® 3000 Owner's Guide limited lifetime consumer warranty For a period of one calendar year from the date of purchase of this auto-security device, Directed Electronics promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model), free of cost, any electronic control module which proves to be defective in workmanship or material under normal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLED. If warranty service is necessary you must have a clear copy of your sales receipt containing all of the information shown on the following page. After the first calendar year, from the date of purchase of this auto-security device, Directed Electronics promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model) any electronic control module which proves to be defective in workmanship or material under normal use FOR A CHARGE OF $45.00, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLED. If warranty service is necessary you must have a clear copy of your sales receipt containing all of the information shown on the following page. This warranty contains the entire agreement relating to warranty and supersedes all previous and contemporaneous representations or understandings, whether written or oral. IN ANY EVENT, DIRECTED ELECTRONICS IS NOT LIABLE FOR THE THEFT OF THE VEHICLE AND/OR ITS CONTENTS. This warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper service or other causes not arising out of defects in materials or construction. This warranty is nontransferable and does not apply to any unit that has been modified or used in a manner contrary to its intended purpose and does not cover batteries. The unit in question must be returned to the manufacturer, postage prepaid. This warranty does not cover labor costs for the removal, diagnosis, troubleshooting or reinstallation of the unit. For service on an out-of-warranty product a flat rate fee by model is charged. Contact your authorized dealer to obtain the service charge for your unit. These systems are a deterrent against possible theft. Directed Electronics is not offering a guarantee or insuring against the theft of the automobile or its contents and disclaims any liability for the theft of the vehicle and/or its contents. Directed Electronics does not authorize any person to create for it any other obligation or liability in connection with this security system. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, TOWING, REPAIR, REPLACEMENT, DAMAGES FOR LOSS © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d i OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPORTANT NOTE: This product warranty is automatically void if its date code or serial number is defaced, missing, or altered. This warranty will not be valid unless you have completed the warranty card and mailed it to Directed Electronics within 10 days after purchase to the address listed on the warranty registration card. Make sure you have all of the following information from your dealer: A clear copy of the sales receipt, showing the following: Date of purchase Your full name and address Authorised dealer's company name and address Type of alarm installed Year, make, model and colour of the vehicle Vehicle registration number Vehicle identification number All security options installed on vehicle Installation receipts trademarks and copyrights Bitwriter®, Clifford®, Code-Hopping®, Directed®, Doubleguard®, ESP®, FailSafe®, Ghost SwitchTM, Learn RoutineTM, Nite-Lite®, Nuisance Prevention® Circuitry, NPC®, Revenger®, Silent ModeTM, Soft Chirp®, Stealth CodingTM, Stinger®, Valet®, Vehicle Recovery SystemTM, VRS®, and Warn Away® are all Trademarks or Registered Trademarks of Directed Electronics. ii © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d table of contents limited lifetime consumer warranty . . . . . . . . . . . . . . . . . . . . .i trademarks and copyrights . . . . .ii table of contents . . . . . . . . . . . . .1 what is included . . . . . . . . . . . . . .2 important information . . . . . . . . .2 your warranty . . . . . . . . . . . . .3 remote configurations . . . . . . . . .4 standard configuration for in-key 2-button remote . . . . . .5 standard configuration for 3-button remote . . . . . . . . . . .5 using your system . . . . . . . . . . . . .6 arming . . . . . . . . . . . . . . . . . . .6 disarming . . . . . . . . . . . . . . . . .8 disarming without a remote . . .8 auto-immobilisation . . . . . . . . .9 remote siren silencing . . . . . . .9 remote chirp muting (3-button remote only) . . . . . .10 remote sensor disable . . . . . .11 remote start sensor bypass . . .11 auxiliary channel bypass . . . . .12 valet mode . . . . . . . . . . . . . . .12 remote valet mode . . . . . . . . .13 instant auto-arming bypass . .14 nuisance prevention® circuitry 14 multiple event total recall . . . .15 battery back-up siren . . . . . . . . .15 diagnostics . . . . . . . . . . . . . . . . . .16 arming diagnostics . . . . . . . . .16 disarming diagnostics . . . . . . .17 arm/disarm diagnostic chart . .17 table of zones . . . . . . . . . . . .18 high frequency . . . . . . . . . . . . . .19 rapid resume logic . . . . . . . . . . .19 power saver mode . . . . . . . . . . .20 system sensors and adjustments 20 programming options . . . . . . . .21 manual programming instructions . . . . . . . . . . . . . .22 user selectable features . . . . .24 user selectable features descriptions - column one . . .24 user selectable features descriptions - column two . . .26 user selectable features descriptions - column three . .27 pin programming . . . . . . . . . .29 glossary of terms . . . . . . . . . . . . .31 security & convenience expansions . . . . . . . . . . . . . . . . . .32 quick reference guide . . . . . . . .33 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d 1 what is included One control module/siren with built-in Tilt sensor and 24 pin main wiring harness (attached) One Mini-Blue status LED One 2-button Valet switch One in-key 2-button remote One 3-button remote Two Merlin decal's This Owner's Guide Warranty Card important information Congratulations on the purchase of your state-of-the-art motorcycle security system. It has been designed to provide years of trouble-free operation. This system must be installed by an authorised dealer. Installation of this product by anyone other than an authorised dealer voids the warranty. As verification of authorization, all authorised dealers are provided with preprinted dealer certificates. In order to maximize the use of this system, please review this owner's guide carefully prior to using your system. You can print additional or replacement copies of this owner's guide by accessing the Directed website at www.directed.com. note: Your system MUST be installed by an Authorised dealer in accordance with the instructions we supply them. The Merlin 3000 system is designed to be installed on any 12-volt, negative ground motorcycle or moped. 2 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d note: Other than the remote controls, this system has no user-serviceable parts. Your authorized dealer can correct any system wiring problems and, if needed, can return any malfunctioning component to Directed Electronics for repair/replacement under the terms of the Limited Lifetime Warranty printed at the beginning of this guide. system maintenance The system requires no specific maintenance. The batteries in your remotes will last approximately one year under normal use. Your 3-button remote is powered by a miniature 3V lithium battery (CR2032). Your in-key 2-button remote is powered by a 12V miniature battery (type 27A). your warranty It is necessary to retain your sales receipt, which reflects that the product was installed by an authorised dealer. For full details regarding your warranty coverage, please refer to the consumer warranty section of this guide. © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d 3 remote configurations The 3000 system has an in-key 2-button remote control and a 3-button remote control. Two additional Merlin remote controls can be added. IN-KEY 2-BUTTON REMOTE CONTROL FRONT REAR LED ARM/DISARM/PANIC ACCESSORY 3-BUTTON REMOTE CONTROL LED ARM/DISARM/PANIC SILENT ARM/DISARM ACCESSORY 4 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d remote functions This system uses computer-based code learning to learn the remote buttons. This makes it possible to assign any remote button to any system function. The remotes initially come programmed with standard configuration. The buttons in all of the instructions in this manual correspond to a standard configuration remote. standard configuration for in-key 2-button remote Button The arming, disarming, and panic functions are controlled by this button. Button An optional accessory convenience or expansion function that you have added to your system can be activated by pressing this button. and Buttons When pressed together, these buttons disable the on-board control module tilt sensor and any optionally installed sensors. standard configuration for 3-button remote Button The arming, disarming, and panic functions are controlled by this button. © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d 5 Button An optional accessory convenience or expansion function that you have added to your system can be activated by pressing this button. Button Silent arm and disarm is controlled by this button. and Buttons When pressed together, these buttons disable the on-board control module tilt sensor and any optionally installed sensors. and Buttons Remotely enters or exits Valet. using your system The buttons used in the instructions in this manual correspond to the standard remote configuration. If your remote has been custom configured, the icons on your remote buttons may not correspond to the indicated functions. arming You can activate, or arm, the system by pressing on your remote for one second. When the system arms, you will hear one short siren sound, or chirp, and see the parking lights flash once. The LED will illuminate steadily. 6 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d While the system is armed, the LED status indicator will flash approximately once per second showing that the system is actively protecting your vehicle. If you hear more than one chirp when arming, refer to the Diagnostics section of this guide. These extra chirps confirm a malfunction autobypass. The security system also can be programmed to arm itself automatically without a remote (called passive arming). If the system is programmed for passive arming, it will automatically arm 30-seconds after the ignition is turned off. Whenever the system is in its 30-second passive-arming countdown, the siren will chirp once and the lights will flash once five seconds after countdown has commenced. This is indicated by the rapid flash from the status LED. The system is not actually armed at that point. The system arms after the 30-second countdown has elapsed, but the siren will not chirp. The early chirps provide you with a 25-second warning prior to arming. note: If one of the zone 4 or 5 switch inputs is active or the ignition is on, the system will not passively arm. Additionally, if one of these switches is activated or the ignition is turned on, the countdown will cease, then begin again when the input is removed. When armed, your vehicle is protected as follows: The ...