User manual DENON ADV-M71

DVD SURROUND SYSTEM D-M71DVS DVD SURROUND RECEIVER ADV-M71 OPERATING INSTRUCTIONS MODE D'EMPLOI OFF SLEEP SOURCE CLEAR ENTER A-B REPEAT VCR REC NTSC/PAL TITLE TV IN ON TIME TV EDIT/MENU ZOOM TV CH CHARAC. SLIDE MODE TV CH - + PROG/DIRECT MODE DVD REPEAT MEMO TUNER RANDOM BAND D.AUX CD SRS SEARCH MODE TUNING / TV VOL 1 MD/LINE-1 2 TAPE /LINE-2 3 6 AUTO DECODE 4 7 DIRECT 5 5CH STEREO + TUNER 8 STEREO 9 VIRTUAL + CH CALL 0/10 INPUT MODE +10 SURROUND FUNCTION B DVD SURROUND RECEIVER ADV-M71 SURROUND / SELECT PUSH - PARAM. TEST TONE A/V TUNER TV / VCR DVD IN/SURR. SYSTEM MD CDR TAPE IN/SURR. MENU / SET VIRTUAL SPEAKER + BAND 8 1 DVD 2 + MUTING TONE /SDB TONE / SDB 9 VOLUME 6 7 STATUS FUNCTION 3 ON / STANDBY PHONES SETUP ENTER SURROUND PARAMETER CH SELECT RETURN DISPLAY MENU VCR CH + TOP MENU ANGLE AUDIO SUB TITLE RC-936 FOR ENGLISH READERS PAGE 4 ~ PAGE 111 POUR LES LECTEURS FRANCAIS PAGE 112 ~ PAGE 219 2 We greatly appreciate your purchase of this unit. 2 To be sure you take maximum advantage of all the 2 Nous vous remercions pour l'achat de cet appareil. 2 Pour être sûr de profiter au maximum de toutes les features this unit has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise. "SERIAL NO. PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE" caractéristiques qu'offre cet appareil, lire avec soin ces instructions et bien utiliser l'appareil. Toujours conserver ce mode d'emploi pour s'y référer ultérieurement en cas de question ou de problème. "NO. DE SERIE PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL INSCRIT A L'ARRIERE DU COFFRET DE FAÇON A POUVOIR LE CONSULTER EN CAS DE PROBLEME." 2 SAFETY PRECAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. Do not open the top cover In order to prevent electric shock, do not open the top cover. 3. Do not place anything inside Do not place metal objects or spill liquid inside the DVD video player. Electric shock or malfunction may result. NOTE: This DVD video player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) ~ 35 °C (95 °F). CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Copyrights 2 It is prohibited by law to reproduce, broadcast, rent or play discs in public without the consent of the copyright holder. ATTENTION POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. 2 NOTE ON USE / OBSERVATIONS RELATIVES A L'UTILISATION · Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. · Eviter des températures élevées Tenir compte d'une dispersion de chaleur suffisante lors de l'installation sur une étagère. · Keep the set free from moisture, water, and dust. · Protéger l'appareil contre l'humidité, l'eau et lapoussière. · Do not let foreign objects in the set. · Ne pas laisser des objets étrangers dans l'appareil. · Unplug the power cord when not using the set for long periods of time. · Débrancher le cordon d'alimentation lorsque l'appareil n'est pas utilisé pendant de longues périodes. · Do not let insecticides, benzene, and thinner come in contact with the set. · Ne pas mettre en contact des insecticides, du benzène et un diluant avec l'appareil. · Handle the power cord carefully. Hold the plug when unplugging the cord. · Manipuler le cordon d'alimentation avec précaution. Tenir la prise lors du débranchement du cordon. * (For sets with ventilation holes) · Do not obstruct the ventilation holes. · Ne pas obstruer les trous d'aération. · Never disassemble or modify the set in any way. · Ne jamais démonter ou modifier l'appareil d'une manière ou d'une autre. 2 SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Attachments ­ Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture ­ Do not use this product near water ­ for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories ­ Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. Ventilation ­ Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power Sources ­ This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization ­ This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 13. 15. 16. 8. 17. 9. 18. 19. 10. 20. 21. 11. 12. 22. ANTENNA LEAD IN WIRE 23. GROUND CLAMP 24. ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) 25. ELECTRIC SERVICE EQUIPMENT Power-Cord Protection ­ Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Outdoor Antenna Grounding ­ If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A. Lightning ­ For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines ­ An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading ­ Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry ­ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing ­ Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service ­ Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance ­ this indicates a need for service. Replacement Parts ­ When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting ­ The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat ­ The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC - NATIONAL ELECTRICAL CODE 3 ENGLISH 2 INTRODUCTION Thank you for choosing the DENON ADV-M71 DVD Surround Receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF CONTENTS z x c v b n m , . /0 /1 /2 BEFORE USING ..........................................................................................4 CAUTIONS ON INSTALLATION ..............................................................4, 5 CAUTIONS ON HANDLING ........................................................................5 FEATURES ..............................................................................................5, 6 DISCS ..........................................................................................................6 CAUTIONS ON HANDLING DISCS.............................................................7 CONNECTIONS ....................................................................................8~15 PART NAMES AND FUNCTIONS .......................................................16~20 REMOTE CONTROL UNIT..................................................................21~28 SETTING UP THE SYSTEM ................................................................29~38 PLAY BACK .........................................................................................38~43 OPERATING THE SURROUND FUNCTIONS......................................43~45 /3 /4 /5 /6 /7 /8 /9 ¤0 ¤1 ¤2 ¤3 ¤4 DOLBY / DTS SURROUND.................................................................46~48 SURROUND PLAYBACK.....................................................................49~61 LISTENING TO THE RADIO................................................................62~64 ON-SCREEN DISPLAY ..............................................................................65 USING THE ON-SCREEN DISPLAY ....................................................66~83 USING THE TIMER .............................................................................84~90 CHANGING THE DEFAULT SETTINGS (DVD)...................................91~103 SYSTEM FUNCTION.......................................................................104~107 LAST FUNCTION MEMORY ...................................................................108 INITIALIZATION OF THE MICROPROCESSOR ......................................108 TROUBLESHOOTING .....................................................................109, 110 SPECIFICATIONS ....................................................................................111 2 ACCESSORIES ADV-M71 q Operating instructions .....1 t R6P/AA batteries .............2 Check that the following parts are included in addition to the main unit: w Warranty ( for North America model only )......................1 y AM loop antenna............1 u FM indoor antenna........1 e Service station list...................1 i Video cord ...............................1 r Remote control unit (RC-936)........................1 r t y u i 2 SC-U71 [D-M71DVS only] q Connecting cable (Approx. 3 m) .............................................................. 2 2 CAUTIONS ON INSTALLATION (1) DVD SURROUND RECEIVER UNIT Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV. If this happens, take the following steps: · Install this unit as far as possible from the tuner or TV. · Set the antenna wires from the tuner or TV away from this unit's power cord and input/output connection cords. · Noise or disturbance tends to occur particularly when using indoor antennas or 300 /ohms feeder wires. We recommend using outdoor antennas and 75 /ohms coaxial cables. For heat dispersal, leave at least 10 cm/4 inch of space between the top, back and sides of this unit and the wall or other components. (2) SPEAKER UNIT (D-M71DVS only) The tone character produced by speaker systems depends on such factors as the size and type of room, the method of installation, etc. Pay attention to the following points when installing the speaker systems. · If the bass sound is overemphasized when the speaker systems are installed directly on the floor, set them on concrete blocks or other hard stands. · Note that howling may be produced if the speaker systems are placed on the same stand or shelf as a record player. · If there are walls or glass doors behind or in front of the speaker systems, use heavy curtains, etc., to prevent resonance and reflection. 1 BEFORE USING Pay attention to the following before using this unit: · Moving the set To prevent short circuits or damaged wires in the connection cords, always unplug the power cord and disconnect the connection cords between all other audio components when moving the set. · Before turning the power switch on Check once again that all connections are proper and that there are not problems with the connection cords. Always set the power switch to the standby position before connecting and disconnecting connection cords. · Store this instructions in a safe place. After reading, store this instructions along with the warranty in a safe place. · Note that the illustrations in this instructions may differ from the actual set for explanation purposes. 4 ENGLISH · This is an anti-magnet type speaker system which can be used near television sets, etc., but with some TV sets the colors may become blotchy. If this happens, turn off the TV's power, wait 15 to 30 minutes, and turn the power back on. The TV's self demagnetizing circuit will improve the picture. If the colors are still blotchy, move the speaker systems further away from the TV. · Also note that if there is a magnet or any device generating magnetic force nearby, interaction between this device and the speaker systems can cause the colors on the TV to become blotchy. (2) SPEAKER UNIT [D-M71DVS only] · Avoid placing the speaker systems in places exposed to direct sunlight for long periods of time or near heaters or other heating equipment. · Placing in humid or dusty places may result in damage. · Exposing the cabinet to insecticides or wiping it with benzene, thinner or other solvents may result in damage or discoloration to the finish. Use a soft cloth or silicone cloth to wipe any dirt off the cabinet. Use cloths containing chemical substances with care. · Do not apply inputs exceeding the speaker system's max. input (the input which can be applied a short period of time with regular program sources). · The output terminals may differ depending on the amplifier being used. Consult the amplifier's instructions. · Clipping or other problems may occur in the output waveform when using the speaker systems with a high output and the amplifier's tone controls set to the maximum. Avoid using them under these conditions. · Never play such special signals as a tape recorder's fast-forwarding signals or sine waves continuously. · When moving the speaker systems, be careful not to apply excess force to the speaker nets. Doing so could damage the speaker units. WARNING · For your safety, do not put anything nor lean yourself on the loudspeakers. · Do not push the loudspeaker from aside to protect it from topping that may cause serious accident. · Fix speaker cables to prevent being caught on it and making loudspeakers topping down. 10 cm/4 inch or more B 4 FEATURES 10 cm/4 inch or more The ADV-M71 combines an AV amplifier and DVD player, the core components of a home theater system, into a single compact, stylish body. The system takes up little space, and the aluminum front panel and half mirror of the display make for an elegant design that blends in nicely with the décor in your room. Wall 3 CAUTIONS ON HANDLING (1) DVD SURROUND RECEIVER UNIT · Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. · Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER terminals The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals include a muting circuit. Because of this, the output signals are greatly reduced for several seconds after the power switch is turned on or input function, surround mode or any other-set-up is changed. If the volume is turned up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before adjusting the volume. · Whenever the power switch is in the STANDBY state, the apparatus is still connected on AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation. 1. 2-channel power amplifier with Dolby Virtual Speaker compatibility The ADV-M71 is equipped with two 35W (6 /ohms 1kHz, T.H.D. 10%) power amplifiers that make it compatible with new Dolby Virtual Speaker technology for recreating a 5.1-channel environment virtually using a 2-channel configuration. (Dolby Virtual Speaker is an proprietary technology of Dolby Laboratories.) A high performance digital signal processor enables playback of Dolby Digital and DTS multi-channel surround signals in the Dolby Virtual Speaker mode. Surround sound can be achieved with the Dolby Virtual Speaker mode for CDs and other 2-channel sources in combination with the Dolby Pro Logic II decoder. 2. 3.1-channel pre-out terminals allowing expansion into a 5.1channel surround system When used in combination with a commercially available subwoofer with built-in amplifier and power amplifier, the ADVM71 can be expanded into a 5.1-channel surround system. The ADV-M71 not only recreates an accurate sound field for multichannel sources, it is also compatible with wide mode playback in the Dolby Virtual Speaker mode. 3. Dolby Pro Logic II decoder for expanding sound field playback The ADV-M71 is equipped with a Dolby Pro Logic II decoder for expanding sound field playback for Dolby Surround and stereo music sources. 4. DENON's unique sound field simulation using the DSP The ADV-M71 is compatible with the Rock Arena, Jazz Club and Video Game modes with a 2-channel configuration. In a 5.1channel configuration, it is also compatible with the 5-Channel Stereo, Mono Movie and Matrix modes. 5 ENGLISH 5. High performance DVD drive for progressive image output compatibility The ADV-M71 is compatible with various functions offered by DVD sources, including multiple audio (up to 8 languages), multiple subtitle (up to 32 languages), multiple angle playback, viewing restriction, etc. 6. Quick setup and on-screen display compatibility DVDs can be enjoyed simply by selecting the TV and speaker configuration to be used. Even with a 5.1-channel speaker configuration, standard parameters can be set automatically simply by selecting the size of the room in which the system is being used and the listening position. The system can be set up using an on-screen display function. 7. Remote control unit with preset memory function The ADV-M71 comes with a remote control unit equipped with a preset memory function including the remote control operation codes for D-M31 series cassette decks and DENON remote control compatible components as well as the remote control operation codes of other major brands of TVs and video decks. 8. Convenient system functions When system connections are made with a D-M31 series cassette deck, such system functions as auto function selection, synchronized recording and timer recording/playback can be performed easily. 5 DISCS · The types of discs listed on the table below can be used on the ADV-M71. The marks are indicated on the disc labels or jackets. Usable discs DVD video DVD audio (NOTE 1) Recorded signals Digital audio + digital video (MPEG2) For example: Disc size Track 1 Track 2 Track 3 Track 4 Track 5 Mark (logo) 12 cm 8 cm 12 cm 8 cm Video CD Digital audio + digital video (MPEG1) CD CD-R CD-RW (NOTE 2) Recordable Digital audio MP3 WMA Digital picture (JPEG) 12 cm 8 cm ReWritable Picture CD Digital picture (JPEG) 12 cm FUJICOLOR CD Digital picture (JPEG) 12 cm 2 The following types of discs cannot be played on the ADVM71: · DVDs with region numbers other than "1" or "ALL" · DVD audio discs (NOTE 1) · DVD+R/+RW · DVD-ROM/RAMs · CVD · SVCD · CD-ROMs (Only MP3/WMA file can be played) · VSDs · CDVs (Only the audio part can be played.) · CD-Gs (Only the audio is output.) · Photo CDs (NEVER play such discs on the ADV-M71) If you attempt to play photo CDs, the data on the disc may be damaged. NOTE 1: Video part which based on DVD-video specification only can be played. NOTE 2: According to recording quality, some CD-R/RW cannot be played. · Playback control (video CDs) Video CDs including the words "playback control" on the disc or jacket are equipped with a function for displaying menus on the TV screen for selecting the desired position, displaying information, etc., in dialog fashion. In this manual, playing video CDs using such menus is referred to "menu playback". Video CDs with playback control can be used on the ADV-M71. 2 Disc terminology · Titles and chapters (DVD-videos) DVD-videos are divided into several large sections called "titles" and smaller sections called "chapters". Numbers are allotted to these sections. These numbers are called "title numbers" and "chapter numbers". For example: Title 1 Chapter 1 Chapter 2 Chapter 3 Title 2 Chapter 1 Chapter 2 · Tracks (video and music CDs) Video and music CDs are divided into sections called "tracks". Numbers are allotted to these sections. These numbers are called "track numbers". NOTE: · This DVD video player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD video player, this DVD video player cannot play this disc. The Region number for this DVD video player is 1. 1 6 ENGLISH 6 CAUTIONS ON HANDLING DISCS Discs Only the discs including the marks shown on page 6 can be played on the ADV-M71. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the ADV-M71. Do not attempt to play such discs, as they may damage the player. Cautions on Handling Discs · Do not get fingerprints, grease or dirt on discs. · Be especially careful not to scratch discs when removing them from their cases. · Do not bend discs. · Do not heat discs. · Do not enlarge the center hole. · Do not write on the labeled (printed) side with a ball-point pen or a pencil. · Water droplets may form on the surface if the disc is moved suddenly from a cold place to a warm one. Do not use a hairdryer, etc., to dry the disc. Holding Discs Avoid touching the surface of discs when loading and unloading them. Cautions on Storing Discs · Always eject discs after playing them. · Keep discs in their cases to protect them from dust, scratches and warping. · Do not put discs in the following places: 1. Places exposed to direct sunlight for long periods of time 2. Humid or dusty places 3. Places exposed to heat from heaters, etc. Be careful not to get fingerprints on the signal surface (the side which shines in rainbow colors). Cleaning Discs 2 Fingerprints or dirt on the disc may lower sound and picture quality or cause breaks in playback. Wipe off fingerprints or dirt. 2 Use a commercially available disc cleaning set or a soft cloth to wipe off fingerprints or dirt. Cautions on Loading Discs · Only load one disc at a time. Loading one disc on top of another may result in damage or scratch the discs. · Load 8 cm discs securely in the disc guide, without using an adapter. If the disc is not properly loaded, it may slip out of the guide and block the disc tray. · Be careful not to let your fingers get caught when the disc tray is closing. · Do not place anything but discs in the disc tray. · Do not load cracked or warped discs or discs that have been fixed with adhesive, etc. · Do not use discs on which the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled off. Such discs may get stuck inside the player, resulting in damage. Wipe gently from the middle outwards. Do not wipe with a circular motion. NOTE: · Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinner. Record spray Thinner Benzene 7 ENGLISH 7 CONNECTIONS · Do not plug in the AC cord until all connections have been completed. · Be sure to connect the left and right channels properly (left with left, right with right). · Insert the plugs securely. Incomplete connections will result in the generation of noise. · Note that binding pin plug cords together with AC cords or placing them near a power transformer will result in generating hum or other noise. · Noise or humming may be generated if a connected audio equipment is used independently without turning the power of this unit on. If this happens, turn on the power of the this unit. (1) Connecting the audio components (D-M31 series) · The ADV-M71 can be used connected in a system with the D-M31 series cassette deck (DRR-M31). · For instructions on operating the separately sold cassette deck (DRR-M31), refer to their respective operating instructions. · Only the DRR-M31 cassette deck can be connected directly to the ADV-M71 using system connections. NOTE: · This system includes digital circuitry which may cause interference such as color blotching or changes in the color on TVs. If this happens, move the system and the TV as far apart as possible. Connecting the speaker systems Connect the speaker system for the left channel (the left side as seen from the front) to the L terminals, the speaker system for the right channel to the R terminals. Refer to the instructions supplied with the speaker system for details. Be sure to use speaker systems with an impedance of 6 /ohms or greater. Stereo audio cord Speaker system SC-U71 [D-M71DVS only] Or commercially available speaker FM indoor antenna (included) AM loop antenna (included) The ADV-M71 includes a built-in clock function, so plug its power cord into a wall power outlet to which electricity is supplied constantly. AC CORD AC 120 V, 60 Hz Commercially available subwoofer with built-in amplifier ADV-M71 DVD surround receiver Speaker cords R L R L R L R L R L R L Audio cord Stereo audio cord Optical transmission cables System cords 8 ENGLISH CAUTION: · Only one cassette deck can be connected to the ADV-M71 using system connections. System operations cannot be performed properly if two cassette decks are connected using system connections. · Whenever the power operation switch is in the STANDBY position, the unit is still connected to AC line voltage. · Please be sure to unplug the power cord when you leave home for, e.g.,a vacation, etc. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. System operations Such system operations as the timer and the auto power on functions, as well as remote control operations cannot be performed unless all the RCA pin-plug cords and system connector cords are connected between the units, so be sure to make all the connections properly as shown in the diagram. Also, disconnecting system connectors while the system is operating may result in malfunctions. Be sure to unplug the power cord before changing connections. NOTES: · Do not plug the power cord into the power outlet until all connections are completed. Be sure to interconnect the channels (L to L (white) and R to R (red)) properly, as shown on the diagram. · Use the AC OUTLET for audio equipment only. Do not use them for hair driers, etc. · Insert the plugs securely. Incomplete connections may result in noise. · Be sure to connect the speaker cords between the speaker terminals and the speaker systems with the same polarities ( + to +, ­ to ­ ). If the polarities are switched, the sound at the center will be weak, the position of the different instruments will be unclear, and the stereo effect will be lost. · After unplugging the power cord, wait about 5 seconds before plugging it back in. · Note that setting the connection cords (pin-plug cords) next to the power cords may result in humming or other noise. MD recorder (sold separately) AC OUTLET AC 120V 60Hz UNSWITCHED 60W MAX B ADV-M71 VIRTUAL SPEAKER DRR-M31 (Horizontal installation) Cassette deck (DRR-M31) (sold separately) Install the sets as shown in one of these diagrams. In either case, be sure that the DVD surround receiver's ventilation holes are not obstructed. AC OUTLET AC 120V 60Hz UNSWITCHED 60W MAX B ADV-M71 VIRTUAL SPEAKER DRR-M31 (Vertical installation) 9 ENGLISH (2) Connecting the PRE OUT terminals (only with multi-channel settings) · When used in combination with a commercially available subwoofer with built-in amplifier and power amplifier, the ADV-M71 can be expanded into a 5.1-channel surround system. · When making connections, also refer to the operating instructions of the other components. · To make the 5.1-channel setting, set the speakers to "5.1 CH SURROUND" in the quick system setup and select "Room Setting" and "Listening Position". (See pages 31 to 32.) IN POWER AMPLIFIER (for center ch) IN IN SUBWOOFER · Connect the subwoofer with built-in amplifier. IN POWER AMPLIFIER (for Surround ch) · Connect the power amplifier for center and surround speaker system. Center Speaker Surround (L) Speaker Surround (R) Speaker (3) Connecting the Audio Signals of a Digital Satellite Tuner and VCR · Connect the video signals directly to the TV and switch the picture on the TV. · When making connections, also refer to the operating instructions of the other components. Digital satellite/cable tuner Connection to the optical digital input terminal · Only audio signals are input to the optical digital input terminal. · Use a commercially available optical transmission cable for connection to the optical transmission terminal (OPTICAL). B OPTICAL OUT AUDIO OUT R L Connection of a digital satellite/cable tuner · For tuners equipped with an optical digital output terminal, connect the digital output terminal to the DIGITAL D.AUX IN terminal on the ADV-M71 using an optical transmission cable. · To connect the audio output terminals, use whatever of the ADV-M71's LINE-1 or LINE-2 terminals are open. R L L R L Connection of a video deck · Connect the video deck's audio output and audio input terminals to whatever of the ADV-M71's LINE-1 or LINE-2 terminals are open using pin-plug cords. R L R R Video deck L R L R L OUT R IN AUDIO L 10 ENGLISH (4) Connecting a TV · When making connections, also refer to the operating instructions of the TV. S VIDEO TV S VEDEO OUT · Connect the TV's S video input (S-VIDEO INPUT) to the S-VIDEO OUT jack using a S jack connection cord. VIDEO OUT · Connect the TV's video input (VIDEO INPUT) to the VIDEO jack using a video connection cord. Monitor TV S-VIDEO IN VIDEO IN NOTES: · Connect this unit video outputs to the TV either directly. Do · not connect it via a VCR (video cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause disturbance · in the picture. Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP" to comply with your TV's video format. When the TV is NTSC formated set to NTSC. When "PROGRESSIVE" is set, no video signals are output from the VIDEO OUT or S-VIDEO OUT terminals. Set "INTERLACED" if you want to use the VIDEO OUT or S-VIDEO OUT signals. (Refer to page 39) 11 ENGLISH (5) Connecting the antenna terminals DIRECTION OF BROADCASTING STATION FM INDOOR ANTENNA (Supplied) FM ANTENNA 75 /ohms COAXIAL CABLE AM LOOP ANTENNA (Supplied) FM ANTENNA ADAPTER (Option) GROUND AM OUTDOOR ANTENNA · An F-type FM antenna cable plug can be connected directly. · If the FM antenna cable's plug is not of the F-type, connect using the F-type antenna adapter (Option). AM loop antenna assembly Connect to the AM antenna terminals. 1. Push the lever. Connection of AM antennas 2. Insert the conductor. 3. Return the lever. 1 2 3 4 Remove the vinyl tie and take out the connection line. Bend in the reverse direction. a. With the antenna on top any stable surface. Mount b. With the antenna attached to a wall. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTES: · Do not connect two FM antennas simultaneously. · Even if an external AM antenna is used, do not disconnect the AM loop antenna. · Make sure AM loop antenna lead terminals do not touch metal parts of the panel. Installation hole Mount on wall, etc. 12 ENGLISH (6) Connecting to a TV or Monitor Equipped with Component Input Connectors. · When making connections, also refer to the operating instructions of the other components. · The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. Color component output connectors (PR/CR, PB/CB and Y) The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors. · The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/RY, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV's operating instructions. Connect in this way if your TV is compatible with Progressive Scan. Monitor TV Y PB/CB PR/CR COMPONENT VIDEO IN Connecting a monitor TV COMPONENT VIDEO OUT jack · Connect the TV's color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT VIDEO OUT jack using 75 /ohms coaxial video pin-plug cords. NOTES: · Use the three commercially available video cords to connect the ADV-M71's color component output connectors to the TV or monitor. · Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP" to comply with your TV's video format. When the TV is NTSC formated set to NTSC. · About selecting the video output "INTERLACED" or "PROGRESSIVE", refer to page 39. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT. 13 ENGLISH (7) Sound output from this unit digital and analog audio output connectors 2 When a disc is played on the ADV-M71 (DIGITAL OUT) Settings Audio recording format Digital out : Normal Dolby Digital Digital out : PCM conversion 98 Digital out : Normal DTS Digital out : PCM conversion DVD video DVD audio (video part only) Linear PCM LPCM conversion mode : OFF 48 kHz LPCM conversion mode : ON 96 kHz CP : ON CP : OFF Video CD Music CD MP3/WMA CD MPEG 1 Linear PCM MP3/WMA LPCM conversion mode : ON LPCM conversion mode : OFF LPCM conversion mode : OFF 98 48 kHz/16 bit PCM 48 kHz/16 bit PCM 48 kHz/16 bit PCM (when copy-protected) 96 kHz PCM (when not copy-protected) 44.1 kHz/16 bit PCM 44.1 kHz/16 bit PCM 32 ~ 48 kHz/16 bit PCM 2 channels PCM data (48 kHz/16bit) 48 kHz/16 ~24 bit PCM DTS bitstream 2 channels PCM data (48 kHz/16bit) Refer to page Digital audio data output Dolby Digital bitstream · Linear PCM audio is the signal recording format used for music CDs. While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing higher sound quality than music CDs. 2 About the LINE-1 and LINE-2 analog recording outputs When the DVD or the D.AUX digital input is selected: · Dolby Digital, DTS, AAC and PCM digital signals are automatically converted to 2-channel stereo signals before being output (except when in the Dolby Headphone mode) and can be recorded in analog. (For what happens in the Dolby Headphone mode, see 3 below.) When TUNER, LINE-1 or LINE-2 is selected: · The selected analog audio signals from the tuner or from the device connected to the LINE-1 or LINE-2 analog input terminals (IN) are output unchanged, regardless of the ADV-M71's input mode or surround mode. (The same is true for the device connected to the D.AUX terminals when "LINE-2" under "/0 SETTING UP THE SYSTEM ­ (3) Detailed system setup ­ [5] Function settings" is set to "D.AUX".) Recording output during playback of a DVD, D.AUX or LINE-1 digital input source in the Dolby Headphone mode: · In the Dolby Headphone mode with a DVD or a digital input selected, the Dolby Headphone mode analog audio signals currently being played are output and can be recorded in analog. (See pages 57 and 58.) Cautions during analog recording of DVDs or digital input sources: · Do not switch the ADV-M71's input mode, surround mode or surround parameters during recording. Doing so will interrupt the sound being recorded. We recommend setting the surround mode to "STEREO" or "DIRECT". · When using headphones, recording is automatically performed in the Dolby Headphone mode. Do not disconnect the headphones or switch the headphones mode during recording. 14 ENGLISH (8) Speaker system connections Be sure to turn the amplifier's power off when connecting the speaker systems. · Use the included cables to connect the input terminals on the back of the speaker systems (see diagram) to the amplifier's speaker output terminals. Connect the speaker system for the left channel amplifier's "L" terminals, the one for the right channel to the amplifier's "R" terminals, matching the polarities ("" and "" marks). Inverting the polarities will result in unnatural sound, with the phase off or no low bass sound. Also check that all two terminal knobs are tightly fastened. Connecting the speaker cords Use the included connection cords to connect the input terminals on the backs of the speaker systems (see the diagram at the right) to the ADV-M71's speaker output terminals. · Connect the speaker system for the left channel to the "L" terminals, the speaker system for the right channel to the "R" terminals, and be sure the polarities ("+" and "­") are properly interconnected. · Note that if the polarities are inverted, the phase may be off and the bass sound may be missing, resulting in an unnatural sound. Also check that both the speaker terminal's screws are tightly screwed. Either twist the core wires firmly or terminate the wires. Connections (The red terminals on the right side are the "" terminals, the black ones on the left side the "" terminals.) Loosen the terminals knobs, insert the cables' core wires, then tighten the knobs. qTurn the speaker terminal counterclockwis e to loosen it. Connect to amplifier's "" side. (Copper color) wInsert the cord's core wires. eTurn clockwise to tighten the terminal. Connecting banana plugs Connect to amplifier's "" side. (Silver color) NOTE: Make sure the core wires do not touch each other. When using banana plugs, turn clockwise to tighten the terminal before inserting. Protector circuit · This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should this occur, please follow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or input cables, and wait for the unit to cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back on. If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Note on speaker impedance · The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance (for example speakers with an impedance of lower than 4 /ohms) are connected. If the protector circuit is activated, the speaker output is cut off. Turn off the set's power, wait for the set to cool down, improve the ventilation around the set, then turn the power back on. Cautions on connecting · With this unit's speaker outputs, signals with the reverse phase of the "+" side output terminal's signals are also output from the "-" side output terminal. Do not connect to a device for switching between multiple speakers (a speaker selector or audio channel selector) or connect in ways other than described in this manual. Doing so will result in damage. (8) Removing the speaker net (D-M71DVS only) · The net on the front of the speaker system is detachable. · To remove it, grasp it on both sides and pull it towards you. · To attach the net, line up the plastic pieces holes out of the net with the sticking in the cabinet and press in. 15 ENGLISH 8 PART NAMES AND FUNCTIONS Front Panel · For details on the functions of these parts, refer to the pages given in parentheses ( ). !4 B DVD SURROUND RECEIVER ADV-M71 !3 !2 !1 !0 o i SURROUND / SELECT PUSH - PARAM. MENU / SET VIRTUAL SPEAKER + BAND TONE / SDB VOLUME FUNCTION ON / STANDBY PHONES qw e r ty u i Stop/band button ( 2 BAND)..............................................(41, 62) o Play/pause button ( 1 / 3) .......................................................(40) !0 Open/close button ( 5 ) ..........................................................(40) !1 Skip backward and forward buttons ( 8 / ­ and + / 9 ) .....................................................(42, 62) q Power button (ON/STANDBY)..................................................(30) w Remote control sensor.............................................................(21) e Display r Headphones jack (PHONES) ....................................................(57) t Function selector (FUNCTION).................................................(43) y Tone/super dynamic bass button (TONE/SDB) ........................(45) u Volume control (VOLUME) .......................................................(41) !2 Surround/select knob (SURROUND/SELECT) ..........................(49) Surround parameter button (PARAMETER) .............................(50) !3 Menu/set button (MENU/SET) .................................................(64) !4 Disc holder ...............................................................................(39) 16 ENGLISH Remote control unit · For details on the functions of these parts, refer to the pages given in parentheses ( ). · Some of the buttons on the remote control unit have some functions. The functions are switched using the remote control mode selector switches. q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8 SLEEP SOURCE CLEAR ENTER A-B REPEAT OFF VCR REC NTSC/PAL TITLE TV IN CHARAC. SLIDE MODE TV CH PROG/DIRECT MODE DVD REPEAT MEMO TUNER ON TIME TV EDIT/MENU ZOOM TV CH @4 @5 @6 @7 @8 @9 #0 #1 - + RANDOM BAND D.AUX CD SRS SEARCH MODE TUNING / TV VOL 1 MD/LINE-1 2 TAPE /LINE-2 3 6 AUTO DECODE 4 7 DIRECT 5 5CH STEREO + TUNER 8 STEREO 9 VIRTUAL + CH CALL TEST TONE 0/10 INPUT MODE +10 SURROUND FUNCTION #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 $2 $3 $4 $5 A/V