Vacu-CellTM System Rectangular Perfusion Chamber, Thin Window Model RPC-TW This Perfusion Chamber uses two rectangular coverslips to form a thin perfusion chamber. Two sets of dual o-rings on the bottom of the chamber body securely hold a 24 x 40 mm (upper) and a 48 x 65 mm (lower) coverslip in place. Each coverslip is held in place using a separate vacuum port, so they can be used independently. The observation window measures 0.44 x 1.04 inches (11.2 x 26.4 mm). When the Model RPC-TW is used with two coverslips, a rectangular laminar flow chamber is formed with the two coverslips separated 100 microns, creating a thin laminar flow chamber. Inlet and outlet perfusion ports direct fluid flow from one end to the other between the two coverslips in a laminar fashion. Either the upper or lower coverslip can be used without the other to fashion an open chamber configuration. This chamber is available in black anodized aluminum that is coated with parylene for biological compatibility. A port for a temperature sensor is provided. Temperature is controlled using a heated microscope adapter. Top and bottom vacuum ports The observation window measures 0.44 x 1.04 inches (bottom view, without coverslips attached) Model VC-RPC-TW Model VC-RPC-TW (top view) Model Numbers VC-RPC-TW-BA VC-48x65CS-1 VC-24x40CS-1 VC-RPC-TW-ORINGS Thin Window RPC, Black Anodized Aluminum Rectangular 48 x 65 mm No. 1Coverslips, 1 Box Rectangular 24 x 40 mm No. 1Coverslips, 1 Box O-rings for RPC-TW, 5 Sets Model VC-RPC-TW (sectioned view) C&L Instruments, Inc. www.fluorescence.com 717-564-9491 Patent Pending ...