OPERATING INSTRUCTIONS FOR meos e-pill MeDose VIBRATING 6 ALARM MEDICATION REMINDER WATCH Manufacturer: ROLAND the apple pro production inc Box 4189, SE-227 22 Lund, Sweden Distributor: e-pill, LLC | 70 Walnut Street | Wellesley, MA 02481, USA Phone (781) 239-8255, Fax (781) 235-3252 Toll-Free 1-800-549-0095 Order your e-pill MeDose on-line: www.epill.com Version 030723 e-pill MeDose OPERATING INSTRUCTIONS e-pill Medose Vibrating 6-Alarm Medication Reminder Watch BASIC FUNCTIONS FEATURES The e-pill Medose Vibrating Medication Reminder Six Alarm Watch is an innovative device to help improve patient compliance. · · · · · Up to 6 daily alarms Choice of vibration or sound alarm No alarm reset required 5 modes of operation: Normal Time, Dual Time Zones, Alarms, Count Down Timer & Chronograph Easy to read large display with back light BACK LIGHT Tap button D for Back Light (3 seconds illumination). CHANGE DISPLAY Press button C to change displays. The sequence is as follows: ->TIME ->ALARM ->TMER ->CHRONOMETER -> VIBRATION or BEEP SOUND ALARM Press & hold button A for 5 seconds to toggle between Vibration or Beep Sound alarm. A small "W" will appear in the display (top left) when the MeDose is in Vibration mode. The alarm lasts for 20 seconds. Tap any button to stop the alarm. The MeDose will give a brief alarm on the hour if the chime function is on. HOW TO SET THE CORRECT TIME · Tap button C until mode prompt "TIME" is reached. · Press & hold button D for 5 seconds to enter setting mode. The seconds will start flashing · Tap C · Tap A until the correct Hour is reached. Please note the PM indicator above the Seconds · Tap C · Tap A until the correct Minute is reached. · Tap C · Tap A until the correct Year is reached. · Tap C · Tap A until the correct Month is reached (1=January, 2=February ... 12= December) · Tap C · Tap A until the correct Day of the Month is reached. · Tap C · Tap A until the correct Day of the Week is reached. (TU=Tuesday, TH=Thursday) · Tap C · Tap A if you want military time (24 hour clock). · Tap D to leave setting mode. Congratulations - you have now set your MeDose watch to the correct time. HOW TO SET DAILY ALARMS · · Tap button C until mode prompt "ALARM" ("AL-# " or "Chime") is reached. Tap button B to go to the alarm you want to set (Alarm-1 is AL-1, Alarm-2 is AL-2, Alarm-3 is AL-3, Alarm-4 is AL-4, Alarm-5 is AL-5, Alarm-6 is AL-6 and CHIME is the 7th alarm). For each DAILY alarm do the following: · · · · · Press & hold button D for 5 seconds to enter setting mode. The hours will start flashing. Tap A until the correct Hour is reached. Please note the PM indicator above the Seconds. Tap C Tap A until the correct Minute is reached. Tap D to leave setting mode. Make sure ON is displayed next to the minutes. If "ON" is not showing you can toggle to ON by tapping A. Proceed to your next alarm by tapping B. RESET Press all four buttons for 5 seconds and release. This will re-set the internal computer (this only needs to be done after a battery change). HOW TO USE COUNT DOWN TIMER The MeDose watch offers three count down timer modes. Each mode can be up to 99 minutes and 59 seconds long (1 hour and 40 minutes). · Tap button B to select Count Down Stop (CS), Count Down Up (CU), or Count Down Repeat (Cr) function. HOW TO SET AN ALARM SPECIFIC DATE AND TIME · · Tap button C until mode prompt "ALARM" is reached. Tap button B to go to the alarm you want to set. Alarm-1 is AL-1, Alarm-2 is AL-2, Alarm-3 is AL3, Alarm-4 is AL-4, Alarm-5 is AL-5, Alarm-6 is AL-6 and CHIME is the 7th alarm. Once you have made your count down selection: · · · · · · Press & hold button D for 5 seconds to enter setting mode. The minutes will start flashing. Tap A until the correct Minute is reached. Tap C Tap A until the correct Second is reached. Tap C Tap D to leave setting mode. For each SPECIFIC alarm do the following: · · · · · · · · · · · Press & hold button D for 5 seconds to enter setting mode. The hours will start flashing. Tap A until the correct Hour is reached. Please note the PM indicator above the Seconds. Tap C Tap A until the correct Minute is reached. Tap C Tap A until the correct Month is reached. Tap C Tap A until the correct Day of the Month is reached. Tap C Tap A for the correct Time Zone (T1or T2) Tap D to leave setting mode. Make sure ON is displayed next to the minutes. If "ON" is not showing you can toggle to ON by tapping A. Proceed to your next alarm by tapping B. Note The six (6) alarms operate independently. If month & date of the alarm is set to "--", the alarm will act as a daily alarm (no reset required). Use button A to start and stop the count down timer. Note 1. The Count Down Timer features 1 second increments with a working range from 1 second to 99 minutes 59 seconds. 2. The watch will sound 3 beeps at 3 minutes, 2 beeps at 2 minutes, and 1 beep at 1 minute before the timer counts down to zero. The watch will beep for 5 seconds when the timer reaches zero. 3. When the timer is stopped, pressing button B will change the timer function and the preset time will be reloaded. In Count Down Up (CU) function, as the time is counting up after the timer counts down to zero, an arrow pointing upwards will be displayed. Battery: Replaceable CR2032 3V Button Cell We suggest you take the watch to a jeweler to have the battery replaced. HOW TO USE THE CHRONOGRAPH The MeDose watch offers a precise and simple to use chronograph ("stop watch") function. · Tap button C until mode prompt "Chron" is reached. OPERATION OF BUTTONS A 1) Select vibration or sound (press & hold) 2) Alarm & chime (arm or disarm) 3) Start or stop the timer 4) Start or stop the chronograph 5) Set/advance digits Press button A to start the chronograph. "Run" will be displayed. · · Tap button A to START and STOP. Tap button B to RE-SET the chronograph. B 1) View normal time or dual time 2) Select normal or dual time (press and hold) 3) Select alarm or chime 4) Select timer function 5) Set "Split", "Lap" or re-set chronograph 6) Select setting digits (set) Press button B to record split and lap times. First, split time and "SPL" will be displayed for 6 seconds and then lap time and "LAP" will be displayed. C 1) Mode change 2) Select setting digits (set) HOW TO SET THE HOURLY CHIME The MeDose will give a brief alarm on the hour if the chime function is on. A small "bell" will appear in the display (top left) when the chime function is on. · · · Tap button C until mode prompt "ALARM" is reached. Tap button B to go to CHIME (chime is the" 7th Alarm") Tap A to toggle between chime ("ON" and "Bell Symbol") or off ("--" ). D 1) Back Light 2) Set (press and hold) 3) Reload preset timer 4) Fast escape from split/lap display 5) Exit set (set) 4) Fast escape from split/lap display 5) Exit set (set) GUARANTEE This watch is designed to help the wearer to remember his/her medication on time. The manufacturer ROLAND, the apple pro production inc assumes no responsibility whatsoever for any inconvenience or non-compliance to medications in the event the watch fails to function. WARNING: This Operating Instruction is protected by copyright. ©Copyright e-pill, LLC, 2001, 2002, 2003 e-pill®, MeDos and Medose are trademarks owned by ROLAND, the apple pro production inc or by e-pill, LLC ROLAND, the apple pro production inc, covers manufacturing defects for one year from date of purchase. Battery, straps, glass or damage cased by misuse is not covered. In case of defect, send the watch to: ROLAND, the apple pro production inc Service Center Box 4189 SE-227 22 Lund Sweden Distributor in the USA, Canada and Mexico e-pill, LLC 70 Walnut Street Wellesley, MA 02481, USA 781-239-8255 or Toll-Free: 800-549-0095 Order on-line: www.epill.com fax 781-235-3252 Version 031003 ...