User manual DUAL XDVD8182

XDVD8182 INSTALLATION/OWNER'S MANUAL DVD Multimedia Receiver with 7" Touch Screen Display TOUCH Safety Note: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. XDVD8182 PREPARATION Table of Contents Page DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Control Locations - Monitor Close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-19 System Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3 AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 DVD Operation Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35 CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38 DVD/MP3/WMA Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40 iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD818 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed. The XDVD818 will play discs labeled "Region 1" or "All". DVD region codes: 1 - USA, Canada - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 - China XDVD8182 PREPARATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD818 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 1VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. To prevent damage or injury: 1. . 3. 4. 5. Make sure to ground the unit securely to the vehicle chassis ground. Do not remove the top or bottom covers of the unit. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing. Do not subject the unit to excessive shock. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction. 6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first. 7. Use only the provided hardware and wire harness. 8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake. 9. If you experience problems during installation, consult your nearest DUAL dealer. 10.If the unit malfunctions, reset the unit as described on page 11 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-38-5476. 11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing. 1.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while. Additional notes: 1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops. . Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. This device complies with part 15 of the FCC rules and regulations. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and ) This device must accept any interference received, including interference that may cause undesired operation. 3 XDVD8182 INSTALLATION Preparation Please read entire manual before installation. Before You Start · Disconnect negative battery terminal. Consult a qualified technician for instructions. · Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started · Remove the four #1 phillips head screws from each corner, and slide the unit out of the mounting sleeve. · Install mounting sleeve into opening, bending tabs to secure. · Connect wiring harness and antenna as shown on pages 5-6. Consult a qualified technician if you are unsure. · Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately). · Test for correct operation and slide unit into mounting sleeve, secure with #1 phillips screws as removed in step 1. · Snap trim ring into place. · Mount the iplugTM adapter to any smooth clean surface using the supplied double-sided tape or # x 3/8" Phillips head screws. Mounting sleeve opening dimensions 7-3/16" x -1/16" (183 mm x 53 mm) TYPICAL FRONT-LOAD DIN MOUNTING METHOD 4 XDVD8182 INSTALLATION Expanded Wiring Diagram - Inputs/Outputs OPTIONAL HEADREST MONITOR OPTIONAL TFT MONITOR 3.5m RIGHT m LEF T VIDE O iPod OPTIONAL BACKUP CAMERA YELLOW / BLUE BATTERY + YELLOW GROUND BLACK ACC POWER ANTENNA AMP REMOTE BLUE / WHITE RED REVERSE WHITE / BROWN Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Center output The CENTER audio output (GRAY RCA) is only active in Pro Logic audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with CAMERA input. NEED HELP?? Call our Technical Service Hotline, 1-866-38-5476 Safety Note: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or defeating this safety feature is a violation of law and is prohibited. 5 iPod EMERGENCY BRAKE SWITCH XDVD8182 INSTALLATION Wiring Diagram - Optional A/V Connections 6 XDVD8182 INSTALLATION IR Remote Preparation 7 XDVD8182 OPERATION Control Locations - Monitor Closed 1 2 3 4 5 6 16 15 14 13 12 11 10 9 8 7 1 2 3 4 5 6 7 8 Band Auto Store/Preset Scan Secondary LCD Display Open/Close Monitor Eject Rotary Encoder / Enter Mode 9 Chapter/Track Up 10 Chapter/Track Down 11 Stop 12 Play/Pause 13 Fast Forward 14 Fast Reverse 15 Mute 16 Power/Volume Monitor Notes: · · · This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls. Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN buttons on the front panel only. The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence. 8 XDVD8182 OPERATION Control Functions - Monitor Closed BAND AS/PS (Auto Store /Preset Scan) SECONDARY LCD DISP OPEN Press BAND to increment from FM1, FM, FM3, AM1] FM1. Press AS/PS for 1 sec to start station PRESET SCAN function, Press AS/PS for secs to start AUTO STORE station preset function in current BAND. Additional LCD for system information while monitor is closed. Press the DISP button to display CLOCK information on the secondary LCD screen when the monitor is closed. Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep upon opening, 3 beeps when closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Press once for DISC ejection. Press to access MAIN menu, rotate clockwise/counter clockwise to select desired item and press once to ENTER. Press once to incrementally select desired source. Selects the next chapter/track for playback. Selects the previous chapter/track for playback. Stop playback of DVD / CD / MP3 / iPod. Press once for PAUSE, press again for PLAY. Fast forward the disc content. Fast reverse the disc content. Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor. Press Volume knob for 1sec to turn the unit on, the unit will beep times. Press and hold POWER for more than secs, unit will beep 3 time, then turn off. NOTE: EJECT will still function even if POWER is off. Rotate clockwise/counter clockwise for desired VOLUME level, press once to access the AUDIO SETUP MENU. EJECT ROTARY MODE TRACK UP TRACK DOWN STOP PLAY/PAUSE FAST FORWARD FAST REVERSE MUTE POWER ON/OFF VOLUME 9 XDVD8182 OPERATION Control Locations - Monitor Open 1 2 3 4 5 1 Disc-in indicator - Red = Disc inserted, Blue = No disc . 2 ANGLE - Press to decrease the monitor view angle. 3 ANGLE - Press to increase the monitor view angle. 4 INFO - Press to select system INFO and press and hold for BRIGHTNESS. 5 Press to RESET system. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. 10 XDVD8182 OPERATION Control Functions - Monitor Open Disc-in indicator Blue = No disc Red = Disc inserted Monitor Angle Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. Notes: · Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. · The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. · The last position of the monitor will be saved in memory. The monitor will return to its last position automatically the next time it is opened. INFO/PIC Press INFO button for 1 sec to display DVD disc information. Press and hold INFO for secs to change TFT LCD BRIGHTNESS: Press ANGLE to increase, ANGLE to decrease or use VOLUME rotary to adjust the level up or down, (0 minimum / 0 maximum), 10 is default. SYSTEM RESET If you experience abnormal operation or, your unit is inoperable, press the RESET button for 3 seconds, located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. Notes: Use the tip of a pen to access the button. 11 XDVD8182 OPERATION Control Locations - Remote 1 5 9 13 17 21 25 29 33 37 6 10 14 18 22 26 30 34 38 2 3 4 7 11 15 19 23 27 31 35 39 8 12 16 20 24 28 32 36 40 1 2 3 4 5 6 7 8 9 Mode Mute Open/Close Power Key #1 Key # Key #3 Volume Up Key #4 16 Info 17 Search 18 Key #0 19 Band / Stop 20 Audio Select 21 Escape 22 4-Way - Up 23 Menu 24 Picture 25 4-Way - Left 26 Ok 27 4-Way - Right 28 Repeat A-B 29 Title Menu 30 4-Way - Down 31 Root 32 Repeat 33 Chapter/Track Down 34 Chapter/Track Up 35 Fast Rewind 36 Fast Forward 37 Zoom 38 Audio 39 Angle 40 Sub-Title 10 Key #5 11 Key #6 12 Volume Down 13 Key #7 14 Key #8 15 Key #9 * The remote control uses one 3 volt Lithium CR05 battery. For best performance, replace only with CR05 or equivalent. 1 XDVD8182 OPERATION Control Functions - Remote Mode Mute Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band / Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture Ok Repeat A-B Title Menu Root Repeat Chapter/Track Down Chapter/Track Up Fast Rewind Fast Forward Zoom Audio Angle Sub-Title Press once to incrementally select desired source Press once to MUTE audio, press again to return audio Press once to open monitor, press again to close the monitor Press once to turn the unit on, press again to turn unit off Direct access chapter/track/preset station for current BAND Increase VOLUME Decrease VOLUME Displays systems information Search function in the DVD / CD disc Press to increment BAND, or STOP while in DVD / MP3 mode. Enter AUDIO Setup mode Exit current menu Navigating system and DVD menus Enter the MAIN system menu BRIGHTNESS parameter setting for TFT Starts/pauses playback or confirm settings Repeat playback from time frame A to time frame B Enter the title menu on DVD Enters the main menu of the DVD disc Repeat playback of current DVD chapter Selects the previous chapter/track for playback Selects the next chapter/track for playback Fast rewind the disc content Fast forward the disc content Zooming in/out on an image from DVD disc Change the audio language for DVD disc playback Plays back DVD disc in different angle for a scene Language selection for subtitle 13 XDVD8182 OPERATION XDVD8182 OPERATION General Operation Power On/Off Press Volume knob for 1sec to turn the unit on, the unit will beep times. Press and hold POWER for more than secs, unit will beep 1 time, then turn off. NOTE: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep when opening, 3 beeps when closing. Be careful not to not touch the monitor during the open/close sequence. Notes: · The unit will stop automatically during open/close if an obstacle is detected. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence. · Audio can be heard while the monitor is closed. Monitor Angle Position Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. The monitor angle can be adjusted to 16 different positions. Notes: · Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. · The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. · The last position of the monitor can be saved in memory. The monitor will return to its last position automatically the next time it is opened. Notes: · The vehicle must be in park and the parking brake applied to view video on the in-dash monitor. · As a safety feature, a blue "PARKING" screen will show on the display when the vehicle's parking brake is not engaged. DVD, AV1 audio can be heard while the vehicle is in motion. · The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area. See page 18 for more details on how to initialize the PARKING BRAKE. Monitor Open/Close 14 XDVD8182 OPERATION General Operation Mode Press MODE to select between TUNER, DVD, AV1, CAMERA, and iPod inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD. Notes: An iPod must be connected to appear in the MODE selection string. Optional Mode Selection With the monitor open, press the screen to display the OSD menu bar and press TUNER, DVD, AV1 or CAMERA in the MAIN menu page to select the desired source. Adjust VOLUME using rotary encoder or the VOL buttons (00-40). Press MUTE to silence the audio; Press MUTE again to cancel. MUTE will appear in the OSD. Volume Mute Audio Adjustment from front panel Press in VOLUME rotary knob on left front panel, Press in VOLUME again to advance to desired parameter to be changed, Turn VOLUME rotary Q or P to adjust to desired level, Press in VOLUME to advance to next selection, Press and hold the VOLUME button on the front panel to exit. 6-Channel Audio ltem Master Volume Front Left Channel Volume Front Right Channel Volume Rear Left Channel Volume Rear Right Channel Volume Center Channel Volume Subwoofer Volume A djustable Range 00 to 40 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 Note: 6-Channel audio is only adjustable when Pro Logic audio is playing. Audio Adjustment from Remote Press the SEL button, Press the buttons on the remote to select an item to be adjusted, Press or to adjust the desired setting, Press the ESC button on the remote control to exit the audio control menu. Note: The Bass and Treble levels are only adjustable when EQ is set to "User" mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed on the screen. 15 XDVD8182 OPERATION General Operation INFO/PIC Press INFO button for 1 sec to display DVD disc information. Press and hold INFO for secs to change TFT LCD BRIGHTNESS: Press ANGLE to increase, ANGLE to decrease, or use VOLUME rotary to adjust the level up or down. (0 minimum / 0 maximum) 10 is default. SHARPNESS CONTRAST COLOR BRIGHTNESS TINT Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only possible while in either iPod, AUX-IN or CAMERA CVBS mode. While in iPod, AUX-IN or CAMERA mode: Press and hold INFO for secs to access PICTURE MENU, press briefly to step to next selection: PICTURE MENU [SHARPNESS [CONTRAST [COLOR [BRIGHTNESS [TINT 10 10 10 10 10 Monitor Angle Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. The monitor angle can be adjusted to 16 different positions or set to 6 preset positions within the touch screen OSD setup menu. Notes: · Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. · The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. · The last position of the monitor will be saved in memory. The monitor will return to its last position automatically the next time it is opened. SYSTEM RESET If you experience abnormal operation or, your unit is inoperable, press the RESET button for 3 seconds, located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. Notes: Use the tip of a pen to access the button. 16 XDVD8182 OPERATION General Operation BAND AS/PS (Auto Store /Preset Scan) Press BAND to increment from FM1, FM, FM3, AM1] FM1. Press AS/PS for 1 sec to start station PRESET SCAN function, the unit will now scan your program presets for 5 secs for each preset in that band, press again to stop scanning, the front LCD panel will flash while in this mode. Press AS/PS for secs to start AUTO STORE station preset function in current BAND. Press the DISP button to display CLOCK information on the secondary LCD screen when the monitor is closed. Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep upon opening, 3 beeps when closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Press once for DISC ejection. Press to access MAIN menu, rotate clockwise/counter clockwise to select desired item and press once to ENTER. Press once to incrementally select desired source. Selects the next chapter/track for playback. Selects the previous chapter/track for playback Stop playback of DVD / CD / MP3 / iPod Press once for PAUSE, press again for PLAY. Fast forward the disc content. Fast reverse the disc content. Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor. Press VOLUME knob for 1sec to turn the unit on, the unit will beep twice. Press and hold POWER for more than secs, unit will beep three time, then turn off. NOTE: EJECT will still function even if POWER is off. Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to access the AUDIO SETUP MENU. DISP OPEN EJECT ROTARY MODE TRACK UP TRACK DOWN STOP PLAY/PAUSE FAST FORWARD FAST REVERSE MUTE POWER ON/OFF VOLUME 17 XDVD8182 OPERATION General Operation - Parking Brake Initialization SAFETY WARNING · The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area. · Audio can be heard while the monitor is closed. · The vehicle must be in park and the parking brake applied to view video on the in-dash monitor. · As a safety feature, "ENGAGE PARKING BRAKE" blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is active. After connecting the yellow/blue PARKING BRAKE wire to brake switch circuit as described below, note however, DVD and AV1 audio can be heard while the vehicle is in motion without engaging the parking brake. Parking Brake Initialization Follow this two initialization procedure carefully to allow video playback: There are usually two situations that start the PARKING BRAKE Sequence. First situation is while driving: 1) Stop vehicle, put in Park, PARKING BRAKE off / non-active= "HIGH" ) Depress PARKING BRAKE for 1 sec = "Low" 3) Release PARKING BRAKE for 1 sec = "High" 4) Depress PARKING BRAKE hold permanently = "Low" Note: The transform time must be less than sec between "High--Low"/"Low High" to function properly Once the High--Low--High--Low--HOLD procedure is complete approx 3 sec--video will display. PARKING BRAKE HIGH / LOW state definition High = OFF/NON-ACTIVE state Low = ON / DEPRESS state Note: The transition time must be less than sec between "High--Low"/"Low--High". 18 Second situation is while already parked and the PARKING BRAKE is already engaged: 1) Keep vehicle in Park, PARKING BRAKE should be off = "Low" ) Release PARKING BRAKE for 1 sec = "High" 3) Depress PARKING BRAKE for 1 sec = "Low" 4) Release PARKING BRAKE for 1 sec = "High" 5) Depress PARKING BRAKE hold permanently = "Low" Once the "Low" first: Low--High--Low--High--Low--HOLD procedure is complete approx 5 sec--video will display. XDVD8182 OPERATION General Operation Secondary LCD Information 19 XDVD8182 OPERATION System Setup Menu 0 XDVD8182 OPERATION System Setup Menu 1 XDVD8182 OPERATION System Setup Menu XDVD8182 OPERATION System Setup Menu 3 XDVD8182 OPERATION AM/FM Tuner Operation 4 XDVD8182 OPERATION AM/ FM Tuner Operation 5 XDVD8182 OPERATION AM/FM Tuner Operation 6 XDVD8182 OPERATION DVD Operation 7 XDVD8182 OPERATION DVD Operation 8 XDVD8182 OPERATION DVD Operation 9 XDVD8182 OPERATION DVD Operation 30 XDVD8182 OPERATION DVD Operation 31 XDVD8182 OPERATION DVD Setup Menu 3 XDVD8182 OPERATION DVD Setup Menu 33 XDVD8182 OPERATION DVD Setup Menu 34 XDVD8182 OPERATION DVD Setup Menu 35 XDVD8182 OPERATION CD Operation 36 XDVD8182 OPERATION CD/MP3/WMA Operation 37 XDVD8182 OPERATION MP3/WMA Operation 38 XDVD8182 OPERATION DVD/MP3/WMA Information Media Compatibility The following types of discs/files are compatible: · CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW · CD-DA, DVD Video · MP3 data · WMA data The following types of discs/files are not compatible: · WMA files that are protected by DRM (Digital Rights Management) · WMA lossless format · Discs recorded with Track At Once or packet writing · MP3 PRO format · MP3 playlists · WAV format · WMV format · JPG format · DivX format · AVI format · MPG format Some recordable DVDs and CDs may be incompatible with this unit, depending on media type and recording method. Playback Order MP3/WMA playback sequence is based on recorded order of files and begins in the root folder of the disc. Any empty folders or folders that do not include MP3/WMA files are skipped. This unit may not play files in the order they were recorded in. Refer to your recording software's user's manual for more information. · ISO9660 level 1 · ISO9660 level · Yellow Book MODE 1 · Yellow Book MODE FORM 1 · Multi session · Maximum files - 1500 · Maximum folder levels - 8 · MPEG-1/ Audio Layer-3 ISO9660 standards: · Maximum nested folder depth is 8 (including the root folder). · Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and "_" (underscore). Some characters may not be displayed correctly, depending on the character type. · This device can play back discs in Joliet and other standards that conform to ISO9660. MP3/WMA written in the formats other than the above may not play and/or their file names or folder names may not be displayed properly. 39 Compatible Recording Formats XDVD8182 OPERATION DVD/MP3/WMA Information Additional MP3/WMA Information An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WMA files with the MP3/WMA extension. Sampling Frequency Rates MP3 WMA Transfer Bit rates MP3 WMA 3kHz ~ 48kHz 3kHz ~ 48kHz 40kbps ~ 30kbps constant Variable bit rates 40kbps ~ 19kbps constant Variable bit rates Note: Some files may not play or be displayed correctly, depending on sampling rates and bit rates. Recommended Settings For best results, use the following settings when burning an MP3 disc: 18kbps or higher constant bit rate 44.1kHz or higher sampling frequency For best results, use the following settings when burning a WMA disc: 64kbps or higher constant bit rate 44kHz or higher sampling frequency 40 XDVD8182 OPERATION iPod Operation * * Playback information Volume indicator / Photo note: * iPod VideoPhoto transport controls are not possible from unit touch screen, only from iPod keypad. 1) Video / 2) To playback Video / Photo from iPod to the unit, the iPod TV OUT output must be ON. (Refer to your iPod owners manual for details on TV OUT) 3) Press on unit screen to release the iPod from audio control mode, DISCONNECTING... 4) Next select Video or Photo to be viewed from iPod, Video / Photo should now appear on unit. 5) Once finished viewing Video / Photo, press MENU on iPod. 6) Press on unit screen to reconnect to iPod audio control mode, audio control screen should reappear, CONNECTING..... 41 XDVD8182 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. What to do? 1. Before you call for service, check the troubleshooting guide in your owner's manual. A slight adjustment of any custom controls may save you a service call. . If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: · Call us toll-free at 1-866-38-5476 · E-mail us at cs@dualav.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages. 4 XDVD8182 OPERATION Troubleshooting Problem Unit will not turn on (no power) Cause Black wire not connected Fuse blown Action Check connection to ground Replace fuse Check connections at speakers Insulate all bare speaker wires from each other and chassis ground Check for pinched wire Check for pinched wire Use fuse with correct rating Check connections at parking brake Apply parking brake Check connections at reverse lamp Select reverse gear Set rear view to ON - see page 14 for details Check media for scratches Use discs labeled "Region 1" or "All" only. Replace battery Check mounting sleeve Check media for scratches Press eject or RESET Use only DVDs labeled "Region 1" or "All" only. Remove the obstacle and press OPEN again to resume the monitor open/close sequence. Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Red wire not connected or incorrect voltage Unit has power (but no sound) Unit blows fuse Speaker wires not connected One or more speaker wires touching each other or touching chassis ground Yellow or red wire touching chassis ground Speaker wires touching chassis ground Incorrect fuse rating Unit has audio (but no video) No video display (when in reverse) Parking brake safety circuit not connected Parking brake not applied Reverse circuit not connected Vehicle is not in reverse Rear view set to OFF DVD does not start playback Physical defect in media Wrong region IR remote does not work Excessive skipping ERR-DISC appears on display Region code error appears on display Front panel will not open/close Dead battery Unit is not mounted correctly Physical defect in media Focus error or disc is in upside down Region code error Front panel obstructed Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries. 43 XDVD8182 OPERATION Specifications DVD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1720kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Panel size: 7" (177.8 mm) diagonal measurement View angle (up/down/left/right): 30/60/60/60 Resolution: 480 W x 234 H Brightness (cd/m): 350 Contrast ratio: 300:1 Elements: 336,960 Operating voltage: 11-16 VDC, negative ground Speaker output impedance: 4~8 ohms Line output voltage: 2 Volts Line output impedance: 200 ohms Chassis dimensions: 7" x 7" x 2" (178 x 178 x 51 mm) Design and specifications subject to change without notice. FM Tuner AM Tuner Monitor General CEA-006 Power Standard Specifications (reference: 14.4VDC +/- 0.V, 0Hz~0kHz) Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) Dual Electronics Corp. Toll Free: 1-866-38-5476 www.dualav.com ©006 Dual Electronics Corp. All rights reserved. NSA0606-V0