Use & Care Manual Beverage Center II Welcome .....................................2 Safety Instructions .....................3 Installation ..................................4-5 Door Reversal .............................6 Features At A Glance .................7 Temperature Controls.................7 First Steps ..................................8-12 Helpful Hints ...............................13 Beverage Center Extra Features ......................................13 Optional Ice Service ...................14 Energy Saving Tips .....................15 Vacation and Moving Tips ..........15 Normal Operating Sounds ..........16 Care & Cleaning ..........................17-18 Warranty Information ..................19 Troubleshooting .........................20-21 Before You Call ...........................22 READ AND SAVE THESE INSTRUCTIONS P/N 241666500 (0905) WELCOME & CONGRATULATIONS Congratulations on your purchase of a new beverage center! We here at Electrolux Home Products, Inc. are very proud of our product and we are completely committed to providing you with the best service possible. Your satisfaction is our #1 priority. Please read this Use & Care Manual very carefully. It contains valuable information on how to properly maintain your new beverage center. We know you'll enjoy your new beverage center and Thank You for choosing our product. We hope you consider us for future purchases. Questions? 1-800-944-9044 (United States) 1-800-265-8352 (Canada) PLEASE READ AND SAVE THESE INSTRUCTIONS This Use & Care Manual provides specific operating instructions for your model. Use your beverage center only as instructed in this manual. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance. Please record your model and serial numbers below for future reference. This information is found on your serial plate located inside the refrigerator compartment. Extend Your Warranty Protection With An Extended Service Contract CALL 1-800-944-9044 To Enjoy These Benefits: · · · · Total freedom from repair bills so unexpected repairs won't upset your budget. Fast, convenient toll-free service is just a phone call away. Top-quality repairs by factory-trained experts. Quick access to genuine replacement parts so you can rest assured your Beverage Center is repaired with the proper components. NOTE Use only soap and water to clean serial plate. Model Number: Serial Number: Purchase Date: Please attach sales receipt here for future reference. Serial Plate PLEASE COMPLETE AND MAIL IN THE PRODUCT REGISTRATION CARD INCLUDED WITH YOUR BEVERAGE CENTER. 2 IMPORTANT SAFETY INSTRUCTIONS WARNING Please Read All Instructions Before Using This beverage center. PROPER DISPOSAL OF YOUR BEVERAGE CENTER Risk of child entrapment Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous ­ even if they will sit for "just a few days." If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents. Before you throw away your old refrigerator/ freezer: · · · Remove doors. Leave shelves in place so children may not easily climb inside. Have refrigerant removed by a qualified service technician. FOR YOUR SAFETY · Do not store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards. Do not operate the beverage center in the presense of explosive fumes. Avoid contact with any moving parts of the automatic ice maker. (some models) · · CHILD SAFETY Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after this beverage center is unpacked. Children should NEVER use these items to play with. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation. IMPORT IMPOR TANT Turning the Air Flow and Temperature Controls to "0" turns off the compressor and prevents your Beverage Center from cooling, but does not disconnect the power to the light bulb and other electrical components. To turn off power to your Beverage Center you must unplug the power cord from the wall outlet. WARNING These guidelines must be followed to ensure that safety mechanisms in this beverage center will operate properly. ELECTRICAL INFORMATION · The beverage center must be plugged into its own dedicated 115 Volt, 60 Hz., AC only electric outlet. The power cord of the appliance is equipped with a threeprong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Do not use an extension cord or adapter plug. If the power cord is damaged, it should be replaced by the manufacturer, service technician or a qualified person to prevent any risk. Never unplug this beverage center by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord. Unplug this beverage center before cleaning and before replacing a light bulb to avoid electrical shock. Performance may be affected if the voltage varies by 10% or more. Operating this beverage center with insufficient power can damage the compressor. Such damage is not covered under your warranty. Do not plug the unit into an outlet controlled by a wall switch or pull cord to prevent this beverage center from being turned off accidentally. Avoid connecting this beverage center to a Ground Fault Interruptor (GFI) circuit. WARNING CO2 CANISTER SAFE HANDLING · CO2 canisters must be handled with extreme care. They contain potentially hazardous high pressure compressed gas. ALWAYS connect CO2 gas canisters to a pressure regulator. NEVER drop or throw the CO2 canister. NEVER connect gas canister directly to keg. ALWAYS keep CO2 canisters in a cool place (70º or less) and away from heat. In case of CO2 leakage, ventilate and evacuate the area immediately. ALWAYS keep canister secured in an upright position. Check the Department of Transportation (D.O.T.) test date on the canister neck and do not use if older than 5 years. Return outdated canister to your gas supplier for one that is within the time limit. · · · · · · · · · · · · · · 3 INSTALLATION This Use & Care Manual provides specific operating instructions for your model. Use this beverage center only as instructed in this Use & Care Manual. Before starting this beverage center, follow these important first steps. LEVELING All four corners of your beverage center must rest firmly on a solid floor. Your beverage center is equipped with adjustable leveling screws to help level your unit. LOCATION · · Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug. If possible, place this beverage center out of direct sunlight and away from the range, dishwasher or other heat sources. This beverage center must be installed on a floor that is level and strong enough to support a fully loaded beverage center. Consider water supply availability for models equipped with an automatic ice maker. To Level Your Beverage Center: 1. 2. Remove toe grille. Use adjustable wrench to adjust leveling screws. · · CAUTION · Do Not install the beverage center where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the beverage center. DO NOT block the toe grille on the lower front of your beverage center. Sufficient air circulation is essential for the proper operation of your beverage center. THIS BEVERAGE CENTER IS NOT INTENDED FOR OUTDOOR USE. NOTE Raise the front of the beverage center enough so the doors close freely when opened halfway. The beverage center should slope ¼" to ½" from front to back. Then level the beverage center from side to side. · · INSTALLATION Installation Clearances · Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: Sides & Top 3/8" Back 1" Raise Stationary Front Roller with Leveling Screw DOOR OPENING NOTE If your beverage center is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider. Your beverage center should be positioned to allow easy access to a counter when removing food. To make this possible, the direction in which the doors open can be reversed. See Door Removal & Reversal Instructions. CAUTION CAUTION DO NOT ATTEMPT TO MOVE OR RELOCATE THE BEVERAGE CENTER WITH A KEG INSIDE. 4 INSTALLATION - CONNECTING ICE MAKER TO WATER SUPPLY WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the beverage center from electrical power before connecting a water supply line to the beverage center. To Connect Water Supply Line To Ice Maker Inlet Valve Disconnect beverage center from electric power source. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve. 3. Unscrew plastic cap from water valve inlet and discard cap. 4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown. 5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. 6. With steel clamp and screw, secure water supply line to rear panel of beverage center as shown. 7. Coil excess water supply line (about 2½ turns) behind beverage center as shown and arrange coils so they do not vibrate or wear against any other surface. 8. Turn ON water supply at shutoff valve and tighten any connections that leak. 9. Reconnect beverage center to electrical power source. 10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/OFF position of arm). 1. 2. CAUTION To Avoid Property Damage: · Copper tubing is recommended for the water supply line. Water supply tubing made of ¼" plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line. · DO NOT install water supply tubing in areas where temperatures fall below freezing. · Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly. IMPOR TANT Ensure that your water supply line connections comply with all local plumbing codes. Before Installing The Water Supply Line, You Will Need · · · Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver Access to a household cold water line with water pressure between 30 and 100 psi. A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the beverage center to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the beverage center can be moved out for cleaning (as shown). A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve. A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve. · · NOTE Water line kit number 5303917950, available from your appliance dealer at additional cost, contains 25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression nuts, (2) ferrules/sleeves, and instructions for installing a water supply line. IMPOR TANT It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours. 5 DOOR REMOVAL / REVERSAL INSTRUCTIONS Door Stop Screw Top Hinge Screw Bottom Hinge Screw Center Hinge Screw DOOR REMOVAL AND REVERSAL INSTRUCTIONS: NOTE Screws Top Hinge Cabinet Hole Plugs Hinge Hole Plug The direction in which your beverage center doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person. IMPORT IMPOR T ANT Before you begin, turn the beverage center ...