SA10035 User Guide Satellite Radio Receiver IMPORTANT: The FCC and FAA have not certified the Delphi XM Roady Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, Delphi cannot support this type of application or installation. 3 Welcome Thank you for purchasing a Delphi XM® RoadyTM Satellite Radio Receiver. Your Roady Receiver gives you access to over 100 XM Satellite Radio channels of music, news, and information.* Your Roady Receiver must be used with the enclosed connecting devices to ensure maximum performance and safety. *XM subscription required for reception. Not available in Alaska or Hawaii. Warning: Do not modify or alter wires or connections in any way. Shortening wires or connections may prevent proper functioning of the protection circuit. Doing so may damage your receiver and will void your warranty. 4 About Roady Roady is the latest in the acclaimed line of portable devices from Delphi XM Satellite Radio and represents the best in audio technology. Small, simple, and easy to use, Roady is always ready to go with you. Just plug it in and go! About Delphi Delphi is a worldwide leader in mobile electronics and transportation components of audio technology. Delphi created the first in-dash car radio decades ago, and is responsible for many audio innovations through the years. Now Delphi technology has helped make satellite radio a reality, and Delphi continues to expand its in-vehicle and consumer electronics technologies. Delphi has a broad portfolio of products to answer a wide variety of information and entertainment needs. About XM One big idea can change everything. And XM Satellite Radio is one big idea: Radio to the Power of X®. America's most popular satellite radio service gives you the power to choose what you want to hear--wherever and whenever you want it. XM offers 70 music channels--more than any other satellite radio service--plus 30 channels of news, talk, sports, and entertainment. That's 100 basic channels in all, for a low monthly subscription. Additional devices may qualify for a reduced subscription fee through the XM Family Plan. 5 Contents Section 1 Getting Started: Activating Roady . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Section 2 Roady Receiver Roady Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Roady Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Section 3 Basic Operations Turning Roady On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Basic Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Save and Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Section 4 Menu Commands and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Section 5 Installation Roady Kit Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Roady Receiver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 XM Antenna Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Section 6 Reference Taking Care of Your Roady . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Contacting Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Section 7 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 6 Getting Started: Activating Roady To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps: 1. Set up your Roady Receiver using the installation instructions in Section 5 of this guide (see page 15) or with the help of a professional installer. 2. Press the power button to turn the Roady Receiver on and verify that it is playing Channel 1, the XM Preview Channel. 3. Select Channel 0. The receiver's eight-character XM Satellite Radio ID number will appear on the display. Write the number here: Section 1 Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used. 4. Activate your XM Satellite Radio service. To subscribe, make sure you have a major credit card and your XM Satellite Radio ID number handy and contact XM at http://activate.xmradio.com. You can also activate your service by calling 1-800-852-9696. Note: You will need to keep your Roady on for at least one hour after activation and installation to receive the full channel lineup. Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage. Caution: Failure to properly follow all installation instructions may result in personal injury or damage to your Roady or to your vehicle. 7 Roady Receiver Roady Display Screen While tuned to an XM channel, the Roady default display contains information about that channel and the Roady settings. See figure 1. Your Roady display can be customized. See the Basic Operations section, beginning on page 10. Signal-strength indicator (zero to three bars) Display mode indicator Category search indicator Keypad mode (Direct, Preset A, Preset B, or Preset C) Section 2 Channel name and number Artist name Display Option 1 Display Option 2 Display Option 3 Figure 1. Roady Receiver display screens. 8 Roady Controls Section 2 Control keys Category search Tuning Wheel (inset on corner of unit) Power button Infrared lens Number keys Figure 2. Roady Receiver. 9 The Roady unit has seven function buttons, a Tuning Wheel, and 10 number keys. Turns the Roady Receiver on or off. The display button toggles between three display options: 1. Channel name, channel number, artist name 2. Channel name, channel number, song title 3. Artist name, song title Press Memory to save artist name and song title information. Press and hold memory key to recall information. Press Menu to select and change receiver configuration options. Pressing Menu when in menu mode will allow the user to back out to the previous level. Switches between Direct Entry, Preset A, Preset B, and Preset C. Enters category search and displays channels grouped by category. Continued presses step through available categories. Use the Tuning Wheel to scroll through channels within a category; press the Tuning Wheel in to select a channel. Category search times out after 6 seconds if no channels are selected. Use the Tuning Wheel to scroll through channel or menu options. Pressing the Tuning Wheel selects a channel or menu option. 1 display memory menu preset/direct category Number keys are used to select a channel directly (when in Direct Entry mode), and to select or set presets when in a Preset mode. 10 Basic Operations Turning Roady On and Off Press on the Roady Receiver. When first turned on, the receiver will automatically tune in to the last channel listened to and recall the previous settings. Section 3 Basic Channel Selection Select a channel by number 1. Verify that Roady is in Direct Entry mode. "Direct" should appear in the preset/direct upper right corner of the display. If A, B, or C appears, press until the display says "Direct." 2. Enter channel number using the number keys, i.e., 5 + 0 for Channel 50. Set/select channel presets Your Roady Receiver can store up to 30 preset channels. They are organized into three different groups (Preset A, Preset B, and Preset C), each with 10 channels corresponding to the 10 number keys. For preset 10, you only need to press "0." Selecting channel presets Press until an A, B, or C appears in the upper right corner of the display. Press the number key corresponding to the desired preset. preset/direct Setting channel presets 1. Tune in the channel you want to register as a preset, making sure it is playing. preset/direct 2. Select either Preset A, Preset B, or Preset C by pressing until an A, B, or C appears in the upper right corner of the display. 11 3. Press and hold the number key corresponding to the preset you would like to set. The receiver will beep to indicate that the preset is registered. 4. Pressing a number key in preset mode without having saved a number to that preset will cause the Roady to display the number and then switch to Channel 1. Preview and select channels using the Tuning Wheel You can use your Roady to preview the XM channel lineup, see what is currently playing, and then decide if you want to leave your current channel. 1. Roll the Tuning Wheel up or down repeatedly (hold to move quickly) to scroll through the channel lineup. 2. Select a channel by pressing the Tuning Wheel in. If you do not select a channel, the display will time out and return to the channel you are listening to. Tune to a channel using the Tuning Wheel (option) Tune up and down the channel list using the Tuning Wheel . Using the Tuning Wheel allows you to tune automatically to the next channel, without highlighting or selecting. To activate this mode, go to "Direct Tune" option in the menu section. 12 Select a channel by category category Press either of the category keys to enter category search. category 1. Continue pressing one of the category keys until a category you are interested in appears. 2. Use the Tuning Wheel to display a channel within the given category. 3. Press the Tuning Wheel to select a channel. 4. If you do not select a channel, category search will time out after several seconds. Section 3 Save and Recall Artist Name and Song Title Information You can save the artist name and song title on the current channel for future reference. memory 1. Press and release to save the current screen information. Up to 15 different artist and song titles can be saved, after which any new information that is saved will replace the oldest information in memory. memory 2. To recall saved information, press and hold for 3 seconds. Next, use the Tuning Wheel to display each saved artist name/song title. 13 Menu Commands and Settings Pressing enters the menu section of Roady. Here, you can change each of the following options using the Tuning Wheel . Select the highlighted item by menu pressing the Tuning Wheel . While in the menu section, acts as a "back" button, allowing you to back out of existing sections. Following are the settings that can be changed: menu Section 4 Screen Color Change the color of the display by simply using the Tuning Wheel to scroll through the seven color choices. Select a new color by pressing the Tuning Wheel . Audio Level Use this to adjust the Roady Receiver audio-output level if it is too high, causing distortion, or too low for your car. Most users will NOT need to change this level from the factory setting. This is not a volume control. You should set the volume using the audio system connected to your Roady Receiver. Contrast This control allows you to adjust the contrast of your display. Auto-On Once you have installed your Roady and the power has been turned on using the power button , you will discover your Roady has been factory-set to be turned off and back on again using the ignition key in your vehicle. To change this factoryset condition and always power your Roady on and off with the power button , select the "Auto-On" feature in the menu and then select "Off." 14 Auto-Off You can set your radio to automatically shut off 60, 120, or 180 minutes after it is turned on. This feature should be used if your vehicle continues to power the cigarette lighter/auxiliary power after you remove your key, so if you leave it on, Roady will shut down automatically after the time period you select and will not drain your battery. Section 4 TuneSelectTM Using this function, you can program your Roady to alert you with a tone and display change when a favorite song is played again on a channel other than the one you are listening to. 1. While the song is playing, press and hold the Tuning Wheel in for 2 seconds. Roady will beep and display "Song Selected" on line 1 of the display for 2 seconds, then return to normal display for the current song. Up to 10 songs may be stored in the TuneSelect list. Once the list is filled, a new entry will replace the oldest item on the list. You can erase songs from your TuneSelect list by going into the menu and choosing TuneSelect. Then, follow your options to erase specific song titles or clear out all titles. 2. When the song plays again on any channel other than the one you are currently listening to, your Roady will beep and display an alert notice. "Song Found" will appear on line 1 and the name of the song on line 2 for 5 seconds. 3. While the "Song Found" alert is ...