User manual EMERSON CR202EM8

TM INTRODUCTION EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. 20" Digital / Analog Television Owner's Manual CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION CR202EM8 TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-256-2487, OR VISIT OUR WEB SITE AT http://www.EmersonAudioVideo.com © 2007 Funai Electric Co., Ltd. INTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. Important Safeguards 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5. CLEANING - Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. ATTACHMENTS - Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. PORTABLE CART WARNING 8. ACCESSORIES - Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow S3126A the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. SYMBOLE D'AVERTISSEMENT POUR AMEUBLES - Cet appareil ne doit être LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l'installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l'utilisation d'une force excessive et des surfaces S3126A irrégulières risquent de déstabiliser l'ensemble et de le renverser. 9. VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. POWER SOURCES - This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION - This TV is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SEC TION 810-20) ELEC TRIC SERVICE EQUIPMENT GROUNDING CONDUC TORS (NEC SEC TION 810-21) GROUND CLAMPS NEC - NATIONAL ELEC TRICAL CODE POWER SERVICE GROUNDING ELEC TRODE SYSTEM (NEC ART 250, PART H) S2898A 14. LIGHTNING - For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 2 EN INTRODUCTION 15. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 18. SERVICING - Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this indicates a need for service. 20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. SAFETY CHECK - Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. HEAT - This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. CONNECTION INITIAL SETTING Precautions WATCHING TV CAUTION: ATTENTION: FCC WARNING TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. OPTIONAL SETTING RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. TROUBLESHOOTING This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. INFORMATION Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 3 EN INTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: · Shield it from direct sunlight and keep it away from sources of intense heat. · Avoid dusty or humid places. · Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. · Install the unit in a horizontal position. · Avoid locations subject to strong vibration. · Do not place the unit near strong magnetic fields. · Avoid moving the unit to locations where temperature differences are extreme. · Be sure to unplug the AC power cord from the outlet before carrying the unit. TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE · Do not handle the power cord with wet hands. · Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug. · If, by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. · Do not place anything directly on top of the unit. The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. date of purchase dealer purchase from dealer phone No. model No. serial No. dealer address Note about recycling: This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Supplied Accessories owner's manual (1EMN22400) remote control (NE601UE) POWER DTV TV / AUDIO INFO 1 4 7 ­/ENT 2 5 8 0 3 6 9 +100 CHANNEL RETURN CH VOL CH VOL MENU INPUT SELECT SLEEP MUTE * Batteries (AA x 2) for remote control not included. · If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. · Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items. Symbols Used in this Manual The following is the description for the symbols used in this manual. Description refers to: DTV : Digital TV operation TV : Analog TV operation · If neither symbol appears under the function heading, operation is applicable to both. 4 EN INTRODUCTION Features · DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. · Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen. · Auto Channel Scan - This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures. · V-chip - This feature allows you to block children's access to inappropriate programs. · Closed Caption Decoder - Built-in closed caption decoder displays text for closed caption supported programming. · Auto Shut Off Function - If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically. · Sleep Timer - This feature will automatically turned off the power of the unit at a specific time. · Choices for On-screen Language - Select your on-screen language: English, Spanish or French. · Stereo Sound Function · PLL Frequency Synthesized Tuning - Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control. · S-video Input · AV Input · Digital Audio Coaxial Output Contents INTRODUCTION Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CONNECTION CONNECTION Basic Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 INITIAL SETTING INITIAL SETTING Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 WATCHING TV WATCHING TV Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Volume Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Switching Each Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Screen Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 OPTIONAL SETTING OPTIONAL SETTING Channel Add/Delete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 DTV Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 DTVCC Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V-chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 TROUBLESHOOTING TROUBLESHOOTING Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 INFORMATION Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Electrical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back cover INFORMATION © 2007 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes. with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. 5 EN INTRODUCTION Remote Control Function 1. POWER DTV TV / 2. 7 8 9 1 AUDIO INFO 1 2 5 8 0 3 6 9 +100 CHANNEL RETURN 2 4 7 ­/ENT 10 VOL 3 4 5 MENU CH VOL CH 3. 11 6 INPUT SELECT SLEEP MUTE 12 4. 5. 6. POWER button (p10) Press to turn the unit on and off. Number buttons (p12) · Press to select channels. -/ENT button · Press to shift the minor channel from the major channel. +100 button · Press to select 100 or higher channels. (CATV) · Press to search if there are minor channels on the currently selected major channel. (DTV) CH K / L buttons (p12) Press to select channels and the external input mode or move up/down through the main menu items. VOL X / Y buttons (p12) Press to adjust the volume or move right(X)/left(Y) through the main menu items. MENU button (p10) Press to display the main menu. INPUT SELECT button (p13) Press to access a connected external device like a DVD player or a VCR. DTV/TV button (p13) Press to switch between the digital mode (DTV) and analog mode (TV). 8. INFO button (p13) Digital Mode (DTV) · Press to display the channel number and the program information. Analog Mode (TV) · Press to display the channel number. External Input Mode · Press to display the currently selected external input mode. 9. AUDIO button (p13) Digital Mode (DTV only) Press to select the audio language. 10. CHANNEL RETURN button (p12) Press to return to previous channel. 11. MUTE button (p12) Press to turn the sound on and off. 12. SLEEP button (p14) Press to activate the sleep timer. 7. Installing the Batteries Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control. 1 2 3 Battery Precautions: · Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries; they can overheat and rupture. 6 EN INTRODUCTION Control Panel 1. Infrared Sensor Window Receives infrared rays transmitted from the remote control. POWER button (p10) Press to turn the unit on and off. CHANNEL K / L buttons (p12) Press to select channels or move up/down through the main menu items. VOLUME X / Y buttons (p12) Press to adjust the volume or move right(X)/left(Y) through the main menu items. MENU button (p10) Press to display the main menu. HEADPHONE jack Headphone connection for personal listening. AUDIO input jacks (p9) RCA audio cable connection for an external device. VIDEO input jack (p9) RCA video cable connection for an external device. CONNECTION 2. 3. 4. INITIAL SETTING 5. 6. 7. 8. MENU VIDEO L AUDIO R HEADPHONE VOLUME CHANNEL POWER WATCHING TV 1 2 3 4 5 6 7 8 OPTIONAL SETTING Rear Panel 1. ANT. IN jack (p8) RF coaxial cable connection for your antenna or cable/satellite box. COAXIAL (digital audio) output jack (p9) Digital audio coaxial cable connection for a decoder or an audio receiver. Use digital audio input jack of an external device. S-VIDEO input jack (p9) S-video cable connection for an external device. AUDIO input jacks (p9) RCA audio cable connection for an external device. VIDEO input jack (p9) RCA video cable connection for an external device. AC Power cord Connect to a standard AC outlet to supply power to this unit. TROUBLESHOOTING 2. INFORMATION 3. 4. 5. 6. VIDEO L S-VIDEO R COAXIAL ANT. IN 1 2 3 4 5 6 EN 7 CONNECTION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: · Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF antenna rear of this unit RF coaxial cable or ANT. IN cable TV company *Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to "Initial Setup" on page 10.) Note: · For your safety and to avoid damage to device, please unplug the RF coaxial cable from the antenna input jack before moving the unit. · If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions. · To easily switch your reception source between antenna and cable, install an antenna selector. · If you connect to the cable system directly, contact the CATV installer. [Connection to Cable Box or Satellite Box] Connect the RF coaxial cable on your home outlet to the input jack of the cable/satellite box. Use another RF coaxial cable to connect the antenna input jack of the unit to the output jack of the cable/satellite box. e.g.) satellite dish cable/satellite box rear of this unit ANT. IN RF OUT or cable TV company RF coaxial cable RF coaxial cable ANT. IN *Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider. 8 EN INTRODUCTION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [S-video or Video Cable Connection (Rear)] S-video connection offers good picture quality for video devices connected to the unit. Video connection offers standard picture quality for video devices connected to the unit. Make the connection as illustrated below. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. CONNECTION RCA audio cable INITIAL SETTING e.g.) S-VIDEO OUT L R AUDIO OUT VIDEO rear of this unit DVD player with the S-video output jack VIDEO OUT L S-VIDEO R COAXIAL ANT. IN WATCHING TV S-video cable or RCA video cable AUDIO OUT L R VIDEO rear of this unit e.g.) VIDEO OUT L S-VIDEO R COAXIAL ANT. IN OPTIONAL SETTING VCR RCA audio cable · To use the S-video or video input jack on the rear of this unit, press [INPUT SELECT] to select "VIDEO1". [Video Cable Connection (Front)] Video connection offers standard picture quality for video devices connected to the unit. Make the connection as illustrated below. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. TROUBLESHOOTING e.g.) front of this unit AUDIO OUT L R VIDEO OUT MENU VIDEO L AUDIO R HEADPHONE VOLUME camcorder video game RCA video cable INFORMATION RCA audio cable · To use the video input jack on the front of this unit, press [INPUT SELECT] to select "VIDEO2". Note: · If you connect to the S-video jack and the video jack at the same time, the S-video connection will have priority. [Digital Audio Output Connection (for digital broadcasting only)] If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. e.g.) VIDEO L rear of this unit DIGITAL AUDIO COAXIAL IN R S-VIDEO COAXIAL ANT. IN Dolby Digital decoder digital audio coaxial cable 9 EN INITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and "AUTO PRESET CH", which automatically scans and memorizes viewable channels. Note: · If you connect the cable system directly, contact the CATV installer. · If you press [POWER] or [MENU] during "AUTO PRESET CH", this setting will be canceled. · The initial auto channel scan function can be executed for either TV/DTV or CATV only once. If you want to scan both TV/DTV and CATV, you need to select "CHANNEL SETUP" in the main menu to scan and memorize other channels after initial presetting is completed. (Refer to page 11.) · You can cancel or exit the initial "AUTO PRESET CH" menu by pressing [MENU]. · When no channel can be received by "AUTO PRESET CH", "NO TV SIGNALS" is displayed on the TV screen. · If there is no signal input from the antenna terminal and no operation for more than 5 seconds, "HELPFUL HINTS" appears. Follow the instructions listed on the TV screen. - HELPFUL HINTS 1. PLEASE CHECK TO SEE IF THE ANTENNA / CABLE / S AT E LLI T E I S P ROP E RLY CONNECTED. 2. DID YOU PERFORM "AUTO PRESET CH"? 3. PLEASE REFER TO FRONT PAGE OF THE OWNER'S MANUAL OR REAR PANEL FOR SUPPORT LINE INFORMATION. Before you begin: Make sure if the unit is connected to antenna or cable. 1 After making all the necessary connections, press [POWER] to turn on the unit. POWER · This operation may take a few moments. 2 Use [CH K / L] or [VOL X] to select the on-screen CH SELECT LANGUAGE ENGLISH NEXT:PRESS CHK ESPAÑOL DESPUÉS:PRESIONE CHL FRANÇAIS APRÈS:PRESSEZ VOLX language from the choices on the left side of the TV screen. (ENGLISH / ESPAÑOL / FRANÇAIS) or CH Main Menu This section describes the overview of the main menu displayed when you press [MENU]. For more details, see the reference page for each item. The main menu consists of the function setting items below. Press [MENU]. or VOL · Press [CH K] for English. · Press [CH L] for Spanish. · Press [VOL X] for French. e.g.) digital TV mode - TV SETUP PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] DTV SETUP 3 Use [CH K / L] to select "AUTO PRESET CH(TV/DTV)" CH - INITIAL SETUP 1. PLEASE CONNECT ANTENNA OR CABLE OR SATELLITE TO THIS UNIT. 2. SET UP THE ITEMS WITH , AND BUTTONS. AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV) MENU for TV channels or "AUTO PRESET CH(CATV)" for CATV channels, then press [VOL X]. or CH · PICTURE You can adjust the picture quality. (Refer to "Picture Adjustment" on page 16.) · CHANNEL SETUP You can automatically scan the viewable channels and remove those that are undesired. (Refer to "Auto Channel Scan" on page 11.) · V-CHIP SETUP You can set the viewing limitations. (Refer to "V-chip" on page 19.) · LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. (Refer to "Language Selection" on page 11.) · CAPTION You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. (Refer to "Closed Caption" on page 16.) · DTV SETUP You can set the screen display or caption in the DTV mode. (Refer to "DTV Closed Caption" on page 17.) VOL · Scanning and memorizing the channels automatically start. CH 25 AUTO PRESET CH(TV/DTV) · When the scanning and memorizing are completed, the lowest memorized channel in the broadcasting will be displayed. 10 EN INTRODUCTION Auto Channel Scan If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you recover the DTV channel you deleted, you will need to perform auto channel scan. Note: · If you connect the cable system directly, contact the CATV installer. · If you press [POWER] or [MENU] during "AUTO PRESET CH", the setting will be canceled. · When no channel can be received by "AUTO PRESET CH", "NO TV SIGNALS" is displayed on the TV screen. · Channel setting will be saved even if the power fails. · If you have Spanish or French menus and need English, press [MENU]. Use [CH K / L] to select "IDIOMA" or "LANGAGE". Press [VOL X] to select "ENGLISH". Press [MENU] to remove the main menu. · With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost. Before you begin: Make sure if the unit is connected to antenna or cable. CONNECTION 1 Press [MENU] to display the main menu. MENU INITIAL SETTING 2 Use [CH K / L] to select "CHANNEL SETUP", then press [VOL X]. e.g.) digital TV mode CH - TV SETUP PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] DTV SETUP Language Selection You can choose English, Spanish, or French as your on-screen language. or CH WATCHING TV 1 Press [MENU] to display the main menu. MENU VOL 3 2 Use [CH K / L] to select "LANGUAGE", Use [CH K / L] to select your desired preset type, then press [VOL X]. e.g.) digital TV mode CH - CHANNEL SETUP ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min. OPTIONAL SETTING then press [VOL X] repeatedly to change the setting. e.g.) digital TV mode - TV SETUP PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] DTV SETUP or CH CH TROUBLESHOOTING or CH VOL ENGLISH · When aerial antenna is connected, select "AUTO PRESET CH (TV)", "AUTO PRESET CH (DTV)" or "AUTO PRESET CH (TV/DTV)". · When connected to CATV, select "AUTO PRESET CH (CATV)". · Scanning and memorizing the channels automatically start. e.g.) digital TV mode D25 MENU VOL ESPAÑOL FRANÇAIS INFORMATION 3 Press [MENU] to exit. AUTO PRESET CH(DTV) · When the scanning and memorizing are completed, the lowest memorized channel will be displayed. · When you selected "AUTO PRESET CH (TV/DTV)", the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If there is no analog channel, the lowest memorized digital channel will be displayed. 11 EN WATCHING TV Channel Selection Select channels by pressing [CH K /L] or [the Number buttons]. · To select the memorized channels, use [CH K / L] or [the Number buttons]. · To select the non-memorized channels, use [the Number buttons]. To Use [the Number buttons] TV Volume Adjustment This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. Use [VOL X / Y] to adjust the audio volume. VOL or VOL VOLUME 20 - When selecting analog channel 12 1 2 DTV - When selecting digital channel 12-1 Be sure to press [­/ENT] before entering the minor channel number. ­/ENT · The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. · The volume bar display will automatically disappear in a few seconds. Press [MUTE] to turn off and on the sound. 1 2 1 · Press [CHANNEL RETURN] to return to the previously viewed channel. · When you select a channel larger than 100, press [+100] first. Then use [the Number buttons] to press the lower 2-digit numbers. MUTE MUTE 20 About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. What is the minor channel? By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network. NTSC (analog mode) [Air Time] 18:00 18:30 CH4 (high definition TV) CH4 · "MUTE" is displayed on the TV screen. Press [MUTE] again or [VOL X / Y] to recover the original volume. ATSC (digital mode) CH4 No signal No signal 19:00 CH4 CH4-1 No signal 19:30 CH4 No signal CH4-1 CH4-2 CH4-2 20:00 CH4 20:30 major channel : change automatically : change manually by using [CH / ] minor channel Although, you cannot watch the high definition TV (HDTV) program, the unit converts the HDTV signal down to the standard definition TV signal. Note: · "NO SIGNAL" will appear on the TV screen after the minor channel broadcast is over. 12 EN INTRODUCTION Switching Each Mode You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. Press [DTV/TV] repeatedly to change the input mode. DTV TV DTV In the digital mode, the detailed broadcasting information for the current channel such as program title, the program guides are displayed. Press [INFO] repeatedly to cycle through the available display modes. CONNECTION / ANALOG MODE DIGITAL MODE OFF INFO Note: · When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode. BROADCASTING INFORMATION PROGRAM GUIDE INITIAL SETTING NOW SCANNING Press [INPUT SELECT] repeatedly to cycle through the input modes. [Broadcasting Information] · The following information is displayed. 1 channel number 2 broadcast station 3 program title 4 audio language Press [AUDIO] repeatedly to cycle through the available audio languages. ("OTHER" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.) 2 3 4 KABC A Day of Memories ENGLISH 1/3 CH 95-03 WATCHING TV ANALOG MODE DIGITAL MODE INPUT SELECT 1 OPTIONAL SETTING VIDEO1 VIDEO2 [Program Guide] · The program guide added to broadcasting information is displayed. KABC CH 95-03 A Day of Memories ENGLISH 1/3 A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. Next - Push Vol Y Key Back - Push Vol X Key · To use the video or S-video input jack on the rear of the unit, select "VIDEO1". · To use the video input jack on the front of the unit, select "VIDEO2". TROUBLESHOOTING program guide Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV INFORMATION Note: · When the program guide consists of more than 6 lines, use [VOL X/Y] to scroll. · "No description provided" is displayed when the program guide is not provided. · While the program guide is displayed, the closed caption function is interrupted. · In external input mode, the following screen is displayed; e.g.) When an external device is connected to S-video input jack. VIDEO 1 In the analog mode, the current channel number is displayed. Press [INFO]. CH 25 INFO · The current channel number is displayed at the topright corner of the TV screen. · To clear the display, press [INFO] again. · Available languages differ depending on the broadcast. · The information display will automatically disappear in a few seconds when the closed caption is on. · Pressing [AUDIO] does not control external audio source. 13 EN WATCHING TV TV Screen Display Mode DTV Sleep Timer The sleep timer can be set to automatically turn off the unit after an incremental period of time. 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. 1 Press [MENU] to display the main menu. MENU 1 Press [SLEEP] to set the sleep timer. 2 Use [CH K / L] to select "DTV SETUP", then press [VOL X]. e.g.) digital TV mode CH - TV SETUP PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] DTV SETUP SLEEP SLEEP OFF · Sleep timer display appears on the TV screen. or CH 2 Press [SLEEP] repeatedly to change the amount of time until shut off. VOL SLEEP SLEEP 120 MIN. 3 Use [CH K / L] to select "DTV DISPLAY", then use CH [VOL X / Y] to switch the desired TV aspect ratio. or CH - DTV SETUP DTV DISPLAY [LETTERBOX] DTVCC · You can set the unit to turn off after a set period of time (from 30 to 120 minutes). · Each press of [SLEEP] will increase the time by 30 minutes. · After set up, the sleep timer display can be called up for checking by pressing [SLEEP]. To Cancel the Sleep Timer Press [SLEEP] repeatedly until "SLEEP OFF" is displayed on the TV screen. VOL or VOL Note: · The sleep timer setting display will automatically disappear in a few seconds. · When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. LETTERBOX ZOOM [LETTERBOX] Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen. [ZOOM] Enlarge and display the center area of the digitalsupported program. The right and left side of image will be cut off. 4 Press [MENU] to exit. MENU Note: · You may not switch the display mode depending on the program. 14 EN OPTIONAL SETTING Channel Add/Delete The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels. INTRODUCTION CONNECTION 1 Press [MENU] to display the main menu. MENU 6 Press [MENU] to exit. MENU 2 Use [CH K / L] to select "CHANNEL SETUP", then press [VOL X]. e.g.) digital TV mode - TV SETUP - Note: · "ADD/DELETE(DTV)" or "ADD/DELETE" menu will disappear automatically in a few seconds. · In the digital mode (DTV), you can add or delete channels only for major channel. · Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to "Auto Channel Scan" on page 11.) INITIAL SETTING CH or CH PICTURE CHANNEL SETUP V-CHIP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] DTV SETUP WATCHING TV VOL