DellTM W2607C LCD TV Display Owner's Manual Model W2607C w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your LCD TV display. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2006 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, Dimension, OptiPlex, Dell Precision, Latitude, Inspiron, DellNet, PowerApp, PowerEdge. PowerConnect, ® PowerVault, EMC and the DELL logo are trademarks of Dell, Inc.; TruSurround XT, SRS, and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. February 2006 Rev. A00 Contents 1 About Your LCD TV Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Front View. ................................ .............................. .............................. 5 6 7 8 9 Right Side View Left Side View . Bottom View. ............................... ............................. Package Contents 2 Setting Up Your LCD TV Display . . . . . . . . . . . . . . . . . . . . . . . . .11 Proper Location for Your LCD TV Display Connecting Your LCD TV Display .................. 11 11 13 ...................... .............. Connecting Your Computer to the LCD TV Display 3 Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Installing Batteries ............................ ........................ .. 19 20 22 Using Your Remote Control . Using Your LCD TV Display With a Universal or Learning Remote Control. 4 Using the TV Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using Your Remote Control With the TV Menu. Selecting Your TV Menu Language Input Select Menu . ............... 23 24 24 25 26 26 ..................... ............................ .......................... Picture Settings Menu . Audio Settings Menu. Size Menu . ........................... ................................ Contents 3 Parental Control . Setup Menu Sleep Timer ............................. 27 28 29 29 ................................ ................................ .............................. Closed Caption 5 Troubleshooting Your LCD TV Display . . . . . . . . . . . . . . . . . . . .30 Troubleshooting Tips. General Problems ........................... 30 31 35 36 ............................. ............................ ......................... TV Menu Messages Remote Control Problems Using the Self-Test Feature When Your LCD TV Display is Connected to Your Computer ............................. .......... 36 37 Problems When Using the LCD TV Display as a Monitor . 6 7 Specifications for Your LCD TV Display. . . . . . . . . . . . . . . . . . .38 Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 .................................... Index 59 4 Contents 1 About Your LCD TV Display Front View 2 1 1 2 IR receiver Power indicator light (LED) Senses the signal from the remote control. The light is blue when the LCD TV display is on and amber when the LCD TV display is in power save mode. About Your LCD TV Display 5 www.dell.com | support.dell.com Right Side View 7 6 5 4 3 2 1 1 Power button Press to turn the LCD TV display on and off. The power button is blue when it is on and amber when it is in power saving mode. Press to enable the TV Menu. 2 OK TV Menu menu button 3 4 5 6 7 Volume button Volume button Channel button Channel button Input Select button Press to decrease the volume. Press to increase the volume. Press to select the previous channel or navigate through the TV Menu. Press to select the next channel or navigate through the TV Menu. Press to display the Input Select menu. 6 About Your LCD TV Display Left Side View 1 2 3 4 1 2 3 4 AV SIDE (S-Video 2) AV SIDE (Composite 2) AV SIDE audio connector Headphone connector Connect devices such as a video game system or a VCR. Connect devices such as a VCR or DVD player. Use the audio connector if you have connected a device to AV SIDE connectors. Connect headphones. About Your LCD TV Display 7 www.dell.com | support.dell.com Bottom View 12 5 7 9 11 13 3 4 6 8 10 12 1 2 3 4 5 6 7 8 9 DVI audio connector (L / R) VGA DVI connector Audio connector for VGA or DVI NTSC/Analog Cable HDTV/Digital Cable Composite out/Audio Out (L/R) Composite out/Video Out Composite video and audio connectors (AV1) Use the DVI audio connector if you have connected a device such as a DVD player to the DVI connector. Connect your computer. Connect your computer or video devices such as a DVD player. Connect the audio cable from your computer to the LCD TV Display. Connect analog cable TV box or an analog antenna. Connect digital cable TV box or a digital antenna. Connect to VCR (L/R) audio inputs. Connect to VCR video input. Connect devices such as a VCR or DVD player. 10 S-Video video and audio connectors Connect devices such as a video game system or a VCR. (AV2) 11 Component video and audio connectors (AV3) 12 Component video and audio connectors (AV4) 13 Power connector Connect devices such as a DVD player or cable TV box. Connect devices such as a DVD player or cable TV box. Connect your power cord. 8 About Your LCD TV Display Package Contents NOTE: If you need additional cables, contact Dell. Remote control AAA batteries (2) Power cord Component video cable Audio cable About Your LCD TV Display 9 www.dell.com | support.dell.com Coaxial cable Documentation: Setup Guide Product Information Guide Owner's Manual 10 About Your LCD TV Display 2 Setting Up Your LCD TV Display CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Proper Location for Your LCD TV Display Consider the following environmental factors when you are deciding where to install your LCD TV display: · · · · · Do not store or use the LCD TV display in locations that are exposed to high heat, direct sunlight, or extreme cold. Avoid moving the LCD TV display between locations with extreme temperature differences. For more information, see "Specifications for Your LCD TV Display" on page 38. Do not subject the LCD TV display to severe vibration or high impact conditions. Do not place the LCD TV display inside a car trunk. Do not store or use the LCD TV display in locations where the LCD TV display would be exposed to high humidity or dusty environment. Do not place the LCD TV display in a location where water or other liquids could spill on or into the LCD TV display. Connecting Your LCD TV Display Your LCD TV display has four standard connectors that can be used to connect devices. NOTE: Before you connect your LCD TV display, ensure that you have all the proper cables. Some cables may come with the device you are connecting. For a list of cables that came with your LCD TV display, see "Package Contents" on page 9. To order additional cables, contact Dell. Quality Good Cable and Connector When to Use Coaxial (RF) carries the video and audio from one cable. The coaxial connector is labeled, NTSC/Analog Cable or HDTV/Digital Cable on your LCD TV display. To locate the connector, see "Bottom View" page 8. Setting Up Your LCD TV Display 11 www.dell.com | support.dell.com Quality Good Cable and Connector When to Use Composite carries the video signal through a single pin. If you are using a composite video connector you also need to connect composite audio connectors. To locate the connector, see "Left Side View" page 7. Better S-Video splits the video signal into two signals, black-and-white and color. To locate the connector, see "Left Side View" page 7. Best Component splits the video signal into three signals, two color and one black-and-white. To locate the connector, see "Bottom View" page 8. 12 Setting Up Your LCD TV Display Connecting Your Computer to the LCD TV Display Your LCD TV display has two standard connectors that can be used to connect your computer. NOTE: The type of connector you use depends on the graphics card your computer supports. For additional information about graphic cards, see your computer documentation. Quality Good Cable and Connector When to Use A standard graphic display system for computers that uses an analog signal and can support resolutions up to 1360 x 768. Better A digital signal that can support digital and convert analog to digital. DVI can be used for high resolution display and can support resolutions up to 1360 x 768. Connect the audio cable from your computer to the LCD TV Display Audio connector for VGA or DVI. Setting Up Your LCD TV Display 13 www.dell.com | support.dell.com Using NTSC/Analog and HDTV/Digital 1 2 3 4 Turn off the LCD TV display and unplug the power cord. Connect the coaxial cable to the NTSC/Analog Cable connector of the LCD TV display. Plug in the power cord for the LCD TV display and turn on the LCD TV display. Enter the TV Menu and select TV Analog. For additional information about the Input Select menu, see "Input Selection Menu" page 24. 1 2 3 4 Turn off the LCD TV display and unplug the power cord. Connect the coaxial cable to the HDTV/Digital Cable connector of the LCD TV display. Plug in the power cord for the LCD TV display and turn on the LCD TV display. Enter the TV Menu and select TV Digital. For additional information about the Input Select menu, see "Input Selection Menu" page 24. 14 Setting Up Your LCD TV Display Using the Composite Connector 1 2 3 4 Turn off the LCD TV display and unplug the power cord. Connect video and audio cables from your device to LCD TV. Plug in the power cords for the LCD TV display and device and turn the power on. Enter the TV Menu and select the AV SIDE (Composite 2). For additional information about the Input Select menu, see "Input Selection Menu" page 24. Setting Up Your LCD TV Display 15 www.dell.com | support.dell.com Using the S-Video Connector 1 2 3 4 Turn off the LCD TV display and unplug the power cord. Connect video and audio cables from your device to LCD TV. Plug in the power cords for the LCD TV display and device and turn the power on. Enter the TV Menu and select the AV SIDE (S-Video 2). For additional information about the Input Select menu, see "Input Selection Menu" page 24. Using the Component Connectors 1 2 3 4 Turn off the LCD TV display and unplug the power cord. Connect video and audio cables from your device to LCD TV. Plug in the power cords for the LCD TV display and device and turn the power on. Enter the TV Menu and select the AV3 (Component 1) or AV4 (Component 2). For additional information about the Input Select menu, see "Input Selection Menu" page 24. 16 Setting Up Your LCD TV Display Using the DVI Connector NOTE: Only one connector can be used for a computer, either VGA or DVI. Connecting a Video Device Connecting a Computer 1 2 3 Turn off the LCD TV display and unplug the power cord. Connect the white DVI cable to your LCD display TV and to the video device or your computer. Connect the audio cables. If you are connecting a video device, use the audio connectors (red and white) or if you are connecting a computer use the stereo connector (green). NOTE: Some cable TV boxes may have DVI connectors, but do not support using a DVI connection. For more information, contact your cable TV company. 4 5 Plug in the power cords for the LCD TV display and device and turn the power on. Enter the TV Menu and select the DVI. For additional information about the Input Select menu, see "Input Selection Menu" page 24. Setting Up Your LCD TV Display 17 www.dell.com | support.dell.com Using the VGA Connector NOTE: Only one connector can be used for a computer, either VGA or DVI. 1 2 3 4 5 Turn off the LCD TV display and unplug the power cord. Connect the blue VGA cable to your LCD TV display and to your computer. Connect the green audio cable to the connector on the LCD TV display and to your computer. Plug in the power cords for the LCD TV display and computer and turn the power on. Enter the TV Menu and select the VGA. For additional information about the Input Select menu, see "Input Selection Menu" page 24. 18 Setting Up Your LCD TV Display 3 Your Remote Control Installing Batteries Before you can use ...