User manual EMERSON EWD7003

OWNER'S MANUAL EWD7003 DVD PLAYER EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4) Follow Instructions - All operating and use instructions should be followed. 5) Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6) Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7) Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. PORTABLE CART WARNING 9) A product and cart combination should be (Symbol provided by RETAC) moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10)Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. S3125A The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11)Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12)Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13)Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14)Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 15)Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16)Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17)Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18)Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19)Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 20)Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21)Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22)Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 256-2487 or visit our web site at http://www.funai-corp.com Please read before using this equipment. PRECAUTIONS LASER SAFETY This player employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, ON THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. ­2­ EN TABLE OF CONTENTS I PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 I INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 4 I ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 I FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 I FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 6 FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 REAR VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 6 Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 I HOOK UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck . . . . . . . . . . . . . . . 8 Connecting to a Dolby Digital decoder . . . . . . . . . . . . . . 8 Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 I PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CALLING UP A MENU SCREEN DURING PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 9 Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 10 Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 10 Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the On-Screen Display . . . . . . . . . . . . . . . . . Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . . Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 10 10 10 10 10 11 11 11 11 11 11 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 14 14 15 16 16 I I I I INDICE I CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . PANEL DELANTERO / VISTA TRASERA . . . . . . . . . MANDO A DISTANCIA. . . . . . . . . . . . . . . . . . . . . . . Instalación de las Pilas . . . . . . . . . . . . . . . . . . . . . . . . I CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a un Televisor . . . . . . . . . . . . . . . . . . . . . . . . Conexión a un Amplificador Equipado con tomas de Entrada Digital, Platina MD o Platina DAT . . . . . . . . . . Conexión a un Descodificador Dolby Digital . . . . . . . . . Conexión a un Televisor o a un Televisor Estéreo Que 17 17 17 18 18 18 18 18 tenga tomas Component Video in . . . . . . . . . . . . . . . . 18 I REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 19 Reproducción de un DVD de Vídeo o un CD de Audio . 19 ­3­ EN INTRODUCTION Supplied Accessories · Remote control Part #NA654UD · Two AA batteries · Owner's Manual · VIDEO/AUDIO cables · RETURN STOP SHEET Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Symbols Used in this Manual The following symbols appear below in some headings and notes in this manual, with the following meanings! DVD-V : Description refers to playback of DVD video discs. CD : Description refers to playback of audio CDs. MP3 : Description refers to playback of MP3 discs. QUICK : Description refers to the items to be set in the QUICK mode. ABOUT THE DISCS Playable Discs The following discs can be played back on this DVD player. ¡DVD video ¡DVD-R/RW* ¡DVD+R/RW* ¡Audio CD ¡CD-R/RW* ¡MP3* *Depending on the types or the writing method of the medium some discs can not be played. · Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played back properly due to the factors such as scratches, dirt or special properties of the disc. · Discs made on personal computers may not be played back properly due to the different environment or the settings of the application you use. We recommend always to use the standardized, rightly formatted discs. (Please contact the sales agency for more detail). This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM. · Some discs include region codes as shown below. 1 · The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on DVD player with the same region code. For Customer Use: Read carefully the information located at the bottom of your DVD player and enter below the Serial No.Retain this information for future reference. Model No. DVD player Serial No. __________________________ The following discs cannot be played back on this DVD player. ¡DVD with region codes other than 1 or ALL. ¡DVD-ROM ¡DVD-RAM (Never play back, otherwise malfunction may result.) ¡CD-ROM ¡VSD ¡CDV (Only plays back the audio part.) ¡CD-G (Only plays back the sound.) ¡CD-I (Never play back, otherwise malfunction may result.) ¡SACD ¡Photo CD (Never play back, otherwise malfunction may result.) ¡Video CD (Never play back, otherwise malfunction may result.) Any other discs without compatibility indications. ­4­ EN ABOUT THE DISCS Disc Types [DVD] Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected do not run as desired, refer to the manual accompanying the disc. [MP3] Data on a MP3 is divided into sections called "groups", and then into subsections called "tracks", each of which is given a group or track number. Example Group 1 Track 1 Track 2 Track 3 Track 4 Group 2 Track 1 Track 2 Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 [Audio CD] Data on an audio CD is divided into sections called "tracks", each of which is given a track number. Example Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 FEATURES ¡Dolby Digital sound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. ¡Still/fast/slow/step playback ¡Random playback for audio CD and MP3 ¡Program playback for audio CD and MP3 ¡DVD menus in a desired language ¡Screen saver/Auto power-off functions The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 30 minutes, the power is automatically turned off. ¡Search Chapter search / Title search / Track search / Time search ¡Repeat Chapter / Title / Track / Group / All / A-B ¡Zoom ¡Marker An electronic references point designated by user can be called back. ¡Subtitles in a desired language ¡Selecting a camera angle ¡Choices for audio language and sound mode ¡Parental lock ¡Automatic detection of discs This player automatically detects if a loaded disc is DVD, audio CD or MP3 on disc. ¡Resume Play ¡Virtual Surround ¡Component Video Out Jacks Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks. ¡Bit rate indication ¡DRC (Dynamic range control) You can control the range of sound volume. ¡Playing an MP3 disc ¡Direct Search ¡On-screen display ¡Black Level Setting ­5­ EN FUNCTIONAL OVERVIEW FRONT PANEL [Fig. 1] REAR VIEW AUDIO OUT DIGITAL AUDIO OUT PCM/ BITSTREAM L Y Cr COMPONENT VIDEO OUT COAXIAL R VIDEO OUT Cb S-VIDEO OUT 11 12 13 14 15 16 [Fig. 2] 10. DISC IN Indicator light appears when a disc is in the DVD player. 11. MAIN (AC Power Cord) connect to a standard AC outlet 12. COAXIAL (Digital audio out) connect to AUDIO inputs of a digital (coaxial) audio equipment 13. AUDIO OUT (Left/Right) connect to AUDIO inputs of an amplifier, receiver or stereo system 14. VIDEO OUT connect to the Video Input of a TV. 15. COMPONENT VIDEO OUT connect to a TV with Component video in jacks. 16. S-VIDEO OUT connect to a TV with S-Video inputs Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the player. 9. PAUSE pause playback temporarily / frame-by-frame playback h 10. REVh to view DVD picture in fast reverse motion 11. PLAY to start a DVD disc playback 12. SETUP to access or remove the DVD setup menu 13. MODE to set up programmed or random playback (Audio CD) to set the black level and virtual surround during DVD playback 14. ZOOM enlarge DVD video image 15. TITLE to display title menu of a disc 16. ENTER acknowledge menu selection 17. RETURN to return previous or remove setup menu 18. Arrow (s B K L) (left/right/up/down) select an item in the menu 19. MENU to display the menu of the DVD disc 20. STOP to stop a DVD disc playback g 21. FWDg to view DVD picture in fast forward motion 22. SKIP H,G to skip chapter/tracks 23. 0-9 numerical buttons select numbered items in a menu +10 use this button to enter number 10 and above 24. OPEN/CLOSE to open/close the disc tray 25. SEARCH MODE to locate a desired point 1. POWER to switch the player to ON or OFF 2. SKIP H / SEARCH h goes to previous chapter or track during playback; press and hold for 1.5 seconds for a reverse search 3. PLAY to start or resume disc playback 4. SKIP G / SEARCH g goes to next chapter or track during playback; press and hold for 1.5 seconds for a forward search 5. STOP to stop playback 6. OPEN/CLOSE to open/close the disc tray 7. Disc tray 8. POWER Indicator lights when the power is on. 9. PLAY Indicator lights during disc playback. REMOTE CONTROL 1 POWER DISPLAY 25 SEARCH MODE OPEN/ CLOSE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 24 AUDIO 1 SUB TITLE 2 5 8 0 3 6 9 +10 SKIP 4 ANGLE 7 REPEAT CLEAR 23 A-B PAUSE PLAY REV STOP SETUP TITLE MENU FWD MODE ENTER ZOOM RETURN 22 21 20 19 18 17 16 [Fig. 3] 1. DISPLAY to access or remove the display screen during DVD or Audio CD playback 2. POWER switch DVD player ON or OFF 3. AUDIO to choose audio languages or sound modes 4. SUBTITLE subtitle language DVD selector 5. ANGLE select DVD camera angle 6. REPEAT repeat chapter, track, title, all. 7. REPEAT A-B repeat a specific segment 8. CLEAR to reset the setting ­6­ EN FUNCTIONAL OVERVIEW Loading the Batteries 1. Open the battery compartment cover. 2. Insert two AA batteries, with each one oriented correctly. 3. Close the cover. NOTES · Do not mix alkaline and manganese batteries. · Do not mix old and new batteries. HOOK UPS CAUTION: · · · · Be sure to turn off the Player and equipment to be connected before connecting. Read through the operation manual for the equipment to be connected. Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables. Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it may cause electrical interference when you are watching television programs. Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures of higher quality. To Right (red) and Left (white) AUDIO OUT jacks AUDIO OUT DIGITAL AUDIO OUT PCM/ BITSTREAM L Y Cr COMPONENT VIDEO OUT A/V-compatible or wide screen TV To Right (red) and Left (white) AUDIO INPUT jacks To VIDEO INPUT jack To S-VIDEO INPUT jack COAXIAL R VIDEO OUT Cb S-VIDEO OUT To S-VIDEO OUT jack To VIDEO OUT jack or [Fig. 4] Stereo system To Right (red) and Left (white) ANALOG AUDIO INPUT jacks AUDIO OUT DIGITAL AUDIO OUT PCM/ BITSTREAM L Y Cr COMPONENT VIDEO OUT To S-VIDEO OUT jack To S-VIDEO INPUT jack COAXIAL R VIDEO OUT Cb S-VIDEO OUT A/V-compatible or wide screen TV or To Right (red) and Left (white) AUDIO OUT jacks To VIDEO OUT jack To VIDEO INPUT jack [Fig. 5] ­7­ EN HOOK UPS NOTES: · · · Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. Be sure to turn off the power to all components in the system before connecting another component. Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player. Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck. AUDIO OUT L Y Cr COMPONENT VIDEO OUT Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To VIDEO OUT jack DIGITAL AUDIO OUT PCM/ BITSTREAM To S-VIDEO OUT jack Cb S-VIDEO OUT COAXIAL R To COAXIAL DIGITAL AUDIO INPUT jack VIDEO OUT To S-VIDEO INPUT jack A/V-compatible or wide screen TV or To COAXIAL DIGITAL AUDIO OUT jack To VIDEO INPUT jack [Fig. 6] NOTES: · · The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. Set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.(See page 13 to set ON for Dolby Digital) Connecting to a Dolby Digital decoder If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. Use an audio coaxial digital cables (not included) for the audio connections. Front speaker (left) Center speaker Front speaker (right) To COAXIAL DIGITAL AUDIO OUT jack To COAXIAL DIGITAL AUDIO INPUT jack AUDIO OUT DIGITAL AUDIO OUT PCM/ BITSTREAM L Y Cr COMPONENT VIDEO OUT To S-VIDEO OUT jack To S-VIDEO INPUT jack A/V-compatible or wide screen TV COAXIAL R Dolby Digital, decoder VIDEO OUT Cb S-VIDEO OUT To VIDEO OUT jack or To VIDEO INPUT jack Surround speaker (left) Surround speaker (right) Subwoofer [Fig. 7] NOTES: · · If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup mode. Unless connected to a Dolby Digital decoder, set Dolby Digital to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks To Right (red) and Left (white) AUDIO OUT jacks AUDIO OUT DIGITAL AUDIO OUT PCM/ BITSTREAM L Y Cr COMPONENT VIDEO OUT COAXIAL R Stereo system VIDEO OUT Cb S-VIDEO OUT To COMPONENT VIDEO OUT jack To Right (red) and Left (white) ANALOG AUDIO INPUT jacks A/V-compatible or wide screen TV To COMPONENT VIDEO INPUT jack [Fig. 8] HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV's 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked "ANT IN"), then connect the RF modulator to your TV's antenna terminal as described above. NOTE · The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal through an RF Modulator. ­8­ EN PLAYING A DISC Basic Playback Disc Menu DVD-V Getting started · · CD 1 Press MENU. · The DVD main menu will appear. 2 If the feature is not available, DVD-V symbol may appear on the TV screen. 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. Turn on the power of the TV, amplifier and any other components which are connected to the DVD. Make sure the TV and audio receiver (commercially available) are set to the correct channel. 1 Press POWER. 2 Press OPEN/CLOSE to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. 4 Press PLAY. · The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. · When you playback the DVD with a title menu is recorded, it may appear on the screen. In this case, refer to "TITLE MENU". 5 Press STOP twice to stop playback. Title Menu DVD-V 1 Press TITLE. · The title menu will appear. 2 If the feature is not available, NOTES: · A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. · With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. · During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. symbol may appear on the TV screen. 3 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. · Playback will begin at the selected Title. CALLING UP A MENU SCREEN DURING PLAYBACK DVD-V · · Press MENU to call up the DVD main menu. Press TITLE to call up the title menu. · Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. NOTE: General Features DVD may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use Arrow ( L / K / B / s ) to highlight your selection in the DVD main menu and press ENTER to confirm. Step by Step Playback DVD-V 1 During playback, press PAUSE. · Playback will pause and sound will be muted. 2 The disc advances by one frame each time PAUSE NOTE: · Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. is pressed. Pause 3 To exit step by step playback, press PLAY. DVD-V 1 During playback, press PAUSE. · Playback will pause and sound will be muted. 2 To continue playback, press PLAY. CD Resume DVD-V CD 1 During playback, press STOP. · Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the point at which playback was stopped. · To cancel resume, press STOP twice. ­9­ EN PLAYING A DISC Fast Forward / Reverse Search DVD-V CD MP3 1 During playback, press FWDg or REVh repeatedg h ly to select the required forward or reverse speed: x2, x8, x50, x100. · If you are using SKIP G / SEARCH g on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the faster the speed will be). When · For audio CDs, the speed is fixed at x16. · For MP3, the speed is fixed at x8. 2 Within 30 seconds, select a desired track number using numerical buttons. For single digits press "0" first. · Playback will start at the selected track. Using the SKIP H G During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. · Track number will appear briefly on the DVD display panel. · If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track. you reach the desired speed, release the button. 2 To return to normal playback, press PLAY. NOTE: · SKIP H G are not available when playback is stopped. Slow Forward / Slow Reverse Title / Chapter Search DVD-V 1 During playback, press PAUSE. 2 Press FWDg or REVh . g h · Slow motion playback will begin and sound will be muted. 3 Press FWDg or REVh repeatedly to select g h DVD-V 1 Press SEARCH MODE once for the Chapter search, twice for the Title search during playback. /2 the required speed: 1/16, 1/8, 1/2 of the normal playback. · If you are using SKIP H / SEARCH h on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the slower the speed will be). When 2 Enter the desired chapter/title number using you reach the desired speed, release the button. 4 To return to normal playback, press PLAY. numerical buttons. Zoom Time Search DVD-V The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 Press ZOOM during playback. · Playback will continue. 2 Press ZOOM repeatedly to select the required DVD-V CD 1 During playback, press SEARCH MODE three times zoom factor: x2, x4 or OFF. 3 Use Arrow ( L / K / B / s ) to move the zoomed (CD: twice) to display the Time Search on the TV screen. 2 Within 30 seconds, enter a desired disc time using numerical buttons. · Playback will start at the specified time. 3 Press CLEAR to erase the incorrect input. picture across the screen. 4 To exit zoom mode, press ZOOM to OFF. NOTES: · Zooming function does not work while disc menu is shown. · x4 zoom is not available on some discs. Repeat · REPEAT are available only during playback. REPEAT TITLE / CHAPTER Track DVD-V CD To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. OFF (repeat off) There are three ways to begin playback on an Audio CD at a specific Track. Using the Numerical buttons 1 Press numerical buttons to enter the desired Track number. · Playback will start at the selected track. · For single digit tracks (1-9), press a single number (eg. track 3, press 3). · To play track 26, press +10, 2, 6 on the numerical button. CHAPTER TITLE (current chapter repeat) (current title repeat) NOTES: · Repeat Title/Chapter is not available with some scenes. · The REPEAT setting will be cleared when moving to other title or chapter. Using the SEARCH MODE 1 Press SEARCH MODE. · The track search display appears. ­ 10 ­ EN PLAYING A DISC REPEAT TRACK Random Playback CD To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. ALL (entire disc repeat) OFF (repeat off) CD This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press TRACK (current track repeat) MODE twice. · RANDOM screen appears. 2 Press PLAY to start ran- RANDOM CD [AUDIO] TOTAL 0:45:56 RANDOM PROGRAM --no indication-- dom playback. NOTES: · · The REPEAT setting will be cleared when moving to other track. Repeat playback does not function during repeat A-B playback. NOTES: · PLAY REPEAT A-B If you like to repeat the current track in the random selection, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire random selection press REPEAT repeatedly until ALL appears during playback. DVD-V CD MP3 Playback 1 Press REPEAT A-B at your chosen starting point. · A- appears briefly on the TV screen. 2 Press REPEAT A-B again at your chosen end point. · A-B appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence, press REPEAT A-B. MP3 When a CD with MP3 files is inserted in the DVD player, the MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel. 1 In stop mode, press K or L to select the desired group or track. · If a group is selected, press B or ENTER to go on to the track selection screen. Press K or L to choose a track, then press PLAY or ENTER. · If a track is selected, press PLAY or ENTER to start playing tracks. Starting from the one you've just chosen the subsequent tracks will be played. · Choose FIRST PLAY to start playback from the beginning of the listed tracks. · Press TITLE to return to the first item. 2 Press STOP to stop playback. NOTES: · · · · · Folders are known as Groups; files are known as Tracks. MP3 files are accompanied by 3 icon. Maximum of 255 folders can be recognized. Maximum of 256 files can be recognized. Up to 8 hierarchies can be created. NOTES: · · · · The repeat A-B section can only be set within the current title (for DVDs), or current track (for audio CDs). Repeat A-B is not available with some scenes in DVD. To cancel the A point which was set, press CLEAR. Repeat A-B playback does not function during title, chapter, track or all repeat playback. Program CD You may determine the order in which tracks will play. 1 In stop mode press MODE. · The PROGRAM screen will appear. 2 Press L or M to select a track, then press ENTER. · Press CLEAR to erase the The most recently entered program. 3 Press PLAY to play the programmed tracks. NOTES: · · · · · While the program is being played back, the STOP works as follows. Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed. (Program continued) Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared) Up to 99 programs can be entered. If you like to repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire program press REPEAT repeatedly until ALL appears during playback. This player recommends the use of files recorded at the below specifications: · Sampling frequency: 44.1kHz or 48kHz · Constant bit rate: 112kbps ~ 320kbps. On-Screen Information MP3 You can check the MP3 files during playback. 1 Press DISPLAY. · The name of the file currently in play will be displayed. 2 Press DISPLAY again to show the track number, the elapsed time, the repeat status, and the playback status at the top of the screen. · will be displayed when the repeat play has been selected. T - indicates Track repeat G - indicates Group (folder) repeat A - indicates Disc repeat 3 Press DISPLAY again to exit. ­ 11 ­ EN PLAYING A DISC Track Selection Subtitle Language MP3 1 Press SEARCH MODE during playback. · The FILE LIST will appear. 2 Select a desired track using Arrow (L/K/B/s). · Press B when you want to go to the next hierarchy. · Press s when you want to go back to the previous hierarchy. 3 Press PLAY to start playing DVD-V The DVD player allows you to select a language for subtitle during DVD disc (if available) playback. 1 Press SUBTITLE during playback. 2 Press SUBTITLE repeatedly to select your desired subtitle language. · The selected language will be displayed on the display bar at the top of the screen. 3 To turn off subtitles, press SUBTITLE repeatedly NOTES: · · Press SEARCH MODE to EXIT. Some selections may require additional time to be recognized. until OFF appears. NOTES: · · Pressing AUDIO may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.) If the desired language is not shown after pressing SUBTITLE several times, the disc does not have subtitles in that language. If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, `---' will be displayed instead. (Refer to page 14.) Random Playback MP3 1 Press MODE twice while playback is stopped. 2 Press PLAY to play the tracks in random order. · · Program Camera Angle MP3 This feature allows you to program a mp3 disc to play in a desired sequence. 1 Press MODE while playback is stopped. · The PROGRAM screen will appear. 2 Press K or L to select a track, then press ENTER, DVD-V Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. 1 Press ANGLE during playback. · The selected angle will be displayed on the display bar at the top of the screen. 2 Press ANGLE repeatedly to select your desired angle. to save it in a program. · Press CLEAR to erase the incorrect input. 3 Press PLAY to start programmed playback. Changing the On-Screen Display Audio Language DVD-V DVD-V You can check information about the current disc by pressing DISPLAY on the remote control. 1 Press DISPLAY during play- The DVD player allows you to select a language during DVD disc (if multi language available) playback. 1 Press AUDIO during playback. 2 Press AUDIO repeatedly to select your desired back to show current Chapter. 9/49 0:00:00 -0:00:00 · The elapsed and remaining playing time of the current chapter will be displayed. 2 Press DISPLAY again to show current Title. · The elapsed and remaining playing time of the current title will be displayed. 3 Press DISPLAY the third time. · The BIT RATE and the current repeat setting will be displayed. · If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing). 4 Press DISPLAY the fourth time to remove the display. language. Stereo Sound Mode CD 1 Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH. STEREO - both right and left channels are active (stereo) L-CH - only left channel is active R-CH - only right channel is active CD 1 Press DISPLAY during playback, the current Track NOTE: · If the Virtual Surround setting is ON, the sound mode will be fixed to STEREO, and can not be changed. will be displayed on the TV screen. · The elapsed and remaining playing time of the current track will be displayed. 2 Press DISPLAY again to show current Total Track. · The elapsed and remaining playing time of the current total track will be displayed. 3 Press DISPLAY the third time to remove the display. ­ 12 ­ EN PLAYING A DISC Parental Control CONTROL LEVELS DVD-V Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.) This feature allows you to prevent discs with alternative scenes from being played by your children. · · · · PARENTAL LEVEL Parental Level allows you to set the rating level of your DVD discs. Playback will stop if the disc's ratings exceed the level you set. 1 Press SETUP in STOP mode. 2 Press B to select CUSTOM, then press ENTER. 3 Press s or B to select ALL All parental lock is cancelled. Level 8 DVD software of any grade (adult/general/children) can be played back. Levels 7 to 2 Only DVD software intended for general use and children can be played back. Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited. Marker Setup Screen PARENTAL, then press ENTER. 4 Enter your four-digit password PARENTAL PARENTAL LEVEL ALL DVD-V during playback. CD then press ENTER. 5 Press K or L to select Use markers to memorise your favourite places on a disc. 1 Press SEARCH MODE four times (CD: three times) · The display screen and Markers will appear on the TV screen. 2 Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 PARENTAL LEVEL, then press ENTER. 6 Press K or L to select the desired level. 7 Press SETUP to exit.