User manual DELPHI ROADY SA10069 - Install Guide

8816DM Roady Card Keys 6/25/04 8:06 AM Page 1 XM Satellite Radio Accessory Products Limited Consumer Warranty Delphi Product and Service Solutions ("Delphi") warrants all Portable XM Satellite Radio Accessory Products sold by Delphi ("Products") to be free of defects in material and workmanship, subject to the following conditions: The duration of Delphi's warranty with respect to Delphi Portable XM Satellite Radio Accessory Products is limited to one (1) year from the date of sale to the original consumer purchaser. No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited to the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product. Delphi will, as its sole obligation under this warranty, replace or repair, at its option, any Product that does not conform to this warranty. Products may be repaired or replaced with new or with refurbished items. This limited warranty does not cover defects in appearance, cosmetic, or decorative items, including any non-operative parts. Under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. These remedies are the customer's exclusive remedies for breach of warranty. This limited warranty only extends to customers who purchase the Products in the United States. Delphi will not be responsible for damage resulting from any (i) deviation from Delphi's operating instructions as printed in Delphi's catalog or on any packaging, labels, or other literature provided with a Product, (ii) installation of a Product in a manner which is inconsistent with Delphi's written instructions, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) normal wear and tear, (ix) commercial use, (x) improper storage, (xi) environmental conditions, including excessive temperature or humidity, (xii) service by anyone other than a Delphi authorized repair facility, (xiii) other improper application, installation or operation of the Product, or (xiv) defects or malfunctions of which Delphi is not advised within ten (10) days of the expiration of the limited warranty period. How you (the Customer) can get service: To obtain warranty service, you must return the defective Product with the original receipt to the original place of purchase. If further clarification or additional information is required from Delphi, you may call Delphi at: 1.877.GO DELPHI (1.877.463.3574). If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid, and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair/replacement of any Product. How state law relates to the warranty: Some states do not allow limitations on how long implied warranties last, or the exclusion or the limitation of incidental or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state. NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED WARRANTY. Roady Home Kit Installation Guide For Use With RoadyTM and Roady2TM Satellite Radio Receivers Roady Home Kit Set-up Your Roady Home Kit contains the following components: Set up your Roady Home Kit as follows: Roady Home Stand XM® High-gain Home Antenna Caution: Connect only appropriate input devices to the unit's jacks. Connecting an incorrect input device may damage the system and/or any external electronic device. It is recommended that you use only the A/C power adaptor that came with your Roady Home Kit. If you need to use a different adaptor, it must be a 6V, 100mA DC adaptor and must contain a unified polarity type jack, identified by the symbol. 1. Connect the XM Home Antenna to the jack labeled . 2. Connect the power adaptor to the connector labeled "6V." 3. Connect the ministereo (black connector) end of the audio cable to the jack labeled . Connect the red and white connectors to the input jacks of your audio equipment. Or, connect a set of powered speakers directly to your unit by plugging the speakers' cables directly into the jack. Delphi Corporation 1441 West Long Lake Road · Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI The Roady name, Roady2 name, XM name, and related logos are trademarks of XM Satellite Radio Inc. Printed on Recycled Paper ©2004 Delphi Corporation. All rights reserved. DPSS-04-E-043 www.delphi.com Warning: This guide and the user guide that came with your Roady or Roady2 contain important safety and operating information. Please read and follow the instructions in these manuals. Failure to do so could result in personal injury or damage to your unit or property. 6V A/C power adaptor Remote control Audio cable Figure 1. Roady Home Kit components. Figure 2. Connect components to your unit as shown. 8816DM Roady Card Keys 6/25/04 8:06 AM Page 2 Roady Home Stand Installation 1. Insert the unit into the Roady Home Stand and press the power button. 2. If the display reads "ANTENNA," check that the antenna connection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not authorized yet). If the "ANTENNA" message remains, power down the radio, unplug the antenna, and look for any obvious damage. If no damage is detected, reconnect the antenna, turn the unit back on, and change channels again. If the message still appears, contact your retailer. 3. If the display reads "NO SIGNAL," your antenna needs to be repositioned. See the next section for more information. XM Home Antenna Set-up The position of your antenna must be optimized to receive the strongest possible signal and consistent, mute-free reception. Your unit has a basic signal-strength indicator visible at the top of the display screen during normal listening. It has from zero to three vertical bars; three bars represent the strongest signal. The supplied antenna is a high-gain antenna that can receive XM's signal from one of XM's satellites and/or, depending on where you live, XM's terrestrial repeaters. For best results, the antenna should be positioned near a south-facing window or outdoors with a clear view of the southeastern sky. In some cases, it will be possible to receive XM's signal through standard home walls or a roof. You can install your antenna either indoors or outdoors, following these steps: Indoor installation on a flat surface 1. Set the antenna flat against its base on a flat (horizontal) surface. 2. Turn the base of the antenna so that the XM logo is facing south if you are in the eastern half of the U.S., or to the south/southeast if you are in the western half. 3. If necessary, experiment with different locations until you receive the strongest signal. Your antenna comes with 20 feet of cable. If that is not sufficient to locate the antenna where there is a strong XM signal, purchase a 50-foot cable extension (Delphi model number SA10006) from your retailer. Up to two extensions can be used together for up to 120 total feet of cable. Note: Using more than 120 feet may result in sugnal degredation. Figure 3. Attach unit to the Roady Home Stand as shown. Outdoor installation or indoor wall mounting The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it on a horizontal surface. 1. Holding your antenna up, find a wall location that provides a strong signal. You can use an extension cord to temporarily locate your Roady Home Stand outdoors while optimizing the antenna location. 2. Attach four screws to the wall using the screw-locator pattern in figure 4. Use screws with head sizes small enough to fit in the center of each of the four holes but large enough not to pop out of the elongated sections. Leave 1/8 inch of the screw shanks behind the heads sticking out of the wall. Note: Do not cut the antenna cable and attempt to splice it or attach alternative connectors or cable. The cable and connectors used in your Roady Home Kit are specially chosen and attached at the factory to ensure that they will work with XM's unique frequency band. Use an XM-approved extension kit (Delphi model number SA10006) with your unit. Failure to do so could damage the unit. 1.6 in. (40 mm) 3. Tilt the antenna fully back on the base, place the antenna base on the four screw heads with the antenna pivot on tip, and pull down approximately 1/4 inch until the base is firmly secured. Note that the XM logo will be upside down when the antenna is properly installed. 4. Tilt the antenna away from the wall/base until the signal strength is optimized. 1.4 in. (35 mm) Figure 4. Photocopy this diagram of the screw-locator pattern on the bottom of your XM Antenna to use as a template for wall attachment. Warning: Take note of all electrical wiring and heating ducts near where you are installing the antenna. Use extreme caution when cutting or drilling around these areas. Always wear protective eyewear when using tools. If using a ladder, follow manufacturer's instructions.