Vacu-CellTM System Rectangular Perfusion Chamber, Large Window Model RPC-LW The Model RPC-LW perfusion chamber uses two rectangular coverslips to form a perfusion chamber. Dual o-rings on the top of the chamber body and dual o-rings on the bottom securely hold two 48 x 65 mm coverslips in place. Each coverslip is held in place using a separate vacuum port, so they can be used independently. When the Model RPC-LW is used with two coverslips, a rectangular chamber is formed with the two coverslips spaced by approximately 0.24 inches (6.1 mm). The total volume in the observation window is 7.54 ml. The observation window measures 1.2 x 1.6 inches (30.5 x 40.6 mm). Inlet and outlet perfusion ports direct fluid along the bottom edge. The perfusion ports can be configured for use with 1/16 inch OD tubing (shown), with 1/8 inch OD tubing, or with hose barb connectors. This chamber is available in black anodized aluminum that is coated with parylene for biological compatibility. A port for a temperature sensor is provided. Temperature is controlled using a heated microscope stage adapter. Top and bottom vacuum ports 48 x 65 mm coverslip (bottom view, without bottom coverslip) Model VC-RPC-LW Model VC-RPC-LW (top view) Model Numbers Model VC-RPC-LW (sectioned view) Large Window RPC, Black Anodized Aluminum VC-RPC-LW-BA Rectangular 48 x 65 mm No. 1 Coverslips, 1 Box VC-48x65CS-1 VC-RPC-LW-ORINGS Replacement O-rings for RPC-LW, 5 Sets C&L Instruments, Inc. Patent Pending www.fluorescence.com 717-564-9491 ...