SYSTEM BOARD D1325/D1326/D1327 ADDITIONAL TECHNICAL MANUAL Are there ... ... any technical problems or other questions you need clarified? Please contact: · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 · your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1327-Z180-1-7619 Printed in the Federal Republic of Germany AG 0801 08/01 A26361-D1327-Z180-1-7619 System Board D1325/D1326/D1327 Additional Technical Manual August 2001 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2001 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................1 Mechanics .........................................................................................................................................3 Connectors ........................................................................................................................................5 Power supply monitoring....................................................................................................5 Front panel connector........................................................................................................6 Fan 2 connector.................................................................................................................7 Fan 3 connector.................................................................................................................7 Intrusion connector for case open detect for optional push-button (opener) .......................7 USB port C / D 1 - Dual channel ........................................................................................8 USB port C / D 2 - Dual channel ........................................................................................8 Wake On LAN (WOL) connector........................................................................................9 CD-ROM audio connector (internal)...................................................................................9 Audio front panel (internal).................................................................................................9 Auxiliary (MPEG, TV) audio connector (internal).............................................................. 10 Fan 1 connector............................................................................................................... 10 USB power ...................................................................................................................... 11 Configuration ........................................................................................................................... 11 Functions controlled by the configuration switch .............................................................. 11 Power ...................................................................................................................................... 12 Power requirement for onboard components (worst case) ............................................... 12 Power loadability.............................................................................................................. 12 Documentation ................................................................................................................................ 12 Installing drivers .............................................................................................................................. 13 Upgrading main memory ................................................................................................................. 13 Troubleshooting............................................................................................................................... 13 Message BIOS update............................................................................................................. 13 The screen stays blank............................................................................................................ 13 A26361-D1327-Z180-1-7619 Introduction i Depending on the configuration chosen, some of the hardware components described may not be available on your system board. You will find further information e. g. in the complete system board Technical Manual and in the "BIOS Setup" description. Further information regarding drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please read the "Installing drivers" chapter. The latest BIOS version and drivers can be found on the internet under http://www.fujitsusiemens.com/en/service. ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused by static electricity, you must follow these precautions: · · · Use a grounded wrist strap. Unplug your computer before you remove any part of the casing. Place the system board and the components on a grounded antistatic pad whenever you remove them from the computer. Hold components by the edge, do not touch any pins or connectors on them. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). Features The table shows assembly versions of this system board as an example. Features Chipset Board Size VGA onboard Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Fujitsu Siemens Keyboard Power Button Support Buzzer onboard / int. Speaker Support ATX ü -/ü/D1325-B D1326-A D1327-A Intel 845 ATX ü ü/ü/ATX ü ü/ü ü ü ü -/ü A26361-D1327-Z180-1-7619 English - 1 Features Internal Connectors DIMM Sockets (SDRAM) AGP Slot (1/2/4x, 32Bit, 66 MHz, 1.5 V) PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) ISA Slot ACR Slot CNR Slot AMR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) CD / AUX Audio Input Front Panel Audio Output Wake-on-LAN Int. Serial Port / with SmartCard Support Int. USB Connectors with SmartCard Support Int. USB Connectors* / shared with CNR External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 ) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external * useable with optional Front or Rear Panel 1/1/1 1 1/1 2 1 2 1/1/1 1 1 1/1 2 1 2 1/1/1 1 1 1/1 2 1 2 3 1 6 1 2 1 1/1 1 1 -/2/1 3 1 6 2 1 1/1 1 -/1 2/3 1 6 2 1 1/1 1 -/1 2/- 2 - English A26361-D1327-Z180-1-7619 Mechanics Mechanics Layout System board D1325 / D1326 / D1326 ATX 12" x 9.6'' (304.8 mm x 243.84 mm) Some of the following connectors are optional and may therefore not be included on your system board. 13 4 56 8 2 7 9a 9b9c 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port Serial port 1 Parallel port Serial port 2 LAN port 7 = USB ports 1 and 2 8 = Game/Midi port 9a = Audio Line-Out Headphones 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked are not necessarily present on the system board. A26361-D1327-Z180-1-7619 English - 3 Mechanics 1 234 5 678 9 10 11 DIMM 3 DIMM 2 DIMM 1 12 13 14 15 AGP PCI 1 20 PCI 3 PCI 4 PCI 2 PCI 5 PCI 6 19 Power supply ATX Floppy disk drive IDE drives 3 and 4 (secondary) Power supply monitoring Connector for control panel and loudspeaker 6 = Configuration switch 7 = IDE drives 1 and 2 (primary) 8 = Voltage indicator LED 9 = Jumper USB 10 = Fan 2 1= 2= 3= 4= 5= 18 17 16 11 = Fan 3 12 = Cover monitoring 13 = USB port C / D 1(non Intel standard)* 14 = USB port C / D 2 (Intel standard)* 15 = Wake On LAN 16 = CD audio input 17 = Audio front panel 18 = AUX audio input 19 = Power supply +12 V 20 = Fan 1 (e. g. for the processor) The components and connectors marked are not necessarily present on the system board. * If both connectors are present, only connector 12 or connector 13 can be used. 4 - English A26361-D1327-Z180-1-7619 CNR Connectors Connectors ! Some of the following connectors are optional! Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal Monitor on PS FAN off request (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND A26361-D1327-Z180-1-7619 English - 5 Connectors Front panel connector Power On/Off 1) Reset 1) Message LED Sleep LED Power On 1) LED 1) 3) HD-LED 1 2 1) Sleep SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) reserved Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). 6 - English A26361-D1327-Z180-1-7619 Connectors Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense Fan 3 connector 1 Pin 1 2 3 Signal GND +12 V NC Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) A26361-D1327-Z180-1-7619 English - 7 Connectors USB port C / D 1 - Dual channel non Intel standard (internal or external via special wire) 1 2 Pin 1 Signal VCC Dual (fused max. 500mA and power supervision with over current detection) Data negative Data positive GND Shield GND Pin 2 Signal Shield GND 3 5 7 9 4 6 8 10 GND Data positive Data negative VCC Dual (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 11 Key 12 USB port C / D 2 - Dual channel Intel standard (internal or external via special wire) 1 2 Pin 1 Signal VCC Dual or VCC for OEM (fused max. 500mA and power supervision with over current detection) Data negative Data positive GND Key Pin 2 Signal VCC Dual or VCC for OEM (fused max. 500mA and power supervision with over current detection) Data negative Data positive GND NC 3 5 7 9 4 6 8 10 8 - English A26361-D1327-Z180-1-7619 Connectors Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Audio front panel (internal) 1 2 Pin 1 3 5 7 9 Signal Micro input Micro bias Right line output NC Left line output Pin 2 4 6 8 10 Signal Analog GND Analog VCC Right line return Key Left line return A26361-D1327-Z180-1-7619 English - 9 Connectors Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector (processor fan - controlled and supervised, only for 3 pin fans) Pin 1 2 3 Signal 1 GND Controlled fan voltage (0 V / 6...12 V) Fan sense 10 - English A26361- ...