THE FENDER® FM 412 LOUDSPEAKER ENCLOSURE Your new FM 412 loudspeaker enclosure features four 12" (30.5cm) speakers and is capable of handling 100 Watts. The FM 412 speaker was designed to complement the Fender® FM 100H amplifier, but it can be used with any 4­ohm, 100­watt instrument amplifier with a standard 1/4" speaker output jack. Read these instructions and your amplifier manual before making connections. SPECIFICATIONS PART NUMBER DRIVERS CABINET 2317800000 Four, 12" (30.5 cm), Special Design speakers 18 mm plywood 99 dB, 1 Watt - 1 Meter 100 Watts 4 1/4" Input Jack Connecting the Fender® FM 412 Loudspeaker Connect the FM 412 to the speaker output jack on your FM 100H amplifier with its included speaker cable or any unshielded, quality speaker cable. When using the FM 412 with other amplifiers, check the amplifier output specifications for compatibility. Always make certain that the amplifier has a 4­ohm output impedance capability and the power output does not exceed 100 watts. SENSITIVITY POWER HANDLING IMPEDANCE CONNECTIONS DIMENSIONS Height: Width: Depth: WEIGHT 30.0 in (76.2 cm) 29.5 in (74.9 cm) 14.3 in (36.3 cm) 82.0 lb (36.9 kg) A PRODUCT OF: MONO 4 FENDER MUSICAL INSTRUMENTS CORP., CORONA, CA U.S.A. MADE IN CHINA Product specifications are subject to change without notice. POWER RATING 100W MODEL A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION CORONA, CALIFORNIA USA TYPE: PR 656 SERIAL NUMBER IS A REGISTERED TRADEMARK OF FENDER MUSICAL INSTRUMENTS CORP. FENDER LOUDSPEAKER SYSTEMS ARE CAPABLE OF PRODUCING VERY HIGH SOUND PRESSURE LEVELS WHICH MAY CAUSE TEMPORARY OR PERMANENT HEARING DAMAGE. USE CARE WHEN SETTING AND ADJUSTING VOLUME LEVELS DURING USE. WARNING: Fender® is a registered trademark of FMIC. Other trademarks are property of their respective owners. © 2005 FMIC. All rights reserved. P/N 069196 REV A ...