User manual FOSSIL WRIST NET

Reference Guide English - page 1 Français - page 41 1 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Button Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Signal Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Status Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using the Time Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Receiving the Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Choosing a Watch Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Downloading a Watch Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using the Chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Starting, stopping, and resetting the chronograph. . . . . . . . . . . . . . . 12 Recording laps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Setting the first alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Setting the second alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turning the alarm on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Dismissing the alarm notification. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Using the Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Starting, stopping, and resetting the timer. . . . . . . . . . . . . . . . . . . . . 17 Dismissing the timer notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2 About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing Watch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Sound Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turning the Radio On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Transition Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Time Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Date Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Units Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Time Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking Watch Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turning the Watch On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyright/Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Part 15 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 20 20 21 22 24 24 25 25 25 26 26 27 28 34 35 35 39 39 40 3 Welcome Ready, Set, Go! Wherever life takes you, your new FOSSIL® WRIST NETTM watch keeps you informed. When you sign up for the MSN® Direct service, you choose exactly which information you want to receive on your watch. This dynamic wireless technology discreetly displays the information that matters most to you. With a quick glance at your wrist, stay informed about news, weather, sports and more, and receive personal messages and appointment reminders. MSN Direct-ready watches are every bit as fun as they are informative. Enjoy making fashion statements with different watch faces and customizing your watch to fit your lifestyle. To learn more about your new watch and how to use it, follow the instructions in this guide. Getting Started To get acquainted with your new watch and learn about channels, modes, signal coverage, and status icons, keep reading. If you haven't already done so, follow the steps in the Quick Start Guide to charge your watch, activate the MSN Direct service at www.direct.msn.com/go, and personalize the content you want to receive. 4 Button Reference PREVIOUS Go back one screen Chrono/Timer mode: start, stop, continue Alarm mode: turn on, turn off, change value Settings mode: scroll up menu, change value Activate the light LIGHT ENTER Switch channels View current mode CHANNEL View a channel, mode, or detail screen Delete a message or news story Watch face: view date and seconds Alarm/Settings mode: accept a selection NEXT Go forward one screen Chrono mode: record laps, reset Alarm/Timer mode: set, reset, change value Settings mode: scroll down menu, change value 5 Channels The information on your watch is organized by channel. Similar to the channels on your television set, you see different types of content - such as news and weather - when you switch channels on your watch. When you activate the MSN Direct service, you select which channels to display on your watch. Each channel appears on the watch screen with an icon and the name of the channel. · To view the Time channel from anywhere on your watch, press and hold Channel. · To view the next channel on your watch, press Channel again. · To display the contents of the current channel, release Channel. Modes Each channel has one or more modes. For example, the Time channel includes the Face mode, the Chrono mode, the Alarm mode, the Timer mode, and the Settings mode. The name of the current mode appears on the watch screen. · To view the current mode, press Channel once. · To view the next mode within that channel, press Next. 6 Signal Coverage The MSN Direct service is delivered over a wireless network that is based on FM radio broadcast signals. Your watch indicates the strength of the broadcast signal by displaying a signal strength icon at the top of the screen in Glance mode, or in the Watch Info mode under the Settings mode (see "Changing Watch Settings" later in this guide). Even at low signal strength, your watch should receive information. Signal strength can vary based on your location. Sometimes topography (hills, valleys), building structure, or nearby electronics can interfere with the broadcast signal that your watch uses to receive information. The network sends two types of information to your watch - broadcast and personal. Broadcast information - such as news stories and current temperatures - is sent to every watch with MSN Direct, but only the information that you want to see is actually captured by your watch. Regardless of where you travel in North America or Canada, as long as you are within an MSN Direct coverage area, you should receive broadcast information. Your personal information - such as your messages and calendar appointments is encrypted with a unique key to help maintain your privacy. You receive personal information when you are within range of your home coverage area. Your home coverage area is the metropolitan area where you live. For more information about your home coverage area, including what to do when you travel, go to the MSN Direct Web site at www.direct.msn.com and click the Help link. 7 Status Icons Your watch displays various icons. On most watch faces these icons appear in the upper right corner of the display. The following table describes each icon. Icon Description New Message: Indicates a message has arrived that is unread. Battery Charging: Indicates that the battery is currently charging. Battery Low: Appears when the battery level gets down to 30% charge remaining. You need to charge the watch soon. Alarm On: Indicates that one of the alarms is set and will sound at the appropriate time. Chrono Running: Indicates the chronograph (also known as a stopwatch) is currently running. Timer Running: Indicates that the timer countdown is currently running. Signal Strength: Indicates the strength of the broadcast signal that the watch is receiving. · A full signal is indicated by . · No signal is indicated by and means that the watch has been out of your home coverage area longer than 10 minutes and cannot find a signal. · means that the watch may not be receiving your personal information. This can happen before the signal confirms the home coverage area for your watch, or if you travel out of your home coverage area. · means that the watch radio is off and the watch cannot receive a broadcast signal. 8 Using the Time Channel Your watch comes with three channels - Time, Messages, and Calendar - that are available for use even before you activate the MSN Direct service. The Time Channel is fully operational and ready to go. The Messages and Calendar channels have limited capabilities until you activate and personalize MSN Direct. The Messages channel is available for emergency and public service announcements, and the Calendar channel includes a month view calendar. Once you activate MSN Direct, you can receive messages from others, view personal appointments, and view an events calendar for the things that interest you, such as sports schedules, financial events, and local cultural events. You can also subscribe to a number of additional channels, such as news, weather, stocks, and sports. This guide provides instructions for using the Time channel. For instructions on using the other channels - including Messages and Calendar - go to the MSN Direct Web site at www.direct.msn.com and click the Help link. Note Before you activate MSN Direct, you also see the Register channel on your watch. This is a temporary channel that displays the information you need to activate the service, including the MSN Direct Web site address and your watch ID. The watch ID is a number that uniquely identifies your watch so that you receive your personal messages and information. The Register channel disappears from your watch when you activate MSN Direct. 9 Receiving the Time When your watch receives a broadcast signal, it should automatically receive the correct time from an atomic clock. This happens even if you have not yet activated the MSN Direct service. As long as your watch is receiving a signal, you do not need to set the time. The time is accurate to a few thousands of a second and automatically adjusts for daylight savings time and leap years. In addition, your watch automatically changes to different time zones as you travel from place to place. Note When you turn the watch on, it may take a few minutes to receive the time from an atomic clock. If your watch is not receiving a signal, you can manually set the time. You can also change the time display from a 12 hour clock to a 24 hour clock, and you can override the automatic time zone setting. For details, see "Changing Watch Settings" later in this guide. Choosing a Watch Face You can change the appearance of your watch to reflect your personal style, environment, or mood. To change the face that displays on your watch: 1. Press and hold Channel to go to the Time channel. 2. Wait for the current watch face to appear. 3. Press Previous or Next until you find a watch face you want to display. Note For some watch faces, you can press Enter to view the date and seconds. 10 Downloading a Watch Face When you personalize the MSN Direct service, you can sign up to receive new watch faces. When you receive a new watch face, the following message appears: To view the new watch face and decide whether to keep it: 1. When you receive the message, press Enter. The new watch face appears for a few seconds. 2. Do one of the following: · To keep the new watch face, press Next (Yes). · To discard the new watch face, press Previous (No). Note You can keep just one downloaded watch face at a time on your watch. If you decide to keep a watch face, the last watch face that you downloaded is removed. 11 Using the Chronograph With the chronograph (commonly known as a stopwatch), you can time events such as your daily run - and record lap times. You can start the chronograph, stop it, and then restart it without having to reset. You can record up to 99 laps. Starting, stopping, and resetting the chronograph To use the chronograph: 1. Press and hold Channel to go to the Time channel. Wait for the watch face to appear. 2. Press Channel to go to the Face mode. 3. From the Face mode, press Next to go to the Chrono mode. The chronograph appears. 4. To start the chronograph, press Previous (Start). Minutes and seconds appear as large numbers. Hours appear as small numbers above the minutes (on the left) and hundredths of seconds appear as small numbers above the seconds (on the right). 5. To stop the chronograph, press Previous (Stop). 6. Do one of the following: · To continue using the chronograph and add to the event time, press Previous (Continue). · To stop using the chronograph and reset the event time to 00:00, press Next (Reset). 12 Note When you start the chronograph, the number for hundredths of seconds appears for 10 seconds and then disappears from the watch face. The number runs in the background and displays when you stop the chronograph. Recording laps To record laps while timing an event: 1. While the chronograph is running, press Next (Lap). The view freezes for a moment so that you can read the lap value. After a few seconds, the view resumes with the chronograph still running. 2. Repeat step 1 for each lap you want to record. After you stop the chronograph, press Enter to review the lap values. 13 Using the Alarm With an alarm, you can set a time of day when you want a watch sound to notify you. Your watch includes two alarms that work separately. For example, you can set one alarm for when you want to get up in the morning and one alarm for when you need to leave for your carpool. Setting the first alarm To set the first alarm: 1. Press and hold Channel to go to the Time channel. Wait for the watch face to appear. 2. Press Channel to go to the Face mode. 3. From the Face mode, press Next twice to go to the Alarm mode. The first alarm appears. 4. To set the hour, press Next (Set), press Previous or Next until you see the hour you want, and then press Enter. 5. To set the minutes, press Previous or Next until you see the minutes you want, and then press Enter. Note To move up or down in increments of 5 minutes instead of 1 minute, press and hold Previous or Next. 6. If you are using the 12 hour clock, press Next to choose either am or pm, and then press Enter. 7. To choose the method of alarm notification, press Previous or Next until you see the icon ( ), and then press Enter. The alarm is set and is automatically turned on. 14 Setting the second alarm · From the Alarm mode, press Enter to go to the second alarm, and then follow the instructions for setting the first alarm. Turning the alarm on and off The alarm is automatically turned on when you set it. A small alarm clock displays on the watch face to indicate the alarm is turned on. The alarm sounds every 24 hours until you turn it off. To turn the alarm off: 1. From the Alarm mode, press Previous (Turn off). 2. To turn the alarm back on, press Previous (Turn on) again. Dismissing the alarm notification Depending on how you set up the alarm, your watch emits a sound when the alarm goes off. The alarm plays for 15 seconds and a notification message appears on your watch face. The message automatically disappears when the sound stops. You can dismiss the alarm before the sound finishes by pressing any button on your watch. 15 Using the Timer With the timer, a watch sound notifies you after a specific amount of time elapses. By default, the timer is set to 5 minutes. Setting the timer To set the timer: 1. Press and hold Channel to go to the Time channel. Wait for the watch face to appear. 2. Press Channel to go to the Face mode. 3. From the Face mode, press Next three times to go to the Timer mode. The Timer appears. Minutes and seconds appear as large numbers. Hours appear as small numbers above the minutes (on the left). 4. To set the minutes, press Next (Set), press Previous or Next until you see the hour you want, and then press Enter. Note To move up or down in increments of 5 minutes instead of 1 minute, press and hold Previous or Next. 5. To set the seconds, press Previous or Next until you see the seconds you want, and then press Enter. Note To move up or down in increments of 5 seconds instead of 1 second, press and hold Previous or Next. 6. To set the hours, press Previous or Next until you see the hours you want, and then press Enter. 16 Starting, stopping, and resetting the timer To use the timer: 1. From the Timer mode, press Previous (Start) to start the timer. A small hourglass appears. 2. To stop the timer, press Previous (Stop). 3. Do one of the following: · To continue the timer countdown from where you stopped it, press Previous (Continue). · To stop using the timer and reset it to the most recent setting, press Next (Reset). Dismissing the timer notification When the timer countdown reaches zero, your watch emits a series of beeps and displays a notification message on your watch face. The message appears for 15 seconds. You can dismiss the timer notification message sooner by pressing any button on your watch. Note If you turned off the sound setting, you only see the notification message. Your watch does not emit the beep tones. 17 About the Battery Your FOSSIL® WRIST NETTM watch is feature rich and has numerous functions. Because of this, the watch uses more battery power and must be recharged periodically, much like other devices such as cell phones or walkie-talkies. Your watch should function fully for at least 2 days on a single charge. The amount of time the battery lasts between charging sessions varies with a number of factors, including which watch face you are using, which channel the watch displays most of the time, the strength of the broadcast signal, and the amount of information that you receive on the watch. If you want to extend the battery life between charging sessions, follow these tips: · Use a simple watch face. Simple watch faces, such as those with traditional clock faces, take less battery power than elaborate watch faces, such as those that use animation. · Stay on the Time channel unless you are viewing content on another channel. Some channels rotate new information through the screen continually, even when you are not looking at them, which takes battery power. · Turn the sound off. · Turn the radio off. If you are outside of a reception area or not interested in getting information, you can turn the radio off and the watch stops looking for a broadcast signal. Remember to turn the radio back on. · Turn the watch off. If you aren't wearing the watch, you can turn it off. The watch maintains your current information for a long time, but the watch screen is blank and the watch receives no additional information. 18 When the watch battery is fully charged, it is at 100%. When the watch battery is fully discharged, it is at 0%. Your watch is fully functional from 100% down to a 20% charge. The following table describes how the watch responds at different battery charge levels. Battery charge remaining 30% 20% Watch response The low battery indicator ( ) appears. A notification message appears. The watch goes into low battery mode. The watch radio turns off and stops receiving new information. The watch switches to the Time channel after 5 minutes. The watch face may switch to one that uses less battery power. The watch turns off and the screen is blank. The watch conserves the contents of its memory. 10% If your watch has a remaining battery charge of 30% or less, you should charge the watch as soon as possible. Charging the watch takes up to 4 hours. To charge your watch: 1. Connect the power cord to the charger. Plug the power cord into an electrical outlet. 2. Rotate the charger arm into the open position. 3. Be sure to close the watch clasp completely. This allows your watch to receive your information. 4. Place your watch on the charger arm. 5. Make sure that the pushers on the watch match the diagram on the charger arm. 19 6. Wait 2-4 hours for your watch to fully charge. 7. A "Charged" message will display when it is fully charged. Changing Watch Settings You can change a number of watch settings including sound, time zone, date format, time offset, and transitions. The settings are located in the Settings mode of the Time channel. To go to the list of watch settings: 1. Press and hold Channel to go to the Time channel. Wait for the watch face to appear. 2. Press Channel to go to the Face mode. 3. From the Face mode, press Previous once to go to the Settings mode. The list of settings appears. 4. Scroll thorough the list by pressing Previous or Next. 5. To select an item, press Enter. Changing the sound setting With the sound setting, you can indicate if you want your watch to emit sound and, if so, for which events. If you select All On, sound emits for all events that use sound. For example, button presses, message alerts, and notifications. 20 If you select Alerts Only, sound emits only when there is an alert. If you select All Off, no sound emits for any events. However, you will still hear sound for any alarms that you have set. To change the sound setting: 1. From the Settings mode, press Next to scroll to Sound, and then press Enter. 2. Press Next until you find the sound setting you want, and then press Enter. Changing the time zone Because some watch faces can display dual time zones, you can set two time zones on your watch. When you enter the Time Zone setting, ZONE 1 appears in the upper-left corner. To switch to ZONE 2, press Enter. By default, the time zone is set to Auto-set and reflects the time zone that corresponds to the atomic clock that the watch is currently set to receive. This means that the time zone updates automatically as you move from place to place. For example, your watch displays the Pacific Time Zone when you are in San Francisco and the Eastern Time Zone when you are in New York. 21 If you want your watch to always display the time from one time zone, you can change from Auto-set to a specific time zone. For example, you may want to stay in your home time zone while on a trip, or you may take a trip to a location where there is not MSN Direct coverage. In this case, your watch stays in the specific time zone until you change it to another time zone or back to Auto-set. To change the time zone: 1. From the Settings mode, press Next to scroll to Time Zone, and then press Enter. 2. Press Next until you find the time zone you want, and then press Enter. Setting the time If you are receiving a broadcast signal and the watch radio is turned on, you cannot set the time and date. Your watch automatically receives the correct time from an atomic clock. If you enter the Set Time setting when it is not available, you receive the following message: 22 If you enter the Set Time setting and see the date and time display, your watch is either not receiving a broadcast signal, or the watch radio is off. If so, you can set the time and date manually. To set the time and the date: 1. From the Settings mode, press Next to scroll to Set Time, and then press Enter. 2. To set the hour, press Previous or Next until you see the hour you want, and then press Enter. 3. To set the minutes, press Previous or Next until you see the minutes you want, and then press Enter. Note To move up or down in increments of 5 minutes instead of 1 minute, press and hold Previous or Next. 4. If you are using the 12 hour clock, press Next to choose either am or pm, and then press Enter. 5. To set the month, press Previous or Next until you see the month you want, and then press Enter. 6. To set the day, press Previous or Next until you see the day you want, and then press Enter. 7. To set the year, press Previous or Next until you see the year you want, and then press Enter. Note Once your watch receives a broadcast signal again - either because you moved into an MSN Direct coverage area, or because the radio has been turned back on - the time you set is automatically replaced with the time from an atomic clock. 23 Turning the radio on and off At times, you may want to turn the watch radio off. For example, you may want to preserve the watch battery when you know that you will be out of range of the broadcast signal. By default, the radio is turned on. To turn the radio off: 1. From the Settings mode, press Next to scroll to Radio, and then press Enter. 2. Press Next to turn the radio off, and then press Enter. The no signal icon ( ) is displayed in the upper right corner of most watch views. Note If you turn the watch radio off, you won't receive any new information broadcast or personal - until you turn the radio back on. Any information that you received before you turned the radio off remains on your watch. Note You may be required to turn off your watch for airline flights. Changing the transition option In some of the watch channels, you can choose how the screen transitions when you move between screens by setting the Transition option. To change the transition option: 1. From the Settings mode, press Next to scroll to Transition, and then press Enter. 2. Press Next until you find the transition you want, and then press Enter. 24 Changing the time format With the Time Format setting, you can choose to display the time using the 12 hour clock or the 24 hour clock. To change the time format: 1. From the Settings mode, press Next to scroll to Time Format, and then press Enter. 2. Press Next to choose either 12 hr or 24 hr, and then press Enter. Changing the date format With the Date Format setting, you can choose to display the date by month first (June 16, 2003) or day first (16 June 2003). The date display uses this setting wherever it appears on your watch. To change the date format: 1. From the Settings mode, press Next to scroll to Date Format, and then press Enter. 2. Press Next to choose either mm.dd or dd.mm, and then press Enter. Changing the units setting With the Units setting, you can choose to display watch information in U.S. units (Fahrenheit, inches) or metric units (Celsius, centimeters). To change the units format: 1. From the Settings mode, press Next to scroll to Units, and then press Enter. 2. Press Next to choose either US or Metric, and then press Enter. 25 Setting the time offset Many people prefer to set their watch so that it runs a little fast. With the Time Offset setting, you can set your watch time ahead by 5, 10, or 15 minutes. You can use this setting, even while the time is being set automatically through the broadcast signal of an atomic clock. To set the time offset: 1. From the Settings mode, press Next to scroll to Time Offset, and then press Enter. 2. Press Next until you find the offset amount you want, and then press Enter. Checking watch information The Watch Info setting contains technical information about your watch and your MSN Direct service. You can use this setting to check the signal strength and battery life status of your watch. To view watch information: 1. From the Settings mode, press Next to scroll to Watch Info, and then press Enter. 2. Press Next and Previous to scroll through the watch information. 3. After you finish, press Enter to return to the Settings mode. 26 Turning the watch on and off If you are not using your watch, you can turn it off to preserve the battery life. When you do so, both the display and radio turn off, and the alarms and timers will stop. You can wake up the watch by pressing any button. If the battery is low, you need to put the watch back on the charger, but it wakes up automatically when it has enough charge to start. To turn the watch off: 1. From the Settings mode, press Next to scroll to Watch Off, and then press Enter. 2. Press Next. A Turn off watch? message appears. 3. Press Next (Yes). A Press any key to wake up message appears briefly, and then the watch screen goes blank. 27 Frequently Asked Questions Here are the most commonly asked questions about your FOSSIL® WRIST NETTM watch. For additional questions and answers, go to the Fossil Web site at www.fossil.com and click Customer Service. For questions about the MSN Direct service, go to the MSN Direct Web site at www.direct.msn.com and click the Help link. · How do I replace or recharge the battery in my watch? No need to replace the battery - your watch comes equipped with a rechargeable battery. To recharge the battery, follow the steps on pages 19 and 20. · How can I tell if my watch is getting reception? Check the signal strength icon, which is found in the upper-right corner of most watch views. A good signal is indicated by , which means your watch is getting reception and is receiving information. No signal is indicated by , which means you are outside an MSN Direct coverage area or you are temporarily in an area where reception is poor. means that the watch may not be receiving your personal information. This can happen before the signal confirms the home coverage area for your watch, or if you travel out of your home coverage area. means that the watch radio is off and the watch cannot receive a broadcast signal. Check the Signal strength percentage in Watch Info. For details, see page 8. 28 · How do I determine remaining battery life? Check the Battery life percentage in Watch Info. For details, see page 19 · How do I conserve battery life? For helpful tips about maximizing battery life, see page 18. · How do I set the time on my watch? As long as you are in an MSN Direct coverage area, you shouldn't have to set the watch time. Your watch acquires the current local time automatically from an atomic clock. This may take a few minutes to acquire initially. If the Set Time setting displays Time Set By Network, then you are in an MSN Direct coverage area. If you are outside of an MSN Direct coverage area, you can manually set the time and date on your watch. For details, see page 23. · What happens when I activate the MSN Direct service? Your watch receives the personalized information you selected on the MSN Direct Web site. The following actions take place: 1. Your watch receives a "Welcome" confirmation message. 2. The Register channel disappears from your watch. 3. Your watch starts receiving channel content, such as news stories and local weather information. · How will I know when my watch is activated? You will receive a "Welcome" confirmation message on your watch. You will also receive a confirmation e-mail within 24 hours. 29 · Can I adjust the volume on my watch? No. · Can my watch communicate with other watches enabled with MSN Direct? No. · Is my watch waterproof? No. Your watch is not meant to be submerged in water. However, it will withstand a little rain while being worn. · Where do I send my watch for repair service? In the event that you experience a problem with your watch, please call Fossil Customer Service at (toll free) 1-866-375-4832. For additional information, go to our Web site at www.fossil.com/tech. · My watch doesn't show the correct time. What should I do? When you first turn on your watch, the time reverts to 12:00 A.M. while the watch attempts to receive the correct local time from a nearby broadcast signal. When the watch receives a signal, the time automatically updates to the current local time. The MSN Direct coverage area includes most major metropolitan areas throughout the United States and Canada. If your watch is inside any of these coverage areas, it should automatically receive the correct local time, unless the watch radio is turned off. By default, the radio is turned on. If your watch is outside of a coverage area, it will not receive the 30 correct time until you return to the coverage area. For details, see page 21. For more information about coverage areas, go to the MSN Direct Web site at www.direct.msn.com and click the Help link. Sometimes topography (hills, valleys), building structure, or nearby electronics can interfere with the broadcast signal that your watch uses to receive the correct local time. When that happens, your watch experiences a delay in receiving the correct time. If your watch is exactly one or more full hours away from the correct time, it's possible that your Time Zone settings are set to a specific time zone. Make sure that ZONE 1 is set to Auto-set. For details, see page 22. If your watch time is ahead by exactly 5, 10, or 15 minutes, it is likely that the Time Offset setting is set. For details, see page 26. If you are outside of the MSN Direct coverage area, you can manually set the time on your watch. For details, see page 23. · My watch battery died before I could recharge it. What should I do? Don't worry! Just place your watch on the charger and your watch begins to charge. All of your information comes back online as soon as the watch has enough battery power. 31 · My watch isn't responding to any button presses. What should I do? Turn your watch off and then turn it back on by completing the following steps: 1. Simultaneously press and release Next, Enter, and Light. This turns the watch off. 2. Wait a few seconds, and then simultaneously press and release Previous, Enter, and Next. It will take several seconds for the watch to power on, and then a watch face appears. If your watch still doesn't respond to any button presses, call the Fossil Customer Service at (toll free) 1-866-375-4832. · I activated the MSN Direct service, but my watch isn't receiving any of the information I selected. What should I do? You may not have received the activation and configuration message that was sent when you activated the service. This can happen if you were outside an MSN Direct coverage area, or if you were temporarily in an area where reception is poor. You can instruct the MSN Direct service to resend the configuration message by going to www.direct.msn.com and clicking the link to resend the configuration message. 32 · My watch hasn't received any new information in a day or more. What should I do? The MSN Direct coverage area includes most major metropolitan areas throughout the United States and Canada. If your watch is inside any of these coverage areas, it should automatically receive new broadcast information (news stories, current temperatures). If your watch is outside of a coverage area, it doesn't receive any new broadcast information until you return to the coverage area. For more information about coverage areas, go to the MSN Direct Web site at www.direct.msn.com and click the Help link. If you leave your home coverage area and travel to another MSN Direct coverage area, your watch will not receive personal information (personal messages, calendar appointments) unless you go to the MSN Direct Web site at www.direct.msn.com and set up a travel schedule. Sometimes topography (hills, valleys), building structure, or nearby electronics can interfere with the broadcast signal that your watch uses to receive information. 33 Getting Help For additional help with your FOSSIL® WRIST NETTM watch, please call Fossil Customer Service at (toll free) 1-866-375-4832 or go to our Web site at www.fossil.com/tech. For help with the MSN Direct service, go to the MSN Direct Web site at www.direct.msn.com and click the Help link, or contact MSN Customer Support at 1-866-658-7032 (within the United States). For deaf or hard-of-hearing customers, call 1-800-877-9580 (within the United States) for technical support or 1-866-271-7577 (within the United States) for accounts and billing support. 34 Terms and Conditions LIMITED 90 DAY WARRANTY* HARDWARE: Fossil, Inc. ("Fossil") warrants to the original end user ("Customer") that new Fossil branded products will be free from defects in workmanship and materials, under normal use, for ninety (90) days from the original purchase date. EXCLUSIONS: This warranty excludes (1) physical damage to the surface of the product; (2) replacement or repair of the strap, bracelet, or battery; (3) water-related damage; (4) damage caused by misuse, neglect, improper installation or testing, unauthorized attempts to open, repair, or modify the product, or any other cause beyond the range of the intended use; (5) damage caused by accident, fire, power changes, other hazards, or acts of God; or (6) use of the product with any non-Fossil device or service if such device or service causes the problem. Accessory products are not covered under this Limited Warranty, nor are the SPOT service or any related service provided by Microsoft. This warranty is limited to hardware only. REPLACEMENT: Products or parts may be new or reconditioned or comparable versions of the defective item. Fossil warrants any replaced or repaired product, part, or software, for a period of forty-five (45) days from shipment, or through the end of the original warranty, whichever is longer. Customer must provide dated proof of purchase (as stated below) in order to receive warranty protection through the end of the original warranty period. 35 OBTAINING WARRANTY SERVICE: Customer must contact Fossil Technical Support within the applicable warranty period to obtain warranty or non-warranty service. You may contact them at the following number 866-375-4832. Dated proof of original purchase, or a legible copy thereof, will be required. Fossil reserves the right not to service an item if a proper receipt, or copy thereof, is not provided. Do not send in original packaging as it will not be returned. We highly recommend you insure your parcel shipment since you are liable for getting the item to our Service Center. You are also responsible for adequately protecting the watch during shipment. Fossil is not responsible for replacing product lost in-transit. Fossil is not responsible for Customer products received without a warranty service authorization and may be rejected. Repaired or replacement products will be shipped to Customer at Customer's expense. All products or parts that are replaced become the property of Fossil. Fossil shall not be responsible for Customer's software, firmware, information, or memory data contained in, stored on, or integrated with any products returned to Fossil for repair, whether under warranty or not. WARRANTIES EXCLUSIVE: THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, CORRESPONDENCE WITH DESCRIPTION, AND NONINFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. 36 LIMITATION OF LIABILITY: FOSSIL SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE OR USE OF THIS PRODUCT, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR ANY OTHER THEORY, EVEN IF FOSSIL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FOSSIL'S ENTIRE LIABILITY SHALL BE LIMITED TO REPLACEMENT, REPAIR, OR REFUND OF THE PURCHASE PRICE PAID, AT FOSSIL'S OPTION. DISCLAIMER: Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages so the above limitations and exclusions may be limited in their application to you. When implied warranties may not be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights; you may have other rights that may vary depending on local law. Your statutory rights are not affected. GOVERNING LAW: This Limited Warranty shall be governed by the laws of the State of Texas, U.S.A., and by the laws of the United States, excluding their conflicts of laws principles. The United Nations Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from application to this Limited Warranty. 37 Metro Service Center 10615 Sanden Drive Dallas, Texas 75238 United States of America www.fossil.com/tech Oct, 2003 *This warranty is subject to change. Please visit our website for the most current version of our warranty. 38 Limitation of Liability FOSSIL MAKES NO WARRANTY RESPECTING THE MERCHANTABILITY OF THE PRODUCT OR ITS SUITABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE OR RESPECTING INFRINGEMENT. BUYER SHALL NOT IN ANY EVENT BE ENTITLED TO, AND FOSSIL SHALL NOT BE LIABLE FOR, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE EVEN IF FOSSIL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BUYER'S RECOVERY FROM FOSSIL FOR ANY CLAIM SHALL NOT EXCEED BUYER'S PURCHASE PRICE FOR THE PRODUCT GIVING RISE TO SUCH CLAIM IRRESPECTIVE OF THE NATURE OF THE CLAIM, WHETHER IN CONTRACT, TORT, WARRANTY, OR OTHERWISE. Copyright/Disclaimer The copyright in all original material contained in this document is held by Fossil, Inc. and/or by the original creator of the material. Except as stated below, none of the material may be reproduced, distributed, republished, downloaded, displayed, posted, transmitted, or copied in any form or by any means, without the prior written permission of Fossil, Inc. and/or the copyright owner. Permission is granted to display, copy, distribute, and download the material solely for personal, noncommercial use provided that you make no modifications to the material and that all copyright and other proprietary notices contained in the material is retained. 39 Any permission granted herein terminates automatically without further notice if you breach any of the above terms. Upon such termination, you agree to immediately destroy any printed and/or downloaded materials. Any unauthorized use of any material contained herein may violate domestic and/or international copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes. All trademarks, service marks, logos, slogans, domain names, and trade names (collectively "Marks") contained herein are the property of their respective owners. Fossil, Inc. disclaims any proprietary interest in Marks other than its own. FCC Part 15 Compliance This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. 40 Guide de Référence Français 41 Sommaire Bienvenue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Par où Commencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Explication des Boutons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chaînes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champ de Diffusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Icônes d'État . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utilisation de la Chaîne Heure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Réception de l'Heure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Choix de l'Apparence du Cadran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Téléchargement de la Face du Cadran . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utilisation du Chronographe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Démarrage, arrêt et réinitialisation du chronographe . . . . . . . . . . . . . Chronométrage de tours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utilisation de l'Alarme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration de la première alarme . . . . . . . . . . . . . . . . . . . . . . . . . Configuration de la seconde alarme . . . . . . . . . . . . . . . . . . . . . . . . . . Activation et arrêt de l'alarme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Suppression de la notification d'alarme . . . . . . . . . . . . . . . . . . . . . . . Utilisation du Minuteur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration du minuteur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Démarrage, arrêt et réinitialisation du minuteur. . . . . . . . . . . . . . . . . Suppression de la notification du minuteur . . . . . . . . . . . . . . . . . . . . 42 44 44 45 46 46 47 48 49 50 50 51 52 52 53 54 54 55 55 55 56 56 57 57 A Propos de la Pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement des Paramètres de la Montre . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement du Paramètre Son . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement de la Zone Horaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Réglage de l'Heure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mise en Marche et à l'Arrêt de la Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement de l'Option de Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement du Format Horaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement du Format de Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changement du Paramètre d'Unités. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration du Décalage Horaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vérification des Informations de la Montre . . . . . . . . . . . . . . . . . . . . . . . . Mise en Marche et à l'Arrêt de la Montre . . . . . . . . . . . . . . . . . . . . . . . . . . Foire Aux Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Obtention d'Aide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Termes et Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limites de Responsabilité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Droits d'Auteur/Décharge de Responsabilité . . . . . . . . . . . . . . . . . . . . . . . Compatibilité avec FCC Section 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 60 60 61 62 64 64 65 65 65 66 66 67 68 74 75 75 79 79 80 43 Bienvenue À vos marques, prêt, partez ! Que vous vous envoliez ici ou ailleurs, avec votre nouvelle montre FOSSIL® Wrist NetTM, vous êtes branché. Lorsque vous souscrivez au service MSN® Direct, vous choisissez exactement les informations que vous voulez recevoir sur votre montre. Cette technologie sans fil dynamique affiche discrètement les informations qui vous tiennent à coeur. D'un seul coup d'oeil sur le cadran, restez au courant sur les actualités politiques, sportives, sur les bulletins météo et plus encore, recevez des messages personnels et des rappels de rendez-vous. En plus d'être informatives, les montres compatibles MSN Direct vous épateront de bien d'autres manières. Soyez à la mode et montrez-le en changeant l'apparence de votre montre et en la personnalisant pour qu'elle réponde à votre style de vie. Pour en savoir plus sur votre montre et savoir comment l'utiliser, il vous suffit de suivre les instructions figurant dans ce guide. Par où Commencer Pour vous familiariser avec votre montre et découvrir les chaînes, les modes, le champ de diffusion et les icônes d'état, continuez à lire les informations ci-dessous. Si vous ne l'avez pas encore fait, suivez les étapes du Manuel de Configuration Rapide pour charger votre montre, activer le service MSN Direct sur le site www.direct.msn.com/go et personnaliser le contenu que vous souhaitez recevoir. 44 Explication des Boutons PRÉCÉDENT Reculer d'un écran Mode Chrono/Minuteur : démarrer, arrêter, continuer Mode Alarme : activer, désactiver, changer de valeur Mode Paramètres : menu de défilement vers le haut, changer de valeur Activer la lumière LUMIÈRE ENTRÉE Changer de chaîne Afficher le mode actuel CHAÎNE Afficher un écran de chaînes, de modes ou de détails Supprimer un message ou un article d'actualité Face du cadran : afficher la date et les secondes Mode Alarme/Paramètres : accepter une sélection Avancer d'un écran Mode Chrono : chronométrer des tours, remettre à zéro Mode Alarme/Minuteur : régler, réinitialiser, changer de valeur Mode Paramètres : menu de défilement vers le bas, changer de valeur SUIVANT 45 Chaînes Les informations qui apparaissent sur votre montre sont classées par chaîne. Similaires aux chaînes de votre téléviseur, vous pouvez voir différentes rubriques, telles qu'actualités et bulletins météo, selon la chaîne que vous sélectionnez sur votre montre. Lorsque vous activez le service MSN Direct, vous sélectionnez quelles chaînes afficher sur votre montre. Chaque chaîne apparaît sur le cadran sous forme d'icône accompagné du nom de la chaîne. · Pour afficher la chaîne Heure depuis n'importe quelle zone de votre montre, appuyez sur Chaîne et maintenez enfoncé. · Pour afficher la chaîne suivante, appuyez à nouveau sur Chaîne. · Pour afficher le contenu de la chaîne en cours, relâchez le bouton Chaîne. Modes Chaque chaîne dispose d'un ou de plusieurs modes. La chaîne Heure comprend par exemple le mode Face, le mode Chrono, le mode Alarme, le mode Minuteur et le mode Paramètres. Le nom du mode couramment sélectionné apparaît sur le cadran. · Pour afficher ce mode, appuyez une fois sur Chaîne. · Pour afficher le mode suivant de cette chaîne, appuyez sur Suivant. 46 Champ de Diffusion Le service MSN Direct est acheminé sur un réseau sans fil basé sur les signaux de diffusion de radio FM. Votre montre indique la puissance du signal de diffusion en affichant une icône en haut de l'écran en mode Aperçu ou dans Infos sur la montre en mode Paramètres (voir «Changement des paramètres de la montre» plus loin dans ce guide). Même si la puissance du signal de diffusion est faible, votre montre devrait recevoir les informations. La puissance du signal peut varier selon l'endroit où vous vous trouvez. Il se peut que la topographie (collines, vallées), la structure du bâtiment dans lequel vous vous trouvez ou d'autres appareils électroniques, fassent interférence avec le signal de diffusion que votre montre utilise pour recevoir les informations. Le réseau envoie deux types d'informations à votre montre, des informations diffusées et d'autres personnelles. Les informations diffusées telles qu'actualités et bulletins météo sont envoyées à votre montre par le biais de MSN Direct, mais seules les informations que vous avez programmées pour être affichées sont chargées sur votre montre. Où que vous soyez aux États-Unis ou au Canada, du moment que vous êtes dans le champ de diffusion de MSN Direct, vous recevrez les informations diffusées. Vos informations personnelles, tels que messages et rendez-vous, sont cryptées à l'aide d'une clé unique pour vous aider à protéger votre vie privée. Vous recevez vos informations personnelles lorsque vous vous trouvez dans le champ de diffusion correspondant à votre lieu résidence. Ce champ de diffusion correspond à la zone métropolitaine dans laquelle vous vivez. Pour obtenir plus d'informations à ce sujet et savoir quoi faire lorsque vous êtes en voyage, connectez-vous au site Web de MSN Direct à l'adresse www.direct.msn.com et cliquez sur le lien Aide. 47 Icônes d'État Votre montre affiche diverses icônes. Sur la plupart des cadrans, ces icônes apparaissent dans le coin supérieur droit de l'affichage. Le tableau suivant décrit chaque icône. Icône Description Nouveau Message : Indique qu'un message vient d'arriver et qu'il n'est pas encore lu. Chargement de la Pile : Indique que la pile est en cours de chargement. Pile Presque Épuisée : Apparaît lorsque le niveau de la pile descend au-dessous de 30% de charge. Vous avez besoin de charger la pile dans les plus brefs délais. Alarme Active : Indique que l'une des alarmes est réglée et qu'elle sonnera à l'heure indiquée. Chrono en Marche : Indique que le chronographe est en marche. Minuteur en Marche : Indique que le compte à rebours du minuteur est en marche. Puissance du Signal : Indique la puissance du signal que la montre reçoit. · Une puissance maximale est indiquée par . · Le symbole signifie aucun signal, ce qui veut dire que la montre s'est trouvée hors de votre zone de couverture pendant plus de 10 minutes et qu'elle ne réussit pas à capter de signal. · signifie que la montre ne reçoit peut-être pas votre information personnelle. Cela peut arriver avant que le signal confirme la zone de couverture de votre montre ou si vous sortez de votre zone de couverture. · signifie que la radio de la montre est éteinte et que la montre ne peut pas recevoir de signal radio. 48 Utilisation de la Chaîne Heure Votre montre comprend trois chaînes, Heure, Messages et Calendrier, que vous pouvez utiliser avant d'activer le service MSN Direct. La chaîne Heure fonctionne complètement et n'a pas besoin d'être configurée. Les chaînes Messages et Calendrier ont des fonctionnalités limitées jusqu'à ce que vous activiez et personnalisiez MSN Direct. La chaîne Messages est disponible pour les annonces d'urgence et de services publics et la chaîne Calendrier comprend l'affichage d'un calendrier mensuel. Une fois que vous avez activé MSN Direct, vous pouvez recevoir des messages, afficher vos rendez-vous personnels et un calendrier des événements qui vous intéressent, tels que des événements sportifs, financiers ou culturels. Vous pouvez également souscrire à un certain nombre de chaînes supplémentaires, telles qu'actualités, bulletins météorologiques, bourse et sports. Ce guide vous fournit des instructions vous permettant d'utiliser la chaîne Heure. Pour obtenir des instructions sur l'utilisation d'autres chaînes, parmi lesquelles Messages et Calendrier, passez au site Web MSN Direct à l'adresse www.direct.msn.com et cliquez sur le lien Aide. Remarque Avant d'activer MSN Direct, vous voyez également sur votre montre la chaîne Souscrire. Il s'agit d'une chaîne temporaire qui affiche les informations dont vous avez besoin pour activer le service, parmi lesquels le site Web MSN Direct et votre ID de montre. L'ID de montre est un numéro qui identifie votre montre pour que vous receviez vos messages et informations personnelles. La chaîne Souscrire disparaît de votre montre lorsque vous activez MSN Direct. 49 Réception de l'Heure Lorsque votre montre capte un signal de diffusion, elle devrait automatiquement charger l'heure correcte en provenance d'une montre atomique. Cela se produit même si vous n'avez pas activé le service MSN Direct. Du moment que votre montre reçoit un signal, vous n'avez pas besoin de régler l'heure. Cette heure est précise au millième de seconde près et s'ajuste automatiquement lors du changement horaire vers l'heure d'été. Par ailleurs, votre montre change automatiquement de zone horaire lorsque vous voyagez. Remarque Lorsque vous mettez votre montre en marche, cela peut prendre quelques minutes avant qu'elle ne capte l'heure de l'horloge atomique. Si votre montre ne reçoit aucun signal, vous pouvez régler l'heure manuellement. Vous pouvez également changer l'affichage d'un cadran de 12 heures vers un cadran de 24 heures et vous pouvez outrepasser le réglage automatique de zone horaire. Pour obtenir des détails à ce sujet, consultez "Changement des paramètres de la montre" plus loin dans ce guide. Choix de l'Apparence du Cadran Vous pouvez changer l'apparence de votre montre pour refléter votre style personnel, votre environnement ou votre humeur. Pour changer l'apparence de l'affichage de votre montre : 1. Appuyez sur Chaîne et maintenez enfoncé pour passer à la chaîne Heure. 2. Attendez que la face actuelle apparaisse. 3. Appuyez sur Précédent ou Suivant jusqu'à ce que vous trouviez l'affichage de cadran qui vous plait. 50 Remarque Certains affichages vous permettent, en appuyant sur Entrée d'afficher la date et les secondes.