.com COMPONENT Additional Technical Manual System board D1219 / D1218 / D1217 Are there ... ... any technical problems or other questions you need clarified? Please contact: · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 · your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1219-Z180-1-7619 Printed in the Federal Republic of Germany AG 0102 01/02 A26361-D1219-Z180-1-7619 System Board D1219 / D1218 / D1217 Additional Technical Manual January 2002 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................2 Mechanics .........................................................................................................................................5 Connectors ................................................................................................................................7 Serial chipcard reader or internal serial port 2 (COM 2) .....................................................7 Front panel connector ........................................................................................................8 Fan 2 connector.................................................................................................................9 Wake On LAN (WOL) connector ........................................................................................9 USB port C / D 1 - Dual channel ........................................................................................9 CD-ROM audio connector (internal) .................................................................................10 Auxiliary (MPEG, TV) audio connector (internal)..............................................................10 Fan 1 connector...............................................................................................................10 Power supply monitoring..................................................................................................11 Intrusion connector for case open detect for optional push-button (opener) .....................11 Configuration ...........................................................................................................................12 Functions controlled by the configuration switch ..............................................................12 Power ......................................................................................................................................12 Power requirement...........................................................................................................12 Power loadability..............................................................................................................12 Documentation ................................................................................................................................13 Installing drivers...............................................................................................................................13 Upgrading main memory..................................................................................................................13 Troubleshooting...............................................................................................................................14 Message BIOS update.............................................................................................................14 The screen stays blank............................................................................................................14 A26361-D1219-Z180-3-7619 Introduction i Depending on the configuration of your system board, some of the hardware components described may not be available. You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The latest BIOS version or drivers can be found on the internet under http://www.fujitsu-siemens.com/en/service. ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused by static electricity, you must follow these precautions: · · · Use a grounded wrist strap. Unplug your computer before you remove any part of the casing. Place the system board and the components on a grounded antistatic pad whenever you remove them from the computer. Hold components by the edge, do not touch any pins or connectors on them. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1219-Z180-3-7619 1 Features Features The table shows one assembly version of this system board as an example. Features Chipset Board Size VGA onboard (Intel 815E) Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Internal Connectors DIMM Sockets (SDRAM) AGP Slot PCI Slots ISA Slot CNR Slot Type A AMR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) CD / AUX Audio Input Wake-on-LAN Int. Serial Port / with SmartCard Support USB Connectors internal External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 W) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external 1 1 1 1 1 2 2 1 5 1 2 1 1/1 1 1/ü D1217-B1X Intel 815 EP ATX ü ü -/- 2 A26361-D1219-Z180-3-7619 Features The table shows three assembly versions of this system board as an example. Features Chipset Board Size VGA onboard (Intel 815E) Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Internal Connectors DIMM Sockets (SDRAM) AGP Slot PCI Slots ISA Slot CNR Slot Type A AMR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) CD / AUX Audio Input Wake-on-LAN Int. Serial Port / with SmartCard Support USB Connectors internal External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 W) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external 1 1 1 1 1 2 1 1 1 1 1 2 3 1 5 2 1 1/1 1 1/ü 2 3 1 5 1 2 1 1/1 1 1/ü 1 - internal connector 1 - via CNR connector D1218-A1X Intel 815 EP ATX ü ü ü·/ D1218-B1X Intel 815 EP ATX ü ü -/- A26361-D1219-Z180-3-7619 3 Features The table shows three assembly versions of this system board as an example. Features Chipset Board Size VGA onboard (Intel 815E) Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Internal Connectors DIMM Sockets (SDRAM) AGP Slot PCI Slots ISA Slot CNR Slot Type A AMR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) CD / AUX Audio Input Wake-on-LAN Int. Serial Port / with SmartCard Support USB Connectors internal External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 W) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external 1 1 1 1 1 2 1 1 1 1 1 2 3 1 5 2 1 1/1 1 1/ü 2 3 1 5 1 1 2 1 1/1 1 1/ü 2 D1219-A1X Intel 815 EP ATX ü ü ü/ü ü ü D1219-C1X Intel 815 EP ATX ü ü ü/ü ü ü 4 A26361-D1219-Z180-3-7619 Mechanics Mechanics Layout System board D1219 / D1218 / D1217 ATX 12" x 8'' (304,8 mm x 203.2 mm) Some of the following connectors are optional and may therefore not be included on your system board. 1 3 5 6 7 8 2 4 9a 9b9c 1= 2= 3= 4= 5= 6= PS/2 Mouse Controller PS/2 keyboard port LAN port USB ports 1 and 2 Serial Port 1 Parallel Port 7 = VGA port 8 = Game/Midi 9a = Audio Line-Out 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked are not necessarily present on the system board. A26361-D1219-Z180-3-7619 5 Mechanics 1 2 3 4 5 6 7 8 14 13 DIMM 3 DIMM 2 DIMM 1 AGP / GPA 12 9 PCI 4 PCI 1 PCI 2 PCI 3 PCI 5 11 10 1 = Power Supply 2 = Serial chipcard reader interface (optional) or serial port 2 3 = Floppy Disk Drive 4 = IDE drives 3 and 4 (secondary) 5 = IDE drives 1 and 2 (primary) 6 = Connector for control panel and loudspeaker 7 = Wake On LAN 8 = Fan 2 (e. g. for the processor) 9 = USB port C / D 1 10 = CD audio input 11 = AUX audio input 12 = Fan 1 (e. g. for the processor) *) 13 = Power supply monitoring 14 = Cover monitoring The components and connectors marked are not necessarily present on the system board. *) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector only. 6 A26361-D1219-Z180-3-7619 CNR IS A Mechanics Connectors ! Some of the following connectors are optional! Serial chipcard reader or internal serial port 2 (COM 2) external via optional cable 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 SIN 2 SOUT 2 DTR 2 GND EXT SMI (low asserted) RESET (TTL - Signal, low asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 RTS 2 CTS 2 PC_On_Strobe (TTL - Signal, low asserted) VCC Auxiliary VCC GND Key A26361-D1219-Z180-3-7619 7 Mechanics Front panel connector Power On/Off 1) Reset 1) Message LED Sleep LED Power On 1) LED 1) 3) HD-LED 1 2 1) Sleep SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if a buzzer is onboard. Pin 8 is connected to GND if a buzzer is not onboard. ! Do not connect an internal speaker if a buzzer is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). 8 A26361-D1219-Z180-3-7619 Mechanics Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND +12 V Fan sense 1 Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) 12 17 14 USB port C / D 1 - Dual channel (internal or external via special wire) 1 7 Pin 1 Signal VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Data negative (port C) Data positive (port C) GND Shield GND Pin 7 Signal Shield GND Pin 13 Signal Key 2 3 4 5 8 9 10 11 GND Data positive (port D) Data negative (port D) VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 14 15 16 17 GND Data positive (port C) Data negative (port C) VCC Dual (fused max. 500mA and power supervision with over current detection) Key 6 Key 12 18 A26361-D1219-Z180-3-7619 9 Mechanics CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector (processor fan - controlled and supervised, only for 3 pin fans) Pin 1 2 3 Signal 1 GND Controlled fan voltage (0 V / 6...12 V) Fan sense 10 A26361-D1219-Z180-3-7619 Mechanics Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal Monitor on PS FAN control (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) A26361-D1219-Z180-3-7619 11 Mechanics Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4. Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5.0 V +12 V -12 V +3.3 V +5.0 V Maximum variation ±5 % ±5 % ±10 % ±5 % ±5 % Maximum current 15 A 350 mA 200 mA 4A 2A Comment Power loadability Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port VGA connector Universal serial bus (USB) Port A Universal serial bus (USB) Port B Maximum function current Not specified Not specified Not specified Minimum 50 mA 500 mA 500 mA 2 3 500 mA 500 mA 12 A26361-D1219-Z180-3-7619 Documentation Documentation Ê Ê Ê Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START.EXE file in the main directory of the CD. Select your system board or your device. Select Documentation. Select - Technical Manuals Select - Technical Manuals (BIOS) i You may have to install the Acrobat Reader - Software on the CD-ROM (path: utls/acrobat) before reading! For more details please read the according readme.txt files. Installing drivers Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD doesn't start automatically call the START.EXE file in the main directory of the CD. If the system board list is displayed select the system board or select under Driver the operating system used and the audio and video drivers. Upgrading main memory Support: Size: Technology: The system needs at least one module. From 32 Mbytes up to 512 Mbytes SDRAM PC100 or PC133 unbuffered DIMM modules. 168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM 2 M, 4 M, 8 M, 16 M and 32 M x 64 bit 2 M, 4 M, 8 M, 16 M and 32 M x 72 bit For one socket 16, 32, 64, 128, 256 or 512 Mbyte SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of ECC modules with non ECC modules is possible. Support for up to 2 or 3 single sided or 2 double sided DIMM modules. Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at PC100 speed. Granularity: A26361-D1219-Z180-3-7619 13 Troubleshooting Troubleshooting Message BIOS update The System BIOS provides optimum support for the processor you have chosen. If the message BIOS update for installed CPU failed appears the microcode required for the processor inserted must still be loaded. Further information on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided. The screen stays blank If your screen stays blank this may have the following cause: The wrong RAM memory module has been inserted Ê See the chapter "Main Memory" for information which memory modules can be used. ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft. If you have any problems with ACPI please ensure that all of your components are supporting ACPI S3 and S4. Operating system Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers). For further information please refer to http://developer.intel.com/technology/iapc/involve.htm. 14 A26361-D1219-Z180-3-7619