User manual DELPHI SKYFI SA10003 - INSTALLATION GUIDE

R a d i o t o t h e p o w e r o f XTM To vehicle audio/stereo To ground (black) + (red) (female) To vehicle 12V power terminal Connecting Delphi XM SKYFi to Your Vehicle With an FM Modulator Note: Connect FM modulator ground terminal to vehicle ground before making any other connections. 12V DC IN TO FM RADIO SKYFi Universal Adaptor FM Modulator DELPHI SA 10003 MADE IN MALAYSIA + (male) (red) 6V DC OUT 88.1MHZ 87.9MHZ 88.5MHZ Connect the red (+) lead to the vehicle 12V power terminal, which is powered when the ignition is in the accessory position. The 12V power connecting cord is permanently connected for SKYFiTM FM modulation. TO FM ANTENNA Frequency switch SKYFi Car Cradle XM Antenna To vehicle AM/FM antenna Audio In AUDIO IN 6V DC In The SKYFi name, XM name, and related logos are trademarks of XM Satellite Radio Inc. Turning on the FM Modulator With ignition in the accessory position, this FM modulator is always on in a standby condition. When you turn on your SKYFi Receiver, the FM modulator will automatically switch the vehicle stereo input from your FM antenna to an XM® Satellite Radio signal. Changing the Transmitting Frequency The FM modulator allows you to change the XM Satellite Radio broadcast signal to an FM frequency and output the sound to your vehicle radio via an FM station. You may experience some interference if a local FM station is broadcasting at the same frequency. If this occurs, change your FM modulator frequency using the switch on the side of the unit. The switch has three frequency settings: 87.9MHz, 88.1MHz, and 88.5MHz. Note: Reset the vehicle stereo frequency to the same value as the FM modulator frequency. Installation Note: The FM antenna connector used to connect the FM modulator to the audio/stereo system may require an additional adaptor. Some audio/stereo systems have AM antennas that require an active bias from your vehicle's audio/stereo system. If AM reception is not restored, try a different adaptor that will allow the active bias to reach the AM antenna. Professional installation is recommended. Printed on Recycled Paper ©2003 Delphi Corporation. All rights reserved. DPSS-03-E-039