User manual ELECTROLUX EW1277F

LAVADORA WASHING MACHINE MÁQUINA DE LAVAR ROUPA M A N UA L D E U S O I N S T RU C T I O N B O O K L E T M A N UA L D E U T I L I Z A Ç Ã O EW 1277 F EW 1677 F E GB 132 999 730 P Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. The symbols you will see on some paragraphs of this booklet have the following meaning: The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. The information marked with this symbol provides additional instructions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the machine are marked with this symbol. Our contribution to the protection of the environment: we use recycled paper. 26 Contents Warnings Disposal 28-29 29 Maintenance Bodywork Detergent dispenser drawer Drain filter Water inlet filter Emergency emptying out Frost precautions 46 46 46 46 47 47 46 Tips for environmental protection 29 Technical specifications Installation Unpacking Positioning Water inlet Water drainage Electrical connection 30 31 31 31 31 32 32 Something not working? 48-49 Your new washing machine Description of the appliance Door locked pilot light Detergent dispenser drawer 33 33 33 33 Use Control panel Controls Functions Programme information Washing hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives International wash code symbols Operating sequence Washing programmes Special programmes 34 34 34-37 37 38 39 39 39 39 39 39 39 40 41 42-43 44 45 27 ENGLISH Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation · All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. · Any electrical work required to install this appliance must be carried out by a qualified electrician. · Any plumbing work required to install this appliance must be carried out by a qualified plumber. · After having installed the machine, check that it is not standing on its electrical supply cable. · If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the feet and the floor. · Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells. · Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book. · Always unplug the appliance and shut the water tap after use. General safety · Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local Service Centre. · Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself. · During high temperature wash programmes the door glass may get hot. Do not touch it! Use · This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. · Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. · Do not overload the appliance. Follow the instructions in the instruction book. · Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage. · Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance. · Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub. · Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry. 28 Child safety · Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance. · The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children's reach. · Keep all detergents in a safe place out of children's reach. · Make sure that children or pets do not climb into the drum. Disposal Packaging materials The materials marked with the symbol recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. are Machine Use authorised disposal sites for your old appliance. Help to keep your country tidy! Tips for environmental protection To save water, energy and to help protect the environment, we recommend that you follow these tips: · Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). · The machine works more economically if it is fully loaded. · With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature, so saving energy. · Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed. 29 ENGLISH · When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing. Technical specifications DIMENSIONS Height Width Depth Cotton Synthetics Delicates Woollens 85 cm 60 cm 58 cm 5.5 kg 2.5 kg 2.5 kg 2 kg 1200 rpm max. (EW 1277F) 1600 rpm max. (EW 1677F) 220-230 V/50 Hz 2200 W 10 A 50 kPa 800 kPa MAXIMUM LOAD SPIN SPEED POWER SUPPLY VOLTAGE/FREQUENCY TOTAL POWER ABSORBED MINIMUM FUSE PROTECTION WATER PRESSURE Minimum Maximum This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 89/336/EEC of 03/05/89 relating to electromagnetic compatibility. 30 Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. P1051 P0255 Water inlet Connect the water inlet hose to a tap with a 3/4" thread. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. 2. Remove the polystyrene block from the bottom of the machine and release the two plastic bags. 3. Carefully remove the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine. 2 P1068 P1066 1 4. Set the machine upright and remove the two remaining bolts from the back. 5. Pull out the three plastic spacers from the holes into which the bolts were fitted. 6. Plug all the holes with the plugs which you will find at the back of the appliance or in the envelope containing the user manual. P1088 P0021 The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. P0256 P0020 31 ENGLISH Water drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall. Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. Please ensure that when the appliance is installed the power supply cable is easily accessible. P0022 In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked. Run it along the floor; only the part near the drainage point must be raised. P0023 32 Your new washing machine This new washing machine, which is fitted with the Direct Spray system, patented Electrolux, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water and electricity consumption is proportional to the quantity and type of laundry being washed. · The programme progress display shows the programme steps selected and the programme phase which is running. · The special wool programme with its new delicate wash system treats your woollens with extreme care. · The balance control device ensures the machine is stable during the spin. Description of the appliance 1 Detergent dispenser drawer 2 Programme chart 3 Control panel 4 Door locked pilot light 5 Drain filter 6 Adjustable feet 4 5 2 120 900 70 50 1 3 EW 1277 F 6 Door locked pilot light It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 38). 7 Detergent dispenser drawer Prewash Main wash Fabric softener, starch Bleaching agent P0909 Cl 33 ENGLISH · The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme. Use Control panel 1200 900 700 500 EW 1277 F 1 23 4 5 6 7 8 9 10 11 13 14 12 1 Programme chart A programme chart in Spanish is supplied with the user manual. Position E corresponds to the ENERGY SAVING programme and position to "cold wash". At the end of the programme the selector dial must be turned to position O. 2 Mains-on light This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again. Programme Option buttons Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the pilot lights flash for about 2 seconds and the message Err is displayed. 3 ON/OFF button Press this button to switch the machine on. Press it again to switch the machine off. 4 Programme selector dial The selector is divided into 5 sections: · Cotton, linen (light blue section) · Synthetics (yellow section) · Delicates (black section) · Woollens (hand washing) (black section) · Special programmes A....G · Reset programme O 95° E° 60 5 Prewash button The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for Cotton and Synthetics, and with emptying of the water for Delicates. This option is not available with the wool programme. For use when washing heavily soiled laundry. 6 Spin speed button Press this button to reduce the maximum speed of the final spin proposed by the machine for the selected programme or to select position (no spin). The light corresponding to the selected option illuminates. Spin speed The following speeds are available for the different fabrics: 40° E 40 60 °° GF D C BA ° 60 30° 30 40 °° The selector dial can be turned either clockwise or anticlockwise. 30 40° ° 30 ° 40 40 °° E EW 1277 F · Cotton, linen: 500/700/900 max 1200 r.p.m. 34 · Synthetics, wool: 500/700 max 900 r.p.m. · Delicates: 500 max 700 r.p.m. EW 1677 F · Cotton, linen: 500/700/1000 max 1600 r.p.m. · Synthetics, wool: 500/700 max 1000 r.p.m. · Delicates: 500 max 700 r.p.m. No spin By selecting this option the spinning phases are suppressed. This function is not available for cotton and linen. To be selected for extremely delicate items. This option is not available with the wool programme and the Energy saving programme. To be used for lightly soiled laundry. 9 Extra rinse button Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents and in areas where the water is very soft. 10 "Bio" button This function can be selected for cotton and synthetics with a washing temperature of 40 or more degrees. The machine will maintain a temperature of 40° for about 10 minutes to enable the enzymes contained in the detergent to eliminate the dirt. To be used for laundry with "stubborn" stains. 7 Anti-crease button When this button is pressed, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light of the START/PAUSE button flashes and the phase light is alight to indicate that the water must be emptied out. To empty out water there are 3 possibilities: · Select programme "D" (draining): The water is emptied out without spinning. Attention! Before selecting programme "D" the selector dial has to be positioned on O (cancelling). · Depress START/PAUSE button : after emptying, the machine performs the spin cycle corresponding to the type of fabric previously selected. · Select the spin speed by means of the relevant button and then depress the START/PAUSE button. 11 DELAY START button The wash programme can be delayed from 1 hour up to a maximum of 24 hours by means of this button. Selecting the delayed start · Switch the machine on by depressing the ON/OFF button . · Select the programme and the required options. · Select the delay start. · Depress START/PAUSE button starts its hourly countdown. : the machine The programme will start after the selected delay has expired. Altering the delayed start · Depress START/PAUSE button . 8 Quick wash button By pressing this button the washing time is reduced as follows: · 52 minutes for cotton 95°C · 23 minutes for cotton 60°C · 72 minutes for cotton 40°C and 30°C · 24 minutes for synthetics · 8 minutes for delicates · Depress DELAY START button until the required time is displayed. If you wish to cancel the delay, depress the button only once: the symbol 0 h is displayed. · Depress START/PAUSE button again. 35 ENGLISH 12 DISPLAY The display shows the following information: Cancelling - Duration of the programme Delayed start - Incorrect option selection - Alarm code - End of programme. Cancelling If a programme has been cancelled - programme selector dial on position O - three flashing dashes appear on the display. The countdown is updated every hour. Incorrect option selection If an option which is not compatible with the set wash programme is selected, the message Err is displayed for 2 seconds. --- Now you can select a new programme. Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes ( for example 2.05). Alarm codes In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph "Something not working"). 2.05 The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute. Delayed start The selected delay (24 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed. E20 End of programme When the programme has finished a flashing zero is displayed. 36 If you have selected the Anti-crease option zero will not flash. , the Prewash Main wash Rinses 13 START/PAUSE button Stop with water in the tub Drain Clogged filter End Spin The END pilot light flashes in the event of operating problems. At the same time one of the following lights starts to flash and an alarm code appears on the display. E10 + This button has three functions: Start - Pause - Draining of water. Start After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing. If you have selected the delayed start, the machine begins its countdown. The duration of the programme or the delay appears on the display. Pause To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts start to flash. To restart the programme from the point at which it was interrupted, press the START/PAUSE button again. Draining of water By depressing the Start/Pause button · The water of programme "A" (Soak) is emptied out · The water of the last rinse on programmes with Anti-crease option is emptied out and the laundry is spun. E20 + E40 + = the machine does not fill = the machine does not empty = the door has not been closed To eliminate the problem, see paragraph "Something not working". If at the end of the programme the pilot light flashes this means that the drain filter must be cleaned. Functions End of programme When the door locked light has gone out, the door can be opened. The light (END) on the programme progress display illuminates. A flashing zero appears on the display. Switch the machine off and remove the laundry. Turn the programme selector dial to O. Altering a programme You can alter the programme before it starts. When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme. Start it by depressing the START/PAUSE button. Interrupting a programme Depress the START/PAUSE button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme. 14 Programme progress display By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on. When the programme has finished, the End pilot light comes on. Cancelling a programme Turn the selector dial to O to cancel a programme which is running: three flashing dashes appear on the display. Now you can select a new programme. 37 ENGLISH Opening the door after the programme has started First set the machine to PAUSE by pressing the START/PAUSE button. The door can be opened when the door locked light has gone out. If the door does not open, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. If you cannot open the door but you need to open it you have to switch the machine off by depressing the ON/OFF button . After about 3 minutes the door can be opened (pay attention to the water level and temperature!). To restart the programme depress ON/OFF button again after closing the door. B = Rinses With this programme it is possible to rinse and spin garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at the max. speed. The spin speed can be reduced by depressing button . C = Softeners Hand washed garments can be softened with this programme. The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by depressing button . D = Drain For emptying out the water of the last rinse in programmes with the Anti-crease option. Turn first the programme selector dial to O, then select programme "D" and depress the START/PAUSE button. F = Spin Separate spin at the maximum speed for hand washed garments. You can reduce the speed by means of button to adapt it to the fabrics to be spun. G = Short programme This is a complete programme that can be combined with the following options: spin speed reduction, no spin, anti-crease and delayed start. To be used for laundry which is lightly soiled or which needs freshening up. Max load 2.5 kg. Washing temperature 30°C Programme duration 30 minutes Final spin speed 700 r.p.m. O = Cancelling To reset a programme turn the selector dial to O. Now can a new programme be selected. Programme information Wool Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the "hand washing" care symbol. A = Soak Select this programme for heavily soiled laundry. Pour the detergent into the compartment . This programme is not suitable for wool. The machine performs a soak at 30°C and stops with the water in the drum. The water can be emptied out in 2 ways: · Draining only by depressing the START/PAUSE button. · Draining and spin: turn the programme selector dial to O, select programme "F" (spin), reduce eventually the spin speed by means of button and depress START/PAUSE button. Important! · If the water is not emptied out within 18 hours, the machine empties automatically. · At the end of the soak (after having emptied out the water) you can select the washing programme. Turn first the programme selector dial to O, then select the programme and depress the START/PAUSE button. 38 Washing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer's washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Laundry weights The following weights are indicative: bathrobe napkin quilt cover sheet pillow case tablecloth towelling towel tea cloth night dress ladies' briefs man's work shirt man's shirt man's pyjamas blouse men's underpants 1200 g 100 g 500 g 200 g 250 g 200 g 100 g 200 g 100 g 600 g 200 g 500 g 100 g 100 g 700 g Temperatures 90°/95° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear). (cold)for delicate items (e.g. net curtains), mixed 30°-40° laundry including synthetic fibres and woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their "whiteness" in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Treat curtains with special care. Remove hooks or tie them up in a bag or net. Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain. Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. 39 Maximum loads Recommended loads are indicated in the programme charts. General rules: Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full; Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size. ENGLISH Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk. Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. Water hardness is classified in so-called "degrees" of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. Follow the product manufacturers' instructions on quantities to use. Use less detergent if: ­ you are washing a small load, ­ the laundry is lightly soiled, ­ large amounts of foam form during washing. Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: ­ powder detergents for all types of fabric, ­ powder detergents for delicate fabrics (60°C max) and woollens, ­ liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. The bleaching agent (chlorine) can be used only for white or fast coloured cotton and linen items. Pour it into the compartment marked . Follow the product manufacturer's recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer. Degrees of water hardness Degrees Level Characteristic German °dH French °T.H. 1 2 3 4 soft medium hard very hard 0- 7 8-14 15-21 0-15 16-25 26-37 more than more than 21 37 40 International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash temperature 95°C Delicate wash Max. wash temperature 60°C Max. wash temperature 40°C Max. wash temperature 30°C 60 40 40 30 Hand wash Do not wash at all Bleaching Bleach in cold water Do not bleach Ironing Hot iron max 200°C Warm iron max 150°C Lukewarm iron max 110°C Do not iron Dry cleaning Dry cleaning in all solvents Dry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113 Dry cleaning in petrol, pure alcohol and R 113 Do not dry clean high temperature low temperature Drying Flat On the line On clothes hanger Tumble dry Do not tumble dry 41 ENGLISH 95 60 40 30 4. Switch the machine on Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. To switch the machine on, press the ON/OFF button : the mains-on light comes on. --0 If the programme selector dial is on the RESET O position, three flashing dashes will be displayed. If the programme selector dial is positioned on a wash programme, a flashing zero will be displayed. 1. Place the laundry in the drum Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. 5. Select the desired programme Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. P0004 40° E 40 60 °° 95° E° 60 GF Prewash D Main wash Rinses Stop with water in the tub Drain Spin Clogged filter End C BA 2. Measure out the detergent Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the appropriate compartment marked . ° 60 30° 30 40 °° The duration of the programme appears on the display. 3. Measure out the additives If required, pour fabric softener into the compartment marked , and bleach into the compartment marked without exceeding the «MAX» mark. 6. Select the spin speed or option Depress the spin speed button to choose the required speed or option : the corresponding light comes on. 1200 900 700 500 Cl P0910 P0911 42 30 40° ° 30° 40 40 °° E Cl 7. Select the required options The light corresponding to the depressed button illuminates. The pilot light corresponding to the wash phase which is running is on. The door light comes on to indicate that the door is locked. The machine starts operating. 10. At the end of the programme The machine stops automatically. If the anti-crease option has been selected, the light of the START/PAUSE button flashes and the light of the programme progress display is on to indicate that the water must be emptied out before opening the door. The display shows a zero. At the end of the programme (after draining) a flashing zero appears on the display. The door can only be opened after the door locked light has gone out. Release of the lock is also indicated by the coming on of the light . Turn the programme selector dial to Reset O. Switch the machine off by pressing the ON/OFF button . Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. 8. Select the DELAY START option To delay starting of a programme, press the DELAY START button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display. During this period it is possible to load other laundry: · depress START/PAUSE button; · load the laundry; · close the door and depress START/PAUSE button again. 9. Start the programme To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing. 43 ENGLISH If you have selected the delayed start the machine starts its countdown. The display shows the delay or the duration of the programme. Programme chart Washing programmes Consumption* Section Temp. Type of fabric Programme description Additional functions Max. load Energy kWh 1.9 Water lt. 47 Time min. 148 light blue 95° White cotton Wash at 95°C 3 rinses Normal spin Wash at 60°C 3 rinses Normal spin Wash at 30°40°C or cold wash 3 rinses Normal spin Wash at 30°-40°60°C or cold wash 3 rinses Delicate spin Wash at 30°40°C 3 rinses Delicate spin Wash at 30°40°C or cold wash 3 rinses Delicate spin 5.5 kg BIO 5.5 kg BIO 5.5 kg BIO light blue 60° ** Fast coloureds 0.95 44 130 light blue -30°- Non-fast 40° coloureds 0.85 44 115 yellow -30°- Synthetics 40°-60° 2.5 kg BIO 0.8 60 87 black 30°-40° Delicates 2.5 kg 0.5 53 64 black -30°- Wool 40° 2 kg 0.35 42 55 * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme and to a wash load of 5 kg for cotton. ** In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the 60°C wash programme for cotton with a wash load of 5 kg. ECONOMY PROGRAMMES For slightly/normally soiled cottons or synthetics you can use the relevant Economy programme: you will obtain good washing results by saving energy (approx. 30%). 44 Programme chart Special programmes Selector dial Programme position A Soak Consumption* Programme description Additional functions Max. load Section blue Soak at 30°C stop with water in tub. To drain, depress START/PAUSE button . The machine automatically empties itself after 18 hours. 3 rinses with liquid additives if required Spin 1 rinse with softener Spin 5.5 kg 0.4 22 20 blue B Rinses 5.5 kg 0.15 37 57 blue C Softeners 5.5 kg - 16 23 blue blue blue D F G Drain Spin Wash at 30°C 2 rinses Spin at 700 r.p.m. For cancelling the wash programme which is running / 5.5 kg 2.5 kg 0.3 40 3 10 30 Short programme blue O Cancelling - - - * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry and on the ambient temperature. For cottons it refers to a wash load of 5 kg. 45 ENGLISH Energy kWh Water lt. Time min. Maintenance 1. Bodywork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 3. Drain filter The drain filter collects threads and small objects inadvertently left in the laundry. Check regularly that the filter is clean. Open the filter door. Place a container under the filter and unscrew it. 2. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits in the drawer. Clean the drawer from time to time by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner. To facilitate cleaning, the top part of the additive compartments can be removed. P0861 P0860 Pull out the filter. Clean the filter under a running tap, then refit it, screwing it fully in. Cl P0915 P0916 Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning. P0859 P0040 4. Water inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap and remove the filter. Clean the filter with a stiff brush. P0038 Screw the hose back onto the tap. P1090 46 5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: · pull out the plug from the power socket; · close the water tap; · if necessary, wait until the water has cooled down; · place a bowl on the floor; · put the drain hose end into the bowl and let the water come out. Should it not be possible to have access to the outlet hose because, for example, the appliance is built in the kitchen furniture, slightly loosen the outlet filter after placing a bowl on the floor, to let the water come out slowly. At the end screw the filter again. 6. Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: · Close the water tap and unscrew the water inlet hose from the tap. · Place the end of the drain hose and that of the inlet hose in a bowl placed on the floor. · Select programme "D" (draining) and run it until the machine stops. · Turn the programme selector dial to O. · Switch the machine OFF by depressing button · Screw the water inlet hose back on and put the drain hose back in its place. By doing this, any water remaining in the machine is removed, avoiding the formation of ice and, consequently, breakage of the affected parts. When you use the machine again, make sure that the ambient temperature is above 0°C. . 47 ENGLISH Something not working? Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display and at the same time the light , the light of the START/PAUSE button and one of the following lights start to flash: - E10 + : problem with the water supply - E20 + : problem with water draining - E40 + : door open Once the problem has been eliminated, press the START/PAUSE button all checks, the problem persists, contact your local Service Centre. to restart the programme. If after Problem · The machine does not start up: Possible cause · The door is not firmly closed. (E40) · The machine is not plugged in or there is no power at the socket. · The main fuse has blown. · The programme selector dial is not positioned correctly. · The START/PAUSE button has not been depressed. · The DELAY START option has been selected. · · · · The water tap is closed. (E10) The inlet hose is squashed or kinked. (E10) The filter in the inlet hose is blocked. (E10) The door is not properly closed. (E40) · The machine does not fill: · The machine fills then empties immediately: · The machine does not empty and/or does not spin: · There is water on the floor: · The end of the drain hose is too low. Refer to relevant paragraph in "water drainage" section. · The drain hose is squashed or kinked. (E20) · The option or has been selected. · The drain filter is clogged. (E20) · Too much detergent or unsuitable detergent (creates too much foam) has been used. · Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. · The drain hose is damaged. · Too little detergent or unsuitable detergent has been used. · Stubborn stains have not been treated prior to washing. · The correct temperature was not selected. · Excessive laundry load. · The transit bolts and packing have not been removed. · The support feet have not been adjusted. · The laundry is not evenly distributed in the drum. · Maybe there is very little laundry in the drum. · · · · 48 The programme is still running. The door lock has not yet released. The water level is above the bottom edge of the door. The machine is heating the water. · Unsatisfactory washing results: · The machine vibrates or is noisy: · The door will not open: Problem · Spinning starts late or the laundry is not spun enough: Possible cause · The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 6 minutes, the laundry is still not evenly distributed in the drum, the machine will spin at a lower speed. If at the end of the programme the laundry is not spun enough, redistribute the load manually and select the spin programme. Water is not visible in the machine. The machine, which is the result of modern technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. The machine makes an unusual noise. The machine is fitted with a commutator motor which improves machine performance. P1035UK