Detailed instructions for use are in the User's Guide.
Contents
About Your New Label Maker ........................................................................ 5 Product Registration .......................................................................................................5 Getting Started ............................................................................................ 5 Connecting the Power.....................................................................................................5 Inserting the Batteries ................................................................................................5 Connecting the Optional Power Adapter .....................................................................6 Inserting the Tape Cassette.............................................................................................6 Using the Label Maker for the First Time........................................................ 7 Getting to Know the Label Maker .................................................................. 7 Power .............................................................................................................................7 LCD Display......................................................................................................................8 Format ............................................................................................................................8 Insert ..............................................................................................................................8 Settings ..........................................................................................................................8 CAPS Mode......................................................................................................................8 Num Lock ........................................................................................................................9 Backspace .......................................................................................................................9 Clear ................................................................................................................................9 Navigation Keys ..............................................................................................................9 Cancel .............................................................................................................................9 Formatting Your Label .................................................................................. 9 Changing the Font Size ...................................................................................................9 Adding Font Styles ........................................................................................................10 Adding Borders and Underline Styles ...........................................................................10 Creating Two-Line Labels..............................................................................................11 Aligning the Text...........................................................................................................11 Creating Fixed-Length Labels .......................................................................................1 Using Mirror Text ..........................................................................................................1
Using Symbols and Special Characters ......................................................... 12 Adding Symbols ............................................................................................................1 Adding Punctuation ......................................................................................................14 Using the Currency Key .................................................................................................14 Adding International Characters ...................................................................................14 Printing Options......................................................................................... 14 Previewing Your Label ..................................................................................................14 Printing Multiple Labels................................................................................................15 Adjusting the Print Contrast .........................................................................................15 Using the Label Maker Memory ................................................................... 15 Saving a Label ...............................................................................................................15 Opening Saved Labels ..................................................................................................16 Inserting Saved Text .....................................................................................................16 Caring for Your Label Maker ........................................................................ 16 Troubleshooting......................................................................................... 18 DYMO D1 Label Cassettes ............................................................................ 19 Power Adapter ........................................................................................... 19 Documentation Feedback ........................................................................... 20 Environmental Information ........................................................................ 21
17
18
19
0
1
1
16 15 14
4 5 6
1
7 8
1
11
10 9
Figure 1 LabelManager 210D Electronic Label Maker
1 2 3 4 5 6 7 8 Tape cutter button Print Save OK Number lock Backspace Currency Return 9 10 11 12 13 14 15 16 Accented character Punctuation Space bar Insert CAPS Format Settings Power 17 18 19 20 21 22 23 AC power connector Clear Recall Navigation LCD display Cancel Preview
4
About Your New Label Maker
With the DYMO LabelManager 10D electronic label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 6 mm, 9 mm, or 1 mm. These tape cassettes are available in a wide range of colors. Visit www.dymo.com for information on obtaining labels and accessories for your label maker.
Product Registration
Visit www.dymo.com/registration to register your label maker online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker is powered by standard batteries or an AC power adapter. To save power, the label maker automatically turns off after two minutes of inactivity.
Inserting the Batteries
The label maker uses six high-capacity AA alkaline batteries. To insert the batteries 1. Slide the battery compartment cover away from the label maker. See Figure . . Insert the batteries following the polarity markings (+ and Â). . Replace the cover. Ç Remove the batteries if the label maker will not be used for a long period of time.
Figure 2
5
Connecting the Optional Power Adapter
An optional 9 Volt, 1.5 A power adapter can also be used to power the label maker. Connecting the AC adapter to the label maker disconnects the batteries as a power source. To connect the power adapter 1. Plug the power adapter into the power connector on the top, left side of the label maker. . Plug the other end of the power adapter into a power outlet. x sure the label maker power is turned off before Make you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost.
Inserting the Tape Cassette
Your label maker comes with one tape cassette. You can purchase additional tape cassettes from your local office supply retailer. To insert the tape cassette 1. Lift the tape cassette cover to open the tape compartment. See Figure . x Before using the label maker for Guideposts the first time, remove the protective Remove cardboard insert from the tape exit slot. cardboard insert See Figure 4. . Insert the cassette with the label facing up Click! and positioned between the guideposts. . Press firmly until cassette clicks into place. See Figure 5. 4. Close the tape cassette cover.
Click!
Figure 3
Figure 4
Figure 5
6
Using the Label Maker for the First Time
The first time you turn on the power, you are asked to select the language and units of measure. These selections will remain set until you change them, or until the label maker is reset. You can change these selections using the Settings key. To set up the label maker 1. Press { to turn on the power. . Select the language and press }. By default, the language is set to English. The language option you choose determines the character set that is available. . Select inches or mm and press }. 4. Select the width of the tape cassette currently inserted in the label maker. You are now ready to print your first label. To print a label 1. Enter text to create a simple label. . Press G. . Select the number of copies. 4. Press } to print. 5. Press the cutter button to cut the label. Congratulations! You printed your first label. Continue reading to learn more about the options available for creating labels.
Getting to Know the Label Maker
Become familiar with the location of the feature and function keys on your label maker. Refer to Figure 1. The following sections describe each feature in detail.
Power The { button turns the power on and off. After two minutes of no activity, the power is
switched off automatically. The last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored.
7
LCD Display
You can enter up to 99 characters and spaces. The display shows about thirteen characters at a time. The number of characters displayed will vary due to proportional spacing. With DYMO's exclusive graphical display, most of the formatting you add is visible instantly. For example, the italics and rounded border added to the text below is clearly displayed.
Feature indicators along the top of the LCD display appear black to let you know when a feature is selected.
Format The 2 key displays the Font Size, Clear Format, Mirror, Label Length, Alignment,
Underline, Borders, and Style submenus. These formatting features are described later in this User Guide.
Insert The 8 key allows you to insert symbols or saved text on your label. These features are
described later in this User Guide.
Settings The I key displays the Language, Units, Label Width, and Contrast menu selections.
These features are described later in this User Guide.
CAPS Mode
The key toggles capitalization on and off. When CAPS mode is on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters appear in lower case.
8
Num Lock
The key provides access to the numbers located on some of the alphabetic keys. When Num Lock mode is turned on, the Num Lock indicator is shown on the display and the numbers 0 through 9 appear when you press the corresponding letter keys. Num Lock is turned off by default.
Backspace The 0 key removes the character to the left of the cursor. Clear The 6 key gives you a choice to clear all label text, just the text formatting, or both. Navigation Keys
You can review and edit your label using the left and right arrow keys. You can also navigate through menu selections using the up and down arrow keys, and then press } to make a selection.
Cancel The 7 key allows you to exit from a menu without making a selection or to cancel an action.
Formatting Your Label
You can choose from a number of formatting options to enhance the appearance of your labels.
Changing the Font Size
Six font sizes are available for your labels: Extra Small, Small, Medium, Large, Extra Large, and Extra Extra Large. The font size you select applies to all characters on a label. To set the font size 1. Press 2. . Select Font Size and press }. . Select the desired font size and press }. The font size indicator on the display changes as you select font sizes.
9
Adding Font Styles
You can choose from six different font styles:
AaBbCc AaBbCc AaBbCc Normal Bold Italic Outline Shadow Vertical
a
The style you select applies to all characters. Styles can be used with alphanumeric characters and some symbols. To set the font style 1. Press 2. . Select Style and press }. . Select a font style and press }.
Adding Borders and Underline Styles
You can highlight your text by choosing a border or underline style.
> ¢
Underline Square Rounded Edged Pointed
Parchment Callout
¿
Flowers Crocodile
A label can be underlined or enclosed in a border, but not both together.
10
To add a border style 1. Press ...
