F810 Camera Controls Mode dial Auto WIDE/STD switch Programmed Auto Shutter-priority Auto Aperture-priority Auto Manual Movie AF-Assist Illuminator Shutter button Flash control sensor Self-timer lamp Viewfinder window Flash Microphone Speaker DC IN 5V (power input) socket C-AF button (USB) socket A/V OUT (Audio / Visual output) socket Cradle connection socket xD-Picture Card slot Battery compartment Battery release catch Tripod mount Battery cover 4-direction (abdc) button a/ d/ c/ (Photometry) button (Macro) button (Flash) button Continuous shooting button Exposure compensation button DISP (Display) button BACK button Strap mount MENU/OK button LCD monitor Viewfinder lamp (W wide-angle) button Viewfinder Flash pop-up button (T telephoto) button Photo mode( ) button Command dial Power switch Photography mode Playback mode Power-OFF Portrait Landscape Sports Night scene Lens Lens cover BL00412-200(1) E Picture Taking Refer to Owner's Manual for more detailed instructions A. Charging the battery Indicator 3 Indicator Battery release catch 3. You can select your preferred date format. Press "d" or "c" to select the date order, Year, Month, Day, Hour or Minute. Press "a" or "b" to correct the setting. Press the "MENU/OK" button after you complete the setting. *Refer to owner's manual for date/time setup. B. Setting up the camera 1 Gold marking NP-4 0 DC IN 5V socket C. Taking pictures 1 Charge the battery in the camera for 2 hours or until the viewfinder lamp turns off. 1. Set the Power switch to "q". 2. Press the shutter button down halfway to adjust the focus. 3. Press the shutter button down fully to take a picture. The camera makes a "Click" sound and takes the picture. 2 Bebeep 3 Click 1 0 2 0 1. Align the gold marking on the xD-Picture Card slot with the gold contact area on the xD-Picture CardTM and push the card firmly all the way into the slot. Close the battery cover. D. Viewing pictures 1 2 1. Set the Power switch to "w". 2. Press the "d " or "c " to move through your images. 2 2. Slide the Power switch to turn the camera on. Still images that can be viewed on the FinePix F810 You can use this camera to view still images recorded on the FinePix F810 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Card. FGS-406105-FG Viewing images on your PC A.Install Software B.Connect a Camera to PC C.Save Images A. Install Software Do not connect the camera to your PC until the software installation is completed. 1. Turn on your PC and start up Windows. by using a system administrator account (e.g. "Administrator"). Windows XP q The "Found New Hardware" help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. w Specify the settings in the "AutoPlay" dialog box. e Select "Viewing images using FinePixViewer" and then select the "Always do the selected action" checkbox. ! Users of Windows 2000 Professional or Windows XP should log in 2. Quit all other active applications until no applications are shown in the taskbar. 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 4. The Setup screen appears. Click the [Installing FinePixViewer] button. r Click the [OK] button to launch FinePixViewer. 5. After installation completed, press [Restart] button. B. Connect the Camera to your PC 1. Load an xD-Picture Card containing photographed images into your camera. 2. Set the "USB MODE" setting in the "SET-UP" menu to digital camera "¶". (Refer to "USING THE SET-UP SCREEN" in the owner's manual.) C. Save Images 1. The Save image Wizard starts up. Click the [NEXT] button. 2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created. Ex. \My Documents \ My Pictures \ 2004_0312 Image 3. Turn your camera off. 4. If you have one, plug the AC power adapter connector into the "DC IN 5V" socket on the camera and then plug the adapter itself into the main power outlet, otherwise be sure your battery is fresh and charged. 5. Use the USB cable (included) to connect the camera to your PC. Camera D. View Images 1. Click the [Show List of Images] button. 2. Select "Preview" in the View menu to display an enlarged image. DC IN 5V socket socket USB socket PC 6. Turn the camera on. 7. Windows 98/98 SE/Me/2000 Professional FinePixViewer starts up automatically. For more information Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5 and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the following website. ( http://home.fujifilm.com/products/digital/ ) For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual.