User manual EMERSON CEDV90DP

Owner's Manual Please read before using this equipment. DVD/CD Player with Video Cassette Recorder CEDV90DP Precautions EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. Table of Contents Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . Important Safeguards . . . . . . . . . . . . . . . . . . . Installation Location . . . . . . . . . . . . . . . . . . . . . Avoid the Hazards of Electrical Shock and Fire. Moisture Condensation Warning . . . . . . . . . . . . About Copyright . . . . . . . . . . . . . . . . . . . . . . . . Notice for progressive scan outputs . . . . . . . . . Symbol Used in This Manual . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........2 ........3 ........4 ........4 ........4 ........4 ........4 ........4 ........4 Setup About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5 Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tips for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6 Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8 VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Preparations for First Time Usage . . . . . . . . . . . . . . . . . . . . . 10 Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10 Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Supplied Accessory · Remote control · RF cable (NB109UD or NB159UD) (WPZ0901TM002) with two AA batteries VCR Functions Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recording & OTR (One Touch Recording) . . . . . Other Operations . . . . . . . . . . . . . . . . . . . . . . . . On-Screen Operations . . . . . . . . . . . . . . . . . . . . Recording Features . . . . . . . . . . . . . . . . . . . . . . Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . Tips for Timer Recording . . . . . . . . . . . . . . . . . . . Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . MTS System (Multi-Channel Television Sound) . Special Features . . . . . . . . . . . . . . . . . . . . . . . . . Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 11 12 12 12 13 13 13 14 14 15 16 16 17 17 17 18 18 19 19 20 20 21 21 22 22 23 24 24 25 · Audio/Video cables (WPZ0102TM015 or WPZ0102LTE01) · Owner's Manual (0VMN04086) Owner's Manual DVD Functions Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Track Search / Title/Chapter Search / Time Search . . . . . . . . . Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat / Random / Programmed Playback . . . . . . . . . . . . . . Repeat Playback / Repeat A-B Playback / Random Playback / Programmed Playback. . . . . . . . . . . . . . . . Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Subtitle Language / Audio Language / Camera Angle / Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To return the All Selections of SET UP (except for PARENTAL) to the Default Setting Troubleshooting Guide . Specifications . . . . . . . . Language List . . . . . . . . Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call Information TOLL FREE : 1-800-287-4871 Basic TV Connection Cable Signal Antenna or (Back of TV) Cable Signal Antenna (Back of DVD/VCR) or Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 (Back of TV) 1 Disconnect 2 Connect ANT-IN AC outlets Plug in From DVD/VCR From TV 4 ANT-OUT Connect RF Cable (supplied) 3 5 Please refer to "Connections" on page 5. Information DVD Functions VCR Functions Setup Precautions Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Precautions Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Make your contribution to the environment!!! · Used up batteries do not belong in the dust bin. · You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details. For Customer Use: Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future reference. Model No. _____________________ Serial No. _____________________ ­2­ EN Important Safeguards 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the video product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization - This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ANTENNA LEAD WIRE NEC ­ NATIONAL ELECTRICAL CODE S2898A 14. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 18. Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or damaged in any way. f. When the video product exhibits a distinct change in performance this indicates a need for service. 20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 22. Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. ­3­ EN Precautions Installation Location For safety and optimum performance of this unit: · Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. · Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Maintenance SERVICING ¡Please refer to relevant topics on the Troubleshooting Guide on page 23 before returning the product. ¡When this unit become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET ¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use alcohol, solvents or any other abrasive liquids and/or materials. CLEANING DISCS ¡When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. ¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS ¡If this unit still does not perform properly although you refer to the relevant sections and to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING ¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. ¡Always store the disc in its protective case when it is not used. AUTO HEAD CLEANING ¡Automatically cleans video heads as you insert or remove a cassette, so you can see a clearer picture. ¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your DVD/VCR may need to be cleaned. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on the front page to locate an Authorized Service Center. NOTES: ¡Remember to read the instructions included with the video head cleaner before use. ¡Clean video heads only when problems occur. Precautions Avoid the Hazards of Electrical Shock and Fire · Do not handle the power cord with wet hands. · Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug. · If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to an Authorized Service Center for Servicing. Call 1-800287-4871 to find out where the nearest Authorized Service Center is located. · Do not put your fingers or objects into the DVD/VCR cassette holder. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Notice for progressive scan outputs Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the `standard definition' output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of cable entry as practical. Symbol Used in This Manual The following symbols appear in some headings and notes in this manual. VCR DVD-V CD MP3 : Description refers to playback or recording of video cassette tapes. : Description refers to playback of DVD-Video discs. : Description refers to playback of Audio CDs. : Description refers to playback of MP3 files. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. EN ­4­ Setup About the Video Cassettes and Discs Playable Video Cassettes Use only cassettes marked with this DVD/VCR. Playable Discs Playable discs Mark (logo) Region code Recorded signals Disc size Disc types DVD-Video * 1,2,4,6 or DVD-R DVD-RW * 1,2,3,4,5,6 - Digital video (MPEG2) 12 cm or 8cm Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 DVD+R DVD+RW * 1,2,3,4,5,6 - Audio CD * 4,6 - Digital audio Example Digital audio or MP3 12 cm or 8cm CD-R CD-RW * 4,5,6 MP3 Example Track 1 Group 1 Track 3 Track 4 Group 2 Track 5 Track 6 Track 2 If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers. *3: Only the discs which have been recorded in the video format and finalized can be played back. Discs unfinalized or recorded in the video recording format cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may be not be smooth, etc.). *4: Scratched or stained discs may not be played back. *5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs. *6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised. Unplayable Discs ¡On the following discs, only the sound can be heard (picture cannot be viewed). CDV CD-G ¡NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM CD-I Photo CD DVD with region codes other than 1 or ALL DTS-CD DVD-ROM for personal computers CD-ROM for personal computers ¡On the following disc, the sound MAY NOT be heard. Super Audio CD Note: Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio CD layer cannot be delivered. ¡Any other discs without compatibility indications. Connections Please refer to "Basic TV Connection" on the front page before you use this unit. RF Output Channel If channel 3 is already occupied for broadcasting, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. Tips 3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit. · If "VCR" light does not appear on the display of this unit, press the VCR/TV button on the remote control. · The RF output channel may not change when you adjust 4) Press the PLAY button once. tracking during playback. In 5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds. this case, stop the playback, and start the playback again. · The RF output channel will change to channel 4 from channel 3 and you will see a playback picture. After that, press the PLAY In this case, "ch04" will appears on the front panel. button on the DVD/VCR for 3 · When a picture does not appear on the TV screen, repeat step [4]. seconds again. 6) Press the STOP button to stop playback. ­5­ EN Setup Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 Tips for Cable Box or Satellite Box Connection A Cable Signal (Cable box or Satellite box) IN OUT (Back of DVD/VCR) ANT-IN Connection B ANT-IN (Back of DVD/VCR) ANT-OUT ANT-OUT RF Cable (supplied) E Cable Signal (Cable box or Satellite box) IN OUT E (Back of TV) RF Cable (supplied) RF Cable (Back of TV) Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed on the DVD/VCR. You can view or record ONLY the channels you have selected on the cable box or the satellite box. · While you are recording, only the recorded channel can be viewed. To select channels of the cable box or satellite box 1) Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button.The "POWER" and "VCR" lights on the front panel will appear. Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of the cable b ox or satellite box). · If you use the channel 4, you need to change the DVD/VCR's RF output to channel 4. Refer to "RF Output Channel". 2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1). 3) At the cable box or satellite box, select the channel you want to view or record. Select this connection when you want to change channels on the DVD/VCR. With this connection, you may watch one channel while recording another. · You may not view or record a scrambled channel. To select channels of the cable box or satellite box 1) At the cable box or satellite box, select channel 3 or 4 (the same channel as the DVD/VCR's RF output channel.) · Refer to "RF Output Channel". 2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box. 3) Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button. The "POWER" and "VCR" lights on the front panel will appear. Then, select the channel you want to view or record. To play back a tape Follow the steps 1) to 2) above. Then, play back a tape. · Refer to "Playback" on page 11. To view one channel while recording another 1) While you are recording on the DVD/VCR, press the VCR/TV button so that the "VCR" light disappears on the DVD/VCR. 2) At the cable box or satellite box, select the channel you want to view. Setup Connection to an Audio System Method 1 Stereo system Analog audio input jacks AUDIO L R COAXIAL Method 2 Dolby Digital decoder, MD deck or DAT deck Digital audio input jack Audio cable (supplied) Audio Coaxial Digital cable (commercially available) DVD/VCR VCR AUDIO IN AUDIO OUT DVD/VCR (Analog) AUDIO OUT L L DIGITAL AUDIO OUT DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L COAXIAL CB/ PB R CR/ PR R VIDEO OUT R VIDEO IN or DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L COAXIAL CB/ PB R CR/ PR Note · If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set "DOLBY DIGITAL" to "ON" in the AUDIO menu. (Refer to pages 20-21.) · The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. · Unless connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "OFF" in the AUDIO menu. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 21.) · Set "DOLBY DIGITAL" to "OFF" in the AUDIO menu before connecting to an MD deck or DAT deck. (Refer to page 21.) · By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality 5.1ch Dolby Digital surround sound as heard in the movie theaters. ­6­ EN Connection to a TV Method 1 Basic Audio Good picture Method 2 Better picture Method 3 Best picture COMPONENT VIDEO IN TV AUDIO IN L R VIDEO IN S-VIDEO IN Y Y PB CB or PR CR Audio cable (supplied) Video cable (supplied) S-Video cable (commercially available) DVD/VCR DIGITAL AUDIO OUT DVD AUDIO OUT DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT DVD/VCR AUDIO OUT VCR AUDIO IN DVD/VCR AUDIO OUT VCR AUDIO IN L VCR AUDIO IN AUDIO OUT L ANT-IN DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Component Video cables (commercially available) L L L COAXIAL Y Y L COAXIAL CB/ PB R CR/ PR L L R VIDEO OUT R VIDEO IN R VIDEO OUT R ANT-OUT VIDEO IN VIDEO OUT VIDEO IN R CR/ PR DIGITAL AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L COAXIAL CB/ PB R CR/ PR or DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONEN VIDEO OUT VIDEO OUT S-VIDEO OUT L COAXIAL COMPONENT VIDEO OUT R (Analog) AUDIO OUT Note · Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. · When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jacks. · The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode. If your TV is compatible with progressive scanning 525p (480p) and you want to enjoy that high quality picture; You must select the connection Method 3 above and progressive scanning mode. To set the mode, press and hold the PLAY button on the front panel for more than 5 seconds, so that "P.SCAN" will appear on the display of this unit. (The progressive scanning is not available in the VCR mode.) [DVD/VCR] OUTPUT VCR DVD STOP PLAY If your TV is not compatible with progressive scanning; more than 5 seconds [Interlace mode] Use this unit in interlace mode. Make sure that no "P.SCAN" is on the display of this unit. If not, press and hold the PLAY button on this unit for more than 5 seconds, so that "P.SCAN" on the display of this unit will disappear. [Progressive scanning mode] Front & Rear Terminals DVD ANALOG AUDIO OUT jacks Connect the supplied audio cables here through the Audio In jacks of a television or other audio equipment. (DVD only) COAXIAL jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. (DVD only) S-VIDEO OUT jack Connect an optional S-Video cable here through the S-video in jack of a television. (DVD only) DVD/VCR AUDIO OUT jacks Connect the supplied audio cables here through the audio In jacks of a television or other audio equipment. DVD DVD/VCR COMPONENT VIDEO OUT AUDIO IN jacks Connect audio cables coming from the audio out jacks of a ANT IN jack camcorder, another VCR, or an Connect your antenna audio source here. or cable box here. ANT-IN VIDEO VCR AUDIO IN DIGITAL AUDIO S-VIDEO OUT AUDIO OUT OUT L COAXIAL AUDIO OUT POWER REW F.FWD STOP/EJE / Y DIGITAL AUDIO OUT L DVD AUDIO OUT S-VIDEO OUT L COMPONENT VIDEO OUT L -- AUDIO -- R DVD/VCR AUDIO OUT VCR AUDIO IN ANT-IN L L Y CB/ PB R CR/ PR R COAXIAL L CB/ RPB CR/ VIDEO IN PR R VIDEO OUT R VIDEO IN VIDEO OUT R ANT-OUT ANT-OUT [Back of DVD/VCR] DVD/VCR VIDEO OUT jack Connect the supplied yellow video cable here through the TV's video in jack. VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. [Front of DVD/VCR] ANT OUT jack Connect the supplied RF cable to the antenna input jack on your TV. COMPONENT VIDEO OUT jacks Connect optional component video cables here through the component video in jacks of a television. (DVD only) ­7­ EN Setup R R CB/ PB DVD AUDIO OUT About the Remote Control and Front Panel DVD mode VCR mode Remote Control Button Disc/Tape 2 5 8 0 3 6 9 +10 (Alphabetical order) 1 4 7 DVD-V CD MP3 VCR · To select channel. · The +10 button has no effect in VCR mode. · To select chapter or title directly. · To select track directly. · To search forward/backward through a disc. · To search forward/backward · To begin slow forward/reverse through a disc. playback during the pause mode. POWER SPEED AUDIO OPEN/CLOSE /EJECT 1 4 7 2 5 8 0 3 SKIP/CH. · To forward/backward a tape. · To select an item on the VCR Menu. · To advance to the next VCR Menu. · To go back one step during clock and timer setting. 6 VCR/TV 9 SLOW ENTER +10 DVD PAUSE · To move the cursor and determine its position. · To repeat between your chosen point A and B. · To select camera angles on a disc. · To move the cursor and determine its position. · To repeat between your chosen point A and B. (CD) DISPLAY VCR A-B PLAY ANGLE STOP REC/OTR AUDIO ENTER TOP MENU ZOOM SEARCH MODE MENU SETUP MODE · To select audio languages on · To select STEREO, a disc. L-CH or R-CH. (CD) · To clear the markers. · To clear the numbers entered incorrectly. · To display the current disc mode. · To clear the markers. (CD) · To remove status No. in program input. · To clear the numbers entered incorrectly. · To display the current disc mode. · To exit the VCR Menu. · To reset the tape counter. · To display the current time, tape counter, and channel. RETURN CLEAR/ C. RESET CLEAR/ C. RESET Setup SUBTITLE T-SET ANGLE REPEAT A-B DISPLAY DVD · To select the DVD output · To select the DVD output mode. mode. · To activate the remote control · To activate the remote control in DVD mode. in DVD mode. · To call up the Menu on a disc. · To call up the MP3 menu. (MP3) · To call up the VCR Menu. MENU MODE · To arrange the playing · To set black level on/off. · To set virtual surround on/off. order or play randomly. · To set virtual surround on/off. · To open or close the disc tray. · To pause disc playback. · To advance playback one frame at a time. · To begin disc playback. · To turn the unit on or off. · To open or close the disc tray. · To pause disc playback. · To begin disc playback. · To turn the unit on or off. · To eject the video cassette from the VCR. · To pause tape playback or recording. · To advance playback one frame at a time. · To begin tape playback. · To turn the unit on or off. · To start a recording. Installing the Batteries for the Remote Control Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. OPEN/CLOSE /EJECT PAUSE PLAY POWER 1 REC/OTR REPEAT 2 RETURN SEARCH MODE · To play a track or disc repeatedly. (CD) · To play a chapter or title · To play a track, group or disc repeatedly. repeatedly. (MP3) · To return to the previous · To return to the previous operation on the DVD setup operation on the DVD setup menu. menu. · To search track. · To search chapter, title or time. · To search time. (CD) · To call up the index or time · To rapidly return to · To rapidly return to search menu. a location of disc. a location on the disc. · Search the markers. · Search the markers. (CD) · To call up the DVD setup menu. · To call up the DVD setup menu. · To skip tracks. · To change channels. · To adjust the tracking manually during playback. · To view the tape in slow motion. · To select the recording speed. 3 SETUP SKIP/CH. SKIP/CH. · To skip chapters. SLOW Keep in mind the following when using the remote control: · Make sure that there is no obstacle between the remote and the remote sensor on the unit. · Use within the operating range and angle, as shown. SPEED STOP SUBTITLE T-SET · To stop playback. · To select subtitles on a disc. · To call up the Top Menu on a disc. · To stop playback. · To stop playback or recording. · To put the VCR into standby mode for a timer recording. TOP MENU t ou ab ) in t (7m ith W 3 fee 2 Remote control · To return to the top file of the highest hierarchy in the program and MP3 menu. (MP3) · To select the VCR output mode. · To activate the remote control in VCR mode. VCR VCR/TV · To select DVD position or TV position. · To magnify part of a picture. (x2/x4) · To select CD/MP3 position or TV position. · To select VCR position or TV position. ZOOM ­8­ EN Front Panel Display DVD-V CD MP3 Lights up when the A-B repeat function is on. Displays a type of the disc which is inserted on the tray. · DVD: DVD disc · CD: Audio CD, MP3 Lights up when the progressive scan system is activated. Lights up when the repeat function is on. OPEN/CLOSE OUTPUT POWER REW F.FWD STOP/EJECT / VCR PLAY REC/OTR CHANNEL DVD STOP PLAY VIDEO L -- AUDIO -- R GROUP DVD P.SCAN DVD CD Lights up when the ALL repeat function is on. Lights up when the inserted disc comes to a pause. Displays how long the current title or track has been played back. When a chapter or track is switched, the number of a new title, chapter or track is displayed. Lights up when the inserted disc is being played back. VCR Opening the tray Closing the tray Loading the disc When a disc or tape is being played back Lights up when a tape is in the DVD/VCR. Lights up during playback when the repeat function is on. Lights up when the DVD/VCR is in VCR position. This light does not appear when the DVD/VCR is in TV position. VCR Lights up when the timer recording or an OTR recording has been set. Lights up during a recording. Flashes when a recording is paused. REC PM Lights up when the playback is in still or slow mode. Lights up when current time is P.M. Works as a tape counter(hour,minute,second). Also displays a channel number, tape speed, remaining time for OTR or current time. Lights up when the inserted cassette is being played back. VCR/DVD Switching Because this product is a combination of a VCR and a DVD player, you must select first which component you wish to operate with the OUTPUT button. VCR MODE OPEN/CLOSE Press the VCR button on the remote control. (Verify that the VCR OUTPUT light is lit.) POWER OUTPUT POWER REW F.FWD STOP/EJECT / SPEED AUDIO OPEN/CLOSE /EJECT VCR PLAY REC/OTR CHANNEL DVD STOP PLAY VIDEO L -- AUDIO -- R DVD 1 4 2 5 8 0 3 SKIP/CH. 6 VCR/TV