Detailed instructions for use are in the User's Guide.
User's Manual
2005
Contents
1. 1.1. 1.2. 1.3. INTRODUCTION ............................................................................................................................................. 3 WHAT IS IN THE BOX?....................................................................................................................................... 3 SYSTEM REQUIREMENTS................................................................................................................................... 3 DOWNLOADING MAP ........................................................................................................................................ 4 Downloading Map via NAVIGATION .................................................................................. 4 Downloading Map via SD card reader .............................................................................. 13
1.3.1. 1.3.2. 1.4. 2. 3. 3.1. 3.2.
NAVIGATION HARDWARE INSTALLATION..................................................................................................... 16 CHECKING GPS ............................................................................................................................................ 18 GETTING ACQUAINTED WITH NAVIGATION SYSTEM ...................................................................... 19 MOVING AROUND THE MAP............................................................................................................................ 20 USING MENUS................................................................................................................................................ 20 Main Menu........................................................................................................................ 20
3.2.1. 3.3.
SETTING OPTIONS .......................................................................................................................................... 21 Map View .......................................................................................................................... 21 Map View Modes ............................................................................................................... 22 Setting Route Options........................................................................................................ 23
3.3.1. 3.3.2. 3.3.3. 4. 4.1. 4.2.
USING THE NAVIGATION SYSTEM.......................................................................................................... 24 ENTERING A START LOCATION........................................................................................................................ 24 ENTERING A DESTINATION.............................................................................................................................. 24 Setting a Destination by Address ....................................................................................... 25 Setting a Destination by Intersection ................................................................................. 27 Setting a Destination by Point of Interest .......................................................................... 28 Selecting a POI Alphabetically.......................................................................................... 29 Selecting a POI By Distance.............................................................................................. 30 Selecting a POI By City..................................................................................................... 31 Setting a Destination From the Favorites Location List ..................................................... 32 Setting a Destination from the Recent Destinations List..................................................... 33 Managing the Destination and Route................................................................................. 33 Entering a Detour ............................................................................................................. 34 Entering Stopovers ............................................................................................................ 35 Clearing a Selected Destination ........................................................................................ 36
4.2.1. 4.2.2. 4.2.3. 4.2.4. 4.2.5. 4.2.6. 4.2.7. 4.2.8. 4.2.9. 4.2.10. 4.2.11. 4.2.12. 4.3.
NAVIGATING THE VEHICLE ............................................................................................................................. 36
Page 1
4.3.1. 4.3.2. 5. 6. 6.1. 6.2.
Using Day vs. Night Display.............................................................................................. 37 Viewing the Route List....................................................................................................... 38
TECHNICAL SUPPORT ................................................................................................................................ 38 APPENDIX ...................................................................................................................................................... 39 FCC COMPLIANCE.......................................................................................................................................... 39 SYSTEM SPECIFICATIONS ................................................................................................................................ 40
Page 2
1.
Introduction
1.1. What is in the Box?
The navigation System box includes the following items: 1. NAVIGATION 2. GPS Receiver 3. In-Car power cable 4. Air Suction Mount 5. USB Cable 6. CD including: l l l l Navigation application(Desktop application) Microsoft ActiveSync CD User's Manual U.S. and Canada map data.
7. Remote Control (Optional)
1.2. System Requirements
Desktop or Laptop PC system requirements include: Windows 2000 or XP operating system. Windows 98 in not recommended. 266 MHZ Intel Pentium® II microprocessor with MMXTM or equivalent. 64 MB RAM. 80 MB available hard drive space. CD ROM drive.
Page 3
1.3. Downloading Map
1.3.1. Downloading Map via NAVIGATION
* When downloading map to an internal storage memory or SD card via Navigation for the first time.
FOR INTERNAL MEMORY INSTALLATION CHECK LIST: * Installation Requirements: NAVIGATION USB Cable ActiveSync CD Installation & Map CDs
1. Insert Installation CD (CD 1) into your PC.
2. Map Loader setup program will start automatically. Follow the instructions.
3. When the Map Loader program installation is completed, click "Finish"
Page 4
4. Map Loader program will be launched automatically.
5. Close Map Loader program, and remove setup CD.
Page 5
6. Insert ActiveSync Installation CD into your PC.
7. Follow the ActiveSync Installation. Click "Next" until you get to "Get Connected" screen.
Page 6
8. Once ActiveSync installation is completed, you will see the "Get Connected" screen. DO NOT CLICK "NEXT".
Page 7
9. Connect your navigation to your USB port using the USB cable provided. Please wait while your PC recognizes the connection of THE navigation via USB. It may take up to 30 seconds.
NOTE: Once navigation is recognized by PC, you will see following screens.
Page 8
Page 9
Let Windows search for the best driver. If needed, the driver files are located in: D:\(Your CD Drive) l If Windows asks for specific drive location, select the current CD-Rom drive and click "OK".
10. If the navigation is successfully installed in your PC, the "Setup a Partnership" screen will automatically appear. Select "NO".
*Important: select "NO"
Page 10
l
Make sure you see the "Connected" screen.
Page 11
11. Execute the software by double clicking on the Map Loader icon ( Desktop.
) located on the
12. Select the desired map and download to the internal memory.
Page 12
13. Enjoy your drive.
1.3.2. Downloading Map via SD card reader
* When downloading map to a blank SD card via SD card reader for the first time.
FOR SD CARD INSTALLATION CHECK LIST: * Installation Requirements: NAVIGATION Installation & Map CDs SD Card Reader (Not included) SD Card (Not included)
*NOTE: if you are using a full map version navigation system, you do not have to install the software in your PC.
1. Insert Installation CD (CD 1) into your PC.
Page 13
2. Map Loader setup program will start automatically. Follow the instructions.
3. When the Map Loader program installation is completed, click "Finish"
4. Map Loader program will be launched automatically. You can also execute the
Page 14
software later by double clicking on the Map Loader icon (
) located on the Desktop.
5. Insert a SD card into SD card reader. Select and download maps to SD card.
Page 15
6. Inserting the SD card to your navigation, and enjoy your drive. (Refer "HARDWARE INSTALLATION GUIDE")
1.4. Navigation hardware installation
1. Installing navigation in the Car l Navigation can be installed on any glass surface. We recommend that you install navigation on the windshield below the center, between the driver seat and passenger seat. l When the suction cup of the navigation holder is placed into position, firmly push into the switch, which will lock the holder in place.
Page 16
2. Installing the GPS Antenna
Locate the input/output area on the backside of the navigation unit. 3. Installing the Cigarette Jack Connector
4. Sliding the navigation into the holder
Page 17
5. Turning power on/off l Once the power is turned on, wait for a couple of seconds and then the WARNING sign will appear as follows:
l
When the warning sign has appeared, read the following message and proceed by tapping the "OK" button.
2.
Checking GPS
When you first use navigation unit, it can take from five to fifteen minutes to receive a satellite signal. Thereafter, it should take approximately 90 seconds to receive signals. The GPS Info screen displays.
Page 18
3.
Getting Acquainted with Navigation
System
When you start navigation System, the downloaded map displays in Map View. This provides an expanded view of the map area around the vehicle location. If you have a GPS signal, the map defaults to the current location.
If you do not have a GPS signal, the map defaults to the last location. The vehicle icon displays as a green, yellow, or red arrow on the map. The color indicates the number of available satellites. At the bottom of the map is the vehicle location.
Page 19
To see detailed information, for the vehicle location, do one of the following: l l Tap on the location description at the bottom of the map. Tap on the map location and select Info from the Pop Up menu.
3.1. Moving Around the Map
You can tap the pointer on the map and drag it in the direction you want it to move: up down, right or left. When you remove the pointer from the map, it centers in on the selected location. This lets you have considerable control over your viewing area.
3.2. Using Menus
3.2.1. Main Menu
Page 20
Options Destination
Description Sets the destination by address, intersection, points of interest, favorite locations, or recent locations.
Route Options Simulation Display Options Return to Map
Manages your route preferences. Starts/stops the current routing simulation. Sets the map orientation, screen color on the navigation unit, automatic or manual guidance, and the display of POI icons. Displays an expanded view of the map area around the vehicle location.
GPS Info
Displays GPS status information.
3.3. Setting Options
Through navigation System, you can set the following preferences: l l Map Display View. Routing Options.
3.3.1.
Map View
1. To display the map in Map View, tap the Menu button > Return to Map icon. The Map
Page 21
View screen displays.
2. From the Display Options screen select a map orientation, as follows: l l Heading Up to automatically orient the map in the direction of vehicle travel. North Up to maintain the map in a North/South position.
3.3.2.
Map View Modes
Page 22
3.3.3.
Setting Route Options
Route methods: l l l l Ferries : l l Include to include ferries in the route. Exclude to omit ferries from the route. Quickest Route to calculate a route with minimum travel time. Shortest Route to calculate a route with minimum travel distance. Major to include major roads, such as highways. Local for local streets.
Toll roads option: l l Include to include toll roads in the route. Exclude to omit toll roads from the route.
Carpool lanes: l l Include to include carpool lanes in the route. Exclude to omit carpool lanes from the route.
Page 23
4.
Using The Navigation System
The calculated route for a destination displays in blue on the map. If you miss a turn in the route, navigation system recalculates the route and briefly displays "Recalculating Route" on the map display.
4.1. Entering a Start Location
The navigation system defaults to the current location as the starting point for route calculation, as specified by the GPS signal. You c ...
