User manual FUJITSU PLASMAVISION PDS5002

USER'S MANUAL 50" WIDE PLASMA DISPLAY PDS5001W/PDS5001U/ PDS5002W/PDS5002U Contents Page Before Use · Safety Precautions ·········································· 2­3 · Features ······························································· 4 · Accessories ·························································· 5 · Handy Tips ··························································· 5 · Installation ··························································· 6 Usage · Part Names and Functions ··························· 7­10 · Using the Remote Control ································ 11 · Connecting the Display to External Equipment ··················································· 12­13 · Basic Operations ··············································· 14 · Selecting Input Mode ········································ 15 · Watching Pictures on the Wide Screen ······ 16­17 · How to Use Menus ······································ 18­23 Page Adjustments · Adjusting Pictures (PICTURE Menu) ·········· 24­25 · Adjusting Screen Position and Size (POSITION/SIZE Menu) ······························· 26­27 · Other Adjustments (FEATURES Menu) ····· 28­35 · Initialization of user adjustment value (FACTORY DEFAULT) ········································ 36 Others · Options ······························································· 37 · Factory Settings ················································· 38 · Specification ······················································ 39 · Cleaning and Maintenance ······························· 40 Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details. DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Ground Floor, Elstree House, Elstree Way, Borehamwood, Herts WD6 1LS Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 50" PLASMA DISPLAY Model Name: PDS5001W to which this declaration relates are in conformity with the following standards; European Standards: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class A b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998 (EN61000-4-2 1995 / EN61000-4-3 1996) (EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996) (EN61000-4-8 1993 / EN61000-4-11 1994) e. EN60065 By conformance with the standard referenced, the product follows the provisions of the directives listed below. a. b. c. d. EC Council Directive 89/336/EEC of 3rd, May 1989 EC Council Directive 92/31/EEC of 28th, April 1992 EC Council Directive 93/68/EEC of 22nd, July 1993 EC Council Directive 73/23/EEC of 19th, February 1973 EMC: Safety: Place of Issue: United Kingdom Date of Issue: Aug. 2001 Signature: H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited Declaration reference: Fujitsu General (U.K) Co. Limited Ground Floor, Elstree House, Elstree Way, Borehamwood, Herts WD6 1LS Tel: 44-208-421-7000 Fax: 44-208-421-7029 DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Ground Floor, Elstree House, Elstree Way, Borehamwood, Herts WD6 1LS Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 50" PLASMA DISPLAY Model Name: PDS5002W to which this declaration relates are in conformity with the following standards; European Standards: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class B b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998 (EN61000-4-2 1995 / EN61000-4-3 1996) (EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996) (EN61000-4-8 1993 / EN61000-4-11 1994) e. EN60065 By conformance with the standard referenced, the product follows the provisions of the directives listed below. a. b. c. d. EC Council Directive 89/336/EEC of 3rd, May 1989 EC Council Directive 92/31/EEC of 28th, April 1992 EC Council Directive 93/68/EEC of 22nd, July 1993 EC Council Directive 73/23/EEC of 19th, February 1973 EMC: Safety: Place of Issue: United Kingdom Date of Issue: Aug. 2001 Signature: H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited Declaration reference: Fujitsu General (U.K) Co. Limited Ground Floor, Elstree House, Elstree Way, Borehamwood, Herts WD6 1LS Tel: 44-208-421-7000 Fax: 44-208-421-7029 SAFETY PRECAUTIONS FCC NOTICE · PDS5001W/PDS5001U: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. · PDS5002W/PDS5002U: A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ ­ ­ ­ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT INFORMATION WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these "Important Safeguards" carefully before use. ­ ­ ­ ­ ­ ­ ­ ­ ­ All the safety and operating instructions should be read before the product is operated. The safety and operating instructions should be retained for future reference. All warnings on the product and in the operating instructions should be adhered to. All operating instructions should be followed. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the product manufacturer as they may cause hazards. Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, electric shock, or other hazards. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. 2 ­ Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer's instructions, and should use a mount recommended by the manufacturer. When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator. ­ ­ Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer's instructions have been adhered to.) For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm. ­ ­ ­ ­ ­ ­ ­ ­ This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply of your home, consult your product dealer or local power company. This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel. Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions: a) When the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen on the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance--this indicates a need for service. ­ ­ ­ ­ ­ ­ When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat. When connecting other products such as VCR's, and personal computers, you should turn off the power of this product for protection against electric shock. Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special hazards when overheated. Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC200­240 V(W type) and AC100­120 V(U type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used with other power supply voltage, the power cable must be changed. Use the standard power plug and cord set of the specified country. Consult your product dealer. Power cord Power supply voltage: AC 100­125 V (W type:Not included) (U type:Included) AC 200­240 V (W type:Included) (U type:Not included) AC 240 V (SAA TYPE) (Not included) 3 FEATURES This display uses a plasma display panel and is only 9.8 cm deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. Variety of input signals · In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as DVD and HDTV. · The display has an RGB input terminal to receive digital RGB signal of DVI standard to display a high definition picture quality in addition to mD-sub terminal and BNC terminal. · Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM, PAL60, N-PAL, M-PAL, 4.43NTSC. · The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital broadcasting signals (color difference signals). · The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA,SXGA and UXGA*1. 5 screen sizes (Video input mode) and 3 screen sizes (RGB input mode) · This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures. · The display has an Auto mode to switch screen size automatically depending on the contents of software. · Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available. Vertical installation · The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen information, such as input modes and menus, is displayed properly. Power management function · The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability. Flexible as part of a system · You can operate the display by remote control using the RS-232C interface. · If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use. · Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation. · Main unit key lock function can prevent mischief and malfunction. Others · Troublesome adjustment of clock phase can be avoided by automatic clock phase adjustment function (Automatic Clock Phase function). · You can specify the color temperature. · The white screen and screen orbiter functions are available to minimize phosphor burn-in. · A clear picture can be obtained by digital noise reduction function. · A display suitable for such film materials as movie pictures can be made by 24 frame mode function. *1 The refresh rate of 60, 72, 75 and 85 Hz for SVGA (800 x 600) and those of 60, 70, 75 Hz for XGA (1024 x 768) and those of 60, 75 Hz for SXGA (1280 x 1024) and those of 60 Hz for UXGA (1600 x 1200) are supported. Note that the SVGA, XGA, SXGA and UXGA pictures will be compressed when displayed on the screen. 4 ACCESSORIES CHECKING ACCESSORIES One remote control Two AA batteries One user's manual One power cable Two ferrite cores Manual (W type) (U type) HANDY TIPS · Pictures may become "burnt" into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. 33-34.) · The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however, that some pixels constantly remain lit or dimmed. · The display has a fan to prevent its internal temperature from rising. · Be careful with the air delivered by the fan. It may be very hot. · Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment. You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly. · Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information. · The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red. Warning If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P. 40, or contact your dealer. · Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.9 m or 6.3 feet) from the screen and to look occasionally away while working. · Have the display inspected and cleaned by your dealer at regular intervals. Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. 5 INSTALLATION To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand and the other unit when installing the display, furthermore wall-mounting unit is recommended to use for installing on the wall . Also, be also sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. To ensure proper heat radiation, provide at least as much space around the display as shown below. * Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C. * Never attempt to tilt the display sideways or backward. * To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners. * The display can be installed with either of its sides facing down. When using the stand Front Upper 10 Side (cm) 4 (cm) 10 Left 10 Right Wall 6 Floor Stand Floor Stand When using the wall-mounting unit (horizontal type) Front (cm) Upper 10 When using the wall-mounting unit (vertical type) Front (cm) Upper 10 Side Side (cm) (cm) Wall mounting unit Wall mounting unit Left 10 10 10 Right Wall Left 10 Right Wall 6 Lower 4 10 Lower 4 * When installing the display vertically, setup vertical installation. (Refer to Installation. See P.35) Note The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it. Reference See P. 37 for more information on options. 6 PART NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Lit (green): Lit (orange): Power OFF (stand-by) Power ON Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. 40 for more information.) 2 Remote control signal receiver Receives signals from the remote control. 3 Power button Turns the power ON or OFF (stand-by). 4 Input mode selector button [MODE] Switches between picture input modes. 5 Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. 6 Menu button [MENU] Displays picture adjustment menus. 7 Adjustment buttons [ / ] The [ / ] buttons can also be used to scroll through the options when a menu is displayed. 8 Adjustment buttons [ / ] The [ / ] buttons can also be used to scroll through options in a menu, or to change values. 9 Enter button [ENTER] Press this button to finalize the selection of a desired option in a menu. Warning If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock. 7 PART NAMES AND FUNCTIONS (Continued) Bottom 1 RGB 2 input terminal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. 2 RGB 1 input terminal (RGB 1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. 3 RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. 12.) 4 RGB 3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input erminals, with 75 . TTL : Used when sending RGB signals from the PC to the RGB 3 terminal ANALOG (75 ): Used when sending analog synchronization signals to the RGB 3 terminal 5+6 RGB 3 input terminal (RGB 3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB)output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. 6 Component video input terminal (COMPONENT VIDEO INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. 7 Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. 8 S-video input terminal (S-VIDEO INPUT) Connect this terminal to the S-video output terminal of your VCR or video disk player. 9 Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable,attach a ferrite core to the cable. (See P.12) 0 OFF/STD-BY OFF STD-BY switch :The power indicator lamp goes off, and the power can't be turned on by the power button. The power is partly supplied. :The power indicator lamp lights red, and the power can be turned on or off by the power button. 8 Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) mD-sub terminal (RGB2 INPUT/mD-sub) Pin No. Input signal 1 2 3 4 5 6 7 8 Red Green Blue -- Ground Ground Ground Ground Pin No. 9 10 11 12 13 14 15 Frame -- Ground -- -- Input signal Horizontal synchronization Vertical synchronization -- Ground RS-232C terminal (RS-232C) Pin No. 1 2 3 4 5 6 7 8 9 Signal DCD (Data Carrier Detect) RD (Received Data) TD (Transmit Data) DTR (Data Terminal ready) GND (Ground) DSR (Data Set Ready) RTS (Request To send) CTS (Clear To Send) RI (Ring Indication) 9 PART NAMES AND FUNCTIONS (Continued) Remote Control 1 Power ON button [POWER ON] (See P 14.) . Turns the power ON. 2 Power OFF button [POWER OFF] Turns the power OFF. 3 RGB input mode selector button [RGB] Switches between RGB input modes. (See P 15.) . (See P 14.) . 1 3 2 5 4 6 8 7 9 4 Video input mode selector button [VIDEO] Switches between video input modes. 5 Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. 6 Menu button [MENU] (See P 15.) . (See P 16­17.) . (See P 18­36.) . = Use this button to display a desired menu for adjusting the picture. 7 Volume adjustment buttons [VOL +/-] Unused. 8 Adjustment buttons [ / / / ] (See P 18­36.) . Use these buttons to scroll through options in a menu and change values. 9 Enter button [ENTER] (See P 18­36.) . Press this button to finalize the selection of a desired menu or option within a menu. 0 Display selector buttons [SHIFT 1­4] (See P 34 .) . When you use two or more displays, you can use these buttons to control up to four displays by assigning a unique number to each display. PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide it outwards while pressing it down. 2 Place two AA batteries in the remote control. Make sure that the batteries are properly oriented. 3 Close the cover until it snaps into place. CAUTION: Be sure to use replacement batteries of the same type as the original ones. When disposing of used batteries, please comply with governmental regulations or environmental public institution's rules that apply in your country/area. Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. 10 USING THE REMOTE CONTROL PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner. EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display's signal receiver when using it. Make sure that there are no obstacles between the remote control and the display's signal receiver. Upper 20° 20° Lower Left 30° 30° Right 5 m (Front) Information The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position. 11 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable's grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Terminal VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT RGB INPUT RS-232C Connector BNC S terminal BNC x 3 mD-sub 15-pin , BNC x 5 , DVI-D D-sub 9-pin Ferrite cores These ferrite cores are used to attenuate undesired signals. Two ferrite cores When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal. Ferrite core Ferrite core 12 VIDEO INPUT S-VIDEO INPUT RS-232C RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT To video output terminal To S-video output terminal To RS-232C To display To display output (digital RGB) (analog RGB) terminal output output terminal terminal To color difference output terminal / To display (analog RGB) output terminal Connection to AV equipment Connection to PC 13 BASIC OPERATIONS TURNING ON THE POWER 1 2 3 * You can also use the switches on the display's control panel to accomplish these steps. Select the OFF/STD-BY at the STD-BY switch of the display. When you do so, the power indicator lamp turns red. Press control. on the remote When you do so, the power indicator lamp turns green. Press or to select a desired input mode. TURNING OFF THE POWER Press when the power is ON. The power indicator lamp turns red. 14 SELECTING INPUT MODE VIDEO INPUT MODE 1 Press mode. to select a desired input Each time you press , a different input mode appears. The sequence is as follows: Video: S-video: Displays pictures from equipment connected to the Video terminal. Displays pictures from equipment connected to the S-video terminal. S-video mode Comp.video: Displays pictures from equipment connected to the component video input terminal. * You can switch between video input modes while you are in RGB input mode. * When Comp.video input terminal is connected, RGB3 mode is not available. Setting is made in BNC Input mode.(See P.31.) Comp.video mode * You can also use the switches on the display's control panel to accomplish these steps. RGB INPUT MODE 1 Press mode. to select a desired input Each time you press , a different input mode appears. The sequence is as follows: RGB1:Displays pictures from equipment connected to the RGB1 (DVI-D) terminal. RGB2:Displays pictures from equipment connected to the RGB2 (mD-sub) terminal. RGB3:Displays pictures from equipment connected to the RGB3 (BNC x5) terminal. * You can switch between RGB input modes while you are in a video input mode. * When RGB3 input terminal is connected, Comp.video mode is not available. Setting is made in BNC Input mode.(See P.31.) RGB1 mode RGB2 mode * You can also use the switches on the display's control panel to accomplish these steps. 15 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 2 Press . The currently selected mode will appear. Press to select a desired picture mode. Each time you press , a different picture mode appears. The sequences used are as follows: When you are in a Video or S-video input mode Normal mode When you are in a Comp.video input mode When you are in an RGB input mode * You can also use the switches on the display's control panel to accomplish these steps. Wide1 mode * Depending on the type of signal, some aspects may not be selected. Note · Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. · A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. · Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the same aspect ratio as the original picture; this enables the director's original intentions to be preserved. Reference See P. 26­27 for how to adjust the picture size and position. 16 SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Picture of standard size Wide1 Wide2/Wide Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs. Vertically extended picture Wide2 Zoom1/Zoom Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant. Horizontally extended picture Zoom1 Zoom2 Reduces the height of horizontally extended pictures with captions, without eliminating the caption. Only the height of pictures is reduced, not the height of the caption. (Captions may not be easy to read, however, depending on the picture.) Horizontally extended picture with caption Zoom2 ASPECT RATIO The following aspect ratios are available. 4:3 aspect ratio (VHF/UHF broadcasting, BS broadcasting) 16:9 aspect ratio (HDTV broadcasting) 1.85:1 aspect ratio (Vista Vision size) 2.35:1 aspect ratio (Cinema Vision size) Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture software. 17 HOW TO USE MENUS SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. 1 2 3 Press . The main menu screen will appear. Press or to switch between sub-menus. or , one of the available menus appears. Ex.: "PICTURE" selected in the main menu screen Each time you press The corresponding menu screen will appear. Press or to select an option for adjustment/setup. A total of four different menus (PICTURE, POSITION/SIZE, FEATURES, FACTORY DEFAULT) are available. You can easily distinguish between these menus as shown below. PICTURE POSITION/SIZE FEATURES FACTORY DEFAULT *Press , , or to make adjustment/setup, and press to store. * Do not change input signals when any of the menus are displayed. USING THE PICTURE MENU When you finish selecting a desired option in the PICTURE menu screen, press At this time, the adjustment/setup screen for that option will appear. You can use or to change the value for the option. Press to store. (See P. 24­25.) . Changes you make will be stored only for the selected mode. PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode) 18 Option (1) Contrast (2) Brightness (3) Color (4) Tint (5) Sharpness (6) Gamma Function Adjusts picture contrast. Adjusts screen brightness. Adjusts color darkness. Adjusts tint. Adjusts picture sharpness. Makes gamma correction. Operation : Higher contrast : Lower contrast : Brighter screen : Darker screen : Darker colors : Lighter colors : More greenish colors : More purplish colors : Sharper pictures : Less sharp pictures Use or for switching. Range -30 to +30 -60 to +60 -60 to +60 -30 to +30 (Video, S-video) -60 to +60 (Comp.video, RGB) -16 to +16 Video, S-video, Comp.video Dynamic1/Dynamic2/ Dynamic3/Dynamic4 RGB Dynamic1/Dynamic2/ Dynamic3/Dynamic4/Static Warm/Standard/Cool/User 0 to 255 for each of Red, Green and Blue Off/Min./Std./Max. (7) Color Temp. (8) User Color Temp. Adjusts color temperature. Can set up when User is selected in Color Temp. Sets up noise reduction. Use or for switching. Press or to select Red, Green or Blue and press or to make adjustment. Use or for switching. (9) Noise Reduction (for Video, S-video, Comp.video) USING THE POSITION/SIZE MENU When you finish selecting a desired option in the POSITION/SIZE menu screen, press When you do so, the adjustment screen for that option appears. Press or to select option and press or to make adjustment. Press to store. (See P. 26­27.) Changes you make will be stored only for the selected mode. *You cannot adjust screen size in RGB1 (DVI-D) mode. . POSITION/SIZE Menu screen "Position" adjustment screen Option (1) Position Horizontal Function Adjusts screen position. Adjusts horizontal position. Operation Range Video, S-video Horizontal: -30 to +30 Vertical Zoom: -15 to +15 Others:-7 to +7 Comp.video: -16 to +16 1080I,720P: -32 to +32 RGB-PC: -150 to + 150 Decoder: -16 to + 16 1080I,720P: -32 to +32 Video, S-video: -7 to +7 Comp.video: -4 to +4 RGB-PC: -25 to +50 Decoder: -4 to +4 : Moves screen to the right. : Moves screen to the left. : Moves screen up. : Moves screen down. Vertical Adjusts vertical position. (2) Size Width Height Adjusts screen size. Adjusts width. Adjusts height. : Increases width. : Reduces width. : Increases height. : Reduces height. 19 HOW TO USE MENUS (Continued) USING THE FEATURES MENUS · FEATURES setup screen has 5 options of Adjustment, Function, On Screen, Input Terminal and Others. · Options with " " on the right When you select an option with " ", press You can use or . The adjustment/setup screen for that option appears.(See P. 28­35.) to store. on this screen to make selections or changes.Press · Options with no " " on the right When you select an option with no " ", press or to make selections or changes. Press to store. (See P. 28­35.) FEATURES Menu FEATURES Menu screen (Comp.video Input Mode) Adjustment Menu screen Function Menu screen On Screen Menu screen Input Terminal Menu screen Others(1/2) Menu screen Adjustment Menu (See P 28-29.) . Option (1) Dot Clock (for RGB2, RGB3) (2) Clock Phase (for RGB2, RGB3) (3) Vertical Sync (for RGB2, RGB3) (4) Clamp Position (for Comp.video, RGB2, RGB3) (5)Auto Calibration (for RGB2, RGB3) Function Adjusts the dot clock. Operation Eliminates blur when the optimum value is selected with or . Eliminates blur when the optimum value is selected with or . Use or to select the optimum value for eliminating flicker. Use or for switching. Range -60 to +60 Adjusts clock phase. Auto/Manual (Can adjust 1 to 32 for Manual) -1 to +1 Corrects vertical synchronization signal. Adjusts clamp pulse phase. Selects the optimum dynamic range of images. -8 to +8 Execute Yes/No Display Auto Calibration screen to execute. and press Select Execute, and select Yes to execute and press Auto Calibration. 20 Function Menu(See P 28,30.) . Option (1) 24 Frame Mode (for Video, S-video, Comp.video) (2) 3D Y/C (for Video(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use Use or or for switching. for switching. Range On (Movie) / Off (Normal) On (3D Y/C circuit) / Off (3-line) On Screen Menu(See P 28,30) . Option (1) OSD Function Selects whether to display information other than menus. Selects language used for menus. Operation Use or for switching. Range On (displayed) / Off (not displayed) English Deutsch (German) Español (Spanish) Français (French) Italiano (Italian) Português (Portuguese) (2) Language Display the "Language" selection screen and use or to select a language. to display menus Press in the selected language. Input Terminal Menu(See P 28,31­32.) . Option (1) Video Input (for Video) (2) S-video Input (for S-video) (3) BNC Input Function Selects video mode. Operation Use or for switching. Range Auto/NTSC/PAL/SECAM/ PAL60/N-PAL/M-PAL/ 4.43NTSC Auto/NTSC/PAL/SECAM/ PAL60/N-PAL/M-PAL/ 4.43NTSC Function Comp.video/RGB-PC/ Decoder Mask Off/5/10/15 (dot) Function RGB-PC/Decoder Mask Off/5/10/15 (dot) Selects video mode. Use or for switching. Selects BNC Input signal. Display BNC Input screen or to select an and press option. Use or for switching. Select Comp.video or Decoder by Function to set up Mask. Display D-SUB Input screen and press or to select an option. Use or for switching. Select Decoder by Function to set up Mask. (4) D-SUB Input Selects D-SUB Input signal. 21 HOW TO USE MENUS (Continued) Others Menu(See P 28,32­35.) . Others Menu screen is divided into the following two screens. Others(1/2) Menu screen Others(2/2) Menu screen Option (1) DPMS (for other than RGB1) Function Specifies time before DPMS starts. Can specify the background color when specifying time. Operation Display DPMS screen and press or to select an option. Use or for switching. Can specify background by setting time to other than Off. Press to store. Display the "Screen Orbiter" adjustment screen and use or to select an option. Use or to switch between available choices for the selected option. Range Time Off (disabled)/1 min./ 15 min./45 min./60 min. Background Black/White Mode/Time Off (disabled) Time (every 1 hr) Mode (every time mode is switched) Moving area Min.(moves in small range) Std.(moves in moderate range) Max. (moves in wide range) Off/RGB2/RGB3/Video/ S-video/Comp.video 0 (no setup) 1/2/3/4 RGB1: Auto/VGA/WVGA/XGA/ WXGA RGB2, RGB3: Auto/VGA/WVGA/480P/ XGA/WXGA/SXGA/ SXGA+ Auto/Manual (2) Screen Orbiter (for RGB) Sets up screen orbiter. (3) Input Priority (4) Monitor No. (5) Direct Setting (for RGB) Specifies input mode of highest priority. Selects display number. Selects input signal. Use Use Use or or or for switching. for switching. for switching. (6) Code Setting (for RGB2, RGB3) Specifies and displays type of input signal directly. Display Code Setting screen or to select an and press option. Select Manual to set up Parameter. Use Use Use or or or for switching. for switching. for switching. (7) White Screen (8) Exhibition Mode (9) Installation Sets up to display white over the entire screen. Sets up Exhibition mode. Sets up whether horizontal or vertical installation. Locks the main unit button. Displays system operation status. On /Off(disabled) On (Exhibition mode)/ Off(disabled) -90 Deg. (counterclockwise)/ Normal/ +90 Deg. (clockwise) On (Key Lock)/ Off(disabled) Display only (10) Key Lock (11) Information Use or for switching. Display the "Information" screen. 22 USING THE FACTORY DEFAULT MENU · Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory settings. (See P 36.) . FACTORY DEFAULT Menu screen Yes/No selection screen Option FACTORY DEFAULT Function Restores the adjustment/ setting made in the MENU to factory settings. Operation Select Execute and Yes, and press to restore factory settings. Range Yes/No 23 ADJUSTING PICTURES (PICTURE MENU) BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)] You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes. 1 2 Press . The main menu screen will appear. Press or to select "PICTURE" . Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE "PICTURE" selected in the main menu screen FEATURES FACTORY DEFAULT The PICTURE Menu screen will appear. 3 * You can also use the switches on the display's control panel to accomplish these steps. Press or to select "Tint" . 4 5 6 Press . "Tint" selected in the PICTURE Menu screen (Video Input Mode) The "Tint" adjustment screen will appear. Press or values. to change tint : More greenish colors : More purplish colors Press to store. "Tint" adjustment screen Press