Mobile DVD Player with two 7" TFT LCD Monitors OWNER'S MANUAL XDVD270 XDVD270 PREPARATION Table of Contents Page 2 3 4-5 6 7 8 9 10 11 12-14 15-17 18 19 20 21 22 DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections - Communication Cable/Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections - External Audio/Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick-Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Headrest Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software products. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. This player has been designed to play DVD software that has been encoded for specific region areas. It cannot play DVD software encoded for other region areas than the region areas for which it has been designed. The XDVD270 will play discs labeled "region 1" or "all". DVD region codes: 1 - USA, Canada 2 - Japan, Europe, South Africa, Middle East 3 - Asia 4 - Australia, New Zealand, Mexico, South America 5 - Russia, India 6 - China 2 XDVD270 PREPARATION Package Contents Please carefully unpack both units, and inspect all contents. The XDVD270 includes the following items: XDVD270 DVD Player with 7" Monitor XDVD270 7" Monitor with Media Storage Remote Control x 1 Coin Battery x 1 AC Adapter x 1 DC Adapter x 1 Audio Cable x 2 Video Cable x 2 Communication Cable x 1 Headphones x 2 Car Headrest Mount x 2 3 XDVD270 PREPARATION Safety Information CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1. Read All Instructions - All safety and operating instructions should be read before attempting to operate this product. 2. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 3. Cleaning - Disconnect power from this product before cleaning. Do not use liquid cleaners or aerosol cleaners. To prevent scratches, use only a damp cloth for cleaning LCD screen. 4. Water and Moisture - Do not use this product near water - for example, near a bath tub, sink, in a wet basement, or near a swimming pool. 5. Ventilation - Any slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. 6. Power Sources - This product should be operated only from the type of power source indicated on the marking label. 7. Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 8. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 9. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 10. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 4 XDVD270 PREPARATION Safety Precautions 1. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 2. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance - this may indicate a need for service. 3. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. This device employs a Laser System. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Make sure the device is stopped or powered down prior to opening player lid. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO DISASSEMBLE OR SERVICE THIS UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. This device complies with part 15 of the FCC rules and regulations. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. 5 XDVD270 OPERATION Control Locations - Main Unit 6 1 2 3 4 5 7 8 9 10 11 12 20 1 2 3 4 5 6 7 6 19 18 17 16 8 9 15 Chapter/Track Up Play 14 13 Left Speaker Chapter/Track Down Pause Display LCD On/Off Right Speaker IR Sensor 15 External Monitor Connection 16 12VDC Input 17 Video In/Out 18 Audio In/Out 19 Headphone Out 20 Volume 10 Stop 11 Power On/Off 12 Open 13 Key Lock On/Off 14 A/V Internal/External XDVD270 OPERATION Control Locations - External Monitor 1 2 3 9 8 7 6 5 4 1 2 3 4 5 Media Storage Tray Left Speaker Right Speaker Main Unit Connection A/V Internal/External 6 7 8 9 Video In Audio In Headphone Out Volume 7 XDVD270 OPERATION Control Locations - Remote 1 3 5 7 9 11 13 15 17 16 18 19 20 21 2 4 6 8 10 12 14 22 23 25 27 29 30 31 32 33 34 36 37 38 39 35 24 26 28 1 2 3 4 5 6 7 8 9 10 11 12 13 8 Power Display Title Zoom Search Slow Audio 4-Way - Up Menu Enter 4-Way - Left 4-Way - Down Cancel 14 15 16 17 18 19 20 21 22 23 24 25 26 Key #2 Key #1 Key #6 Key #5 Key #9 Key #0 Angle Subtitle Play Pause Stop Chapter/Track Down Chapter/Track Up 27 28 29 30 31 32 33 34 35 36 37 38 39 Fast Reverse Fast Forward Setup 4-Way - Right Return Key #3 Key #4 Key #7 Key #8 Program Key #+10 Repeat Repeat A-B XDVD270 OPERATION Connections - Data Cable /Power 1. Connecting the Main Unit to the External Monitor Note: Power off the XDVD270 main unit and any other A/V equipment before connecting the XDVD270 external monitor or making any external Audio or Video connections. Connect the gray end of the supplied communication cable to the right side of the main unit. The main unit connector is labeled EXTERNAL MONITOR. Plug the black end of the communication cable into the left side of the external monitor. The external monitor connector is labeled MAIN UNIT. Notes: The communication cable connectors include a locating tab allowing them to plug into the main unit and external monitor one way only. Use caution when inserting the connectors to prevent damage to the pins. Make sure the connectors are fully inserted, but do not force the connectors into the main unit or external monitor. 2. Power Connections Home Use Connect the supplied AC power adapter to the 12VDC power connector located on the right side of the main unit. Plug the other end into a standard 110VAC wall outlet. Car Use Connect the supplied DC power adapter to the 12VDC power connector located on the right side of the main unit. Plug the other end into a standard vehicle cigarette outlet. 3. Headphone Connections Connect the supplied headphones to the headphone outputs located on the right side of the main unit or the external monitor. Make sure the volume level is set to its minimum setting before connecting the headphones. 9 XDVD270 OPERATION Connections - External Audio/Video A/V Int/Ext (Internal/External Switch) The A/V INT EXT switch selects between internal and external audio/video sources. Select A/V INT on the main unit and A/V INT on the external monitor to watch a DVD playing in the main unit on both monitors. Connect the supplied audio cable to the AUDIO connector located on the right side of the main unit or the AUDIO IN connector on the right side of the external monitor. The audio cable is identified by having a 3.5 mm connector on one end and red/white RCA connectors on the other end. Connect the red/white RCA connectors to an audio input on your stereo receiver or TV. Consult your stereo receiver or TV owner's manual for further information. Select A/V INT on the left side of the main unit. Connect the red/white RCA connectors to an audio output from an external source such as a game console. Consult your game console owner's manual for further information. Select A/V EXT on the left side of the main unit or the external monitor. Connect the supplied video cable to the VIDEO connector located on the right side of the main unit or the VIDEO IN connector on the right side of the external monitor. The video cable is identified by having a 3.5 mm connector on one end and yellow/orange RCA connectors on the other end. Connect the yellow RCA connector to a video input on your TV. Consult your TV owner's manual for further information. Select A/V INT on the left side of the main unit. Connect the orange RCA connector to a video output from an external source such as a game console. Consult your game console owner's manual for further information. Select A/V EXT on the left side of the main unit or the external monitor. Note: The yellow RCA connector is not used when using the video cable with the external monitor. Audio Connections (Optional) Audio Out (Main Unit Only) Audio In Video Connections (Optional) Video Out (Main Unit Only) Video In 10 XDVD270 OPERATION Quick-Start Guide Inserting a Disc Slide the OPEN button to the right and gently lift the lid. The lid opens to a maximum 90 degrees. Do not open it any further - as severe damage to the unit may occur. Align the center of the disc with the center of the spindle guide. Press gently down on the center of the disc to snap it into place, then gently close the lid until a click is heard. Power On Playback Start Press the POWER button on the main unit for more than 2 seconds to turn the unit on. Press the PLAY button. In general, the DVD will start playing automatically when the power is turned on. The DVD player will immediately start rendering the DVD program. " " may appear on the display during operation. " " means that feature or operation is not permitted by the DVD player at this time. Playb ...