Type /W Wiper Unit 2. Mounting configuration - Configuration de montage - Configuración de montage - Einbauforman page 2 Fig.2. Mounting configuration - Configuration de montage - Configuración de montage - Einbauforman 515, 516 or 517 Housing Wiper Blade Washer Nozzle Water Outlet Tube M4 Fixings Installation Notes: a). Attach wiper to housing using M4 fixings, as supplied with camera housing. b). Before attaching water outlet tube ensure the pump is primed by following the steps below. 1. Fill bottle with clean water. 2. Attach short length of tube to outlet. 3. suck water through tube untill it reaches pump. 4. Connect the water outlet tube to the washer nozzle. 5. The unit is now ready for use. c). Washer nozzle is supplied as standard and is positioned on the wiper arm as shown above. NOTE: Camera housing type needs to be specified before purchasing as there are 3 sizes of wiper blade to fit the 3 housing types. H.D.S. Iss.01 Nov.01 3.Wiring diagram - Schéma de branchement - Esquema de conexiones - Schaltplan page 3 Fig.3 shows the internal wiring diagram for the wiper and all available options Wiring diagram - Schéma de branchement - Esquema de conexiones - Schaltplan 55 fleet Road, Fleet, Hants. England. Tel: +44 (0)1252 614884 Fax: +44 (0)1252 626013 Web Site Address: www.dennard-cctv.com The information contained in this document is for guidance only. Specification and availability of goods are subject to change without notice. Les informations figurant dans ce document ne sont donne qu' a titre guide d'orientation, les specifications et la disponibilite des equipements sont sujettes a modification. Die in diesern Handbuch enthaitenen informationen sind nur als Richtfinie zu betrachten. Die technische Beschreibung und Lieferbarkeit der Produkt e konnen ohne weiteres geandert werden. H.D.S. iss.01 Nov.01 ...