User manual DUAL XDVD8183

XDVD8183 INSTALLATION/OWNER'S MANUAL DVD Multimedia Receiver with 7" Touch Screen Display TOUCH Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Collex is under license. All other trademarks are property of their respective owners. XDVD8183 PREPARATION Table of Contents DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Region Management Page 3 4 5-7 8 9-10 11-1 13-14 15-0 1- 3 4 5-8 9-3 33 34-4 43-49 50-54 55-58 59-60 61-66 67-70 71 7-73 74 Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed. The XDVD8183 will play discs labeled "Region 1" or "All". DVD region codes: 1 - USA, Canada - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 - China XDVD8183 PREPARATION WARNING Upon installation of this Monitor/DVD player ("unit") into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver's seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver's seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. This unit is designed so that it may be operated only when the vehicle is in "Park" and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in "Park" and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire ("Yellow-Blue Lead") to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage. Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage. When operating this unit, keep the unit's volume level low enough so that the vehicle's occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. 3 XDVD8183 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD8183 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 1VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. To prevent damage or injury: 1. . 3. 4. 5. Make sure to ground the unit securely to the vehicle chassis ground. Do not remove the top or bottom covers of the unit. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing. Do not subject the unit to excessive shock. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction. 6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first. 7. Use only the provided hardware and wire harness. 8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake. 9. If you experience problems during installation, consult your nearest DUAL dealer. 10.If the unit malfunctions, reset the unit as described on page 1 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-38-5476. 11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing. 1.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while. Additional Notes: 1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops. . Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. This device complies with part 15 of the FCC rules and regulations. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and ) This device must accept any interference received, including interference that may cause undesired operation. 4 XDVD8183 INSTALLATION Preparation Please read entire manual before installation. Before You Start · Disconnect negative battery terminal. Consult a qualified technician for instructions. · Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started · Slide the unit out of the mounting sleeve. · Install mounting sleeve into opening, bending tabs to secure. · Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure. · Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately). · Test for correct operation and slide unit into mounting sleeve. · Attach unit to mounting sleeve using supplied #1 Phillips screws. · Snap trim ring into place. · Mount the iplugTM adapter to any smooth clean surface using the supplied double-sided tape or Phillips head screws. Mounting sleeve opening dimensions 7-3/16" x -1/16" (183 mm x 53 mm) TYPICAL FRONT-LOAD DIN MOUNTING METHOD 5 XDVD8183 INSTALLATION Expanded Wiring Diagram - Inputs/Outputs iPod not included Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Center output The CENTER audio output (Gray RCA) is only active in DVD 5.1 audio mode and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input. NEED HELP?? Call our Technical Service Hotline, 1-866-38-5476. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or defeating this safety feature is a violation of law and is prohibited. 6 XDVD8183 INSTALLATION Wiring Diagram - Optional A/V Connections 7 XDVD8183 OPERATION IR Remote Preparation To first use the IR Remote control, you must first pull the battery insulation tape out Notes: · Remove the battery if the remote will not be used for a month or longer · Remove and dispose of battery properly Insert or replacing the Battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder · CAUTION!!! Do not store battery with metallic objects or materials 8 XDVD8183 OPERATION Control Locations - Monitor Closed 1 2 3 4 5 6 17 16 Band 15 14 13 12 11 10 9 8 7 1 2 3 4 5 6 7 8 9 Monitor Notes: · · · Auto Store/Preset Scan Secondary LCD Display Open/Close Monitor Eject Rotary Encoder/Enter Mode Chapter/Track Up/Seek Up 10 Chapter/Track Down/Seek Down 11 Stop 12 Play/Pause 13 Fast Forward/Manual Tune Up 14 Fast Reverse/Manual Tune Down 15 Mute 16 Power/Volume 17 Microphone This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls. Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN buttons on the front panel only. The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence. 9 XDVD8183 OPERATION Control Functions - Monitor Closed BAND AS/PS (Auto Store /Preset Scan) SECONDARY LCD DISP OPEN Press BAND to increment from FM1, FM, FM3, AM ] FM1. Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for seconds to start AUTO STORE station preset function in current BAND. Additional LCD for system information while monitor is closed. Press the DISP button to display various information on the secondary LCD. Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Press once to eject disc. Rotate clockwise/counter-clockwise to select desired item and press once to ENTER. Press once to incrementally select desired source. Selects the next chapter/track/radio station. Selects the previous chapter/track/radio station. Stop playback of DVD/CD/MP3/iPod. Press once for PAUSE, press again for PLAY. Fast forwards the chapter/track or selects the next radio frequency. Fast reverses the chapter/track or selects the previous frequency. Press once to MUTE audio, MUTE will appear in the secondary LCD. Press again to return audio. Press POWER momentarily to turn the unit on. Press and hold POWER for more than seconds to turn the unit off. Note: EJECT will still function even if POWER is off. Rotate clockwise/counter clockwise for desired VOLUME level. EJECT ROTARY MODE TRACK/SEEK UP TRACK/SEEK DOWN STOP PLAY/PAUSE FAST FORWARD/TUNE UP FAST REVERSE/TUNE DOWN MUTE POWER ON/OFF VOLUME 10 XDVD8183 OPERATION Control Locations - Monitor Open 1 2 3 4 5 1 Disc-in indicator - Red = Disc inserted, Blue = No disc. 2 ANGLE - Press to decrease the monitor view angle. 3 ANGLE - Press to increase the monitor view angle. 4 INFO - Press to select DVD INFO and press and hold for BRIGHTNESS. 5 Press to RESET system. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. 11 XDVD8183 OPERATION Control Functions - Monitor Open Disc-in indicator Blue = No disc Red = Disc inserted Monitor Angle Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. Notes: · Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. · The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. · The last position of the monitor will be saved in memory. The monitor will return to its last position automatically the next time it is opened. INFO/PIC Press INFO button for 1 second to display DVD disc information. Press and hold INFO for seconds to change TFT LCD BRIGHTNESS: Press ANGLE to increase, ANGLE to decrease or use VOLUME rotary to adjust the level up or down, (0 minimum/0 maximum), 10 is default. SYSTEM RESET If you experience abnormal operation or, your unit is inoperable, press the RESET button for 3 seconds, located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. Note: Use the tip of a pen to access the button. 1 XDVD8183 OPERATION Control Locations - Remote 1 2 3 4 5 9 13 17 21 25 29 33 37 6 10 14 18 22 26 30 34 38 7 11 15 19 23 27 31 35 39 8 12 16 20 24 28 32 36 40 1 2 3 4 5 6 7 8 9 Mode Mute Open/Close Power Key #1 Key # Key #3 Volume Up Key #4 16 Info 17 Search 18 Key #0 19 Band/Stop 20 Audio Select 21 Escape 22 4-Way - Up 23 Menu 24 Picture 25 4-Way - Left 26 OK 27 4-Way - Right 28 Repeat A-B 29 Title Menu/CD Scan 30 4-Way - Down 31 Root 32 Repeat 33 Chapter/Track/Seek Down 34 Chapter/Track/Seek Down 35 Fast Reverse/Manual Tune Down 36 Fast Forward/Manual Tune Up 37 Zoom 38 Audio 39 Angle/iPod Music mode 40 Sub-Title/iPod Video mode 10 Key #5 11 Key #6 12 Volume Down 13 Key #7 14 Key #8 15 Key #9 * The remote control uses one 3 volt Lithium CR05 battery. For best performance, replace only with CR05 or equivalent. 13 XDVD8183 OPERATION Control Functions - Remote Mode Mute Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band / Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture OK Repeat A-B Title Menu Root Repeat Chapter/Track Down Chapter/Track Up Fast Rewind Fast Forward Zoom Audio Angle Sub-Title Press once to incrementally select desired source. Press once to MUTE audio, press again to return audio. Press once to open monitor, press again to close the monitor. Press once to turn the unit on, press again to turn unit off. Direct access chapter/track/preset station for current BAND. Increase VOLUME. Decrease VOLUME. Displays DVD information. Search function in the DVD/CD disc mode. Press to increment BAND, or STOP while in DVD/MP3 mode. Enter AUDIO Setup mode. Exit current menu. Navigating system and DVD menus. Enter the MAIN system menu. BRIGHTNESS parameter setting for TFT. Starts/pauses playback or confirm settings. Repeat playback from time frame A to time frame B. Enters the title menu on DVD. Enters the main menu of the DVD disc. Repeats playback of current DVD chapter. Selects the previous chapter/track for playback. Selects the next chapter/track for playback. Fast rewinds the disc content. Fast forwards the disc content. Zooming in/out on an image from DVD disc. Change the audio language for DVD disc playback. Plays DVD disc in different angle for a scene/Selects iPod Music mode. Language selection for subtitle/Selects iPod Video mode. 14 XDVD8183 OPERATION General Operation Power On/Off Press POWER momentarily to turn the unit on. Press and hold POWER for more than seconds to turn the unit off. Note: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch the monitor during the open/close sequence. Notes: · The unit will stop automatically during open/close if an obstacle is detected. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence. · Audio can be heard while the monitor is closed. Monitor Angle Position Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. Notes: · Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. · The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. · The last position of the monitor can be saved in memory. The monitor will return to its last position automatically the next time it is opened. Notes: · The vehicle must be in park and the parking brake applied to view video on the in-dash monitor. · As a safety feature, a blue "CAUTION" screen will show on the display when the vehicle's parking brake is not engaged. DVD and AUX IN audio can be heard while the vehicle is in motion. · The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area. See DVD operation on page 33 for more details on how to initialize the PARKING BRAKE. Monitor Open/Close 15 XDVD8183 OPERATION General Operation Mode Press MODE to select between TUNER, DVD, AUX IN, CAMERA and iPod inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD. iPod (optional) must be connected to appear in the MODE selection string. Optional Mode Selection With the monitor open, press the screen to display the OSD menu bar and press TUNER, DVD, AUX IN or CAMERA in the MAIN menu page to select the desired source. Adjust VOLUME using rotary encoder or the VOL buttons (00-40). Press MUTE to silence the audio; Press MUTE again to cancel. will appear in the OSD. Volume Mute Audio Adjustment from front panel Press in VOLUME rotary knob on left front panel, Press in VOLUME again to advance to desired parameter to be changed, Turn VOLUME rotary Q or P to adjust to desired level, Press in VOLUME to advance to next selection, Press and hold the VOLUME button on the front panel to exit. -Channel Audio Settings 6-Channel Audio Settings ltem Master Volume Front Left Channel Volume Front Right Channel Volume Rear Left Channel Volume Rear Right Channel Volume Center Channel Volume A djustable Range 00 to 40 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 00 00 00 R 00 L 00 F R Subwoofer Volume Audio Adjustment from Remote Press the SEL button, Press the buttons on the remote to select an item to be adjusted, Press or to adjust the desired setting, Press the ESC button on the remote control to exit the audio control menu. Notes: The Bass and Treble levels are only adjustable when EQ is set to"User" mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed on the screen. 16 L Note: 6-Channel audio is only adjustable when "Full 6CH" mode is selected. Refer to page 47 for more details. XDVD8183 OPERATION General Operation INFO/PIC RGB BRIGHTNESS Press INFO button for 1 second to display DVD disc information. Press and hold INFO for seconds to change TFT LCD BRIGHTNESS: Press ANGLE to increase, ANGLE to decrease, or use VOLUME rotary to adjust the level up or down. (0 minimum/0 maximum) 10 is default. While in iPod Video playback, AUX-IN or CAMERA mode: Press and hold INFO for seconds to access PICTURE MENU, press INFO briefly again to step to next selection: CVBS Screen Controls SHARPNESS CONTRAST COLOR BRIGHTNESS TINT PICTURE MENU SHARPNESS COLOR CONTRAST BRIGHTNESS TINT 10 10 10 10 10 Note: Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only possible while in either iPod video playback, AUX-IN or CAMERA CVBS mode. L Press adjust the sharpness (0 minimum/+0 maximum). or to Press to adjust the contrast (0 minimum/+0 maximum). or Press to adjust the color (0 minimum/+0 maximum). or Press to adjust the brightness (0 minimum/+0 maximum). or Press to adjust the tint (0 minimum/+0 maximum). or 17 XDVD8183 OPERATION General Operation BAND AS/PS (Auto Store /Preset Scan) Press BAND to increment from FM1, FM, FM3, AM ] FM1. Press AS/PS momentarily to start station PRESET SCAN function. The unit will now scan your program presets for 10 seconds for each preset in that band. Press AS/PS again to stop scanning. Press AS/PS for seconds to start AUTO STORE station preset function in current BAND. Press the DISP button to display various information on the secondary LCD screen when the monitor is closed. Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Press once for DISC ejection. Press to access MAIN menu, rotate clockwise/counter-clockwise to select desired item and press once to ENTER. Press once to incrementally select desired source. Selects the next chapter/track/radio station. Selects the previous chapter/track/radio station. Stop playback of DVD/CD/MP3/iPod. Press once for PAUSE, press again for PLAY. Fast forwards the chapter/track or selects the next radio frequency. Fast reverses the chapter/track or selects the previous frequency. Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor. Press POWER momentarily to turn the unit on. Press and hold POWER for more than seconds to turn the unit off. Note: EJECT will still function even if POWER is off. Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to access the AUDIO SETUP MENU. Turn VOLUME rotary to desired listening level, press and hold VOLUME rotary knob for 3 seconds to program currently selected volume level. 18 DISP OPEN EJECT ROTARY MODE TRACK/SEEK UP TRACK/SEEK DOWN STOP PLAY/PAUSE FAST FORWARD/TUNE UP FAST REVERSE/TUNE DOWN MUTE POWER ON/OFF VOLUME PROGRAMMABLE TURN-ON VOLUME XDVD8183 OPERATION General Operation Secondary LCD Information 1 2 3 4 NOTE: Secondary LCD only functions when TFT monitor is closed. 1) LOC 2) ST 3) TIME 4) LOUD LOCAL indicator, icon will be off when DISTANCE (DX) is selected STEREO radio station indicator Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc LOUDNESS selection indicator 19 XDVD8183 OPERATION General Operation Main Menu Access There are three methods to access the MAIN menu: · Press the ENTER button on the right ROTARY knob. · Press the MENU button on the remote control. · Touch the upper left corner of the touch screen. 1 3 4 1 11 10 9 L 8 7 6 5 Touch Access Buttons 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Rapid Dial Rotary Encoder Touch to access AM/FM TUNER mode. Touch to access CD/DVD mode, CD/DVD must be inserted. Touch to access iPod mode, iPod must be connected to activate. Touch to RETURN to previous screen. Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first.) Refer to page 67 for more details. Touch to access CAMERA mode, if optional camera isn't connected then "No Signal Detected" will be displayed. Touch to STANDBY screen, touch screen again or any button to resume display. Note: VOLUME level can be controlled in STANDBY mode. Touch to access AUXILIARY A/V INPUT mode . Touch to access SCREEN SETUP menu. Touch to access GENERAL SETUP menu. Touch to access CD/DVD SETUP menu, CD/DVD must be inserted to function Touch to access MAIN Source menu. The rotary encoder can also control touch screen functions from the main menu. · Select desired function rotating clockwise or counter-clockwise. · Function will be outlined in yellow. · Press to confirm/ENTER. 0 XDVD8183 OPERATION GENERAL Setup - Menu General Setup Menu · · · Note: Default anti-theft password is 0000 Settings Default Press the GENERAL button to access the GENERAL setup mode. Select desired parameter you wish to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button. L GENERAL Setup Menu matrix Options USA S-Amer1 S-Amer Europe 00:00 1Hr 4Hr Normal Reverse Auto Function Radio USA Set to appropriate setting for your country Clock adjust Clock Mode Camera Image AM 1Hr Normal See adjusting the clock on page 3 for more details PM 6:00 18:00 Normal Image Mirror camera input image 180 degrees System will auto detect NTSC or PAL For NTSC compatibility For PAL compatibility TFT panel will automatically open when IGN is turned on TFT panel will not auto open when IGN is turned on TFT will only open/close when OPEN button is pressed Turns off the Bluetooth functionality Enables Bluetooth functionality Must enter password to turn anti-theft on or off System will require a password if main battery power is removed for more than 40 seconds No password will be required if power is removed Load all factory parameters to their original settlings, Notes: This will not reset the anti-theft password. Default anti-theft password is 0000. Video Format Auto NTSC PAL On TFT Auto Open Bluetooth Anti-theft Code Anti-theft active Off Off 0000 Off Off Manual Off On ---On Off Load Factory defaults Yes Are you sure? Yes/Cancel Note: Not all GENERAL setup features are described in detail. 1 XDVD8183 OPERATION GENERAL Setup - Adjusting Radio Frequency Adjusting Radio Frequency L 1 1) Touch top left corner of screen. Step 1 Step 2 ) Touch GENERAL icon. L L 3 Step 3 3) Touch USA. L L 5 4 Step 4 4) Touch the setting for your region. Step 5 Touch RETURN to exit. XDVD8183 OPERATION GENERAL Setup - Adjusting the Clock 12Hr Clock Mode L 1 1) Touch top left corner of screen. Step 1 Step 2 ) Touch GENERAL icon. L Step 3 L 3 3) Touch 00:00 area in the CLOCK row. L 6 Steps 4-7 24Hr Clock Mode LLL 7 4 5 4) Keypad will appear, enter HOUR, touch OK. 5) Enter MINUTES, touch OK. 6) Touch AM or PM to set. 7) Touch RETURN to exit. For 4Hr format, select 4Hr from CLOCK MODE, then follow steps 1-7. 3 XDVD8183 OPERATION GENERAL Setup - Setting the Anti-theft code By default Anti-theft password is 0000 and is turned Off. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery POWER is disconnected for more than 40 seconds. Step 1 & 2 L 1 1) Touch top left corner of screen. ) Touch GENERAL icon. L 3 Step 3 & 4 3) Touch down arrow icon. L L 4 4) Touch ----. Step 5 & 6 5) Enter 0000, then press OK. L 5 7 L 6 6) Touch Off. Note: it is recommended that you choose your own 4-digit password Step 7 & 8 carefully, write it down somewhere and keep in a safe location. In the event you ever loose or forget your password, call our tech hot line for support on how to unlock your system. Step 9 & 10 7) Touch On. L L L 9 L 8 8) Touch ---- again. 9) Enter your new 4-digit password, then press OK. 10 10) Touch RETURN to exit. 4 XDVD8183 OPERATION SCREEN Setup - Menu Screen Setup Menu · · · Press the SCREEN icon to access the SCREEN setup mode. Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN button. L SCREEN Setup Menu matrix Settings Brightness Screen Tilt Screen Saver TS Calibrate Version Default 10 4 On No Options 0 - 0 1-6 Off On No Yes Function Press or on the remote or press the right rotary once and rotate clockwise/counter-clockwise to adjust the Brightness to the desired setting Select 1 to 6 to adjust the default tilt angle of the screen Select On to activate the screen saver, Off to deactivate Touch Yes to enter the Touch Screen calibration mode Software version of unit System Standby To conserve the LCD backlight lifespan or to eliminate glare while night driving, press STANDBY. The TFT screen will black out, however all other operations continue to operate. Press any button except VOLUME or touch the screen again to return to normal viewing. 5 L XDVD8183 OPERATION SCREEN Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button on the front TFT panel. Step 1 L 1 1) Touch top left corner of screen. Step 2 ) Touch SCREEN icon. L L 3 Step 3 3) Touch [-] to reduce brightness. L L 5 4 Step 4 4) Touch [+] to increase brightness. 0 - 0 is possible Default = 10 Step 5 5) Touch RETURN to exit. 6 XDVD8183 OPERATION SCREEN Setup - Setting TFT Angle Set for best viewing angle for your vehicle L 1 1) Touch top left corner of screen. Step 1 Step 2 ) Touch SCREEN icon. L L 3 Step 3 3) Touch a number displayed in SCREEN TILT row. Step 4 L L 5 4 4) Touch desired angle for best viewing angle. 1 - 6 is possible Default = 4 5) Touch RETURN to exit. Step 5 7 XDVD8183 OPERATION SCREEN Setup - Touch Screen Calibration Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described. L 1 1) Touch top left corner of screen. Step 1 Step 2 ) Touch SCREEN icon. L Step 3 & 4 3) Touch No in TS Calibration row. 4) Then touch Yes. LL 3 4 Note: For proper calibration you must touch each pointer for 2 seconds. If pointers are not touched properly, the calibration sequence will start over until the calibration is done correctly. L 5 Step 5 & 6 5) Touch and hold the pointers as indicated on the screen for seconds each. 6) Screen will automatically return to MAIN MENU, touch EXIT to return. 8 XDVD8183 OPERATION AM/FM Tuner Operation - OSD Overview 1 2 3 4 5 19 18 6 7 17 16 15 14 Tuner Mode 13 12 11 10 9 8 From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. Current Source Indicator Displays source currently playing. Preset Number Indicator Shows what preset has been selected. Stereo Indicator Shows that the frequency selected is received in stereo. Preset Number List Display Shows the preset list by preset number. Preset Station List Display Shows the preset station list by frequency. Touch frequency to select a preset. Touch and hold frequency to store presets. Local / DX Tuning Mode Shows when local or distance tuning is on. Preset Display Scroll Bar Allows scrolling of preset list. Tuner Scan Touching this icon will scan through all available stations in the current band. 1 2 3 4 5 6 7 8 9 XDVD8183 OPERATION AM/ FM Tuner Operation - OSD Overview 9 Tune Frequency - Up Touching this icon will tune the radio to a higher frequency by one frequency step. Touch and hold to continuously tune up. Tune Frequency - Down Touching this icon will tune the radio to a lower frequency by one frequency step. Touch and hold to continuously tune down. Seek Next Station - Up Touching this icon will tune to the next strong station at a higher frequency. Seek Next Station - Down Touching this icon will tune to the next strong station at a lower frequency. Preset Scan/Auto Station Tune Touching this icon will scan through all presets in the current band. (This function can also performed by pressing the AS/PS button.) Holding this button for more than seconds will automatically program the 1 strongest stations available into the presets in the current band. (This function can also be performed by holding the AS/PS button.) Band Touch band icon repeatedly until the desired band is displayed, FM-1, FM-, FM-3, or AM. (This function can also be performed by pressing the BAND button.) 10 11 12 13 14 15 16 17 18 19 Volume Indicator Indicates current volume level, controlled by rotary encoder. Loudness Indicator Touch screen here to enter Audio Setup Menu. EQ Indicator Touch screen here to enter Audio Setup Menu. Current Station Indicator Indicates current frequency. Band Indicator Shows which band the radio is tuned to, FM-1, FM-, FM-3, or AM. 30 XDVD8183 OPERATION AM/FM Tuner Operation AM/FM Tuner Mode From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press MODE until TUNER is displayed on the screen. Band Touch on the screen repeatedly until the desired band is displayed, FM-1, FM-, FM-3, or AM. Press the BAND button to switch between bands, FM-1, FM-, FM-3, AM. From the remote control: Press the BAND button. Manual Tuning Touch Touch on the screen to tune to the next higher frequency step. on the screen to tune to the next lower frequency step. or on the screen to continue tuning across Touch and hold either multiple stations. From the remote control: Touch or to perform manual tuning. Seek Tuning Touch Touch Press Press on screen to tune to the next higher strong station. on screen to tune to the next lower strong station. on front panel to tune to the next higher strong station. on front panel to tune to the next lower strong station. From the remote control: Press or to tune to the next higher strong station. Press or to tune to the next lower strong station. Storing Presets There are 36 FM and 1 AM presets available in 4 bands. After finding a frequency that you would like to store in memory, touch and hold the screen on any of the frequencies in the preset station list until it turns yellow. Touch and hold the icon to automatically program the 1 strongest stations available into the presets in the current band. Press and hold the AS/PS button for more than seconds. Preset Scan Touching the button will scan through all tunable presets in the current band and play them for 10 seconds each. Press the AS/PS button momentarily. 31 Auto Store Presets XDVD8183 OPERATION AM/ FM Tuner Operation Direct Preset Tuning To select a desired station from the preset station list, touch any of the displayed station frequencies from the list. Use Rapid Dial by turning the right rotary clockwise or counter-clockwise, and pressing in to select the highlighted channel. Use the up and down arrows on screen to scroll through the presets. Once highlighted, simply touch the screen at the appropriate preset. From the remote control: Press or to scroll through the presets. When the correct preset is highlighted press OK. Use the numeric keypad to enter the desired preset number. Scan Tuning Local Tuning Touch SCAN on the screen and it will tune you to all stations available with good reception for 10 seconds at a time. Touch SCAN again to disable. Local tuning lets you tune in radio stations with sufficiently strong signals for good reception. In areas that reception is poor, you can switch from local to distance tuning by touching the LOC button on the screen. 3 XDVD8183 OPERATION WARNING Upon installation of this Monitor/DVD player ("unit") into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver's seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver's seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. This unit is designed so that it may be operated only when the vehicle is in "Park" and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in "Park" and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire ("Yellow-Blue Lead") to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage. Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage. When operating this unit, keep the unit's volume level low enough so that the vehicle's occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage. 33 XDVD8183 OPERATION DVD Operation - Parking Brake Initialization SAFETY WARNING CAUTION !!! IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA ENGAGE EMERGENCY BRAKE TO ENJOY VIDEO · The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area. · Audio can be heard while the monitor is closed. · The vehicle must be in park and the parking brake applied to view video on the in-dash monitor. · As a safety feature, "ENGAGE PARKING BRAKE" blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is engaged. By connecting the yellow/blue PARKING BRAKE wire to brake switch circuit as described below, DVD and AV1 audio can be heard while the vehicle is in motion without engaging the parking brake. Follow these two initialization procedures carefully to allow video playback on XDVD8183 front panel TFT: There are two situations that start the PARKING BRAKE sequence. Parking Brake Initialization Situation 1 First situation is while driving: 1) Stop vehicle, put in Park, make sure PARKING BRAKE is off/released ) Depress PARKING BRAKE for 1 second 3) Release PARKING BRAKE for 1 second 4) Depress PARKING BRAKE permanently Note: Once above procedure 1-4 is completed, video will display in approximately 6 seconds. Parking Brake Initialization Situation 2 Second situation is while already parked and the PARKING BRAKE is already applied: 1) Keep vehicle in Park, PARKING BRAKE should be on ) Release PARKING BRAKE for 1 second 3) Depress PARKING BRAKE for 1 second 4) Release PARKING BRAKE for 1 second 5) Depress PARKING BRAKE permanently Notes: Once nd procedure 1-5 is completed, video will display in approximately. 6 seconds. The transition time must be less than seconds between depress and release. This procedure will have to repeated if the IGN is turned off. 34 Front TFT Video Initialization XDVD8183 OPERATION DVD Operation DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed. The XDVD8183 will play discs labeled "Region 1" or "All". DVD region codes: 1 - USA, Canada - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 - China DVD Disc Symbols Notes: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. 35 XDVD8183 OPERATION DVD Operation - Inserting a Disc DVD Loading Slot Eject button Insert CD/DVD with label facing upwards Inserting a Disc With the label facing up, insert a standard size disc into the slot. The panel will close and the disc will automatically begin playback. Other sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features. Note: If PARENTAL Lock is activated and the disc inserted is not authorized, a 4-digit code must be entered and/or the disc be authorized. See "RATING MENU" on page 49. Note: Only one disc can be inserted at a time. Ejecting the Disc Resetting the Loading Mechanism Press the EJECT button. If the disc loads abnormally or an system error occurs, press and hold the eject button for 3 seconds to reset the loading mechanism. The disc will eject and normal operation should resume. 36 XDVD8183 OPERATION DVD Operation - Touch Screen Controls Hidden Touch Screen area while in TUNER mode There are several hidden TOUCH SCREEN areas as outlined below: "A" area can be used in any mode to access MAIN menu. L Hidden Touch Screen areas while in DVD mode "A-F" areas can be used in DVD mode to access: A - Displays MAIN menu B - Displays DVD disc information C - Selects PREVIOUS chapter D - Selects NEXT chapter E - Displays the full DVD transport controls F - Displays GOTO search menu L 37 XDVD8183 OPERATION DVD Operation - Touch Screen Controls Using the hidden Touch Screen Controls A - Displays MAIN menu B - Displays DVD disc information C - Selects PREVIOUS chapter D - Select NEXT chapter E - Displays the full DVD transport controls F - GOTO search menu Note: A DVD disc must be inserted to access these functions and features. L AREA A Access MAIN Menu L AREA B Displays Disc Information L AREA C Selects PREVIOUS Track AREA D Selects NEXT Track L L AREA E Displays DVD Transport Controls L AREA F DVD Search 38 XDVD8183 OPERATION DVD Operation - Touch Screen Controls Using the hidden Touch Screen Controls 1 2 Touch AREA E 3 DVD Mode 4 5 6 7 8 9 From the main menu, touch the DISC icon on the screen to select DVD mode. Title Menu Jumps to the DVD Title menu. Sub-Title Mode Activates sub-titles and cycles between multiple sub-title languages. Play/Pause Touch the Stop Touch the icon to temporarily stop or resume playback. icon to stop the chapter where it is. 1 2 3 4 5 Fast Reverse Touch the icon to fast reverse at x speed. Each touch changes speed from x to 4x to 8x to 0x then back to 1x play. Fast Forward Touch the icon to fast forward at x speed. Each touch changes speed from x to 4x to 8x to 0x then back to 1x play. Repeat icon to repeat the current chapter or title. This icon will Touch the remain highlighted until touched a third time to disable. 6 7 8 Repeat A-B Touch the A B icon once to select a start point. Touch it a second time to select and end point. The A B icon will illuminate and the DVD will then loop from the start point to the end point until touched a third time. Audio Mode Touch this icon to activate alternate audio modes on DVD's that have alternate audio streams. 9 39 XDVD8183 OPERATION DVD Operation - Searching a DVD Searching a DVD L Touch Area F to bring up the Search Window. The Search Window allows a search for a specific time, title or chapter. Searching by Time, Title or Chapter Search by TIME example To search for a specific time, touch the --:--:-- area and an on-screen keyboard will pop up. Use the keyboard to enter a time and touch OK. (For example, to skip to 1 hour, 1 minutes and 19 seconds into the DVD, touch: 1 1 2 1 9 OK.) To search for a specific title and/or chapter, touch the --- / --- area and an on screen keyboard will pop up. Use the keyboard to enter a title and chapter and touch OK. This can be used to select a specific chapter in the current title, a new title or a specific chapter in a new title. (For example, to skip to a specific chapter within the current title, touch the --- on the right and use the keyboard to enter a chapter number, then touch OK. To skip to a different title and start from the beginning, touch the --- on the left and the keyboard to enter a title number, then touch OK. To skip to a specific chapter in a new title: touch the left --- and use the keyboard to enter a title number, DO NOT touch OK, then touch the right --- and use the keyboard to enter a chapter number, Then touch OK.) From the remote control: Press SRCH to bring up the search window, then use the arrows to highlight either the time, title or chapter field and use the numeric keypad to enter the appropriate information and press OK. Notes: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. 40 XDVD8183 OPERATION DVD Operation Playback Control Touch Area E to bring up the on-screen buttons. Touch to fast forward or to fast reverse. Each subsequent press of the button will change the speed from normal to x to 4x to 8x to 0x and back to 1x. From the front panel: Press to fast forward. Press to fast reverse. From the remote control: Press to fast forward. Press to fast reverse. Repeat Mode Touch the Repeat button to repeat either a chapter or title. The first touch activates Repeat Chapter mode and a second touch activates Repeat Title mode. When either mode is active, the Repeat button will be illuminated, and touching it a third time will disable Repeat Mode. From the remote control: Press to select Repeat Chapter, Repeat Title and Repeat Off modes. Note: The Repeat Mode can only be changed while the DVD is playing. Repeat A->B Touch the A B icon once to select a start point. Touch it a second time to select and end point. The A B icon will illuminate and the DVD will then loop from the start point to the end point until touched a third time. From the remote control: Press A B to select a start point and stop point. Press a third time to deactivate. Play/Pause Touching Play/Pause will temporarily stop playback of the DVD. Touching it again will resume playback, Press the PLAY/PAUSE button to pause or resume the DVD. From the remote control: Press OK to temporarily stop and resume playback. Stop Touch Stop to stop playback. Pressing Play at this point will resume playback. If Stop is touched a second time, then playback stops completely and will restart from the beginning of the disc. From the remote control: Press to stop playback of the current chapter. 41 XDVD8183 OPERATION DVD Operation Sub-Titles Touch the SUB.T button to activate Sub-Title mode and select a sub-title language. Each touch will cycle the mode from off to language 1, language , etc., and back to off. From the remote control: Press the SUB-T button to control Sub-Title mode. Notes: · Not all DVDs have sub-titles and when they do, some will only have 1 language. Therefore this function may be disabled or limited. · The Sub-Title Mode can only be changed while the DVD is playing. Audio Mode Touch the Audio Mode icon to change the audio stream. Each touch will cycle the language. From the remote control: Press the AUDIO button to control the Audio Mode. Notes: · Not all DVDs have multiple languages, therefore this function may be disabled or limited. · The Audio Mode can only be changed while the DVD is playing. DVD Disc Information Touch Area B to bring up the DVD Disc Information, which includes: Current/Total Titles and Chapters, elapsed time for current title, EQ Mode and Loudness setting and current time. Press the PIC button to bring up the DVD Disc Information. From the remote control: Press the INFO button to bring up the DVD Disc Information. Zoom Mode From the remote control: Press the ZOOM button to activate Zoom Mode. Each subsequent press of the button will change the magnification from normal to 1 to to 3 to 4 and back to normal. When Zoom Mode is active, the arrows on the remote will pan the screen up, down, right and left. Touch the Title Menu icon to return to the DVD's main menu. From the remote control: Press TITLE to return to the DVD's main menu. Press ROOT to move up one level on the DVD's menus. (For example, when viewing bonus materials, the ROOT button will return to the bonus menu instead of the main menu.) Pressing ROOT again will usually return to the current chapter. Note: On some DVD's the TITLE and ROOT buttons may be reversed. 4 DVD Title Menu XDVD8183 OPERATION DVD Setup Menu - Language LANGUAGE Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the unit in DVD mode, press AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. L Press to select desired disc subtitle language. L English French Spanish Auto Off = DEFAULT Press the LANGUAGE icon to select LANGUAGE setup page. Disc Subtitle L Audio Language L L