User manual DEI RVM700 - Installation Guide

OWNER 'S GUIDE INSTALLATION GUIDE LCD Video Monitor MODEL RVM560, RVM680, RVM700 Table of Contents Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 When Cleaning the Vehicle...........................................................................................................5 While Driving .............................................................................................................................5 When Parked..............................................................................................................................5 Proper Use ...............................................................................................................................6 Repairs ....................................................................................................................................6 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 FCC Notice ................................................................................................................................6 Your Warranty ...........................................................................................................................6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Features ....................................................................................................................................6 Accessories................................................................................................................................6 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Monitor Description ...................................................................................................................7 Maintenance ............................................................................................................................7 On-Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Making Changes to System Settings .............................................................................................8 Setup Menu Descriptions and Operation ........................................................................................9 System Settings Menu ................................................................................................................10 Hardware Options Menu ..............................................................................................................11 Assign Source Names Menu .........................................................................................................12 Assign Trigger Names Menu .........................................................................................................12 Source Names ...........................................................................................................................13 Trigger Names ...........................................................................................................................13 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Monitor Specifications ................................................................................................................14 Installing the Monitor ................................................................................................................14 Removing the Monitor ................................................................................................................14 © 2001 Directed Electronics, Inc. 3 Limited Three-Year Warranty For a period of THREE YEARS from the date of purchase, Directed Electronics, Inc. ("DIRECTED") promises to the original purchaser to repair or replace, free of cost, with a comparable reconditioned model any VIDEO MONITOR (hereafter the "UNIT"), which proves to be defective in workmanship or material defect under normal and reasonable use during the first 3 years after the purchase and installation of the unit provided the following conditions are met: the unit was purchased and installed by an authorized DIRECTED dealer; the unit remains in the vehicle in which the unit was originally installed; and the unit is returned to DIRECTED. The unit in question must be returned to DIRECTED postage paid and must be accompanied by a clear, legible copy of the bill of sale bearing the following information: I I I I I I I I troubleshooting or reinstallation of the unit. For service on an out-of-warranty product a flat fate fee by model is charged. Contact your authorized dealer to obtain the service charge for your unit. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. THE DISPUTE. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER'S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this UNIT. Date of Purchase Your Full name and address Authorized dealer's company name and address Type of unit installed Year, make and model of the automobile Automobile license number Vehicle Identification number Installation receipts All components and accessories other that the unit, including without limitation the remote control, cables and installation accessories carry a 60-day warranty from the date of purchase of the same. This warranty is automatically void if the unit is bought from anyone other than an authorized dealer, the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; or the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in workmanship, materials or construction. This warranty is nontransferable and does not cover batteries. This warranty does not cover labor costs for the removal, diagnosis, 4 © 2001 Directed Electronics, Inc. Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED HARDWARE. THIS MONITOR IS ONLY DESIGNED FOR REAR SEAT PASSENGER VIEWING AND IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION. SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE SAFE OPERATION OF THE VEHICLE, AND MAY ALSO VIOLATE STATE LAW. DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT. I Only operate the monitor as described in this guide. Attempts to use or modify this monitor contrary to the descriptions in this guide may cause damage and void the warranty. Extremes in temperature can cause abnormal display operation. This monitor has an optimal operating temperature range between 35-115 degrees Fahrenheit. If the vehicle interior is outside this range, do NOT operate the monitor until the temperature is within its operating range. I Exposure to moisture or dust can cause harmful damage to the internal electronics. Do not mount near cup holders or in areas where spills may occur. This monitor is designed for use in vehicles with standard (-) 12 volt ground electrical systems. Do not operate for an extended period of time without the engine running or the vehicle's battery voltage may drop to damaging levels. I I I Important Safeguards WHEN CLEANING THE VEHICLE Do not spray this unit with water or cleaning solutions. Moisture and the chemicals found in cleaning fluids could damage the consoles finish and interior electronics. WHEN PARKED The screen is easily removable. Always remove or close the screen when parking for an extended period of time to avoid potential theft or extended exposure to direct sunlight. WHILE DRIVING This unit is intended for use in the rear seat area only. It should not be installed in a location that would allow the driver to view it while driving. © 2001 Directed Electronics, Inc. 5 PROPER USE Do not touch the screen unless cleaning with a soft dry cloth. Do not pull or hang from the fold down monitor door. REPAIRS If the monitor stops working for any reason, discontinue use immediately and consult with your retailer about any necessary repairs Important Information FCC NOTICE This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly YOUR WARRANTY Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. Make sure you receive the warranty registration from your dealer. It is also necessary to keep your proof of purchase, which reflects that the product was installed by an authorized dealer. approved by the party responsible for compliance could void the user's authority to operate this device. Features FEATURES I I I I I I I ACCESSORIES I I Integrates with Directed Video's Overhead Console System. RCA video inputs for system flexibility. Easy to use adjustment controls. Wireless remote control receiver built-in. TFT active matrix LCD screen. Front panel controls. On-screen display/programming. 5 m DIN-RCA video cable. Hot Foot adapter Note: This manual makes reference to optional Directed Video parts not included with this product. 6 © 2001 Directed Electronics, Inc. Basic Operation 2 1 4 56 43 MONITOR DESCRIPTION 1. 2. Screen - TFT active matrix LCD screen. Power/Source button - Press to turn the monitor on/off or change video source. I MAINTENANCE Keep the monitor clean and free of dust and moisture and it will provide years of trouble free operation. Do not allow any cleaning fluids on the monitor screen or bezel, they may contain chemicals that can harm the finish and diminish the picture quality. To clean the monitor, simply use a soft, dry cloth and gently wipe away any dirt. Avoid applying too much pressure to the screen when cleaning as it can result in damage. 3. 4. Press to turn the monitor on. I Press for more than three seconds to turn the monitor off. I Press for less than three seconds when on to change the source. IR remote input - For remote control operation. Up/down buttons - Adjusts programming when MODE is pressed. Also adjusts TV/CATV channel up and down when TVM300 module is connected. Mode button - Changes up/down buttons functions. LED indicator light - When turned on the light is blue; when on standby the light is red. 5. 6. © 2001 Directed Electronics, Inc. 7 On-Screen Menus The Setup Menu is a list of programming selections that control system operation and screen settings. Each selection has a list of settings that can be changed to optimize system operation. Some settings may have additional settings. Notes that include any specific programming instructions for these are included under the selection heading. SETUP MENU USINGTHE UNIVERSAL REMOTE CONTROL (Included with MCB1000) NOTE: For a guide to remote control button locations refer to the MCB1000 guide. Basic Operation section of this guide. 1. 2. 3. 4. 5. Press MODE to enter the Setup Menu. Press UP or DOWN to highlight the selection. Press MODE to enter that selection Menu. Press UP or DOWN to highlight the setting. Press MODE to change the setting, display additional settings menus, or toggle through a list of possible settings. 1. 2. 3. 4. 5. 1. 2. 3. Channel - Appears if the TVM300 is connected and TV is the source. Screen - Appears in the RVM700 monitor menu only. Security - Applies when ESP/ESP2 security systems are connected; only ESP2 will display trigger zones. Setup - Appears if the MCB 1000 Expanded Menu switch is on. 2. Press MENU to enter the Setup Menu. Press (+) or (-) to highlight the selection. Press MENU to enter that selection menu. Press (+) or (-) to highlight the setting. Press MENU to change the setting, display additional setting menus, or toggle through a list of possible settings. EXITING MENUS After making setting changes, use the following steps to exit the menus. 1. Highlight BACK, press the monitor's MODE button or the remote's MENU button to return to the previous menu Highlight EXIT, press monitor's MODE button or the remote control's MENU button or make no entry for eight seconds, you will exit all menus and return to the current video source display. 4. MAKING CHANGES TO SYSTEM SETTINGS USING THE MONITOR CONTROL BUTTONS NOTE: For a guide to monitor button locations refer to 8 © 2001 Directed Electronics, Inc. SETUP MENU DESCRIPTIONS AND OPERATION Following are explanations of the many settings that can be changed to customize the operation of your Rear Seat Entertainment system. To change the settings described, follow the directions in the on-screen menus section or the special instructions in each menu. SELECTION CHANNEL (TVM300 ONLY) DIMMER DESCRIPTION AND OPERATION I I I I I I Change TV channels. Use CHDN/CHUP buttons to change channels Change illumination for day or night viewing. HIGH - Sets illumination for viewing in daylight. MEDIUM - Sets illumination for viewing in twilight. LOW - Sets illumination for viewing at night. Select to adjust picture. BRIGHTNESS - Adjusts picture brightness. COLOR - Adjusts picture color. CONTRAST - Adjusts picture contrast. HUE - Adjusts picture hue (NTSC only). WIDESCREEN (16:9) - Wide screen videos will appear undistorted and fit the full screen. Normal videos (4:3) will be stretched from the sides to fit the full screen and appear distorted. NORMAL (4:3) - Normal videos will appear undistorted in the center with bars at both sides. Wide screen videos (16:9) will shrink to fit into the same area and make the image appear taller. PROGRESSIVE - Normal videos (4:3) will fit the full screen. The center of the picture will appear normal with the edges stretched to fit the full screen and appearing slightly distorted. ZOOM - Normal videos (4:3) will fit the full screen. The picture will be zoomed in to fit the full screen from side to side. The picture will remain undistort ed, but a portion of the top and bottom will be cut off. Select to change the color of the on-screen display. WHITE - Changes the OSD to White. GREEN - Changes the OSD to Green. BLUE - Changes the OSD to Blue. PICTURE Note: To adjust use the monitor's UP/DOWN buttons or the remotes (+)/(-) buttons. I I I I I I SCREEN (RVM700 ONLY) I I I OSD COLOR I I I I © 2001 Directed Electronics, Inc. 9 SECURITY (ESP/ESP2 ONLY) NOTE: This menu contains selections that have additional settings. I I I ESP/ESP2 programming and zone information. TRIGGER INFORMATION - Displays ESP/ESP2 zone information. (Always displays the last zone triggered only.) See the Assign Trigger Names menu. SYSTEM SETTINGS - Displays the System Settings menu. See the System Settings menu. Change hardware settings and rename zones. HARDWARE OPTIONS - Displays the Hardware Options menu. See the Hardware Options menu. ASSIGN SOURCE NAMES - Displays the Source Names menu. See the Source Names menu for a list of names. ASSIGN TRIGGER NAMES - Displays the Trigger Names menu. See the Trigger Names menu. SETUP (MCB1000 ONLY) NOTE: This menu contains selections that have additional settings. This menu is used for initial system setup only. I I I I IMPORTANT! Any changes in the following menus must be written into the MCB1000 and ESP/ESP2 software. Before the menu is exited the "write to system" procedure must be completed. SYSTEM SETTINGS MENU SELECTION PASSIVE/ACTIVE ARMING (passive) DESCRIPTION AND OPERATION Program the ESP/ESP2 security system to arm by itself or if its remote must be used for arming (active). For a full description of this setting refer to your ESP/ESP2 owner's guide. CHIRPS ON/OFF This feature will turn the arming and disarming chirps on/off. For a full description of this setting refer to the ESP/ESP2 owner's guide. When turned on, the doors will lock three seconds after the ignition is turned on. For a full description of this setting refer to the ESP/ESP2 owner's guide. When turned on, the doors will unlock when the ignition is turned off. For a full description of this setting refer to the ESP/ESP2 owner's guide. This feature controls whether the doors will lock when the ESP/ESP2 security system passively arms itself. For a full description of this setting refer to your ESP/ESP2 owner's guide. IGNITION LOCK ON/OFF IGNITION UNLOCK ON/OFF PASSIVE/ACTIVE LOCKING 10 © 2001 Directed Electronics, Inc. WRITE TO SYSTEM I I I I Highlight WRITE TO SYSTEM, press the monitor's MODE button or the remotes MENU button to enter the system changes. WRITING TO SYSTEM will be displayed. WRITE SUCCESSFUL - Information entered successfully. WRITE FAILED - Information not entered successfully. HARDWARE OPTIONS MENU SELECTION POWER AUTO OFF DESCRIPTION AND OPERATION I I I Select to choose POWER AUTO OFF or POWER LAST STATE. POWER AUTO OFF - When the key is turned on the system power will remain off, regardless of the system on/off state when the key was turned off. POWER LAST STATE - When the key is turned on the system will automatically return to the power on/off state it was in when the key was turned off. Select to let the MCB1000 know an FM modulator is connected. FM MODULATOR - allows the universal remote to turn the FM modulator on/off. NO FM MODULATOR - FM modulator control is defeated. This FM Modulator function only applies when the RFM100 is connected. Select to choose Antenna or Cable input to TVM300. Select ANTENNA TV when the TVA10 antenna is connected to the TVM300. Select CATV when using a cable TV connection to the TVM300. Choose between three types of cable TV setups. Highlight WRITE TO SYSTEM, press the monitor's MODE button or the remotes MENU button to enter the system changes. WRITING TO SYSTEM will be displayed. WRITE SUCCESSFUL - Information entered successfully. WRITE FAILED - Information not entered successfully. FM MODULATOR I I I I ANTENNA TV I I I CATV STD WRITE TO SYSTEM I I I I I © 2001 Directed Electronics, Inc. 11 ASSIGN SOURCE NAMES MENU NOTE: In this menu use the monitor's MODE button or the remote's MENU button to toggle through the available choices for source names. SELECTION SOURCE 1: AV1 SOURCE 2: AV2 SOURCE 3: AV3 WRITE TO SYSTEM DESCRIPTION AND OPERATION Select to change the name of source 1 from the source names list at the end of this section. Select to change the name of source 2 from the source names list at the end of this section. Select to change the name of source 3 from the source names list at the end of this section. I I I I Highlight WRITE TO SYSTEM, press the monitor's MODE button or the remotes MENU button to enter the system changes. WRITING TO SYSTEM will be displayed. WRITE SUCCESSFUL - Information entered successfully. WRITE FAILED - Information not entered successfully. ASSIGN TRIGGER NAMES MENU NOTE: In this menu use the monitor's MODE button or the remote's MENU button to toggle through the available choices for zone names. SELECTION ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 DESCRIPTION AND OPERATION Select to change the name of zone 1 from the zone names list at the end of this section. Shock sensor - Can not be changed. Door switch - Can not be changed. Select to change the name of zone 4 from the zone names list at the end of this section. Ignition - Can not be changed. Select to change the name of zone 6 from the zone names list at the end of this section. Select to change the name of zone 7 from the zone names list at the end of this section. 12 © 2001 Directed Electronics, Inc. ZONE 8 WRITE TO SYSTEM Select to change the name of zone 8 from the zone names list at the end of this section. I I I I Highlight WRITE TO SYSTEM, press the monitor's MODE button or the remotes MENU button to enter the system changes. WRITING TO SYSTEM will be displayed. WRITE SUCCESSFUL - Information entered successfully. WRITE FAILED - Information not entered successfully. SOURCE NAMES I I I I I I TRIGGER NAMES I I I I I I I SOURCE X: VCR SOURCE X: DVD SOURCE X: GAME SOURCE X: CAMERA SOURCE X: REAR CAMERA SOURCE X: AUX INPUT PANEL ZONE X: HOOD/TRUNK SWITCH ZONE X: HOOD SWITCH ZONE X: TRUNK SWITCH ZONE X: FIELD SENSOR ZONE X: MOTION/TILT SENSOR ZONE X: GLASS BREAK SENSOR ZONE X: SHOCK SENSOR 2 © 2001 Directed Electronics, Inc. 13 Installation MONITOR SPECIFICATIONS RVM 560 Screen size Resolution View angle 5.6" 74,880 pixels Top 10 degrees Bottom 30 degrees Left 45 degrees Right 45 degrees ntsc/pal Video system Osd language Power requirements Operating temp. ntsc/pal English 10 - 15 vdc 35 - 115 degrees fahrenheit INSTALLING THE MONITOR All monitors that work with the OHC100 attach to the monitor door in the same way. I Video system Osd language Power requirements Operating temp. English 10 - 15 vdc 35 - 115 degrees fahrenheit I Start with the monitor door in the viewing position. At both bottom corners of the monitor are spring-loaded monitor mounts. Place one of these against the mounting bracket (2) and guide the other end of the monitor into the bracket on the other side of the monitor. Tilt the monitor up into the mount and press firmly until a click is heard. The connector at the back of the monitor is selfguiding and will connect automatically to the monitor connector (4). The Hot Foot adapter is for use with the MMS1 Universal Monitor Mounting Pedestal. Place the Hot Foot adapter mounting plate onto the monitor connector and secure using the provided machine screws. RVM 680 Screen size Resolution View angle 6.8" 89,856 pixels Top 10 degrees Bottom 30 degrees Left 45 degrees Right 45 degrees ntsc/pal English 10 - 15 vdc 35 - 115 degrees fahrenheit I I Video system Osd language Power requirements Operating temp. REMOVING THE MONITOR I RVM 700 Screen size Resolution View angle 7.0" 112,320 pixels Top 60 degrees Bottom 30 degrees Left 60 degrees Right 60 degrees With the monitor door in the viewing position, press the monitor release button (1). At the same time, gently tilt the top of the monitor down. Firmly hold the monitor while pressing to one side and pull away from the monitor door. 14 © 2001 Directed Electronics, Inc. Monitor Connector Monitor Mounts © 2001 Directed Electronics, Inc. 15 The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more information about our products and services. Directed® is committed to delivering world-class quality products and services that excite and delight our customers. Directed Electronics, Inc. Vista, CA 92083 www.directed.com © 2001 Directed Electronics, Inc. - All rights reserved RVM Series Rev. 1.0 12-01