2 Additional Technical Manual Mainboard D1381 / D1382 English Are there ... ... any technical problems or other questions you need clarified? Please contact: · your sales partner · your sales outlet You will find further information in the manuals "Safety" and "Ergonomics". The latest information and updates (e. g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1382-Z180-1-7619 Printed in the Federal Republic of Germany AG 0203 02/03 A26361-D1382-Z180-1-7619 Mainboard D1381 / D1382 Additional Technical Manual February 2003 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2003 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................2 Mechanics .........................................................................................................................................4 Connectors ........................................................................................................................................6 Power supply ATX connector.............................................................................................6 Power supply control..........................................................................................................6 Front panel connector ........................................................................................................7 LED connector II ................................................................................................................8 Fan 1 connector.................................................................................................................8 Fan 2 connector.................................................................................................................8 LCD status indicator connector ..........................................................................................9 UBS port C/D and E/F - dual channel ................................................................................9 Intrusion connector for case open detect for optional push-button (opener) .....................10 Audio S/PDIF (2-pin)........................................................................................................10 Audio S/PDIF (3-pin)........................................................................................................10 Audio front panel connector .............................................................................................10 CD-ROM audio connector................................................................................................11 Additional power supply ...................................................................................................11 Configuration ...........................................................................................................................12 Functions controlled by the configuration switch ..............................................................12 Power ......................................................................................................................................12 Power requirement for onboard components (worst case) ...............................................12 Power loadability..............................................................................................................12 Documentation ................................................................................................................................13 Installing drivers...............................................................................................................................13 Upgrading main memory..................................................................................................................13 Troubleshooting...............................................................................................................................14 Message BIOS update.............................................................................................................14 The screen stays blank............................................................................................................14 A26361-D1382-Z180-4-7619 Introduction i Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard. You will find further information e. g. in the complete mainboard Technical Manual and in the "BIOS Setup" description. Further information regarding drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please read the "Installing drivers" chapter. The latest BIOS version and drivers can be found on the internet under http://www.fujitsu-siemens.com/en/service. ! Computer mainboards and components contain very delicate IC chips. To protect them against damage caused by static electricity, you must follow these precautions: · · · Use a grounded wrist strap. Unplug your computer before you remove any part of the casing. Place the mainboard and the components on a grounded antistatic pad whenever you remove them from the computer. Hold components by the edge, do not touch any pins or connectors on them. Once you have installed the mainboard, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1382-Z180-4-7619 English - 1 Features Features The table shows assembly versions of this mainboard as an example. D1382-A Onboard Features Chipset Board Size VGA Audio Buzzer / int. Speaker Support LAN / with Alert-on-LAN HI-SPEED USB SmartCard Support (USB / serial) Thermal Management System Monitoring Fujitsu Siemens Keyboard Power Button Support Internal Connectors DIMM Sockets (DDR, PC2100) AGP Slot (4x, 32Bit, 66 MHz, 1.5 V) PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) CNR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) S/PDIF* (digital Audio) CD / AUX Audio Input Frontpanel Audio (headphone, microphone) Wake-on-LAN USB ports* (2.0, ~480Mb/s) Serial Ports* (FIFO, 16550 compatible) FAN Connectors PSU / FAN1 / FAN2 / FAN3 SMBus Connector* (Case Temperature) Intrusion Connector* (Case Open) Power Connectors ATX / ATX12V / AGP PRO 2 1 3 2 1 1 1/1 4 1 1/1/1/1 1 1/1/2 1 3 2 1 1 1/1 4 1 -/1/1/1 1/1/µ-ATX ü ü -/ü ü/ü ü ü/ü ü ü µ-ATX ü ü ü/ü/ü ü/ü D1381-A 2 - English A26361-D1382-Z180-4-7619 Features External Connectors VGA Audio Mic. in / Line in / Line out (2 x 0.5 W / 8 ) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard USB Ports (2.0, ~480Mb/s) Serial Ports (FIFO, 16550 compatible) Parallel Port (EPP/ECP) * for use with internal devices or optional Front- or Rearpanel ** not supported by standard Power Supplies 1 1/1/1 1 1/1 2 1 1 1 1/1/1 1 1/1 2 1 1 A26361-D1382-Z180-4-7619 English - 3 Mechanics Mechanics Layout Mainboard D1381 / D1382 µATX 9.6'' x 9.6'' ( 243.84 mm x 243.84 mm) 13 4 5 6 8a 8b 8c 2 7 1= 2= 3= 4= 5= PS/2 mouse port PS/2 keyboard port Serial port Parallel port VGA 6 = LAN connector 7 = USB port 8a = Audio Line-In 8b = Audio Head-Out 8c = Audio Micro-In The components and connectors marked are not necessarily present on the mainboard. 4 - English A26361-D1382-Z180-4-7619 Mechanics 1 234 5 67 8 9 DIMM 2 DIMM 1 10 11 12 13 14 15 AGP 20 PCI 1 19 1 = Power supply ATX 2 = Floppy Disk Drive 3 = IDE drives 3 and 4 (secondary) 4 = Power supply monitoring 5 = Connector for front panel 6 = Switch 7 = Jumpers 8 = IDE drives 1 and 2 (primary) 9 = Fan 2 10 = Power On LED II 11 = Cover monitoring 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 18 17 16 LCD display USB ports C / D USB ports E / F COM2 SP/DIF (digital Audio) Audio front panel CD audio input Power supply Fan 1 (e.g. for the processor) The components and connectors marked are not necessarily present on the mainboard. PCI 2 PCI 3 A26361-D1382-Z180-4-7619 English - 5 Connectors Connectors ! Some of the following connectors are optional! Power supply ATX connector 1 11 Pin 1 2 3 4 5 6 7 8 9 10 Signal +3.3V(P2V2P) +3.3V(P2V2P) GND +5V (VCC) GND +5V (VCC) GND Powergood (high asserted) +5V Auxiliary (VCC Aux) +12V (P12VP) Pin 11 12 13 14 15 16 17 18 19 20 Signal +3.3V(P2V2P) -12V (P12VN) GND PS on (low asserted) GND GND GND -5V (5PVN) +5V (VCC) +5V (VCC) 1 Power supply control Pin 1 2 3 4 5 6 7 8 Signal AC Outlet (high asserted) PS FAN Control (PS FAN C max 3mA) Reserved PS FAN Sense SMB CLK SMB DATA VCC EEPROM (+3,3V) GND 6 - English A26361-D1382-Z180-4-7619 Connectors Front panel connector Power On/Off Reset 1) Sleep LED Message LED Power On 1) HD-LED LED I 1) 3) 1 2 1) 1) 2) Sleep SCSI LED Input Speaker 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible 1) The sleep button (optional) functions only for operating systems with APM (not with ACPI). Pin 1 Signal Sleep LED (Cathode) Pin 2 Signal In case of 'Sound via internal system speaker' support: Speaker negative Otherwise: not connected Key GND In case of 'Sound via internal system speaker' support: Speaker positive Otherwise: not connected Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 3 5 7 Sleep LED (Anode) Key PowerON_LED (Anode) 4 6 8 9 11 13 15 17 19 21 23 25 271) 29 PowerON_LED (Anode) Sleep LED and PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) 10 12 14 16 18 20 22 24 26 28 30 A26361-D1382-Z180-4-7619 English - 7 Connectors LED connector II 3 1 Pin 1 2 3 Signal Power On LED II (Anode) Power On LED II (Anode) Power On LED II (Cathode) Fan 1 connector (system fan - supervised) Pin 1 2 3 Signal 1 GND Controlled Fan voltage (0V, +6V ... +12 V, max. 1 A) or fix Fan voltage (+12 V, max. 1 A) Fan sense Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND Fix Fan voltage (+12 V, max. 1 A) Fan sense 1 8 - English A26361-D1382-Z180-4-7619 Connectors LCD status indicator connector 2 1 Pin 1 3 5 7 9 11 13 Signal SMB CLK SMB DATA Key LAN Activeb Icon Harddisk Action Icon Message Icon Power Icon Pin 2 4 6 8 10 12 14 Signal GND GND RFU Reseved for Future Use LAN Link Icon BMC Alert Icon Sleep Icon P3V3P DUAL UBS port C/D and E/F - dual channel (internal or external via special wire) 1 11 2 12 Pin 1 3 5 7 9 11 Signal Key VCC C Data negative C Data positive C GND Key Pin 2 4 6 8 10 12 Signal Chiprcardreader on VCC D Data negative D Data positive D GND not connected A26361-D1382-Z180-4-7619 English - 9 Connectors Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) Audio S/PDIF (2-pin) 1 Pin 1 2 Signal GND SPDIF out Audio S/PDIF (3-pin) 1 Pin 1 2 3 Signal GND SPDIF out GND Audio front panel connector 1 2 Pin 1 3 5 7 9 Signal Micro input Micro bias Right line output NC Left line output Pin 2 4 6 8 10 Signal Analog GND Analog VCC Right line return Key Left line return 10 - English A26361-D1382-Z180-4-7619 Connectors CD-ROM audio connector 1 Pin 1 2 3 4 ...