User manual FUJITSU SIEMENS SCENIC 300 / 500

Systembaugruppe D1115 / System board D1115 1 Reserviert für Hersteller / Reserved for manufacturer ON 1 2 3 4 5 6 7 8 OFF/OPEN Standard Optional A26361-D1115-Z140 Ausgabe/Edition 08/01 Standardeinstellung (OFF) darf nicht verändert werden. Don't change the default setting (OFF). COM 1 Fan Fan RAM Power supply 2 System-BIOS wiederherstellen / BIOS recovery ON 1 2 3 4 5 6 7 8 OFF/OPEN Mouse KBD ON Das System startet von Diskette und ermöglicht die Wiederholung eines fehlgeschlagenen BIOS-Update. The system starts from floppy and allows a BIOS recovery. Das System startet von der Festplatte. The system starts from the hard disk. LPT 1 2 COM 2 / Chipcard reader OFF Floppy disk IDE (secondary) Slot 1 for Pentium II or Celeron Battery 3 Schreibschutz für Disketten / Write protection for floppy disks ON 1 2 3 4 5 6 7 8 OFF/OPEN ON OFF Disketten können nur gelesen werden. Read only floppy disks. Disketten können gelesen, beschrieben und gelöscht werden. Read, write and delete floppy disks. USB On/Off switch Wake on LAN 4 Reserviert für Hersteller / Reserved for manufacturer ON 1 2 3 4 5 6 7 8 OFF/OPEN Standardeinstellung (OFF) darf nicht verändert werden. Don't change the default setting (OFF). PCI slot 3 AGP slot IDE (primary) Front panel Reset Power on/off PCI slot 2 SCSI 1 LED input 2 Shared Shared Speaker HD LED Message LED Power on LED ISA slot 5, 6, 7, 8 Taktfrequenz / Clock speed ON 1 2 3 4 5 6 7 8 OFF/OPEN Externe Taktfrequenz 66 MHz / External clock frequency 66 MHz Internal clock Switch 5 233 MHz off 266 MHz on 300 MHz off 333 MHz on 366 MHz off 400 MHz on 433 MHz off Switch 6 off on on off off on on Switch 7 Switch 8 on on off on off on off on off on on off on off PCI slot 1 Externe Taktfrequenz 100 MHz / External clock frequency 100 MHz Internal clock Switch 5 350 MHz off 400 MHz on 450 MHz off 500 MHz on Switch 6 off on on off Switch 7 Switch 8 on on off on off on off on IRQ0 = Timer 0 IRQ1 = Keyboard IRQ2 = Interrupt cascading IRQ3 = SER2 (COM 2 / COM 4) ! IRQ4 = SER1 (COM1 / COM3) IRQ5 = ................................... IRQ6 = Floppy disk controller IRQ7 = LPT1 / LPT3 Do not connect an internal speaker if a buzzer is onboard. IRQ8 = Real-time clock IRQ9 = ........................ IRQ10 = ...................... IRQ11 = ...................... IRQ12 = Mouse IRQ13 = Numeric proc. IRQ14 = Primary IDE IRQ15 = Secondary IDE Polyscript Carbo weiß (Nr.13-54)