User manual FUJITSU SIEMENS SCENIC S2 (I845D)

Systembaugruppe D1330 / 31 / 32 / System board D1330 / 31 / 32 Floppy disk drive Control panel Configuration Primary IDE drive 1 and 2 switch A26361-D1332-Z140-1-7419 Ausgabe/Edition 01/02 Schalter / DIP switches Power supply Power supply monitoring Secondary IDE drives 3 and 4 1 2 ON Schalter muss auf OFF stehen / Switch must be set to OFF System-BIOS wiederherstellen / BIOS recovery ON 1234 Das System startet von Diskette und ermöglicht die Wiederholung eines fehlgeschlagenen BIOS-Update. The system starts from floppy and allows a BIOS recovery. Das System startet mit dem BIOS von der Systembaugruppe (Standard). The system starts with the BIOS from the system board (default settings). DIMM 2 DIMM 1 Fan 1 Fan 2 Cover monitoring C/D USB port WOL ON 1234 OFF 3 4 ON Wird nicht benutzt / Not used Hilfsspannung festlegen / Defining auxiliary voltage ON 1234 PCI 1 PCI 2 PCI 3 ON 1234 OFF Normaler Betrieb (Standard). Alle Funktionen werden mit Hilfsspannung versorgt. Normal operation (default settings). All functions are supplied with auxiliary voltage. Power supply +12 V CNR CD audio input Audio front panel Wake-up on USB wird abgeschaltet. Wake-up on UBS is switched on. AGP AUX audio input Bedienfeldstecker / Front panel connector Power On/Off 1) Reset 1) Message LED Sleep LED Power On 1) LED1) 2) HD-LED 1 2 1) Sleep 1) ) SCSI LED Input externe Anschlüsse / external ports LPT LAN Game/Midi USB port C / D1 / USB port C / D1 Connecting internal 12-pin cables for USB SmartCard Reader 12 CCR ON Connecting internal 10-pin cables for USB Devices non-Intel Standard 12 CCR ON Connecting internal 10-pin cables for USB Devices Intel Standard 12 CCR ON 1) Cable is not included in the delivery scope. 2) 2pin or 3pin AUDIO COM1 COM2 USB Line-Out Micro-In Line-In 1 1 1 Polyscript Carbo weiß (Nr.13-54)