Thank you for buying our product. We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-866-556-2759 FAX: 1-866-873-3531 customerservice@escaladesports.com Please have your model number when inquiring about parts. Or write to: Escalade Sports Customer Service Department P.O. Box 889 Evansville IN 47706 When contacting Escalade Sports please provide your model number, serial number (if applicable), and part number if requesting a replacement part. These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ Your model number is located on the original carton, this owners manual, and under the table. Please retain these instructions for ordering parts. G07100 © 2002 Escalade Sports 1 For Customer Service Call 1-866-556-2759 IMPORTANT! READ THIS MANUAL ALL THE WAY THROUGH BEFORE BEGINNING TO PUT YOUR GAME TABLE TOGETHER! THEN READ EACH STEP BEFORE STARTING THAT STEP. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS POOL TABLE Tools Required: Philips Screwdriver Socket set or adjustable wrench An electric screw gun is helpful but not required. Howerver, use caution not to over tighten screws. IMPORTANT! Make sure you understand the following tips before you begin to assemble your soccer table. 1. When installing parts that have more than one bolt, start ALL the bolts in that part by hand before tightening anything. 2. Some drawings or images in this manual may not look exactly like your product. 3. This product is intended for INDOOR use only. 4. The table laminate can be cleaned with spray furniture polish. DO NOT spray furniture polish onto the table felt. READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER! © 2002 Escalade Sports 2 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 3 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 4 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 5 For Customer Service Call 1-866-556-2759 1. Find a clean, level place to begin the assembly of your pool table. We recommend building the table on the box top to protect the parts during assembly. 2. Place the main cabinet P1 on the ground with the playing side down. 3. Apply glue P12 to ALL the edges and ends of the long rail sections P1A and P1B and the short rail sections P1C, P1D, and P1E that will be attached to one another. 4. Attach long rail sections P1A and P1B to each short rail sections P1C, P1D, and P1E with flat head screw H3 as shown in Figure 1. DO NOT OVER TIGHTEN SCREWS. Figure 1 © 2002 Escalade Sports 6 For Customer Service Call 1-866-556-2759 CAUTION: Attach all parts by hand with the hardware hand tight before tightening any hardware. 5. Attach two legs P2A and P2B to the return end of the table using bolts H1 and washers H8 as shown in Figure 2. Make sure you start all bolts by hand before you tighten anything. Figure 2 6. Attach two legs P2A and P2B to the other end of the table using bolts H1 and washers H8 as shown in Figure 3. Make sure you start all bolts by hand before you tighten anything. Figure 3 © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2759 7. Attach the two spreaders P3 and the two end panels P4 as shown in Figure 4 using bolts H2 washers H9 and nuts H5. 8. Attach one leg leveler P5 to the bottom of each leg as shown in Figure 4. Figure 4 9. Lay the apron side panels P7A and P7B on a flat surface with the woodgrain side facing out and the screw holes at the bottom of the panels. MAKE SURE YOU HAVE THE GROOVE RUNNING DIAGONALLY FROM LEFT TO RIGHT ON EACH PANEL AS SHOWN IN FIGURE 5. 10. Attach the two apron corners P10 with the arrows facing up to the side panels P7A and P7B using screws H4 as shown in Figure 5. Figure 5 © 2002 Escalade Sports 8 For Customer Service Call 1-866-556-2759 11. Position the apron side panels P7A and P7B on the main cabinet P1 as shown in Figure 6. The panels are positioned correctly when the apron corners P10 rest inside the corner caps that are attached to the main cabinet. Once you have the side panels placed correctly, attach them to the main cabinet using screws H3 as shown in Figure 6. 12. Slide the apron end panel P8 into each apron corner P10 and attach to apron corners using screws H4. Next attach the apron end panel to the main cabinet P1 using screws H3 as shown in Figure 6. 13. With the rubberized sides of the long return boards P6A and P6B facing the playfield slide them in the groves of the apron side panels and the long rails. Make sure you have the angled corners towards the aprong corners P10. Figure 6 © 2002 Escalade Sports 9 For Customer Service Call 1-866-556-2759 14. Attach two apron corners P10 to each end of apron ball return panel P9 using screws H4. Position the apron corners so the screw hole is not in line with the groove for the apron ball return panel P9. 15. Attach the assembled apron return panel P9 to both apron side panels P7A and P7B using screws H4. Attach the apron to the main cabinet P1 using screws H3 as shown in Figure 7. NOTE: YOU WILL NOT BE ABLE TO REACH THE BOTTOM SCREW ON THE APRON CORNER P10 BECAUSE OF THE CORNER CAP. Figure 7 16. Bend the short return board P11 by hand and insert into the groves of both apron side panels P7A and P7B by sliding first in the direction noted by an "X" as shown in Figure 8. Next slide the board in the direction noted by the letter "Y" into the grove on the apron ball return panel P9. 17. Attach the short return board P11 using screws H6 as shown in Figure 8. 18. Position the metal brackets H7 as shown and tap down into place with a hammer as shown in Figure 8. Figure 8 © 2002 Escalade Sports 10 For Customer Service Call 1-866-556-2759 THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY. 19. After the glue has dried (Approximately 12 Hours) turn the table over. Put the table in its final resting place in your room. Using a capenders level or rolling a pool ball on the surface, level the table by turning the leg levelers P5. 20. Using two pieces of string put the playfield spots A6 on the table as shown. Align with the second sight on the side rail and the center sight on the end rail. © 2002 Escalade Sports 11 For Customer Service Call 1-866-556-2759 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 H8 H9 P1 P1A P1B P1C P1D P1E P1F P2A P2B P3 Description 5/16 x 1-1/4 Bolt 1/4 x 1-1/4 Bolt 1-1/4 Flat Head Screw 5/8 Round Head Screw 1/4 Hex Nut 1" Round Head Screw Bracket 5/16 Flat Washer 1/4 Flat Washer Main Cabinet Long Rail (Right) Long Rail (Left) Short Rail Ends W/Hole Short Rail Center Short Rail Return End Hinge Right Leg Left Leg Spreader Qty. 16 16 34 16 16 5 4 16 32 1 1 1 2 1 1 14 2 2 2 Part# P4 P5 P6A P6B P7A P7B P8 P9 P10 P11 P12 A1 A2 A3 A4 A5 A6 A8 K1 Description Model # G07100 Qty. 2 4 1 1 1 1 1 1 4 1 1 1 2 2 1 1 2 1 1 End Panel Leg Leveler Long Return Board, A Long Return Board, B Right Apron Left Arpon End Apron End Apron With Ball Return Apron Corner Short Return Board Glue Billiard Ball Set Cue Chalk Pool Cue Triangle Table Brush Playfield Spots Owners Manual Hardware Kit © 2002 Escalade Sports 12 For Customer Service Call 1-866-556-2759 ...