VA200 2ND MONITOR ADAPTER The VA200 is a video signal splitter. It takes the MCB1000 zone output DIN cable and splits the video and IR signal so additional monitors can be added to that output zone. The master monitor will still have full IR control of all MCB1000 programming menus. The slave monitor has IR control of its screen settings menus and basic operations of the video source units. The slave monitor will receive its audio input from the audio RCA zone outputs. Other audio output options include wireless headphones (RFM100 and WHS100). 6. 5. 4. 3. INSTALLATION 1. 2. Connect the VA200 DIN cable to the DIN output of the MCB1000. Connect the VDC100 DIN-DIN cable to the VA200 DIN out and route it to the master monitor. Connect the VDC200's video RCA (YELLOW) to the video output RCA of the VA200. Connect the VDC200's IR plug to the IR connector of the VA200. Connect the VDC200's Audio RCA's (RED and WHITE) to the RCA audio outputs of the MCB1000. Route the DIN plug end of the VDC200 to the slave monitor. N85301 12-01 © 2001 Directed Electronics, Inc. ...