User manual FUJITSU PENCENTRA 200

FMWDS4 Compact Desk Stand User's Instructions PenCentra 130, PenCentra 200, Stylistic LT The Compact Desk Stand is a compact, adjustable device for supporting your PenCentra 130, PenCentra 200, or Stylistic LT pen tablet. The desk stand consists of four primary parts, as illustrated in Figure 1: · · · · Left Leg Assembly Right Leg Assembly Platform Adjustment Cam Platform 0 Adjustment Cam The desk stand is shipped flat and fully assembled in a storage pouch. To open the stand, unfold the leg assemblies so that they resemble Figure 1. The desk stand can now be used on a flat, stable surface, such as a desktop. Using the Desk Stand 0 Left Leg Assembly Right Leg Assembly Figure 1. Compact Desk Stand Place the pen tablet in the desk stand so that the bottom of the tablet is centered in the J-shaped sections of the leg assemblies. The adjustment cam allows you to change the viewing position of the pen tablet screen. To adjust the viewing angle, turn the cam around the shaft on which it is mounted, as shown in Figure 2. Depending on the position of the cam, the vertical position of the screen varies. Experiment with the adjustment cam until you find an acceptable position. When the stand is not in use, fold it flat and store it in the storage pouch. Figure 2. Adjustment Cam PenCentra 130, PenCentra 200, and Stylistic LT are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation 6/00 Page 1 of 1 58-0665-00B