ELECTRONIC OVEN CONTROL Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your oven control may not look exactly like those shown. This doesn't change the way it operates. Up p e r Ov e n Bake Speed bake Speed clean Bake time Clear /Off Controls UPPER OVEN LOWER OVEN UPPER ROAST WARM BAKE CONV BROIL Lower Oven UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN CONV BROIL WARM BAKE DELAY LOWER ROAST LOCKED Bake Speed bake Speed clean Bake time Clear /Off Controls LOCKED DELAY TIMED TIMED Broil Keep warm Clean Start time START Oven light Clock Timer On/Off Oven light Broil Keep warm Clean Start time START Control Pad Functions (Upper oven shown only) Speed Bake Pad- Used to enter the speed bake mode temperature (some models). Speed Clean Pad-Used to select the Speed Clean feature (some models). Bake Time PadUsed to enter the length of the baking time. Clear/Off- Used to cancel any function previously entered except the time of day and minute timer. Push Clear/Off pad to stop cooking. Clear/Off also controls the Oven Lockout feature. Timer ON/OFF Pad- Used to set or cancel the minute Clock Pad -- timer. The minute Used to set timer does not start the time of day. or stop cooking. Bake PadUsed to enter the normal Bake baking mode temperature. Broil PadUsed to select variable Broil feature. Up p e r Ov e n Speed clean Bake time Clear /Off Controls UPPER OVEN LOWER OVEN UPPER ROAST WARM BAKE CONV BROIL Speed bake UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN CONV BROIL WARM BAKE DELAY LOWER ROAST LOCKED LOCKED DELAY TIMED TIMED Broil Keep warm Clean PadUsed to select the self-cleaning mode. Clean Start time START Oven light Clock Upper Oven Light- Used to turn the upper oven light on and off. Timer On/Off Oven light Keep Warm PadUsed to select the Keep Warm feature. Start Time Pad- Used to set the desired start time (Delayed Start) for baking or cleaning. Can be used with any BAKING or CLEANING cycles. Start- Used to start all oven functions. Not used with Oven Light. Up or Down Arrow padsUsed to enter temperature and times. Lower Oven Light- Used to turn the lower oven light on and off. NOTE: All instructions are given for the UPPER oven. If LOWER oven is used the indicator lights will appear in the right portion of the display. Setting Silent Control Operation The START TIME and CLEAN pads control the Silent Control Operation feature. The Silent Control Operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. To change control from normal sound operation to silent control operation 1. Press and hold START TIME pad for 6 seconds. A beep will sound, "--:--" will appear, "UPPER" and "DELAY" will flash in the display. After 6 seconds, a beep will sound and "SP" will appear in the display. 2. Press CLEAN pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode. 3. Press START pad or wait 5 seconds to accept the change. Press CLEAR/OFF pad to reject the change. Temperature Display -- Fahrenheit or Celsius: The BROIL and CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will be changed at the same time. To change display from Fahrenheit to Celsius or Celsius to Fahrenheit 1. Press BROIL pad and hold for 6 seconds. A beep will sound, "---" will appear "UPPER" and "BROIL" will flash in the display. After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius. 2. Press CLEAN pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C". 3. Press START pad or wait 5 seconds to accept the change. Press CLEAR/OFF pad to reject the change. Printed in United States 1 318200137 (0510) Rev. A Setting the Clock The CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the wall oven is first plugged in, or when the power supply to the appliance has been interrupted, the timer in the display will flash along with "PF" (power failure). When PF appears in the display and 12:00 is flashing, press CLEAR OFF pad. A beep will sound and PF will disappear. To set the clock 1. Press CLOCK pad. "CLO" and the current time of day will appear in the display. 2. Press UP or DOWN ARROW pad to set the correct time of day. Press START pad. The new time of day will appear in the display. Changing Between 12 or 24 Hour Time of Day Display 1. Press and hold CLOCK pad for 7 seconds. "CLO" and the current time of day will appear in the display. A beep will sound and "12h" or "24h" will appear in the display. 2. Press CLEAN pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h". 3. Press START pad or wait 5 seconds to accept the change. Press CLEAR/OFF pad to reject the change. 4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. Setting Continuous Bake or 12 Hour Energy Saving The TIMER ON/OFF and CLEAN pads control the Continuous Bake or 12 Hour Energy Saving Features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. To set the control for Continuous Bake or 12 Hour Energy Saving Features 1. Press and hold TIMER ON/OFF pad for 10 seconds. After 10 seconds "12h" or "- -h" will appear in the display and the control will beep once. 2. Press CLEAN pad to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h" indicates the control is set for the Continuous Bake feature. 3. Press START pad or wait 5 seconds to accept the change (display will return to time of day). Press CLEAR/OFF pad to reject the change. Setting Timer The TIMER ON/OFF pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control functions, except during a self clean operation. To set the Timer 1. Press TIMER ON/OFF pad. "--:--" will appear and "TIMER" will flash in the display. 2. Press UP or DOWN ARROW pad to set the desired time in the display. Press START pad or wait 5 seconds. The time will begin to countdown with the set time and "TIMER" will stay in the display. Note: If START pad is not pressed the timer will return to the time of day after 25 seconds. 3. When the set time has run out, "End" and "TIMER" will show in the display. The clock will sound with 3 beeps every 7 seconds until TIMER ON/OFF pad is pressed. To cancel the Kitchen Timer before the set time has run out: Press TIMER ON/OFF pad. The display will return to the time of day. Setting Oven Lockout Feature The CLEAR/OFF pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven doors and prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked individually. To activate the Oven Lockout feature 1. Press and hold CLEAR/OFF pad for 3 seconds. 2. After 3 seconds a beep will sound, "DOOR", "LOCKED" will flash and "Loc", the oven icon, "UPPER" and will appear in the display. Once the oven door is locked the "DOOR" and "LOCKED" indicator will stop flashing and remain in the display. To reactivate normal oven operation: 1. Press and hold CLEAR/OFF pad for 3 seconds. A beep will sound. The oven icon, "UPPER" "LOC" and will disappear from the display. "DOOR" and "LOCKED" will flash in the display until the oven door has completely unlocked. 2. The wall oven is again fully operational. Note: Because you can set the oven lockout individually, the lower oven can be used when the upper oven lockout feature is on. 2 Setting Oven Controls Setting Bake (all models) or Speed Bake (some models) The BAKE pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F to 550° F (77°C to 288°C). To set the Bake or the Speed Bake Temperature 1. Arrange interior oven racks and place food in oven. 2. Press BAKE or SPEED BAKE pad, "- - -" will appear, "UPPER" and "BAKE" will flash in the display. 3. Press UP or DOWN ARROW pad to set the desired temperature. The desired temperature will appear, "UPPER" and "BAKE" continue flashing in the display. 4. Press START pad or wait 5 seconds. "UPPER" and "BAKE" stop flashing and the oven icon will appear in the display. A beep will sound once the oven temperature reaches the desired baking temperature. Pressing CLEAR/OFF pad will cancel the Bake feature at any time. To change the Bake or Speed Bake Temperature 1. After the oven has already been set to bake and the oven temperature needs to be changed, press BAKE or SPEED BAKE pad. "- - - °" will appear, "UPPER" and "BAKE" start flashing in the display. 2. Press UP or DOWN ARROW pad to increase or decrease the set temperature. 3. Press START pad or wait 5 seconds. "UPPER" and "BAKE" will stop flashing and remain in the display. A beep will sound once the oven temperature reaches the desired baking temperature. Note: If the oven was recently heated from prior cooking and has remained heated, the bake element symbol may not show in the display immediately. How the Speed BakeTM Cooking System works (some models) Speed BakeTM Cooking System uses a fan to circulate the oven's heat uniformly and continuously around the oven. This improved heat distribution allows for fast, even cooking and browning results. It also gives better baking results when using two racks at the same time (See Fig. 1). Heated air flows around the food from all sides, sealing in juices and flavors. Meats cooked with Speed BakeTM Cooking System are juicer. Poultry is crisp on the outside while staying tender and moist on the inside. Breads and pastry brown more evenly. Most foods baked in a standard oven can be cooked faster and more evenly with Speed BakeTM Cooking System. Benefits of Speed BakeTM Cooking System: --Foods cook up to 25 to 30% faster, saving time and energy. --Multiple rack baking. --No special pans or bakeware needed. General Cooking Instructions: For Baking: 1. For optimum cooking results it is recommended to preheat the oven when baking foods such as cookies, biscuits and breads. 2. Reduce oven temperature 25° F from recipe's recommended oven temperature. Follow the remainder of the recipe's instructions using the minimum recommended cook time. Note: Layer cakes will have better results using the normal Bake feature. Fig. 1 For Roasting: 1. Preheating is not necessary when roasting foods with Speed BakeTM Cooking System. 2. Since Speed Bake cooks food faster, reduce the cook time by 25% from the recommended cook time of your recipe. Increase the time until the desired doneness is obtained. Note: Cook time reductions will vary depending on the amount and type of food being cooked. To Set Speed BakeTM Cooking System: 1. Program the oven as you normally would to bake. Speed Bake may be used with Bake, Timed Bake and Delayed Time Bake features. 2. The oven icon with a fan will appear in the display when the Speed Bake mode is active. The fan stays on when the oven door is closed and shuts off while the oven door is opened. The fan will continue to operate until cooking is complete. 3. To cancel Speed Bake, press on the oven control as you would to stop any baking function. 3 Setting Oven Controls Setting Timed Bake or Timed Speed Bake Feature The BAKE or SPEED BAKE and BAKE TIME pads control the Timed Bake feature. The automatic timer of the Timed Bake feature will turn the oven OFF after cooking for the desired amount of time you selected. To program the oven to begin baking immediately and to shut off automatically (Timed Bake): 1. Be sure that the clock is set for the correct time of day. 2. Arrange interior oven rack(s) and place the food in the oven. 3. Press BAKE or SPEED BAKE pad, "UPPER", "BAKE" will flas ...