User manual FUJITSU 675TX

COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks, and LifeBook is a trademark of Fujitsu Limited. The following are registered trademarks of IBM Corporation:IBM, IBM PC AT, IBM PS/2. The following are registered trademarks of Microsoft Corpora ti on :M S ,M S - DO S , Windows 95. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Phoenix and the Phoenix logo are registered trademarks of Phoenix Technologies,Ltd. Intel and Pentium are registered trademarks and MMX technology is a trademark of Intel Corporation. PC-Doctor is a trademark of watergate.software.inc. SoftPEG is a registered trademark of CompCore Multimedia Inc. LapLink is a registered trademark of Traveling Software Inc. AudioRack is a registered trademark of ESS Technology, Inc. VirusScan is a registered trademark of McAfee Associates Inc. MegaPhone is a registered trademark of Cypress Research Corporation. All other trademarks mentioned herein are the property of their respective owners. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. © Copyright 1997 Fujitsu PC Corporation. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu PC Corporation. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu PC Corporation. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu PC Corporation Address: 598 Gibraltar Drive Milpitas, CA 95035 Telephone: (408) 935-8800 Declares that product: Model: LifeBook 675Tx. Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations is subject to the following two conditions: (1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received ,i n cluding interference that may cause undesired operation. David Woo FULL NAME Fujitsu COMPANY 11/15/97 DATE CAUTION Changes or modification not expressly approved by Fujitsu PC Corporation could void this user's authority to operate the equipment. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. s compliant and a line cord between the modem and the telephone network with a minimum of 26AWG. The REN is used to determine the number of devices that you may connect to your telephone line and still have all of those devices ring when your number is called. Too many devices on one line may result in failure to ring in response to an incoming call. In most, but not all ,a reas the sum of the RENs of all of the devices should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the RENs, contact your local telephone company. If this equipment causes harm to the telephone network, your telephone company may discontinue your service temporarily. If possible,they will notify you in advance. If advance notice is not practical they will notify you as soon as possible. You will also be advised of your right to file a complaint with the FCC. This fax modem also complies with fax branding requirements per FCC Part 68. Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructi on s ,m ay cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on ,t h e user is encouraged to try to correct the interference by one or more of the following measures: s s Notice to Users of the US Telephone Network The LifeBook 600 Series notebook computers are supplied with an internal modem which complies with Part 68 of the FCC rules. On this notebook is a label that contains the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment among other information. If requested, the user must provide their telephone company with the following information: 1. The telephone number to which the notebook is connected. 2. The Ringer Equivalence Number (REN) for this equipment. 3. That the equipment requires a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant. 4. The FCC Registration Number. This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ-11C which is FCC Part 68 s Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet that is on a different circuit than the receiver. This equipment may not be used on coin service telephones provided by your telephone company. Connection to party lines is subject to state tariffs. Contact your state's public utility commission,public service commission or corporation commission for more information. This equipment includes automatic dialing capability. When programming and/or making test calls to emergency numbers: Remain on the line and briefly explain to the dispatcher the reason for the call. s Perform such activities in off-peak hours, such as early morning or late evening. FCC rules prohibit the use of non-hearing aid compatible telephones in the following locations or applications: s s s s s s s Workstations for the hearing impaired. Hotel ,m o tel or apartment lobbies. Stores where telephones are used by patrons to order merchandise. Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars. In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid compatible telephones or jacks for plug in hearing aid compatible telephones which will be provided to hearing impaired customers on request. meets certain telecommunications network protective, operational and safety requirements. The Department does not guarantee the equipment will operate to the user's satisfaction. The LifeBook 600 Series notebook computers are supplied with an internal modem which complies with the Industry Canada certification standards for telecommunication network protection and safety requirements. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certification standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu PC Corporation or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line. The connecting arrangement code for this equipment is CA11A. The Load Number is 3. DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada. Notice to Users of the Canadian Telephone Network The Canadian Industry Canada label identifies certified equipment. This certification means that the equipment s s s All public or semipublic coin-operated or credit card telephones. Elevators ,h i ghways, tunnels (automobile, subway, railroad or pedestrian) where a person with impaired hearing might be isolated in an emergency. Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. Hospital rooms, residential health care facilities, convalescent homes and prisons. The Load Number assigned to each telephone terminal device denotes the percentage of the total load to be connected to a telephone loop or circuit which is used by the device to prevent overloading. The termination on a loop may consist of any combination of devices such that the total of the load numbers of all devices does not exceed 100. Avis Aux Utilisateurs Du Réseau Téléphonique Canadien L'étiquette canadienne Industrie Canada identifie l'équipement certifié. Cette certification signifie que l'équipement satisfait certaines normes de protection,d'exploitation et de sécurité des réseaux de télécommunications. Le département ne garantit pas le fonctionnement de l'équipement à la satisfaction de l'utilisateur. La série LifeBook 600 possèdent un modem interne conforme aux normes de certification d'Industrie Canada pour protéger les réseaux de télécommunications et satisfaire aux normes de sécurité. Avant de connecter cet équipement à une ligne téléphonique,l'utilisateur doit vérifier s'il est permis de connecter cet équipement aux installations de télécommunications locales. L'utilisateur est averti que même la conformité aux normes de certification ne peut dans certains cas empêcher la dégradation du service. Les réparations de l'équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n'est pas expressément approuvée par Fujitsu PC Corp., ou toute défaillance de l'équipement peut entraîner la compagnie de télécommunications à exiger que l'utilisateur déconnecte l'équipement de la ligne téléphonique. Le code d'arrangement de connexion de cet équipement est CA11A. Le numéro de charge est 3. Le numéro de charge assigné à chaque terminal téléphonique indique le pourcentage de la charge totale pouvant être connecté à une boucle ou à un circuit téléphonique, utilisé par ce périphérique afin de prévenir toute surcharge. La terminaison d'une boucle peut être constituée de n'importe quelle combinaison de péri-phériques de sorte que le total de numéros de charge de tous les périphériques n'excède pas 100. CAUTION For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician. This may be particularly important in rural areas. AVERTISSEMENT Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service d'électricité, les lignes téléphoniques et les conduites d'eau métalliques sont connectées ensemble. Les utilisateurs NE doivent PAS tenter d'établir ces connexions eux-mêmes, mais doivent contacter les services d'inspection d'installations électriques appropriés ou un électricien. Ceci peut être particulièrement important en régions rurales. UL NOTICE (FOR AUTHORIZED REPAIR TECHNICIANS ONLY) CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse. CAUTION:Danger of explosion if CMOS battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instruction. WARNING: CMOS and NiCAD batteries may explode if mistreated. Do not recharge,disassemble or dispose of in fire. Table of C ontents Table of Contents PREFACE ..................v SECTION ONE SETTING UP YOUR LIFEBOOK 600 SERIES FROM FUJITSU Unpacking. . . . . . . . . . . . . . . . . . . . 2 Overview of Lifebook 600 Series Features . . . 3 Component Identification . . . . . . . . . . . 5 Top and Front Components . . . . . . . . . . 5 Left Side Panel Components . . . . . . . . . . 6 Right Side Panel Components . . . . . . . . . 7 Rear Panel Components . . . . . . . . . . . . 8 Bottom Components . . . . . . . . . . . . . . 9 LAN Enhancement Unit . . . . . . . . . . . 10 LAN Enhancement Unit Front and Top Components . . . . . . . . . . . . . . 10 LAN Enhancement Unit Rear Components. . . . . . . . . . . . . . 12 LAN Enhancement Unit Bottom Components . . . . . . . . . . . . 13 Power Sources . . . . . . . . . . . . . . . . . 13 Data Security . . . . . . . . . . . . . . . . . 15 ii Starting Your Notebook for the First Time. . 16 User Registration . . . . . . . . . . . . . . . 18 Learning About Your Operating System and Application Software. . . . . . . . . . 19 Internal Modem . . . . . . . . . . . . . . . . 50 Infrared Port . . . . . . . . . . . . . . . . . . 50 Pre-Installed Software . . . . . . . . . . . . . 51 SECTION THREE SECTION TWO USING YOUR LIFEBOOK 600 SERIES FROM FUJITSU Display Panel . . . . . . . . . . . . . Status Indicator Panel . . . . . . . . . Power On . . . . . . . . . . . . . . . Power Off . . . . . . . . . . . . . . . Restarting The System. . . . . . . . . Fujitsu Welcome Center . . . . . . . . Batteries . . . . . . . . . . . . . . . . Integrated Touchpad Pointing Device Using The Keyboard. . . . . . . . . . Volume Control . . . . . . . . . . . . Floppy Disk Drive . . . . . . . . . . . CD-ROM Drive . . . . . . . . . . . . Hard Drive . . . . . . . . . . . . . . . Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 23 27 28 29 29 29 33 34 36 37 39 41 41 CONFIGURING YOUR LIFEBOOK 600 SERIES FROM FUJITSU Boot Sequence . . . . . . . . . . . . . Identifying the Drives . . . . . . . . . BIOS Setup Utility. . . . . . . . . . . Navigating Through the Setup Utility Main Menu ­ Setting Standard System Parameters . . . . . . . . . Advanced Menu ­ Setting Device Feature Controls . . . . . . . . . . Security Menu ­ Setting the Security Features . . . . . . . . . . Power Savings Menu ­ Setting Power Management Feature Controls. . . Boot Menu ­ Selecting the Operating System Source. . . . . . Exit Menu ­ Leaving the Setup Utility . . . . . . . . . . . . . . . . 54 54 55 57 . . . . 58 . . . . 69 . . . . 81 . . . . 86 . . . . 94 . . . . 96 LifeBook 6 00 Series from Fujitsu Table of Contents Setting Up Your Save-to-Disk File Allocation. . . . . . . . . . . . . . . . 99 SECTION FOUR USER INSTALLABLE FEATURES LAN Enhancement Unit . . . External Installation of a Floppy Disk Drive . . . . . External Lithium Ion Battery PC Cards . . . . . . . . . . . Theft Prevention Locks . . . MIDI/joystick Devices . . . . Mouse. . . . . . . . . . . . . Keyboard . . . . . . . . . . . Microphone . . . . . . . . . Stereo Line In Devices . . . . Headphones . . . . . . . . . Stereo Line Out Devices . . . Telephone Lines . . . . . . . . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 107 109 111 112 112 113 113 113 113 113 113 Fast Ethernet Lines . . . . . Serial Port Devices . . . . . Parallel Port Devices . . . . USB Devices . . . . . . . . External Monitor . . . . . . Memory Upgrade Module . Internal Battery. . . . . . . Base Enhancement Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 114 114 114 114 115 118 120 SECTION SIX CARE AND MAINTENANCE Caring for Your Notebook . . . . . . . . . . 148 Increasing Battery Life . . . . . . . . . . . . 149 Caring for Your Batteries . . . . . . . . . . 149 APPENDIX A SPECIFICATIONS Warranty . . . . . . . . . . . . Lifebook 675Tx Specifications. Approvals . . . . . . . . . . . . Popular Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 152 156 156 SECTION FIVE TROUBLESHOOTING Identifying the Problem . . . . . . . . . . Specific Problems . . . . . . . . . . . . . Power On Self Test Messages . . . . . . . Emergency CD-ROM Drive Tray Release . Internal Hard Drive Replacement . . . . . Modem Setup and Commands . . . . . . Restoring Your Pre-Installed Software From CD-ROM . . . . . . . . . . . . . . 122 123 140 143 144 145 APPENDIX B GLOSSARY Glossary. . . . . . . . . . . . . . . . . . . . 157 INDEX Index . . . . . . . . . . . . . . . . . . . . . 165 . 145 iii Preface LifeB o ok 60 0 Series from Fujit su TM Preface PREFACE The LifeBook 600 Series from Fujitsu PC Corporation is a powerful ultra portable notebook computer. It is powered by an Intel Pentium microprocessor with MMX technology, has a built-in color display, an internal modem and comes with a LAN Enhancement Unit with built-in floppy disk drive, CD-ROM drive,and network adapter bringing the computing power of desktop personal computers (PCs) to a portable environment. This manual explains how to operate your LifeBook 600 Series' hardware and built-in system software. The LifeBook 600 Series is compatible with the IBM PC AT. It comes with Windows 95 pre-installed. A LifeBook 600 Series is a completely self-contained unit with an active-matrix (TFT) colo r LCD display. It has a powerful interface that enables it to support a variety of optional features. (Figure P-1.) CONVENTIONS USED IN THE GUIDE Screen examples in this manual are int ended as examples only, and screen and file names may differ in actual use. Messages displayed on screen by the LifeBook 600 Series,and commands that you enter into the computer using the keyboard,appear in Courier type. Example: Shutdown the computer? Keyboard keys are shown in boldface Helvetica type. Example: Fn, F1, Esc, and Ctrl. Pages with additional information about a specific topic are cross-referenced within the text. Example: (See page xx.) POINT The point icon highlights information that will enhance your understanding of the subject material. CAUTION The caution icon highlights information that is important to your safety, to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully. vi LifeB ook 60 0 Series from Fuj itsu Lif eBook 600 Series f rom Fujitsu Figure P-1 LifeBook 600 Series with Both Fujitsu and Third Party Options vii Section S et tin g U p Yo u r Li f eB oo k 6 0 0 Ser ie s Unpacking . . . . . . . . . . . . . . . . . . . 2 Overview of LifeBook 600 Series Features . . . 3 Component Identification . . . . . . . . . . . 5 Top and Front Components . . . . . . . . . . 5 Left Side Panel Components . . . . . . . . . . 6 Right Side Panel Components . . . . . . . . . 7 Rear Panel Components . . . . . . . . . . . . 8 Bottom Components . . . . . . . . . . . . . . 9 LAN Enhancement Unit. . . . . . . . . . . . 10 LAN Enhancement Unit Front and Top Components . . . . . . . . . . . . . . 10 LAN Enhancement Unit Rear Components . . 12 LAN Enhancement Unit Bottom Components 13 Power Sources . . . . . . . . . . . . . . . . 13 Data Security . . . . . . . . . . . . . . . . . 15 Starting Your Notebook for The First Time . . 16 User Registration . . . . . . . . . . . . . . . 18 Learning About Your Operating System and Application Software. . . . . . . . . . 19 One Section One SECTION ONE SETTING UP YOUR LIFEBOOK 600 SERIES FROM FUJITSU This section describes how to set up your LifeBook 600 Series from Fujitsu. We strongly recommend that you read it before using your notebook ­ even if you are already familiar with notebook computers. s s s s s RJ-11 cable (located in the accessories box). Getting Started Guide. User's Guide. Microsoft Windows 95 Manual. Registration card and customer information pack. Recovery CD-ROM (located in the accessories box). Additional equipment and/or documentation depending on the option package you have purchased. Figure 1-2 AC Adapter Unit s UNPACKING When you receive your notebook,unpack it carefully, and compare the parts you have received with the items listed below. For a standard configuration you should have: s s s LifeBook 600 Series from Fujitsu. (Figure 1-1.) AC adapter with AC power cord (located in the accessories box). (Figure 1-2.) External Lithium ion battery (located in the accessories box). (Figure 1-3.) LAN Enhancement Unit (located in the accessories box). (Figure 1-4.) Figure 1-1 LifeBook 600 Series Notebook Figure 1-3 External Lithium ion Batter y s s 2 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s OVERVIEW OF LIFEBOOK 600 SERIES FEATURES The LifeBook 600 Series is a compact, yet powerful notebook computer available with standard features including: (See Appendix A, pages 152-156, for detailed information on individual models.) s CAUTION Your internal modem is designed to allow faster downloads from K56flex compliant digital sources. Maximum achievable download transmission rates may not reach 56 Kbps and will vary with line conditions. s 200Hz Intel Pentium processor with MMX technology. 32MB SDRAM standard, expandable to 96MB. 12.1" active-matrix (TFT) color display with 1024 x 768 resolution (XGA). 2MB video RAM. Built-in 3.2GB hard drive. Internal Lithium ion battery. External Lithium ion battery. Hot swap connection for an external keyboard or an external mouse. Internal 56K fax/data/voice modem with built-in telephony and DSVD support. Figure 1-4 LAN Enhancement Unit s Integrated touchpad pointing device for easy cursor control. LAN Enhancement Unit with: s s s Once you have checked and confirmed that your notebook system is complete, connect the AC adapter and follow the instructions starting on page xx to accept the conditions for using the LifeBook 600 Series. When you have completed the setup process please register your notebook. (See page 18.) s s s s s s s s s s s s s s Fixed 3.5" floppy disk drive. Fixed 20-speed maximum CD-ROM drive. Built-in stereo speakers. Fast Ethernet port. Dual USB port. Stereo Line Out port. Composite Video jack. MIDI/joystick port. Hot swap connection for an external keyboard and an external mouse. 3 Section One s s s s s Serial port. Parallel port. External Monitor port. DC Power jack. 16-bit SoundBlaster-compatible sound chip. 3D-Stereo for multiple speaker effects. 3D-Graphics for NeoMagic fast graphic rendering. Zoomed Video support for full motion video acceleration. Built-in mono speaker. Built-in mono microphone. Stereo Line In jack. Stereo Headphone jack. Microphone jack. s Fast IrDA (4Mbps) compatible infrared port for wireless data transfer. External monitor support with simultaneous display capabilities. "No re-learning", full-size keyboard with three dedicated Windows 95 keys. Dual USB device support. Standard pre-installed software: s s s s s Full audio and video features: s MegaPhone by Cypress Research for telephone applications including fax, dialing, and speakerphone. Some models may include additional software. s s s s s s s s s s s s s s s s Two Type II/one Type III PC Card slots. Microsoft Windows 95 operating system. LapLink from Traveling Software for file transfers via modem,cable or infrared port. PC-Doctor for system diagnostics. SoftPEG from CompCore for MPEG-1 video playing. McAfee VirusScan for virus protection. ESS AudioRack for 3D-Stereo, audio CD, and other audio controls. Figure 1-5 Top and Front Panel 4 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s COMPONENT IDENTIFICATION Display For detailed specifications on each model refer to Appendix A on pages 152-156. TOP AND FRONT COMPONENTS Display Panel This is a color LCD panel with back lighting for the display of text and graphics. (Figure 1-6.) Brightness Control The brightness control adjusts the overall intensity of the display panel back lighting. (Figure 1-6.) Built-in Microphone The built-in microphone allows mono audio input to your notebook. (Figure 1-6.) Status Indicator Panel LCD display of the status of the power state and source, Suspend mode, battery charge, floppy disk drive activity, hard drive activity, CD-ROM drive activity, PC Card activity, CapsLock, NumLk and Scr Lk. (Figure 1-6.) Status Indicator Panel Speaker Keyboard Touchpad Pointing Device Brightness Control Microphone Closed Cover Switch Enhancement Unit Alignment Hole Display Panel Latch Suspend/Resume Button Enhancement Unit Alignment Hole Figure 1-6 LifeBook 600 Series with Display Open 5 Section One Suspend/Resume Button (Undock Request Button) The Suspend/Resume button allows you to suspend notebook activity without turning off the notebook power, and to return it to an active state. This feature saves power, and is particularly useful when the notebook is running only on battery power. (See pages 42-43 and 88-89 for more information.) When you are using the LAN Enhancement Unit you can set the Suspend/Resume button to operate as an Undock Request button. (Figure 1-6.) CAUTION Be sure you know what settings are active for your Suspend/Resume button before you use it as misuse can result in data loss. (See the Power Savings Menu of the BIOS Setup Utility, pages 88-89, for more information.) Speaker The built-in speaker outputs sound from the notebook. (Figure 1-6.) Closed Cover Switch The closed cover switch turns off the LCD back lighting when the display panel is closed,thus saving power. (Figure 1-6.) Keyboard A full-size keyboard with dedicated Windows 95 keys for input into the notebook. (Figure 1-6.) Touchpad Pointing Device The touchpad pointing device is a finger contact cursor control system with two click buttons. (Figure 1-6.) Display Panel Latch This latch locks and releases the display panel. (Figure 1-6.) When the display panel is released it pops up slightly to make it easier to open. Enhancement Unit Alignment Holes Holes that allow your notebook to align and lock into an Enhancement Unit. Power PC Card PC Card Switch Lock Slots Slot 2 Eject Button Slot 1 Eject Button Figure 1-7 LifeBook 600 Series Left Side Panel LEFT SIDE PANEL COMPONENTS Power Switch This switch is the main power switch for your notebook. (Figure 1-7.) PC Card Slots The PC Card Slots allows you to install two type I or II PC Cards or one type III PC Card. (See pages 109-111 for more information on PC Cards.) The sliding button to the left of the card slots locks the card(s) in place,and the push buttons to the right of the slots eject the cards from the slots. (Figure 1-7.) 6 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s Volume Control Stereo Line In Jack CAUTION The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a digital PBX as it may cause serious damage to the internal modem or your entire notebook. Consult your PBX manufacturer's documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. Microphone Jack The microphone jack allows you to connect an external mono microphone. (Figure 1-8.) Stereo Line In Jack The stereo line in jack allows you to connect an external audio source to your notebook, like an audio cassette player. This jack will not support an external microphone. (Figure 1-8.) Headphone Jack You can connect headphones or powered external speakers to the headphone jack. (Figure 1-8.) Volume Control The volume control is a knob which p rovides manual control of the sound level of all audio output from your notebook. (Figure 1-8.) CAUTION There are software volume controls. The knob setting and the software settings will interact. Software volume off will override the knob setting and the software volume setting will control the maximum knob setting. (See Volume Control on pages 36-37 for more information.) Headphone Microphone Jack Jack Theft Prevention Lock Slot Figure 1-8 LifeBook 600 Series Right Side Panel RIGHT SIDE PANEL COMPONENTS Theft Prevention Lock Slot This is a slot that allows you to attach a physical lock down device. (Figure 1-8.) RJ-11 Jack This is the jack for attaching a telephone line to the internal modem. (Figure 1-8.) 7 Section One Infrared Dual USB Port Port Parallel Port External External Monitor Port Floppy Disk Drive Port DC Power Jack CAUTION The connector cover ­ which closes over the ports on the rear of the notebook ­ can be damaged if it is left open when the notebook is moved around. PS/2 Port This port allows you to connect an external PS/2 mouse or keyboard. (Figure 1-9.) Dual USB Port This port allows you to connect two Universal Serial Bus devices, such as external game pads, pointing devices, keyboards and speakers. (Figure 1-9.) Parallel Port The parallel port allows you to connect parallel devices, such as a parallel printer to your notebook. (This is also referred to as an LPT port.) (Figure 1-9.) External Monitor Port This port allows you to connect an external VGA or SVGA CRT monitor. (Figure 1-9.) External Floppy Disk Drive Port A port for attaching an optional external floppy disk drive. (Figure 1-9.) External Battery Locking Slots A pair of slots that mate with the locking tabs on the external Lithium ion battery. DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional auto/airline adapter. (Figure 1-9.) xternal attery ocking Slot PS/2 Port External Connector Cover Port Cover Battery Locking Slot Figure 1-9 LifeBook 600 Series Rear Panel REAR PANEL COMPONENTS Infrared Port The fast IrDA (4Mbps) compatible port allows you to communicate with another IrDA compatible infrared device without a cable. (See pages 50-51 for more information.) (Figure 1-9.) 8 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s External Battery Locking Indentations External Battery Port This slide covered slot provides for installation of the external battery. (Figure 1-10.) Docking Lock Slots These slots mate with the latch hooks of an Enhancement Unit to lock the Enhancement Unit and the notebook together. (Figure 1-10.) Unit Label This label has the model number and other information about your notebook. In addition the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative so that he or she can help you. It exactly identifies the version of various components of your notebook. (Figure 1-10.) Docking Port This port is for connection to an Enhancement Unit. The cover opens automatically when your notebook is installed in an Enhancement Unit. (Figure 1-10.) Docking Port External Battery Port Unit Label Docking Lock Slot Memory Upgrade Compartment This compartment houses the memory upgrade module which allows you to expand the system memory capacity of your notebook. (See pages 115-118 for more information on installing added memory capacity.) (Figure 1-10.) Internal Hard Drive Compartment This compartment contains the internal hard drive and should only be accessed for maintenance by an authorized maintenance provider. (Figure 1-10.) Internal Battery Compartment This compartment houses the internal battery and should only be opened to remove the battery for replacement or long term storage. (Figure 1-10.) Docking Lock Slot Memory Upgrade Compartment Internal Battery Compartment Internal Hard Drive Compartment Figure 1-10 LifeBook 600 Series Bottom BOTTOM COMPONENTS External Battery Locking Indentations These indentations mate with the latches on the external battery to provide secure mating between the battery and your notebook. (Figure 1-10.) 9 Section One LAN ENHANCEMENT UNIT Docking Latch External Battery Compartment LAN ENHANCEMENT UNIT FRONT AND TOP COMPONENTS Docking Connector Left Speaker Enhancement Unit Alignment Pins A pair of pins that push into the Enhancement Unit Alignment holes in the front of your notebook to assure proper alignment between the LAN Enhancement unit and your notebook and act as part of the locking between the two. (Figure 1-11.) Docking Latches A pair of hooks which fit into the docking lock slots in the bottom of your notebook and lock your notebook and LAN Enhancement Unit together. (Figure 1-11.) External Battery Compartment A space that allows your notebook to be installed in the LAN Enhancement Unit with the external battery installed. Docking Connector This is the connection to the Docking port in the bottom of your notebook. (Figure 1-11.) Enhancement Unit Alignment Pins Latch Release Lever CD-ROM Drive Docking Latch Right Speaker Floppy Disk Drive Docking Indicator Figure 1-11 LAN Enhancement Unit Front View 10 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s Latch Release Levers The Latch Release levers,(one on each side of the LAN Enhancement Unit), operate the Docking latches. (Figure 1-11.) CD-ROM Drive This drive provides CD-ROM input to your notebook. (Figure 1-11.) CAUTION Do not operate the CD-ROM drive unless your LAN Enhancement Unit is sitting on a flat, level surface. Using a CD-ROM drive when it is not level may damage the drive or prevent proper operation. CAUTION The CD-ROM drive requires the use of a power adapter or both an internal and external battery. It will NOT operate on the internal battery alone. Floppy Disk Drive This 3.5" floppy disk drive provides your notebook with floppy disk input and output. (Figure 1-11.) POINT The optional external floppy disk drive and the LAN Enhancement Unit floppy disk drive can NOT both be enabled at the same time. (See pages 54 and 94-95 for more information.) Stereo Speakers This provides stereo sound output from your notebook. (Figure 1-11.) Docking Indicator This LED is off when Windows 95 is active or there is no notebook in the LAN Enhancement Unit. The LED is green when undocking has been requested and the system is ready to undock. CAUTION It is only safe to undock your notebook from the LAN Enhancement Unit when the Docking Indicator is green or the power to the notebook is turned off at the power switch. 11 Section One LAN ENHANCEMENT UNIT REAR COMPONENTS Composite Video Jack Dual USB Port Enhancement Unit Alignment Pins Anti-theft Lock Slot Anti-theft Lock Tab Keyboard PS/2 Port Mouse PS/2 Port MIDI/Joystick Port DC Power Jack Serial Port Stereo Line Out Jack External Monitor Port Parallel Port Left Speaker Anti-theft Lock Slot This provides a way to secure your LAN Enhancement Unit to a physical lock down device. (Figure 1-12.) Anti-theft Lock Tab This provides a way to secure your LAN Enhancement Unit to your notebook with the same physical lock down device that is locking your notebook. (Figure 1-12.) Dual USB Port Allows you to connect two USB devices, such as external game pads, pointing devices, keyboards and speakers. (Figure 1-12.) Stereo Line Out Jack This jack allows you to connect stereo sound recording equipment. (Figure 1-12.) Composite Video Jack This jack allows you to connect, and use directly, any Composite Video device (NTSC or PAL), such as a VCR or TV. (Figure 1-12.) Figure 1-12 LAN Enhancement Unit Rear View 12 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s Keyboard PS/2 Port The port allows you to connect an external PS/2 keyboard or numeric keypad. (Figure 1-12.) Mouse PS/2 Port The port allows you to connect an external PS/2 mouse. (Figure 1-12.) MIDI/Joystick Port (MPU-401) This port allows you to connect a music synthesizer, game joystick, or other MIDI device to your notebook via a custom adapter cable which is included with your notebook. (Figure 1-12.) Serial Port The serial port allows you to connect serial RS-232C devices, such as serial printers or scanners. (This is also referred to as a COM port.) (Figure 1-12.) Parallel Port The parallel port allows you to connect parallel devices, such as a parallel printer to your notebook. (This is also referred to as an LPT port.) (Figure 1-12.) External Monitor Port This port allows you to connect an external VGA or SVGA CRT monitor. (Figure 1-12.) DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional auto/airline adapter. (Figure 1-12.) LAN ENHANCEMENT UNIT BOTTOM COMPONENTS Ethernet Port This RJ-45 jack allows you to connect to a 10/100 Base-T Ethernet LAN. (Figure 1-13.) Ethernet Cable Slot This slot provides a place for your Ethernet cable so that it does not interfere with your LAN Enhancement Unit sitting level. (Figure 1-13.) Configuration Label This label has manufacturer information that you will need to provide to your support representative if you ever need assistance with your LAN Enhancement Unit. (Figure 1-13.) POWER SOURCES Your notebook has four possible power sources: the internal Lithium ion battery; an external Lithium ion battery; the AC adapter; or an optional auto/airline adapter. Ethernet Cable Slot Ethernet Port Configuration Label Figure 1-13 LAN Enhancement Unit Bottom View 13 Section One To Connect the AC Adapter to your Notebook 1.Plug the DC output cable of the AC adapter into the DC power jack on the rear panel of your notebook. 2.Plug the AC adapter into an AC electrical outlet. To Connect an Optional Auto/Airline Adapter to your Notebook 1.Plug the DC output cable into the DC power jack on the rear panel of your notebook. 2.Plug the auto/airline adapter connector into the cigarette lighter of a car or other vehicle with the ignition key in the On or the Accessories position.Or plug the auto/airline adapter plug into the power jack on the seat in airplanes that are equipped to support powered electronic devices. To Switch From AC Adapter Power To Battery Power for your Notebook Alone 1. Be sure that you have at least one charged battery installed. 2. Remove the AC or auto/airline adapter. CAUTION Neither the internal nor the external Lithium ion battery is charged when you purchase your notebook. Initially you will need to connect the AC adapter or an optional auto/airline adapter to use the notebook and charge the batteries. It can take up to 3 hours to charge a single battery if the notebook is Off or in Suspend mode. If your notebook is in use it can take up to 9 hours or more to charge a single battery. Figure 1-14 Connecting the AC Adapter to your Notebook Connecting the Power Adapters The AC adapter or an optional auto/airline adapter provides power for operating your notebook, with or without the LAN Enhancement Unit, and charging the batteries. (Figure 1-14.) 14 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s To Connect an Optional Auto/airline Adapter to your LAN Enhancement Unit 1.Plug the DC output cable into the DC power jack on the rear panel of your LAN Enhancement Unit. 2.Plug the auto/airline adapter connector into the cigarette lighter of a car or other vehicle with the ignition key in the On or the Accessories position.Or plug the auto/airline adapter plug into the power jack on the seat in airplanes that are equipped to support powered electronic devices. To Switch From AC Adapter Power To Battery Power with the LAN Enhancement Unit Installed 1. Be sure that you have both an internal and an external charged battery installed. 2. Remove the AC or auto/airline adapter. POINT Power to the LAN Enhancement Unit is switched on and off with the notebook power switch. DATA SECURITY Your LifeBook 600 Series has a built-in hardware control password security feature that allows you to protect the data stored in the notebook from unauthorized access. Your operating system and some applications have software control password security features that allow you to protect all or portions of the data stored in the notebook from unauthorized access. Hardware Data Security Features When you are using your notebook's built-in hardware control password to gain access to the notebook the actual password will not ap pear on the screen. This is a safety precaution. The hardware control security parame ters are set Figure 1-15 Connecting the AC Adapter to your LAN Enhancement Unit To Connect the AC Adapter to your LAN Enhancement Unit 1.Plug the DC output cable of the AC adapter into the DC power jack on the rear panel of your LAN Enhancement Unit. 2.Plug the AC adapter into an AC electrical outlet. 15 Section One from the BIOS setup utility. (See Security Menu on pages 81-85 for more information on setting and clearing passwords and enabling and disabling built-in security features.) Software Data Security Features The operating system and some applications have security features that are independent of the built-in hardware protection features that are controlled from the BIOS. See your software documentation for more information about these features. CAUTION Make sure you memorize your passwords, both hardware and software. If you forget, you may not be able to use the notebook, and you will have to contact your service provider and arrange to have them reset the hardware system password. See your software manuals for what to do if you forget your software security password(s). CAUTION Software security feature passwords may not be the same as the hardware security passwords. Be sure you know which features are controlled from software and which from hardware or you may lock yourself out of your own data or lock up your hardware and not be able to operate your notebook. STARTING YOUR NOTEBOOK FOR THE FIRST TIME Booting the System The first time that you turn on your notebook you will need to attach your AC adapter because the battery is not charged when you get your machine. We strongly recommend that you not attach any other external devices and do not put any CD or floppy disk in your drives until you have gone through the initial power on sequence. When you turn on your notebook for the first time it will display a Fujitsu logo on the screen. If you do nothing the system will read the hard drive for the operating system software, flash the notebook configuration information on the screen,and then the Windows 95 Setup Wizard Screen will appear. (See Power On on pages 27-28 for additional help.) You will then be stepped through the condition of use process. You must complete this initial process before you will be able to use your notebook.(If you wish to access the BIOS setup utility before you go through the condition of use process you must press the F2 key while the Fujitsu logo is still visible. If you press the Esc key while the Fujitsu logo is still present you will get a dialog box which will allow you to sele ct which drive is to be used for finding the operating system.) If you turn off the power without using the on screen Cancel button you will get an error message when you start your notebook again. 16 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s Conditions of Use The first time you start your notebook you must confirm your acceptance of the copyright limitations for your pre-installed software. After you complete the Condition of Use process these screens will not appear again. There are six (6) screens to read carefully and respond to. You cannot use your notebook until this Condition of Use process is completed. The bottom of each screen has a button and a Cancel button which are activated by clicking the integrated ErgoTrac pointing device button with the cursor on the screen button. The button activates any choices or information you have entered and takes you on to the next screen. The Cancel button allows you to stop the setup process. If you stop the process before the setup is complete your notebook will startup at the beginning of the Windows 95 Setup Wizard. The screens you will be required to respond to are described with the required action. User Information Fill in your name and your company name as you want them to appear on the software license. To step from the name blank to the company blank press the Tab key. When the information has been entered click on the Next> button. You will not be allowed to continue until you make an ent ry. License Agreement Read the agreement carefully. You can scroll through the text using the integrated touchpad, the pointing device on the scroll bar, the up arrow and down arrow keys to move up and down the text one line at a time, or use the Page Up and Page Down keys to move the text one screen at a time. When you finish reading you must point and click to accept or reject the terms of the agreement and then click on the Next> button. POINT If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows 95 or to shut down your notebook. Certificate of Authenticity Look in the box that your notebook came in and you will find a Windows 95 Certificate of Authenticity shrink wrapped with the Windows 95 User's manual. On the certificate you will find a bar-code with a number above it. This is your product code and the number you should enter on the Certificate of Authenticity screen. When you have entered the number exactly as shown then click on the Next> button. Start Wizard The Start Wizard screen will appear if you have entered a valid product code. When you click on the Finish button the display will flash various screens as the system identifies what hardware is installed and runs a virus check. 17 Section One Time Zone When your notebook has completed identifying all of the installed hardware it will display a dialog box for entering which time zone you wish to set in the clock. Windows Messaging Once you have selected a time zone you will see a screen announcing that Windows messaging is being set up. Printer Setup When the messaging setup is complete a dialog box will appear for selecting which printer is to be attached to your notebook. You do not have to select a printer at this time. If you do not wish to select a printer, click on the Cancel button. If you do wish to sele ct a printer click on the Next button and answer the questions. Welcome to Windows 95 Once you have completed the printer setup or chosen not to set up a p rinter at this time you will see the Welcome screen for Windows 95. You can choose: Windows Tour; What's New; Online Registration; or Close. You are now in the Windows 95 operating system and the Condition of Use process will not be repeated. POINT You will find a Recovery CD-ROM packet in your accessories box. Please store the packet in a safe place in case there is a loss of data and it becomes necessary to re-install your operating system and and/or application programs. (See Restoring Your Pre-installed Software from the Recovery CD-ROM on page 145.) USER REGISTRATION There are three ways to register your notebook. 1. The registration card provided in the box with your LifeBook 600 Series which can be filled out and mailed. 2.A registration form behind the Fujitsu Welcome Center icon which can be filled out on your notebook and sent in a variety of ways, including printing and mailing, faxing or e-mailing. 3. Telephone registration by calling the Fujitsu PC service and support line at 1-800-8FUJITSU (1-800-838-5487). 18 LifeBook 6 00 Series from Fujitsu Se t t i n g U p Yo u r L i fe B oo k 60 0 Se r i e s LEARNING ABOUT YOUR OPERATING SYSTEM AND APPLICATION SOFTWARE Tutorials All operating systems and most application software have tutorials built-in. We highly recommend that you step through your tutorial before you use an application even if you are familiar with the same application on a different machine,an earlier version of the application, or with a similar p roduct. Manuals In the accessories box you will find manuals for Windows 95 and other pre-installed software. Software manuals of pre-installed software that are not in the accessories box are available online. See the help screens of your pre-installed software. We recommend that you review these manuals for general information on the use of these applications and to get a basic understanding of what is covered in the manual,and how it is organized,should questions arise as you use the applications. 19 Section Using Your LifeBook 600 Series from Fujitsu Display Panel . . . . . . . . . . . . . . . . . 22 Status Indicator Panel . . . . . . . . . . . . . 23 Power On . . . . . . . . . . . . . . . . . . 27 Power Off . . . . . . . . . . . . . . . . . . 28 Restarting the System . . . . . . . . . . . . 29 Fujitsu Welcome Center . . . . . . . . . . . 29 Batteries . . . . . . . . . . . . . . . . . . . 29 Integrated Touchpad Pointing Device. . . . . 33 Using the Keyboard. . . . . . . . . . . . . . 34 Volume Control . . . . . . . . . . . . . . . . 36 Floppy Disk Drive . . . . . . . . . . . . . . . 37 CD-ROM Drive . . . . . . . . . . . . . . . . 39 Hard Drive . . . . . . . . . . . . . . . . . . 41 Power Management . . . . . . . . . . . . . 41 Internal Modem . . . . . . . . . . . . . . . 50 Infrared Port . . . . . . . . . . . . . . . . . 50 Pre-Installed Software . . . . . . . . . . . . 51 Two Section Two SECTION TWO USING YOUR LIFEBOOK 600 SERIES FROM FUJITSU This section describes the indicators, buttons, connections and operating modes of your LifeBook 600 Series and their use. front of the notebook body. When the display panel is released it pops up slightly to make it easier to open.Lift the display panel backward until the screen is at a comfortable viewing angle. (Figure 2-1.) Adjusting the Display Panel When you turn on your notebook, you may want to adjust the brightness level of the screen for best visibility. To do this, adjust the brightness control slider at the right side of the display panel. (Figure 2-2.) You may need to adjust the brightness periodically for different operating environments. POINT The higher the brightness level, the more power the notebook will consume and the faster your batteries will discharge. For maximum battery life, make sure that the brightness is set as low as possible (control all the way to the bottom). Brightness Control Brighter Less Bright Figure 2-1 Opening the Display Panel Figure 2-2 Display Adjustments DISPLAY PANEL Opening the Display Panel Pressing the latch on the front of your notebook releases the top of the display panel from the 22 LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series STATUS INDICATOR PANEL The Status Indicator panel is located in the recess just above the keyboard. (Figure 2-3.) The appropriate indicators become visible as you use your notebook. Power Indicator The Power indicator tells you when the system is operational. It is on steady when there is power to your notebook,and blinks when the system is in Suspend mode. It goes off when the system has entered Save-to-Disk mode,has entered the Windows 95 pseudo-off state, or the power is turned off from the power switch. POINT When your notebook has been shut down from Windows 95, it is not the same as when it is turned off from the power switch. It is in a pseudo-off state, with all applications closed, but can be turned on by pressing the Suspend/ Resume button. It is drawing some current in the pseudo-off state. 23 Figure 2-3 Status Indicator Panel Section Two CAUTION Your notebook must be turned off with the power switch to prevent all current draw. AC Adapter Indicator The AC Adapter indicator tells you whether the system is operating on an AC or auto/airline adapter, or is running on batteries alone. The indicator is On when either of the adapters is active and Off when power comes from the batteries alone. If a battery is charging, the Power Adapter indicator is active regardless of the setting of the power switch. The AC Adapter indicator is also active in the Windows 95 pseudo-off state, regardless of the battery status. If there is no battery charging, and the power switch is Off,then the AC Adapter indicator and the Battery indicators will all be Off. Battery Indicators The two sets of battery indicators show whether or not the internal Lithium ion battery and the external Lithium ion battery are installed,and indicate the condition of each. (Figure 2-3.) Battery 1 is the internal Lithium ion battery and Battery 2 is the external Lithium ion battery. The battery indicators are displayed only for a battery which is installed. A small arrow icon (Battery Charging indicator) appears to the left of each of the Battery Level indicators and above the number (Battery identifier) if that battery is charging. The Battery Charging indicator flashes if the battery is too hot or too cold to charge. (Figure 2-3.) The Battery Charging indicators operate whether the power switch is Off or On. The symbols inside the battery outline of the Battery Level indicator show the operating level available in that battery. (Figure 2-4.) If there is no battery charging and the power switch is Off then the AC Adapter indicator and the Battery indicators will all be Off. CAUTION A shorted battery is damaged and must be replaced. (Figure 2-4.) CAUTION Turning off the power with the power switch or using the Suspend/Resume button when any of the Access indicators are On may cause loss of data and/or system errors. CAUTION Batteries should not be subjected to shocks, vibration or extreme temperature as it can cause permanent damage. 24 LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series 76% ­ 100% 51% ­ 75% CD-ROM Access Indicator The CD-ROM access indicator tells you the CD-ROM drive is being accessed. The CD-ROM drive Access indicator will flash when the software tries to access an audio CD or a CD-ROM even if no drive is installed. POINT The Windows 95 CD automatic insertion function will periodically check for a disk installed in the drive, causing the CD-ROM Access indicator to flash. The CD automatic insertion function allows your system to automatically start a disk as soon as it is inserted in the drive and the tray is closed. It will begin playing an audio CD or will start an application if the disk has an auto run file on it. POINT To disable the CD automatic insertion function do as follows: 1. Save all data and close all applications. 2. Click on the Start button. 3. Point to Settings . 4. Click on the Control Panel. The control panel window will be displayed. 5. Double click on the System icon. The system properties dialogue box will be displayed. 6. Click on the Device Manager tab. The device list will be displayed. 7. Click on the + to the left of the CD-ROM icon. The CD-ROM drive manufacturer's name and model will be displayed. 8. Click on the CD-ROM drive manufacturer's name and model. 9. Click on Properties. The CD-ROM drive manufacturer's name and model properties dialogue box will be displayed. 25 26% ­ 50% 13% ­ 25% Low Battery Warning 12% Dead Battery Shorted Battery Figure 2-4 Battery Level Indicator If you do not wish to have the CD automatic insertion function active you can disable it. Section Two 10. Click on the Settings tab. 11. Click on the automatic insertion notifi cation box to toggle it off. 12. Click on OK. 13. Click on OK in the system properties dialogue box. 14. Restart your notebook according to the message displayed. You can re-enable the function by repeating the process, except in step 11 change the setting to On. Hard Drive Access Indicator The Hard Drive Access indicator tells you when the internal hard drive is being accessed. Floppy Disk Drive Access Indicator The Floppy Disk Drive Access indicator tells you a floppy disk drive is being accessed, regardless of whether the floppy disk drive being accessed is the one built-in the LAN Enhancement Unit or an optional external one. The Floppy Disk Drive Access indicator will 26 flash when your software tries to access a floppy disk drive even if no floppy disk drive is installed. PC Card Access Indicators The PC Card Access indicator tells you when an installed PC Card is being accessed. Card 1 is the bottom connector inside the slot and Card 2 is the upper connector inside the card slot. Type III cards are always Card 1 only. The PC Card Access indicator will flash if your software tries to access a PC Card even if none are installed. POINT Windows 95 displays of PC Card slot numbers may be different than the Status Indicator panel display of slot numbers. NumLk Indicator The NumLk indicator tells you the internal keyboard is set in ten-key numeric mode. (See page 35 for more information on the numeric keypad.) You can activate the NumLk mode by pressing the Scr Lk/NumLk key while holding down the Shift key. Deactivate the mode the same way that you activated it. CapsLock Indicator The CapsLock indicator tells you when the keyboard is set for all capital letters. Activate the capitals lock mode by pressing the CapsLock key on the keyboard. Deactivate the mode the same way that you activated it. Scr Lk Indicator The Scr Lk indicator tells you when you are in scroll lock mode. You can activate or deactivate the scroll lock mode by pressing the Scr Lk/ NumLk key. Deactivate the mode the same way that you activated it. LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series CAUTION After turning off your notebook, make sure that it has been Off at least 10 seconds before turning the power switch to On. If you do not you could cause a system error. When you turn on your notebook be sure you have a power source. This means that at least one battery is installed and charged, or that the AC adapter or the auto/airline adapter is connected and has power. Figure 2-5 Power Switch CAUTION Neither the internal nor the external Lithium ion battery is charged when you purchase your notebook. Initially you will need to connect the AC adapter or an optional auto/airline adapter to use the notebook and charge the batteries. It can take up to 3 hours to charge a single battery if the Notebook is Off or in Suspend mode. If your notebook is in use it can take up to 9 hours or more to charge a single battery. When the power switch is turned on, your notebook carries out a Power On Self Test (POST) to check the internal parts and configuration. If a fault is found a b eep will sound and/or an error message will be displayed. (See Troubleshooting on pages 140-142.) Depending on the nature of the problem you may be able to continue by starting the operating system or by entering the setup utility and revising the settings. On CAUTION POWER ON Facing the keyboard and display panel, move the power switch towards the rear of your notebook. This is the On position. (Figure 2-5.) When you are done working you can leave your notebook in Suspend mode, (see page 47), or you can turn it off. The power switch moved toward the front of your notebook is in the Off position. (See the section Power Off, page 28, for the recommended shutoff procedures.) Do not carry your notebook around with the power on or subject it to shocks or vibration, as you risk damaging your notebook. 27 Section Two After satisfactory completion of the Power On Self Test (POST) your notebook will load your operating system. (See Boot Options on pages 6768 to see which kind of disk will be the s ource.) CAUTION Never turn off your notebook during Power On Self Test (POST) or it will cause an error message to be displayed when you turn your notebook on the next time. (See the Troubleshooting information on pages 140-142.) panel,and moving the switch toward the front of your notebook. To assure that your notebook shuts down without error, use the Windows 95 shut down procedure. CAUTION Never turn your notebook off while an application is running. Be sure to close all files, exit all applications and shut down your operating system prior to turning off the power with the power switch. If files are open when you turn the power off, you will lose any changes that have not been saved, and may cause disk errors. Shutting down your notebook from Windows 95 lets your notebook shut down operations, and turn off the power in the proper sequence to prevent errors. The sequence is: 1.Go to the Start button menu. 2. Click on ShutDown . 3. Verify that Shut down the computer? is selected and click on Yes . If you are going to store your notebook for a month or more, take the following precautions: 1. Remove any CD and/or floppy disk. 2. After shutting down with Windows 95 turn off your notebook using the power switch. 3. Close your notebook display panel. 4. Disconnect the AC adapter. 5. Remove the batteries and store them separately in a cool dry place. POINT When your notebook has been shut down from Windows 95, it is not the same as being turned off from the power switch. It is in a pseudo-off state, with all applications closed, but can and must be turned on by pressing the Suspend/ Resume button. It is drawing some current in the pseudo-off state. POWER OFF Before turning off the power by putting the power switch in the Off position, check that the Hard Drive,CD-ROM Drive, PC Card and the Floppy Disk Drive Access indicators are all Off. (See Figure 2-3, page 23.) If you turn off the power while accessing a disk or PC Card the re is a risk of loss of data. The Off position is reached by facing the keyboard and display 28 LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series RESTARTING THE SYSTEM When you wish to restart your system be sure that you follow the proper procedure. The procedure is as follows: 1.Go to the Start button menu. 2. Click on ShutDown . 3. Click on Restart the computer? 4. Verify that Restart the computer? is selected and click on Yes . Windows 95 will shutdown and restart your notebook. NOTE: You may also select Shut down the computer? and once the power is off for 10 seconds or more you can restart your notebook with the Suspend/Resume button. You may also select Shut down the computer? and once the Power indicator is off, turn the power switch to Off for 10 seconds or more and then turn the power switch to On. These alternative methods are not recommended. POINT In Windows 95 pressing the Ctrl+Alt+Del keys simultaneously triggers the ShutDown submenu of the Start menu. FUJITSU WELCOME CENTER The Fujitsu Welcome Center is an icon on your Windows 95 desktop. Clicking on it gives you access to product registration forms and instructions, change of address information and forms, contact information including telephone numbers and e-mail addresses, and an accessory catalog with information for ordering accessories for your notebook. Double left-click on the icon and then on the appropriate button for the information selection you wish. CAUTION Turning off the power switch without exiting Windows 95 may cause an error when you start the next time. Turning the power to On when it has been Off for less than 10 seconds may also cause an error when you start the next time. BATTERIES The internal Lithium ion battery is rechargeable with an operating time of up to 2 hours, depending on active power management features and user activity levels. Your notebook can be operated on the internal Lithium ion battery alone or in a dual battery configuration with an external Lithium ion battery. The Lithium ion battery operating time may become shorter than the reference value if it is used under the following conditions: 29 Section Two s When used at temperatures that exceed a low of 5°C or a high of 35°C. High temperatures not only reduce charging efficiency, but can also cause battery deterioration. (The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its o perating temperature range.) The battery charging capacity is reduced as the battery ages. If your battery is running low quickly, you should replace it with a new one. When using a high cur rent device such as a modem,a LAN card,the CD-ROM drive, or the hard drive frequently. CAUTION Actual battery life will vary based on screen brightness, applications, features, power management settings, battery condition, and other customer preferences. Hard drive usage may also have a significant impact on battery life. CAUTION Under federal, state or local law it may be illegal to dispose of batteries by putting them in the trash. Please take care of our environment and dispose of batteries properly. Check with your local government authority for details regarding recycling or disposing of old batteries. If you cannot find this information elsewhere, contact your support representative at 1-800-8FUJITSU (1-800-838-5487). Shorted Batteries If your Status Indicator panel shows a shorted battery, check the installation for that battery by removing and re-installing it. If it still shows that it is shorted, replace it with a new battery. CAUTION A shorted battery is damaged and must be replaced so that it does not damage anything else. s CAUTION Do not leave a faulty battery in your notebook. It might damage your AC adapter, optional auto/airline adapter, another battery, or your notebook itself. It may also prevent operation of your notebook by draining all available current into the bad battery. s Using the AC adapter will conserve your battery when using a high current device such as the modem,a LAN card, or the hard drive frequently. 30 LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series Recharging the Batteries If you want to check the condition of either the internal Lithium ion battery or the external Lithium ion battery, check the Battery Level indicators located on the Status Indicator panel. These indicators change as the battery levels change. Battery 1 is the internal Lithium ion battery and Battery 2 is the external Lithium ion battery. (Figure 2-3 on page 23.) You can also check the PowerPanel toolbar. (See pages 43-47.) The Lithium ion batteries are recharged internally using the AC adapter or auto/airline adapter. To recharge the batteries: s When two Lithium ion batteries are installed, the charge/discharge rate of the internal and external Lithium ion batteries are the same,as they are connected in parallel and are both charging and/or discharging at the same time. Since the rates are the same, one may finish charging or discharging before the other if they were not at the same charge level when they were installed and/or the AC or auto/airline adapter was connected. There is no memory effect on the Lithium ion batteries, which means that you do not need to discharge them completely before recharging. A single fully discharged Lithium ion battery will charge in approximately three (3) hours when your notebook is Off or in Suspend mode. The charging time from fully discharged for two Lithium ion batteries together, is approximately 5 hours when your notebook is Off or in Suspend mode.Of course partially charged batteries will not take as long to charge. The charge times will be significantly longer if your notebook is in use while the batteries are charging (from approximately nine (9) hours for one battery to approximately 15 hours for two batteries with normal operating levels). CAUTION Using heavy current devices such as LAN cards or frequent CD-ROM accesses may prevent charging completely. Low Battery State When the battery is running low, your notebook beeps about every 15 seconds and the Battery Level indicator(s) flash. If you do not respond to the low battery alarm,the batteries will continue to discharge until they are t oo low to operate. When this happens there will be a multiple beep alarm,the Battery Level indicator will show dead battery, and your notebook will go into Suspend mode to try and protect your data as long as possible. Your power management settings do not affect whether the dead battery alarm level will send your notebook into Suspend mode,it will not go to Save-to-Disk mode. (Figure 2-3 on page 23.) 31 Make sure the battery to be charged is installed,then connect the AC adapter or auto/airline adapter. Make sure that the Battery Charging indicator to the left of the Battery Level indicator of the battery to be charged is visible on the Status Indicator panel. The percentage charge is shown inside the Battery Level icon. (Figure 2-4 on page 25.) s s Section Two CAUTION You may not be able to hear the audio alarms if the volume control is set too low or is turned off by either hardware or software but you will still be able to see the Battery Level indicator(s) flash. When the low battery alarm occurs you need to save all your active data and put your not ebook into Suspend mode until you can provide a new power source. You should provide this power as soon as possible. The new power source can be a charged battery or a power adapter, either AC or auto/airline. CAUTION When you are in Suspend mode there must always be at least one power source active. If you turn off the power with the power switch, or remove all power sources, battery, AC adapter, or auto/ airline adapter, while your notebook is in Suspend mode any data which has not been saved to the hard drive will be lost. 32 Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an AC adapter, an optional auto/ airline adapter, or a charged battery. Dead Battery Suspend mode shows on the Status indicator just like the normal Suspend mode. Once you have provided power, you will need to press the Suspend/Resume button to resume operation. In the Suspend mode, your data can be maintained for sometime. If a power source is not provided promptly, the Power indicator will stop flashing and go out,and you will have lost the data that was not stored. Once you provide power you can continue to use your notebook while an adapter is charging the battery, but the battery trickle charges under these conditions. If you want to charge the battery more quickly, put your notebook into Suspend mode, or turn off your notebook, while the adapter is charging the battery. (See Power Off on page 28 for shutdown procedures.) CAUTION There is no guarantee that data will not be lost once your notebook enters the Dead Battery Suspend mode. Cursor Control Left Button Right Button Figure 2-6 Touchpad Pointing Device LifeBo ok 600 Series from Fuji tsu Using Your LifeBook 600 Series