User manual ELECTROGRAPH DTS55PTD

ATSC/NTSC Ver. HVP 1.01 E Part No. 4U420V02-01 Contents Foreword Caution ............................................................................................................................................ 3 Important Safety Instructions ...................................................................................................... 4 Precaution ...................................................................................................................................... 5 Overviewing the TV Viewing the Control Panel ............................................................................................................ 10 Viewing the Connecting Panel ................................................................................................................ 11 Viewing the Remote Control .................................................................................................................... 13 Button Description ...................................................................................................................................... 13 PIP (Picture in Picture) .............................................................................................................................. 14 Loading the Batteries ................................................................................................................................ 16 Installation Table Stand Installation (optional) ................................................................................................ 17 Speaker Installation (optional) (HP-XXXXV Only) ...................................................................... 19 Connection the Cable/Devices Connecting the TV Cable .............................................................................................................. 20 Connecting the VCR ...................................................................................................................... 21 Connecting the DVD ...................................................................................................................... 22 Connecting the Set Top Box ........................................................................................................ 24 Connecting the PC [ D-Sub & DVI ] .............................................................................................. 25 Displayable TV Specification ........................................................................................................ 26 Setting the Channel Basic Operation .............................................................................................................................. 27 OSD Menu Structure ...................................................................................................................... 28 Choosing the Channel Type .......................................................................................................... 29 Storing Channels Automatically .................................................................................................. 29 Adding or Deleting the Channels ................................................................................................ 30 Fine Tuning the Channel Reception ............................................................................................ 30 Editing the Channels .................................................................................................................... 31 Digest Function .......................................................................................................................................... 32 Setting the Picture Changing the Picture Mode .......................................................................................................... 33 Adjusting the User Mode ............................................................................................................................ 33 Changing the Color Temperature ................................................................................................ 35 Changing the Color Enhancer ...................................................................................................... 35 Video NR (Noise Reduction) ........................................................................................................ 36 Changing the Screen Form .......................................................................................................... 36 Selecting the Black Enhancer ...................................................................................................... 37 Position .......................................................................................................................................... 38 Adjusting the User Mode ............................................................................................................................ 38 Setting the Sound Adjusting the Sound Balance ...................................................................................................... 40 Changing the Sound Mode .......................................................................................................... 40 OWNER'S MANUAL 1 Contents Setting the Sound User Adjust .................................................................................................................................... 41 Spatial Effect ................................................................................................................................................ 41 AVC (Auto Volume Control) ...................................................................................................................... 41 MTS (Multichannel Television Sound) .................................................................................................... 42 Digital Output (HDTV Mode Only) .......................................................................................................... 42 Setting the Others Adjusting the Transparency of the OSD Window ...................................................................... 43 PIP (Picture in Picture) .................................................................................................................. 43 Changing the Size in PIP ........................................................................................................................ 44 Changing the Source in PIP .................................................................................................................... 44 Picture Swap in PIP (Picture in Picture) .................................................................................................. 45 Position in PIP .......................................................................................................................................... 45 V-Chip (TV Parental Guidelines) .................................................................................................. 46 TV Block in V-Chip .................................................................................................................................... 46 Movie Block in V-Chip .............................................................................................................................. 47 Change Password in V-Chip .................................................................................................................... 47 V-Chip Blocking in V-Chip.......................................................................................................................... 47 Advanced ........................................................................................................................................ 48 Set ID in Advanced .................................................................................................................................. 48 Blue Back in Advanced ............................................................................................................................ 48 Language in Advanced ............................................................................................................................ 49 Front Key Lock in Advanced .................................................................................................................... 49 Burn Protect in Advanced ........................................................................................................................ 49 Burn Clear in Advanced ............................................................................................................................ 49 HDTV Setup (HDTV Mode) ............................................................................................................ 50 Time Zone in HDTV Setup (HDTV Mode) .............................................................................................. 50 Daylight in HDTV Setup (HDTV Mode) .................................................................................................. 51 HDCCD Setup (HDTV Mode Only) ................................................................................................ 51 Setting the Time Setting the Current Time .............................................................................................................. 52 Setting the On Time ...................................................................................................................... 52 Setting the On Channel ................................................................................................................ 53 Setting the On Volume .................................................................................................................. 53 Setting the Off Time ...................................................................................................................... 54 Setting the Sleep Timer ................................................................................................................ 54 OSD Menu Tree Troubleshooting Specification .......................................................................................................................... 55 ........................................................................................................................ 63 Specification-42" PDP Specification-42" PDP Specification-42" PDP Specification-42" PDP Specification-50" PDP Specification-50" PDP Specification-55" PDP Specification-63" PDP .................................................................................................................... 64 .................................................................................................................... 65 .................................................................................................................... 66 .................................................................................................................... 67 .................................................................................................................... 68 .................................................................................................................... 69 .................................................................................................................... 70 .................................................................................................................... 71 Warranty Card 2 OWNER'S MANUAL ............................................................................................................................. 72 Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. CAUTION The stand intended for use only with This TV. Use with other apparatus is capable of resulting in instability causing possible injury. WARNING - Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. - This is Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. - To reduce the risk of fire and electric shock, do not expose this product to rain or moisture. FCC NOTICE This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in home environment as well as in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Read all safety and operating instructions before operating your the TV. Keep the safety and operating instructions for future reference. Heed all warnings on the TV and in the operating instructions. OWNER'S MANUAL 3 Important Safety Instructions Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use the attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 9. 10. 11. 12. 13. 14. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. When installing the PDP TV, do not block the appliance coupler with any structure. User can easily have access to the coupler to disconnect it from AC main power. 15. 4 OWNER'S MANUAL Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. - when power supply cord or plug is damaged. - If liquid has been spilled on the unit or if alien objects have fallen into the unit. - If the TV has been exposed to rain or water. - If the TV does not operate normally by following the operating instructions. - If the TV dropped or the cabinet has been damaged. - When the TV exhibits a distinct change in performance. Setting NO! ! CAUTION Follow all operating and use instructions. Do not use the TV where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal. Ground outdoor antennas. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. NO!! Bend antenna cable between inside and outside building to prevent rain from flowing in. - This may cause water damaged inside the TV and could give an electric shock. Do not place an outside antenna in the vicinity of overhead power lines, or other electric light or power circuits. - This may cause an electric shock. There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. - This may cause an electric shock. OWNER'S MANUAL 5 Precaution Setting WARNING When installing the TV on a table, be careful not to place it too close to the edge of the table. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. Provide ventilation for the TV. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the TV on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the TV on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting. This plasma display is designed to be mounted horizontally (wide viewing). Any inquiry regarding its vertical position should be forwarded to the manufacture directly. 6 OWNER'S MANUAL Precaution Power CAUTION Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC 100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer. Unplug the TV from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges. Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Do not touch the plug with wet hand. - It can make an electric shock. Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet. Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. OWNER'S MANUAL 7 Precaution Operation CAUTION Upon completion of any service or repairs to this the TV, ask the service technician to perform safety checks to determine that the TV is in a safe operating condition. Do not place anything containing liquid on top of the TV. - This may cause a fire or could give an electric shock. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury. In case of smoke or strange smell from the TV, switch it off, unplug it from the wall outlet and contact your dealer or service center. - This may cause a fire or could give an electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the TV. Operation WARNING When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in additional damage to the unit. If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to normal. Do not let children hang on or ride on the TV. 8 OWNER'S MANUAL Precaution Operation WARNING Do not use new battery with old one. - This can lead a fire or electric shock caused by leakage liquid from abused batteries. Put the batteries in right direction (+/-). - Otherwise, it can make a fire, injury and pollution caused by bursting of batteries. Only use the specified batteries. - This make cause damaged the TV or could give an electric shock. More than two people are necessary to move or take off the package due to the product's weightiness. - Otherwise, it can cause personal injury. Keep the batteries out of reach of children when exchanged. - Seek urgent medical advice if child swallows a battery. Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR, 4:3 picture format or if a CH label is present; the fixed image may remain visible on the screen. When moving the TV assembled with speakers do not carry holding the speakers. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. The distance between eyes and the screen should be about 5~7 times as long as diagonal length of the screen. - If not, eyes will strain. OWNER'S MANUAL 9 Viewing the Control Panel OSD Button Position Front Panel SOURCE /SELECT MENU - VOL + MOVE (HP-XXXXVP) OSD Button 1 2 3 4 5 6 (HP-XXXXV) Input Source Select Up (See the box below) Down (See the box below) Stand By Remote Sensor Status/Power Indicator LED OSD Button Function INPUT SELECT 1 2 3 4 5 6 7 8 Stand By Remote Sensor Source/EXIT Menu/SET VOLVOL+ CHCH+ Select the signal source from multiple input sources such as TV, HDTV, VIDEO1, VIDEO2, S-VIDEO/AV, COMPONENT1, COMPONENT2, PC, DVI and HDMI. VOL / CH (HP-XXXXV) OR VOL/CH -/+ (HP-XXXXVP) To change the CHANNEL, press button first and change the channel with , buttons. To change the VOLUME, press button first and change the volume with , buttons.(HP-XXXXV Only) To change the CHANNEL and VOLUME.(HP-XXXXV Only) Stand By On/Off Turn the TV on and off. Menu(HP-XXXXVP Only) Call the OSD Menu. Accessories Remote Control Handset Power Cord RF Cable Alkaline Batteries Owner's Manual 10 OWNER'S MANUAL Viewing the Connecting Panel Back Panel and Jacks Back panel of the TV Back panel of the TV (HP-XXXXV) (HP-XXXXVP) (HP-XXXXVP) (HP-XXXXV) (HP-XXXXVP) 1 2 3 4 5 6 7 8 9 10 DVI & D-Sub (PC) Sound DVI HDMI RS-232C D-Sub (PC) COMPONENT1, 2 COMPONENT Sound1, 2 VIDEO1 VIDEO OUTPUT2 VIDEO2 11 12 13 14 15 16 17 18 19 SPDIF (optical) Phone Jack AV S-VIDEO S-VIDEO/AV Sound A-TV Antenna D-TV Antenna Speaker (HP-XXXXV Only) AC Power OWNER'S MANUAL 11 Viewing the Connecting Panel DVI, D-Sub (PC) Sound Cable Connect (1) port. DVI Cable Connect (2) port. HDMI Cable Connect (3) port. RS-232C Cable Connect (4) port. D-Sub (PC) Cable Connect (5) port. Component Cable Connect (6) port. Component & S-Video & AV Sound Cable Connect (7) and (15) port. RCA Cable Connect (8), (9), (10) port. SPDIF Cable (optical) Connect (11) port. Phone Jack Cable Connect (12) port. AV Cable Connect (13) port. S-Video Cable Connect (14) port. AC Power Cable Connect (19) port. RF Cable Connect (16) and (17) port. Connectors Audio Input Composite Video Input Composite Video Output S-Video Input Component Video Input Analog RGB Input HDMI Input Digital Video Input RCA Pin Jack RCA Pin Jack RCA Pin Jack Mini Din 4 Pin RCA Pin Jack Mini D-Sub 15 Pin HDMI Connect DVI-D 24 Pin RS-232C Configurations 3-Wire (Non-standard) PC RXD TXD GND DTR DSR RTS CTS TV 3 2 5 4 6 7 8 TXD RXD GND DTR DSR RTS CTS · Cables connecting the PC vary according to the type of machine, so consult your product dealer. 2 3 5 4 6 7 8 12 OWNER'S MANUAL Viewing the Remote Control Button Description 1 2 3 4 Stand By Turn the TV on and off. Mute Temporarily cut the sound and restore it. Pre.CH Turn to the previous program or exit OSD. V.Size Choose the Screen Form. 16:9 4:3 Panorama Zoom1 Zoom2 5 6 7 8 Favorite Tune to your next favorite program. 100 Press to tune the channels over 100. INPUT Display the input source list. Menu/Set Display the main OSD menu. Activate your choice in the OSD menu. 9 Exit/EPG Return to the previous OSD menu. 10 Sub CH Change channels of the sub window by pressing the Sub CH button and CH+/- Button after pressing this button in PIP. 11 CH +/Move to the upper or lower channel. 12 VOL / Increase or decrease the volume level. EPG (Electronic program guide) on Remote (HDTV mode only) : Perform the function showing channel information. (Title, Time slot) OWNER'S MANUAL 13 Viewing the Remote Control 1 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono Stereo SAP · You can select only available modes depending on the source. 2 INFO Display the current information about time, screen form, source and MTS mode. 3 PICTURE There are 4 picture modes. Standard Vivid Mild User 4 STILL Temporarily freeze the screen and restore it. 5 SOUND Choose the sound equalizer settings. Standard Movie Music News User 6 SLEEP Set the preset time interval for automatic turn - off. OFF (Not work) 10min. 20 30 60 90 120 150 180 7 TIME Display the current time on the screen. 8 DIGEST/DTV INFO Display 16 TV programs at the same time. 9 CH ADD Add the current channel to memory. 10 CH ERASE Erase the current channel to memory. PIP (Picture in Picture) Buttons 13 MODE (On/Off) Activate PIP function and change the PIP window size and PIP mode. Small Large Twin (Half) OFF 14 SOURCE Change the PIP window source. 15 SWAP Swap the main screen and the PIP window. 16 MOVE Move the position of the PIP window. 11 CC (CLOSED CAPTION) Set the close caption. Off Caption CC1 Caption CC2 Caption Text1 Caption Text2 12 V-CHIP Get into V-Chip menu. DTV Info (HDTV mode only) : Perform the function showing current channel information. (Title, Time slot, Closed caption, Dolby) 14 OWNER'S MANUAL Viewing the Remote Control MOVE button : Move the position of PIP window. Left Up Right Up Left Down Right Down (Start) SWAP button : Swap the sources of the main screen and PIP window. MODE button : Change the PIP window mode. OFF Small Large Twin Small Large Twin SOURCE button : Change the source of the PIP window. The available sources are shown as below. PIP TV HDTV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI Main TV ­ HDTV ­ VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 ­ PC DVI HDMI ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ OWNER'S MANUAL 15 Controls of the Remote Control Loading the Batteries 1 2 3 Press on the cover and slide in the direction of the arrow. Load two AAA batteries, taking care that the + and - ends face the correct direction. Close the cover until it clicks. Reception Range of Remote Control SOURCE /SELECT MENU - VOL + MOVE (HP-XXXXV) (HP-XXXXVP) Left 5m (Front) Right Left 5m (Front) Right Upper Lower 16 OWNER'S MANUAL Installation Table Stand Installation (optional) 4 inch(10.16cm) 4 inch (10.16cm) 4 inch (10.16cm) 2.36 inch (5.99cm) 1.18 inch(Min) 3cm < The TV can be installed on the desk as shown above. > · Table stand mount minimum allowable clearances for adequate ventilation. Installation (HP-XXXXV) (HP-XXXXVP) 20 OWNER'S MANUAL 17 Installation Wall Mount Installation (optional) < The TV can be installed on the wall as the picture above. > 4 inch(10.16cm) 1.18 inch(Min) 3cm 4 inch (10.16cm) 4 inch (10.16cm) 2.36 inch (5.99cm) ` · Install this TV a only in a location where adequate ventilation is available. 18 OWNER'S MANUAL Installation Speaker Installation (optional) (HP-XXXXV Only) To Main Unit To Speaker Wire Saddle Wire Saddle SPEAKER (8) Ferrite Core SPEAKER (8) * CAUTION : Please make sure speaker wires should be connected as above, ferrite core are to be nearer to the main unit not to speakers to avoid possible electromagnetic-interference. · Be sure TV power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the TV and speaker. Be sure to connect the positive " + " wire to the " + " input and the negative " - " wire to the " - " input. Connect left TV input to left speaker and right TV input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders provided. (Caution: Once installed, the speaker wire holders lock into position and can't be removed.) · Always lift the TV itself (not the speakers) when handling or moving the TV after speakers have been installed. Speaker Accessories 4 - Iron Plates (Mount speakers to TV) 16 - 4 x 10 Long Bolts (Attach iron plates to speakers) 2 - Speaker Wires 2 - Speaker Wire Holders (For arranging the speaker wires) OWNER'S MANUAL 19 Connecting the TV Cable A-TV Antenna Cable D-TV Antenna Cable (HP-XXXXV) A-TV Antenna Cable D-TV Antenna Cable (HP-XXXXVP) Connection the TV Cable 1 Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and select TV or HDTV on OSD. 2 Use CH+/CH- button or numeric button to change TV program for your program selection. 3 Press Pre. CH button on the remote control to tune the previous program. 4 Also, you can tune to cable service provided programs using the cable box. For further information regarding cable TV service, contact cable TV service provider(s). 20 OWNER'S MANUAL Connecting the VCR (HP-XXXXV) AV3 Input SOUND of S-VIDEO/AV AV Output AV1 Input AV2 Input S-VIDEO (HP-XXXXVP) AV3 Input SOUND of S-VIDEO/AV AV Output AV1 Input AV2 Input S-VIDEO Connecting the VCR Connect a S-Video cable to the S-Video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the TV. Connect a composite cable to the AV video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the TV. With S-Video With AV Input Watching VCR 1 2 Press INPUT button on the remote control and select video sources. Insert a video tape into the VCR and press the PLAY button on the VCR. · To avoid picture noise (interference), leave an adequate distance (over 3m) between the VCR and TV. · When connecting the TV with external equipment, match the color of connecting ports (e.g. Video -Yellow, Audio (L) -White, Audio (R) - Red). · If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/Mono) input of the TV. · If you connect an S-VHS VCR to the S-VIDEO input socket, you can get a better picture quality than normal video input (AV). · Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR 4:3 picture format or if a program information is present. OWNER'S MANUAL 21 Connecting the DVD Connecting the DVD · Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the component jacks on the TV. · Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the component jacks on the TV. · Connect the HDMI cables to the DVD player's and to the HDMI cables on the TV. COMPONENT1 & SOUND HDMI COMPONENT2 & SOUND (HP-XXXXV) COMPONENT1 & SOUND HDMI COMPONENT2 & SOUND (HP-XXXXVP) 22 OWNER'S MANUAL Connecting the DVD How to Use 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the TV and select HDMI, COMPONENT1 or COMPONENT2. 480i/60Hz 480p/60Hz 576i/50Hz 576p/50Hz 720p/50Hz 720p/60Hz 1080i/50Hz 1080i/60Hz Supported Signals COMPONENT1 COMPONENT2 PC ­ ­ DVI ­ ­ HDMI ­ ­ Component Input Ports You can get better picture quality if you connect DVD player with component input sockets as below. Component ports of the TV Y Y Y Y Y PB Pb B-Y Cb PB PR Pr R-Y Cr PR Video output ports of DVD player Normal DVD source is based on 480i, which should be through normal Y Pb Pr of component signal. It may occur screen noise, blank screen in case of using HDMI Cable unauthorized by ATC. It may easily occur as specially HD signal(720p or 1080i) input. Suggest HDMI Cable only authorized by ATC. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - "Multimedia interface" is a more accurate name for it especially because it allows Not Only Digital video but also digital audio.The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio. - Use the HDMI/DVI terminal for DVI connection to an extended device. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection. - HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (set top boxes, DVD players, AV receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection. OWNER'S MANUAL 23 Connecting the Set Top Box How to Connect Connect set top box video inputs to AV, COMPONENT, HDMI, PC or DVI jacks on the TV. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs... (HP-XXXXV) (HP-XXXXVP) How to Use 1 2 Turn on the set top box. Press INPUT button on the remote control of the TV and select COMPONENT1, COMPONENT2, HDMI, PC or DVI. 480i/60Hz 480p/60Hz 576i/50Hz 576p/50Hz 720p/50Hz 720p/60Hz 1080i/50Hz 1080i/60Hz Supported Signals COMPONENT1 COMPONENT2 PC ­ ­ DVI ­ ­ HDMI ­ ­ How to Connect With AV Connect a AV cable to the AV jacks of the STB (set top box) and the TV. With Component With HDMI Connect a three separate component cables to the component jacks of the STB and the TV. Connect L (White) and R (Red) sound cables (Composite) to the sound jacks of the STB and the TV. Connect a HDMI cable to the HDMI jacks of the STB and the TV. With RGB or DVI Connect a D-Sub or DVI cable to the AV video jacks of the STB and the TV. Connect L (White) and R (Red) sound cables (Composite) to the sound jacks of the STB and the TV. 24 OWNER'S MANUAL Connecting the PC ( D-Sub & DVI ) D-Sub 15pin (VGA) from PC DVI from PC (HP-XXXXV) D-Sub 15pin (VGA) from PC DVI from PC (HP-XXXXVP) Connecting a PC to the TV Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the TV. Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding Data (DDC) Horizontal sync. Vertical sync. Clock (DDC) Pin Configuration 15pin signal cable (based on protruded pin). To watch the PC screen 1 Turn on the TV and press INPUT button to select the PC mode. 2 Turn on the PC and check for the PC requirement. 3 Adjust the PC screen in Position menu. (See 38 page.) OWNER'S MANUAL 25 Displayable TV Specification Resolution 720 x 400 Horizontal Frequency (KHz) 31.469 37.927 31.469 35.000 37.861 640 x 480 37.500 43.269 45.913 53.011 35.156 37.879 48.077 800 x 600 46.875 53.674 56.000 64.016 832 x 624 49.725 48.363 1024 x 768 56.476 60.023 68.677 1152 x 864 1280 x 1024 67.50 64.00 Vertical Frequency (Hz) 70.08 85.03 59.94 66.66 72.80 75.00 85.00 90.03 100.04 56.25 60.31 72.18 75.00 85.06 90.00 100.00 74.55 60.00 70.06 75.029 84.997 75.00 60.00 · Synchronization input form : separate · The TV recognizes 640 x 480 @60Hz signal as 480p DTV signal. So the signal is expanded, please try other signals like 640 x 480 @75Hz. · The TV operates abnormally if a non-standard video format is selected. · Depending on the manufacturer, your PC screen might appear differently (and depending on your particular version of windows). Check your PC instruction book for information about connecting your PC to the TV . · The TV may operate abnormally if a non-standard video signal inputs. · "Not Support" message box will appear when an over-spec video signal is inputted. Change the video settings of PC when the message is displayed. 26 OWNER'S MANUAL Basic Operation Turning the TV On/Off Press the Power button on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power button on the front panel.