CLASSIC 5` TABLE HOCKEY ASSEMBLY INSTRUCTIONS AND RULES M O D E L G0 3 1 0 2 Player Table Hockey 0310-C4 WARNING! Read all instructions carefully before you begin play. Remember, table hockey is designed to be played by adults and/or children under adult supervision. This product requires a 120-volt AC, 60 cycle power source. The game has a polarized alternating current line plug (one blade is wider than the other). If the plug does not fit into your outlet, you may have an obsolete outlet. You may need to contact an electrician to install the proper outlet. Place the power cord where it won't be stepped on or pinched by objects such as furniture, lamps, etc. It is unsafe to overload your wall outlets and extension cords. Never push objects of any kind into the openings on the game table top. Contact with a voltage point may cause an electrical short, which could result in fire or shock. Never spill liquids of any kind onto the game. Don't block the openings on the game table. They are designed for ventilation and exhaust. Blocking any opening can cause overheating and damage to the game. 1 5' 2-PLAYER TABLE HOCKEY Thank you for buying our product. We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, please do not return it to the store. Call us at: 1-800-426-1421 (THIS IS A CONSUMER ONLY NUMBER) FAX: 812-467-1399 OR WRITE TO: ESCALADE SPORTS CUSTOMER SERVICE DEPARTMENT P.O. BOX 889 EVANSVILLE, IN 47706 When contacting Escalade Sports please provide model number, serial number (if applicable), and part number if requesting a replacement part. These numbers can be found on the product, packaging, and in this Owner's Manual. 2 0310-C4 REQUIRED TOOLS PHILLIPS SCREWDRIVER ADJUSTABLE WRENCH OR STANDARD SOCKET SET 3 PARTS IDENTIFIER HARDWARE (ACTUAL SIZE MAY VARY) DESCRIPTION (EXTRA PIECES MAY BE INCLUDED) QTY. REQUIRED H1 LEG MOUNTING BOLT 12 H2 WASHER, BLACK 12 H3 NUT 12 H4 SCREW, PHILLIPS HEAD 8 4 0310-C4 PARTS IDENTIFIER ASSEMBLY PARTS DESCRIPTION QTY P1 MAIN CABINET 1 P2 P3 P4 LEG 4 PUCK CATCHER/SCORE KEEPER 2 LEG LEVELER 4 ACCESSORIES DESCRIPTION QTY A1 A2 A3 STRIKER 2 FELT STICKER 2 PUCK 5 4 ASSEMBLY INSTRUCTIONS HOCKEY TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE HOCKEY TABLE 1. PLACE MAIN CABINET P1 WITH PLAYING SIDE DOWN ON CLEAN, FLAT SURFACE. 2. ATTACH THE LEGS P2 USING LEG MOUNTING BOLTS H1, FLAT BLACK WASHERS H2, AND LOCK NUTS H3. THERE ARE 3 BOLTS, 3 WASHERS, AND 3 NUTS USED PER LEG. TIGHTEN SNUG ­ DO NOT OVERTIGHTEN. REPEAT FOR OTHER 3 LEGS. 3. SCREW LEG LEVELERS P4 INTO THE ENDS OF THE LEGS. 4. CAREFULLY TURN TABLE TO ITS UPRIGHT POSITION (2 ADULTS). STEPS 1 & 2. P4 P2 P1 H1 H3 H2 6 0310-C4 ASSEMBLY INSTRUCTIONS HOCKEY TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE HOCKEY TABLE 5. ATTACH PUCK CATCHER/SCOREKEEPER P3 TO TABLE AS SHOWN USING PHILLIPS HEAD SCREWS H4, CENTERING OVER OPENINGS. REPEAT FOR OTHER GOAL. 6. SHOWS PUCK CATCHER/SCORE KEEPER ATTACHED. 7. PEEL PADDLE FELT STICKER A2 FROM BACKING SHEET AND ADHERE TO THE UNDERSIDE OF THE STRIKERS A1. 4. STEP 5 P3 CENTER PUCK CATCHER/ SCORE KEEPER P3 OVER OPENING WITH FLANGE RESTING ON TOP OF TABLE END RAIL. H4 STEP 6 4 PIECES PER PUCK CATCHER/ SCOREKEEPER P3 H4 STEP 7 A2 NOTE: SCREWS ARE SELF-TAPPING AND WILL FORM A HOLE BY SLIGHTLY APPLYING PRESSURE AS TIGHTENING. A1 7 GAME RULES TABLE HOCKEY Table Hockey is a game for two players. To play you need the following: · A puck · Each player will need a striker The Object of the Game: To score a predetermined number of points or to score the most points in given amount of time. To Play: Flip a coin to determine who will begin play. Play begins when the puck is placed on the playing surface. Players must hit the puck with the striker and attempt to shoot it into their opponent's goal. One point is awarded when a puck is shot into the opponents goal. 8 0310-C4 90 DAY WARRANTY Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product become defective due to material or workmanship within the warranty period, contact our Customer Service Department. This warranty is not transferable and does not cover normal wear and tear, or damage caused by improper handling, installation, or use of this product. This warranty is also void if product is in any way abused, damaged, or modified from its original state, or if used for other than indoor residential use. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. 9 PARTS LIST (ALL PARTS SOLD AS INDIVIDUAL PIECES) HARDWARE DESCRIPTION PART # LEG MOUNTING BOLT WASHER, BLACK FLAT 5/16" NUT, 5/16" SCREW, PHILLIPS HEAD 0310-H1 0310-H2 0310-H3 0310-H4 , ASSEMBLY PARTS DESCRIPTION PART # MAIN CABINET LEG PUCK CATCHER/SCORE KEEPER LEG LEVELER 0310-P1 0310-P2 0310-P3 0310-P4 ACCESSORIES DESCRIPTION PART # RED STRIKER FELT PAD RED PUCK 0310-A1 0310-A2 0310-A3 PRE-ASSEMBLED PARTS DESCRIPTION PART # BLOWER MOTOR BLOWER MOTOR SCREW ELEC. DIST. BOX & CORD ASSEMBLY MANUAL AND RULES 0310-C1 0310-C2 0310-C3 0310-C4 10 0310-C4 Consumer Hotline 1-800-426-1421 Fax:1-812-467-1399 or write to: Escalade Sports Customer Service Department P.O. Box 889 Evansville, IN 47706 Ask for our full line of exciting sports products at a sporting goods retailer nearest you. Table Tennis Tables Pool Tables Basketball Dartboard Cabinets Table Hockey Tables Soccer Tables Multi-Sport Tables 0310-C4 ...