents the hood's axis over vertical line B (fig. 1) drawn in a previous step. -- Place the C1 template (fig. 1) against the wall flush with the ceiling. -- Drill the six holes. Insert the 6 wall plugs. -- Screw in the top two screws for the hood (D/fig. 1), leaving 5 mm sticking out from the wall. -- Hang the suction hood on the two screws (fig. 2). -- Remove the filter cartridges (F/fig. 3). -- Screw in the bottom two screws (E/fig. 3). C1 B C2 D > 70 cm E = = fig. 1 D fig. 2 Tip Adjust the level of your hood before fully tightening up the four D and E screws. F E fig. 3 53 EN 2 / INSTALLING YOUR APPLIANCE · ASSEMBLING THE VENTILATION SHAFT ·Outdoor evacuation -- Using the two screws (fig. 1), attach the metal chimney bracket against the wall, f ...