Detailed instructions for use are in the User's Guide.
DIGITAL PICTURE FRAME WITH MP3 PLAYER 7"
4120 Ver1(01-06 )
User's Manual
NEED HELP? FOR TECH SUPPORT CONTACT www.edgetechcorp.com/support
Table of Contents
Repeat Mode.......Error! Bookmark not defined. MAIN FEATURES............................................ 3 PRECAUTIONS & MAINTE NANCE ................ 4 GETTING STARTED ....................................... 5 TROUBLESHOOTING....................................16 INSERTING MEMORY CARDS ....................... 6 Q & A.....ERROR! BOOKMARK NOT DEFINED. VIEWING PICTURES ....................................... 6 SPECIFICATIONS..........................................18 CONTROL LOCATION..............................8 CERTIFICATION ............................................18 INSTALLING AND REPLA CING BATTER ... 8 Y MECHANICAL................................................18 LISTENING TO MP3 MUSIC ......................... 10 ENVIRONMENTAL OPERATING RANGES ..18 WATCHING VIDEO ....................................... 10 VIEWING FILE STRUCTURE ........................ 11 TV CONNECTION.......................................... 11 SPEAKER CONNECTION............................. 12 MOUNTING THE PICTURE FRAME............. 12 ADVANCED SETTINGS ................................ 13 PLAY PICTURE WITH MP MUSIC.............. 13 3 SETUP MENU ................................................ 13 Photo Setup............... Error! Bookmark not defined. Thumbnail Digest Error! Bookmark not defined. Transition Mode .. Error! Bookmark not defined. Music Setup.............. Error! Bookmark not defined. Repeat Mode ...... Error! Bookmark not defined. Slideshow Setup........ Error! Bookmark not defined. Slideshow Mode . Error! Bookmark not defined. Folder Repeat ..... Error! Bookmark not defined. Interval Time...... Error! Bookmark not defined. Transition........... Error! Bookmark not defined. Movie Setup.............. Error! Bookmark not defined. Interval Time...... Error! Bookmark not defined. References ................ Error! Bookmark not defined. TV Type .............Error! Bookmark not defined. Video Output.......Error! Bookmark not defined. OSD LANG ........Error! Bookmark not defined. Default ...............Error! Bookmark not defined.
i
Introduction
Thank you for purchasing the Digital Picture Frame by EDGE TM! this innovative display method of all your digital memories! We know you will enjoy Before operating the unit, please read this manual thoroughly and retain it for future reference. This manual will help you use many of the exciting a nd useful features to make your Digital Picture Frame viewing more enjoyable. This Digital Picture Frame lets you view digital pictures directly from your camera's memory cards. You will be able to create a slideshow using multiple transition effects or display one picture at a time. No computer, digital camera, or Internet connection is required. The Digital Picture Frame by EDGE is compatible with the following popular memory card formats: SD Memory CardsTM, MultiMediaCard sTM, CompactFlash®, IBM MicrodriveTM, Memory Stick®, and Memory Stick PRO®.
For questions or assistance with this product, visit our website at www.edgetechcorp.com/support or call us, toll-free at 1-800-259-6565.
Chapter 1
Main Features
· · · · · · · · · · · · · ·
1
Displays digital pictures (JPEG) without a computer. Simply insert a compatible memory card into the digital frame to show photos, play MP3 music or supported video files (memory card not included). Compatible memory cards include SD Memory Cards, MultiMedia Card (MMC), Memory Stick, Memory Stick Pro, IBM Microdrive , & Compact Flash (CF). Instantly plays MP3 music with the integrated speakers. Instantly plays MPEG-I, MPEG-IV files stored on supported memory cards*. Instantly plays MPEG-II files stored on Compact Flash Card (CF)*. Supports the new mobile phone video file format 3GP. Supports up to 12 Mega Pixels image files (JPEG format). Compatible with most digital cameras' stored JPEG images and motion JPEG files. Includes a credit card style remote control Bright 7" TFT active matrix LCD screen. Automatic slide show with multiple transition effects and display times. Plays slide show with MP3 music on the background. User-friendly on-screen display lets you access all controls easily.
*Video files may not play properly if stored on a low speed card.
3
2
Chapter 2
Precautions & Maintenance
l The digital picture frame is for indoor use only. l To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture. l Do not block the ventilation holes on the back of the Digital Picture frame at any time. l Keep your digital picture frame out of sunlight. Direct sunlight may cause damage. l Always use the eject buttons on the memory storage cards slots to remove the memory storage cards. l Do not open the case of the Digital Picture frame. There is a risk of electric shock, and there are no user serviceable parts inside. Opening the case will void your warranty. l Do not use the Digital Picture frame if conditions could allow condensation to occur, or damage may result.
Cleaning the LCD screen
· · · Treat the screen gently. The screen on the Digital Picture frame is made of glass and can be scratched or broken. If fingerprints or dust make the LCD screen dirty, we recommend using a soft, non-abrasive cloth such as the camera lens cloth to clean the LCD screen. If you use a LCD Cleaning Kit, do not apply the cleaning liquid directly to the LCD screen. Clean the LCD screen with cleaning cloth moistened with the liquid.
4
Chapter 3
Getting Started
3
1. Adjust the Digital Picture Frame bracket on the back to the widest degree for propping stability then p lug the power adapter into an electrical outlet.
Note: There are three stages for the Digital Picture Frame bracket, Please adjust it to at
least first stage for propping stability before initial use
2. Turn on the Digital Picture Frame by pressing the power button on the remote control or on the left side of the digital frame.
5
Inserting Memory Cards
The digital picture frame is compatible with the following memory cards: · SD Memory Cards · MultiMedia TM Card (MMC) · Memory StickTM & Memory Stick Pro TM · CompactFlashT M Cards · IBM Microdrive ® Insert the memory card with the front label facing AWAY from you. Do not force the memory card into the memory slot. If you are not able to easily insert the memory card completely, you may have inserted it the wrong way.
Note: The digital picture frame will ONLY recognize digital pictures stored in JPEG
format. Digital pictures stored in other formats will be ignored by the device.
If the card is inserted correctly and you have more than one supported media file on the card you will see the following screen. If you only have one file on the card it will dis play one thumbnail. Make sure you have at least one picture on the memory card. The frame will not function properly without a stored picture.
Viewing Pictures
1. You can use either the remote control or the on-board buttons to control the Picture Frame. Please refer to the next section "Control Locations" for details.
6
2. Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure the remote control has a battery installed. See "Installing and replacing battery" section if you need a new battery. 3. Use the remote control to highlight and select the Photo folder (Use the direction keys Right, Left on the remote control to navigate and press Enter to select).
4. Highlight a picture and press Enter to view the picture. 5. Adjust the contrast of the screen using theContrast Dial on the right side of the frame. 6. Press the Brightness key(13) to adjust the brightness setting. 7. Press the Setup button on the remote control to enter the Setup Menu . 8. Move to Slideshow Setup by pressing the Down button. Press Enter to continue.
9.
Use the Down key to select the Interval Time . Use the Right direction key to enter the time sections. Move up and down to select the desired transition time of a picture and press Enter to select. Press the Setup button to exit the Setup menu.
Note: The Interval Time functions only when the Slide Show Mode is set to Auto.
10. To disable the slideshow function, select Setup, Slideshow Setup, Slideshow Mode and Manual. You will be able to change the displayed picture by pressing Next (15) or Previous (16) key.
See "Advance Settings" section for more control settings.
Caution
If you connect the Digital Picture Frame to a European-standard TV, please switch the Digital Picture Frame to PAL mode by pressing MENU (7) and then NTSC/PAL key (19) on the remote control. Note:
1. The original display mode setting of the Digital Picture Frame is NTSC. 2. When viewing a picture on the Digital Picture Frame with PAL mode, the display of the Digital Picture Frame will become vague. **The NTSC mode applies to North America. The PAL mode applies to all countries in Europe . **
7
Control Locations
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
Power on/off Right Left Enter Down Up Menu PIC+MP3 Setup Volume up/down Info Repeat
Brightness Mute Next Previous FF(Fast Forward) FR(Fast Rewind) NTSC/PAL Picture Rotate Zoom in/out Stop (23) Play/pause
(13) (14) (15) (16) (17) (18) (19) (20) (21) (22)
Installing and replacing the battery
1. Place the Remote Control with the control buttons facing downward. 2. While p ressing down on the ridged area of the battery cover p ull the tray out. 3. Place a "CR2025" lithium battery on the tray with the positive "+" end facing toward you. 4. Close the tray.
8
9
Listening to MP3 music
Before you are able to liste n to MP3 music files , you must first store MP3 music files on the memory card (see Q&A section for more information). 1. Use the Remote Control's Right and Left key highlight and select the Music folder. 2. Highlight and select the music file you want to play by pressing the direction keys and the Enter button.
3. Adjust the volume by using volume up/down key (10). 4. Fast forward or rewind by pressing the FF (17) or FR (18) key. 5. Press Next (15) or Previous (16) key to select a different music file.
See "Advance Set tings" section for more control settings.
Watching video
The Digital Picture Frame supports the following video formats:
· · · · · Motion JPEG (avi): video format used by most digital cameras MPEG-I MPEG-II (stored on CF Card only. Other memory cards may not play properly) MPEG-I 3GPP
Before you are able to watch video, you must first store video files on the memory card. 1. Highlight and select the Video folder.
10
2. Highlight and select the video you want to watch by pressing the direction keys and the Enter button. 3. Adjust the volume by using volume up/down key (10). 4. Fast forward or rewind by pressing the FF (17) or FR (18) key. 5. Press Next (15) or Previous (16) key to select a different video clip.
See "Advance Settings" section for more control settings.
Viewing File Structure
Highlight and select the File folder.
You can browse all the picture, music and video files under the File structure. You can also select and play any supported file by pressing the Enter button.
TV Connection
Use the supplied S-video out cable to connect the digital picture frame to a TV. Turn off both the frame and the TV before you make the connection.
Movable Bracket Contrast TV out Earphone Jack
11
Speaker Connection
Connect speakers to the earphone jack located on the right side of the picture frame.
Mounting the Digital Picture Frame
The 7mm mounting hole on the back of the Digital Picture Frame as shown below is used to m ount your Digital Picture Frame. When wall mounted, make sure the mounting hole aims at the #6 screw then mount the picture frame directly and slightly.
Note: For the appropriate screw size #6 is advised.
12
Chapter 4
Advanced Settings Display Pictures with MP3 music
1. On the main Menu, select the Photo folder.
4
2. Press PIC.+MP3 button (8) on the remote control to display photos and play music . 3. Press PIC.+MP3 button (8) again to stop playing.
Setup Menu
Press the SETUP button on the remote control to enter the Setup Menu.
Photo Setup
Video Output · 4:3: Select 4:3 when you connect the digital frame to an external TV or monitor with a screen aspect ratio of 4:3. · 16:9: Select 16:9 when you want to view pictures on the 7-inch LCD or when your external TV or monitor is with a 16:9 aspect ratio. The default Video Output mode is "16:9" . Transition Mode · Fast: Speeds up the photo transition effect. · Slow: Slows down the photo transition effect. The default transition mode is "Fast". Digest Style Select the on-screen digest style from the list. 2x2, 3x3 , 4x4, 5x5 matrix thumbnail modes are supported. The default digest style is 3x3 matrix.
Music Setup
Repeat Mode · One : Repeats one music file. · Off: Plays the entire play list once.
13
· All: Repeats the entire ...