User manual FUNAI F20LCTEA

ENGLISH LCD TELEVISION Owner's Manual F20LCTE F20LCTE-A (STAND TYPE) IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453 OR VISIT OUR WEB SITE AT http://www.funai.us. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories-Do not place this TV on PORTABLE CART WARNING an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the S3126A manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. -2- EN FIGURE A ENGLISH EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14. Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance-this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. -3- EN PRECAUTIONS The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. LOCATION For safe operation and satisfactory performance of your TV, keep the following in mind when selecting a place for its installation: Place your TV in a room with adequate ventilation. Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. Do not place your TV on soft surfaces, such as rugs or blankets. Leave enough room for air to circulate around the bottom, top and back of the TV set. To prevent fire, never place any type of candle or flames on the top or near the TV set. To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org MAINTENANCE CABINET CLEANING PICTURE SCREEN CLEANING If the liquid crystal display panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning the picture screen, disconnect the power cord. Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces. SUPPLIED ACCESSORIES Remote control unit (NE308UD) Batteries ("AA" x 2) TV INPUT SELECT DISPLAY POWER SLEEP 1 4 7 MENU MUTE VOL 2 5 8 0 3 6 9 +100 CH RETURN CH Owner's Manual (1EMN20182) -4- EN TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . .4 C MAINTENANCE . . . . . . . . . . . . . . . . . . . . .4 CABINET CLEANING . . . . . . . . . . . . . . . . .4 PICTURE SCREEN CLEANING . . . . . . . . .4 C SUPPLIED ACCESSORIES . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . .5 C OPERATING CONTROLS AND FUNCTIONS 6 C PREPARATION FOR USE . . . . . . . . . . . . .8 ANTENNA/CABLE CONNECTIONS . . . . . .8 C SET UP FOR USE . . . . . . . . . . . . . . . . . . .9 LANGUAGE SELECTION . . . . . . . . . . . . . .9 CHANNEL PRESETTING . . . . . . . . . . . . . .9 C OPERATIONS . . . . . . . . . . . . . . . . . . WATCHING A TV PROGRAM . . . . . . . SETTING THE SLEEP TIMER . . . . . . CLOSED CAPTION . . . . . . . . . . . . . . PICTURE ADJUSTMENT . . . . . . . . . . BACK LIGHT SELECTION . . . . . . . . . MTS (Multi-Channel Television Sound) SYSTEM . . . . . . . . . . . . . . . . . . . . . . . V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 .10 .10 .10 .11 .11 ENGLISH . . .11 . . .12 C TROUBLESHOOTING GUIDE . . . . . . . . .14 C SPECIFICATIONS . . . . . . . . . . . . . . . . . .15 C WARRANTY . . . . . . . . . . . . . . . . . . . . . . .16 FEATURES MTS/SAP Tuner 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels. PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control. On-Screen Function Display Full-Function Remote Control Sleep Timer Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV. S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras. Component Input The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. -5EN OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - REAR PANEL 1 2 3 4 5 POWER MENU VOL. CH. SELECT POWER 6 7 1 2 3 4 5 6 7 1. MENU button- Press to display the set up menu on the TV screen. 2. VOL. / buttons- Press to ajust the volume level. Press VOL to determine the setting mode at the set up menu. Press to select or adjust a menu item. 3. CH. / buttons- Press to select desired channels. Press to select or ajust a menu item. 4. SELECT button- Press to select TV or video input mode (VIDEO1 or VIDEO2). 5. POWER button- Press to turn the TV ON and OFF. 6. Infrared Remote Sensor- Receives the signals from the remote control. 7. POWER Light- Appears when the TV is ON. 1. AUDIO L/R input jacks- VIDEO2: Connect to the left/right audio output jacks of a DVD player or set top box. Note: The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. 2. COMPONENT video input jacks- Connect to the component video out jacks of a DVD or set top box. 3. AUDIO L/R input jacks- VIDEO1: Connect to the left/right audio output jacks of a video camera, VCR or video game. 4. VIDEO input jack- Connect to the video output jack of a video camera, VCR or video game. 5. S-VIDEO input jack- Connect to the S-VIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied). Note: The S-VIDEO jack is given priority over the VIDEO jack. 6. ANT(enna). in jack- Connect to an antenna, cable system or satellite system. 7. HEADPHONE jack- Connect headphone (not supplied) for personal listening. Note: Do not connect earphones that have an Lshaped plug. The plug may interfere with the jack. -6- EN ENGLISH - REMOTE CONTROL - 1 2 TV POWER INPUT SELECT DISPLAY SLEEP 7 8 1 2 5 8 0 3 6 9 +100 CH RETURN CH 3 4 7 4 5 6 MENU MUTE VOL 9 10 1. POWER button- Press to turn the TV ON and OFF. 2. INPUT SELECT button- Press to select TV or video input mode (VIDEO1 or VIDEO2). 3. Channel number button- Press to select desired channels. Remember to press "0" before a single digit channel. +100 button- Press to select cable channels higher than 99. 4. MENU button- Press to display the set up menu on the TV screen. 5. MUTE button- Press to turn off the sound (Volume level display changes LIGHT RED from LIGHT BLUE). Press it again or press VOL n or m to restore sound. m 6. VOL n/m buttons- Press to ajust the volume level. Press VOL m to determine the setting mode from the set up menu. Press to select or adjust a menu item. 7. DISPLAY button- Press to display the channel number and TV sound mode on the screen. The channel number will disappear by pressing it again. 8. SLEEP button- Press to set the sleep timer and start it. 9. CH RETURN button- Press to go back to the previously viewed channel. Press it again to return to the present channel. 10. CH / buttons- Press to select desired channels. Press to select or ajust a menu item. [INSTALLING THE BATTERIES] 1 Remove the battery compartment cover on the remote unit by sliding it while slightly twisting. 2 Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. 3 Replace the cover. 4 Push the cover on its top side until it clicks in order to fit the cover completely to the compartment. BATTERY PRECAUTIONS · Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. -7- EN PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS UHF Antenna (Not supplied) VHF Antenna (Not supplied) VHF/UHF Combination Antenna (Not supplied) CATV Box * or Satellite Box (Not supplied) OUT IN RF Cable (Not supplied) VHF/UHF Combiner (Not supplied) OR OR 75-ohm Coaxial Cable OR From Cable System or Satellite Antenna 75-ohm Coaxial Cable From Cable System *Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by pressing INPUT SELECT on the remote control or SELECT on the front panel on the TV. · To use the jacks of AV-IN1 on the TV, select "VIDEO1". · To use the jacks of AV-IN2 on the TV, select "VIDEO2". Note: · When you use the S-VIDEO connection, S-VIDEO jack is given priority over the VIDEO jack. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. -8- EN SET UP FOR USE LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the procedure below. 1 Connect antenna or cable first, then connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press POWER without unplugging the power cord. 2 Press POWER to turn on the TV. 3 Press MENU so that the set up menu appears on the TV screen. - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - CHANNEL SET UP ADD/DELETE CH (TV) AUTO PRESET CH ENGLISH The tuner scans and memorizes all active channels in your area. 4 Press CH or to point to "LANGUAGE". 5 Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS] by using the VOL or . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] The TV distinguishes between standard TV channels and cable (CATV) channels. When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. When there is no signal to ANT in jack, "NO TV SIGNAL" will appear. In this case, please check the antenna connections, then try the auto preset again. When you press CH or after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only. The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try AUTO PRESET CH action again when reception conditions are better. ADD/DELETE FUNCTION 1 Press MENU so that the set up menu appears on the TV screen. 2 Press CH or to point to "CHANNEL SET UP". Then press VOL . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] 6 Press MENU to exit. CHANNEL PRESETTING To preset a channel or to change a preset channel, follow the procedure below. 1 Press POWER to turn on the TV. 2 Press MENU so that the set up menu appears on the TV screen. 3 Press the CH or to point to "CHANNEL SET UP". Then press VOL . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] 3 Press VOL to select "ADD/DELETE CH". - CHANNEL SET UP ADD/DELETE CH (TV) AUTO PRESET CH 4 Press CH or to point to "AUTO PRESET CH". Then press VOL . 4 Use CH or to select the channel you wish to put into memory or to erase from memory. Press VOL to highlight the channel number in LIGHT BLUE if you wish to add the channel into memory. Press VOL to highlight the channel number in LIGHT RED if you wish to erase the channel from memory. 5 Press MENU to exit. -9EN OPERATIONS WATCHING A TV PROGRAM 1 Press POWER to turn on the TV. 2 Select the desired channel with CH or . 3 Adjust the volume to the desired listening level using VOL or . 4 Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".) - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] : Press VOL or . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [CAPTION1] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [CAPTION2] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT2] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT1] TV SOUND [MAIN] BACK LIGHT [BRIGHT] SETTING THE SLEEP TIMER The sleep timer function allows you to have the POWER automatically turn off after a set time period. 1 Press POWER to turn on the TV and press SLEEP on the remote control . CAPTION MODE 1) Closed Caption Characters can be displayed on the TV screen only when the received broadcast signal contains Caption Signals. 2) Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines). Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included, characters will not be displayed. SLEEP 10 MINUTE 2 You may change the sleep time by pressing SLEEP on the remote control repeatedly. The timer can be set up to 90 minutes. Each time SLEEP is pressed the time increases by 10 minutes. (The timer display counts up and sleep timer will be displayed on the screen when you press SLEEP on the remote control). Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost. TEXT MODE 1) Displays the text on the screen by scrolling (max. 7 lines). 2) If the received broadcast signal does not contain caption or text signals, no change will occur. Notes: · When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR's video output channel (CH3 or CH4), your TV may not display the correct caption or text. · Captions and texts may not match the TV voice exactly. · Interference may cause the closed caption system not to function properly. · The caption or text characters will not be displayed while the menu display or functions display is shown. 5 If you see this screen: TO CANCEL THE SLEEP TIMER Press SLEEP repeatedly until "SLEEP 0 MINUTE" is displayed. CLOSED CAPTION This TV can receive Caption and Text. CLOSED CAPTION SELECTION You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program. 1 Press MENU so that the set up menu appears on the TV screen. 2 Press the CH or to point to "CAPTION". 3 Press VOL or to select the mode you wish. 4 When done, press MENU to exit. If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF]. - 10 EN ENGLISH PICTURE ADJUSTMENT 1 Press MENU so that the set up menu appears on the TV screen. 2 Press CH or to point "PICTURE". Then press VOL . : Press CH or . MTS (Multi-Channel Television Sound) SYSTEM You can listen to a TV program in MTS stereo. To show the following status, press DISPLAY on the remote control. Menu Selection Type of broadcast Regular Stereo broadcast MAIN -NoneSTEREO MAIN MONO -NoneMONO MAIN SAP -NoneSTEREO SAP BRIGHTNESS + - CONTRAST + - COLOR + SAP SHARPNESS + - TINT + SAP: Second Audio Program, which means your program, can also be received in a second language or sometimes a radio station. 3 Select the feature you wish to adjust with CH or and adjust it with VOL or . VOL BRIGHTNESS CONTRAST COLOR TINT SHARPNESS to decrease brightness to decrease contrast to pale to purple to soft VOL to increase brightness to increase contrast to brilliant to green to clear TO SELECT STEREO, MONO OR SAP IN STEREO BROADCAST 1 Press MENU so that the set up menu appears on the TV screen. 2 Press the CH or to point to "TV SOUND". 3 Press the VOL or to select your desired stereo mode. ([MAIN], [MONO] or [SAP]) : Press VOL or . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MONO] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [SAP] BACK LIGHT [BRIGHT] Note: In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press MENU and VOL so that "PICTURE" is selected. Press CH or repeatedly until the menu disappears. BACK LIGHT SELECTION 1 Press MENU so that the set up menu appears on the TV screen. 2 Press CH or to point to "BACK LIGHT". 3 Press the VOL or to select the mode you wish. 4 When done, press MENU to exit. : Press VOL or . - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [NORMAL] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [DARK] - 11 - EN OPERATIONS (Continued) V-CHIP SET UP V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen. To block certain ratings, follow the steps below. Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to an unblocked channel, then press MENU. When you select the rating category and set it to TV RATING SET UP [BLOCK], the higher rating will change to 1 Press MENU so that the set up menu appears on [BLOCK] automatically. Also, the lower rating the TV screen. will change to [VIEW] automatically. 2 Press CH or to point to "V-CHIP SET UP". When you set "TV-Y" to [BLOCK] or [VIEW], Then press VOL . then all ratings will change to [BLOCK] or - TV SET UP [VIEW] automatically. PICTURE When you set "TV-MA" to [VIEW], then all CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] ratings will change to [VIEW] automatically. CAPTION [OFF] TV SOUND BACK LIGHT [MAIN] [BRIGHT] 6 Press MENU to exit. 3 Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000. ACCESS CODE MPAA RATING SET UP 1 Press MENU so that the set up menu appears on the TV screen. 2 Press CH or to point to "V-CHIP SET UP". Then press VOL . 3 Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000. ACCESS CODE ____ 4 Press CH or to point to "TV RATING". Then press VOL . - V-CHIP SET UP TV RATING MPAA RATING CHANGE CODE ____ 5 Press the CH or to point to your desired item. Then press VOL to select [BLOCK] or [VIEW]. TV-Y TV-Y7( ) B TV-G TV-PG(DLSV) TV-14 (DLSV) TV-MA( LSV) [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] [BLOCK] 4 Press CH or to point to "MPAA RATING". Then press VOL . - V-CHIP SET UP TV RATING MPAA RATING CHANGE CODE · TV-Y : · TV-Y7: · TV-G : · TV-PG: · TV-14 : · TV-MA: Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested Unsuitable for children under 14 Mature audience only 5 Press CH or to point to your desired item. Then press VOL to select [BLOCK] or [VIEW]. G PG PG-13 R NC-17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] B - 12 - EN ENGLISH ·G : · PG: · PG-13: ·R : · NC-17 : ·X : General Audience Parental Guidance suggested Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only Note: When you select [TV-MA], "D" does not appear on the TV screen. The sub-ratings which set to [BLOCK] appear next to the rating category in the TV RATING menu. [V-CHIP ACCESS CODE] To change access code, follow steps. 1 Press MENU, then press CH or to select VCHIP SET UP. Press VOL to continue. 2 Press the number buttons to enter your old access code. If you have never set up your personal access code, use 0000. ACCESS CODE When you select the rating category and set it to [BLOCK], the higher rating will change to [BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically. When you set "G" to [BLOCK] or [VIEW], then all ratings will change to [BLOCK] or [VIEW] automatically. When you set "X" to [VIEW], then all ratings will change to [VIEW] automatically. ____ 6 Press MENU to exit. 3 Press CH or to select CHANGE CODE. Then press VOL to continue. - V-CHIP SET UP TV RATING MPAA RATING CHANGE CODE V-CHIP SET UP SUB RATINGS When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press VOL , the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and set it to [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn to [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. 4 Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. Your new access code is set. You will return to the "V-CHIP SET UP". NEW CODE ____ ____ When you select [TV-Y7]: Press CH or to select "FV" (Fantasy Violence). Then press VOL to select [BLOCK] or [VIEW]. TV-Y7 B FV [BLOCK] [BLOCK] COMFIRM CODE When you select [TV-PG], [TV-14] or [TV-MA]: Press CH or to select "D" (Suggestive Dialog), "L" (Coarse Language), "S" (Sexual Situation) or "V" (Violence). Then press VOL to select [BLOCK] or [VIEW]. TV-PG D L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] [BLOCK] If the code in the CONFIRM CODE space does not match the code in the NEW CODE space, repeat step 4, making sure you enter the same new code exactly in the CONFIRM CODE space. Notes: If a power failure occurs, the default code, 0000 will be the access code. If you connect the power cord to an AC outlet that is controlled by a wall switch, your personal access code will be erased every time you turn off the power at the wall switch. The default code will return to 0000. [IF YOU FORGET YOUR ACCESS CODE] You should restore the access code to 0000 as your access code, unplug the TV's power cord for 10 seconds, then plug it in again. - 13 - EN TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. Black or Luminous point on Screen Poor Reception on Some Channels QUICK SERVICE CHECK LIST POSSIBLE REMEDY Try a new channel, if OK, then possible station trouble. Is TV plugged in? Power at outlet? Is TV's POWER button on? Is antenna connected to terminal on the back of the set? If outside antenna is being used, check for broken wire. Check for local interference. Turn off with POWER button and then turn it on after about a minute. Adjust COLOR control. Adjust CONTRAST & BRIGHT control. Check batteries in Remote Control. Move the TV away from the nearby appliances which have Magnetism. Turn off using the POWER button, then turn it on again 30 minutes later or so. Temperature around is too low. Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace. It is quality of the LCD Panel. Closed Caption Problem My TV is showing captions that are misspelled. Possible Remedy You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions. Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear. Broadcasters may at times use a time compression process to the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost. The videotape was either an illegal copy or the tape duplicating company accidentally left out the captioning signals during the copying process. You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF]. My TV will not show the text in its entirety or there is a delay of what is being said. My captions are scrambled with white boxes on the TV screen. My program guide listed a TV show as being closed captioned but none of the captions were displayed. My prerecorded videotape does not show any captions. The tape box mentions it being closed captioned. My TV screen shows a black box on certain channels. The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD screen. - 14 EN Different color marks on screen Remote Control Doesn't Work PROBLEM Lines or Streaks in Picture Picture OK, Sound Poor Sound OK, Picture Poor Picture Rolls Vertically No Picture or Sound Ghosts in picture Picture Distorted Bars On Screen Picture Blurred Weak Picture No Color SPECIFICATIONS GENERAL SPECIFICATIONS Television system: NTSC-M TV Standard ENGLISH ELECTRICAL SPECIFICATIONS Sound output: 2W, 4 ohm x 4 Closed Caption System: §15.119/FCC Channel coverage VHF: UHF: CATV: 2 ~ 13 14 ~ 69 2 ~ 13, A ~ W, W+1 ~ W+84, A-5 ~ A-1, 5A 181 channel frequency synthesized tuning system Direct access keyboard, programmable scan and up/down OTHER SPECIFICATIONS Remote control: Digital encoded infrared light system AC120V, 60Hz 58W 20" Operating temperature: 5°C to 40°C (41°F~104°F) Power requirements: Power consumption (Maximum): LCD: Tuning System: Channel access: Dimensions(H x W x D):18-9/16" x 23-5/16" x 8-9/16" (471 mm x 592 mm x 217 mm) Weight: 19.4 lbs. (8.8 kg) [F20LCTE] 17.2 lbs. (7.8 kg) [F20LCTE-A] Terminals Antenna input: VHF/UHF/CATV 75 ohm unbalanced (F-type) S-Video input: Mini DIN 4-pin jack Video input: RCA connector Audio input: RCA connector x 4 Component video input: One pin jack (Y), 1Vpp (75 ohm) Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm) 1/8" Stereo (3.5 mm) Headphone: Stereo Sound System 2 speakers 2 ways AV input · Designs and specifications are subject to change without notice and without our legal obligation. · If there is a discrepancy between languages, the default language will be English. - 15 - EN FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the PARTS: LABOR: date of original retail purchase. Certain parts and LCD image burn-in are not covered under this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest FUNAI Authorized Service Center or general service procedure, please call 1-800605-8453 or write to the following: FUNAI CORPORATION, INC. SERVICE CENTER 19900 Van Ness Avenue, Torrance, CA 90501 Tel :1-800-605-8453 http://www.funai.us Head Office: 100 North Street, Teterboro, NJ 07608 PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS. L0305UF / L0315UR TELEVISOR DE CRISTAL LIQUIDO Manual del Usuario F20LCTE F20LCTE-A (TIPO MARCO INCLINADO) ESPAÑOL Si usted necesita asistencia adicional para la instalacìón u operación después de leer el manual del usuario, por favor llame por la línea pre-pagada al: 1-800-605-8453, o visite nuestro sitio Web en http://www.funai.us. ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O DE SHOCK ELÉCTRICO, NO EXPONGA ESTE ARTEFACTO A LA LLUVIA O LA HUMEDAD. PRECAUCION RIESGO DE SHOCK ELECTRICO NO ABRIR PRECAUCION: PARA REDUCIR EL RIESGO DE SHOCK ELECTRICO, NO QUITE LA CUBIERTA (O LA TAPA POSTERIOR). EL APARATO NO TIENE ADENTRO PIEZAS QUE PUEDAN REPARARSE. DEJE LA REPARACION AL PERSONAL DE SERVICIO CALIFICADO. La nota importante está colocada en la parte trasera del gabinete. ESTE SIMBOLO INDICA QUE EN ESTA UNIDAD HAY VOLTAJE PELIGROSO LO CUAL CONSTITUYE UN RIESGO DE SHOCK ELECTRICO. ESTE SIMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE MANTENIMIENTO Y OPERACION EN LA LITERATURA QUE ACOMPAÑA A ESTE ARTEFACTO. IMPORTANTE PARA SU SEGURIDAD 1. Lea las instrucciones-Lea detenidamente todas las instrucciones de seguridad y operación antes de usar el aparato. 2. Conserve las instrucciones-Conserve las instrucciones de seguridad y operación para consultas futuras. 3. Respete las advertencias-Observe estrictamente todas las advertencias impresas en el aparato y las incluidas en el manual de instrucciones. 4. Siga las instrucciones-Siga todas las instrucciones de operación. 5. Limpieza-Desconecte el TV del tomacorriente mural antes de limpiarlo. No use limpiadores líquidos ni aerosol. Use un paño húmedo para la limpieza del aparato. EXCEPCION: Un producto diseñado para servicio ininterrumpido y que por alguna razón, como ser la posibilidad de pérdida del código de autorización para un convertidor CATV, no debe ser desconectado por el usuario para limpieza u otro propósito, puede no incluir la advertencia en cuanto a desconectar el aparato, en la descripción del procedimiento de limpieza (5). 6. Enchufes-No use enchufes no recomendados por el fabricante del TV, ya que podría ser peligroso. 7. Agua y humedad-No use este TV cerca del agua, por ejemplo, cerca de una bañera o lavamanos, cerca del fregadero de la cocina o lavandería, en un piso mojado, cerca de una piscina, etc. 8. Accesorios-No instale este TV en un carro, soporte, trípode o mesa inestables. El TV podría caerse, causando serias lesiones a un niño o adulto, resultando también severamente dañado. Uselo sólo el un carro, soporte, trípode o mesa recomendados por el fabricante, o vendidos con el TV. Toda instalación del aparato debe hacerse de acuerdo a las instrucciones del fabricante, empleando los accesorios ADVERTENCIA DE CARRETA PORTATIL de instalación recomendados por el mismo. La combinación de aparato y carro deberá ser movida con cuidado. Las detenciones bruscas, la fuerza excesiva y las superficies desparejas S3126A podrán hacer que el aparato y el carro se vuelquen. 9. Ventilación-El gabinete del aparato tiene ranuras y aberturas de ventilación que garantizan el funcionamiento confiable del TV, evitando que se recaliente. Estas aberturas no deberán ser bloqueadas ni cubiertas. Para evitar bloquear las aberturas, nunca sitúe el TV encima de una cama, sofá, alfombra u otra superficie similar. Tampoco instale el TV cerca o encima de un radiador o calefactor. El TV no debe ser instalado en un mueble empotrado, como ser una repisa para libros o bastidor, a menos que se pueda garantizar una ventilación adecuada, o cuando las instrucciones del fabricante así lo especifiquen. 10. Alimentación-Este TV sólo debe ser operado mediante el tipo de fuente de alimentación especificado en la etiqueta indicadora. Si no esté seguro del tipo de fuente de alimentación que tiene en su casa, consulte a su distribuidor o a la compañía de electricidad local. En el caso de TV diseñados para funcionar a pilas o con otras fuentes de alimentación, consulte el manual de instrucciones respectivo. 11. Conexión a tierra o polarización-Este TV está equipado con una clavija polarizada de corriente alterna (una clavija que tiene una espiga m s ancha que la otra). Esta clavija solamente podrá ser insertada en el tomacorriente en una sola dirección. Esta es una medida de seguridad. Si no pudiera insertar completamente la clavija en el tomacorriente, vuelva a intentarlo invirtiendo la clavija. Si aún no fuera posible insertar la clavija, tome contacto con un electricista para que repare su tomacorriente obsoleto. No modifique las características de seguridad de la clavija polarizada. 12. Protección del cable de alimentación-Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad de que sean pisados o aplastados por otros objetos sea mínima. Preste especial atención a las clavijas de los cables, a los receptáculos, y al punto por donde salen del aparato. -2- ES FIGURA A EJEMPLO DE CONEXION A TIERRA DE LA ANTENA SEGUN EL CODIGO NACIONAL ELECTRICO Alambre conductor de la antena Sujetador a tierra Unidad de descarga de la antena (NEC Sección 810-20) ESPAÑOL Equipo de servicio eléctrico Conductores de puesta a tierra (NEC Sección 810-21) Sujetadores a tierra NEC - Código Nacional Eléctrico Sistema del electrodo a tierra del servicio de alimentación (NEC Art.250, PART H) S2898A 13. Conexión a tierra de la antena exterior-Si conecta una antena exterior o sistema de cable al TV, asegúrese de conectar a tierra la antena o el sistema de cable para tener una cierta protección contra alzas repentinas de tensión y cargas de electricidad estática. El Artículo 810 del Código Nacional de Electricidad, ANSI/NFPA, núm. 70, entrega información acerca de la manera correcta de conectar a tierra el mástil y la estructura soportante, tamaño de los conductores de puesta a tierra, ubicación de la unidad de descarga de la antena, conexión a los electrodos de tierra, y requisitos para el electrodo de tierra. (Fig. A) 14. Tormentas eléctricas-Como medida adicional de protección durante tormentas eléctricas, o cuando el grabador de videocassettes permanezca sin uso durante períodos prolongados de tiempo, desconéctelo del tomacorriente mural y desconecte la antena o sistema de cable. Esto evita que el TV resulte dañado por tormentas eléctricas o sobretensiones en la línea de alimentación. 15. Líneas de alimentación-Un antena exterior no debe ser instalada en la cercanía de líneas de alimentación aéreas ni de otros circuitos de potencia para iluminación eléctrica, o donde pueda caerse y hacer contacto con tales líneas o circuitos. Al instalar un sistema de antena exterior, tenga mucho cuidado de no tocar tales líneas o circuitos de alimentación, ya que el contacto con ellos podría ser fatal. 16. Sobrecarga-No sobrecargue los tomacorrientes murales ni los cables de extensión, ya que esto podría causar incendios o descargas eléctricas. 17. Entrada de objetos y líquidos-Nunca introduzca objetos de ningún tipo por las aberturas de este TV, ya que podría tocar peligrosos puntos de alta tensión o piezas de cortocircuito, provocando incendios o descargas eléctricas. Nunca derrame ningún tipo de líquido sobre el TV. 18. Servicio-No intente reparar el TV usted mismo; al abrir o desmontar las cubiertas usted se expondrá a alta tensión y a otros peligros. Solicite todo servicio a personal calificado. 19. Daños que requieran reparación-En los siguientes casos, desconecte el TV del tomacorriente mural y llame a un técnico de servicio calificado: a. Cuando el cable de alimentación o la clavija estén dañados. b. Si se ha derramado líquido sobre la unidad, o si algún objeto ha caído dentro del TV. c. Si el TV ha sido expuesto a la lluvia o al agua. d. Cuando a pesar de haber seguido las instrucciones de operación, el TV no funcione normalmente. Ajuste solamente los controles mencionados en el manual de instrucciones; el ajuste incorrecto de otros controles podrá causar daños a la unidad, la que por lo general requerirá de un prolongado trabajo de reparación (por un técnico calificado) para que sus condiciones normales de operación puedan ser restablecidas. e. Si el TV se ha caído o si el gabinete se ha dañado. f. Cuando el grabador de videocassettes muestre un cambio notorio en su rendimiento. 20. Piezas de repuesto-Cuando sea necesario reemplazar piezas, asegúrese de que el técnico de servicio emplee las piezas de repuesto especificadas por el fabricante, o piezas que tengan las mismas características que las piezas originales. Las sustituciones no autorizadas podrán causar incendios, descargas eléctricas y otros problemas. 21. Revisión de seguridad-Al finalizar cualquier servicio de mantenimiento o reparación de este TV, solicítele al técnico que efectúe comprobaciones de seguridad para determinar si el TV se encuentra o no en condiciones óptimas de operación. 22. Calor-Esto producto TV deben colocarse fuera del alcance de fuentes de calor tales como radiadores, rejillas de calefacción, estufas o cualquier otro aparato destinado a producir calor, incluyendo los amplificadores. -3- ES PRECAUCIONES La pantalla de LCD utilizada en este aparato está hecha de cristal. Por lo tanto, se puede romper si el producto se cae o se le da un golpe. Tenga cuidado de no herirse con trozos de cristal en caso de que se rompa la pantalla de LCD. La pantalla de LCD es un producto de alta tecnología con 921.600 transistores de película fina, que proporcionan excelentes detalles de imagen. De vez en cuando, algunos píxeles no activos pueden aparecer en la pantalla como puntos fijos en azul, verde o rojo. Por favor, recuerde que esto no afecta el funcionamiento de su producto. UBICACION Para un funcionamiento seguro y prestaciones satisfactorias de su TV tenga en cuenta lo siguiente cuando seleccione un lugar para su instalación. PRECAUCIÓN: PARA IMPEDIR DESCARGAS ELÉCTRICAS, INTRODUZCA LA PATILLA ANCHA EN LA RANURA ANCHA E INSERTE A FONDO LA CLAVIJA. Coloque su televisor en un lugar con buena ventilación. Mantenga su aparato de TV alejado de las fuentes de calor directo, tales como los rayos directos del sol o los registros de calefacción. No coloque su TV sobre superficies blandas, como alfombras o frazadas. Deje suficiente espacio para que circule el aire alrededor, debajo y arriba del aparato. Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del televisor. Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras. Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros. ADVERTENCIA DE LA FCC- Este equipo puede generar o utilizar energía de radiofrecuencia. Los cambios o modificaciones del equipo pueden causar serias interferencias si dichos cambios o modificaciones no han sido expresamente aprobados en el manual de instrucciones. El usuario podrá perder la autoridad para operar este equipo si efectúa una modificación o cambio no autorizado. Este producto utiliza soldadura de plomo fina, y lámpara fluorescente que contiene una pequeña cantidad de mercurio. La eliminación de estos materiales podrá estar regulada debido a las consideraciones medioambientales. Para obtener información sobre la eliminación o reciclado, póngase en contacto con las autoridades de su localidad o con Electronic Industries Alliance: www.eia.org MANTENIMIENTO LIMPIEZA DEL GABINETE LIMPIEZA DEL TUBO CATODICO Si fuera necesario limpiar el panel de crystal líquido, frote con un paño de algodón o tela blanda. Antes de limpiarlo, desconecte el cable de alimentación de energía. Limpie el panel frontal y las demás superficies exteriores de la TV con una tela suave sumergida en agua tibia y bien exprimida. Nunca use solventes o alcohol. No rocíe con insecticidas líquidos cerca de la TV. Esos productos químicos pueden causar daños y decoloración en las superficies expuestas. ACCESORIOS INCLUIDOS Unidad de control remoto (NE308UD) Pilas ("AA" x 2) TV INPUT SELECT DISPLAY POWER SLEEP 1 4 7 MENU MUTE VOL 2 5 8 0 3 6 9 +100 CH RETURN CH Manual del usuario (1EMN20182) -4- ES INDICE C IMPORTANTE PARA SU SEGURIDAD . . . .2 C PRECAUCIONES . . . . . . . . . . . . . . . . . . . .4 UBICACION . . . . . . . . . . . . . . . . . . . . . . . .4 C MANTENIMIENTO . . . . . . . . . . . . . . . . . . .4 LIMPIEZA DEL GABINETE . . . . . . . . . . . . .4 LIMPIEZA DEL TUBO CATODICO . . . . . . .4 C ACCESORIOS INCLUIDOS . . . . . . . . . . . .4 C CARACTERÍSTICAS . . . . . . . . . . . . . . . . .5 C CONTROLES DE OPERACIÓN Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .6 C PREPARACIÓN PARA LA UTILIZACIÓN . .8 ANTENNA/CABLE CONNECTIONS . . . . . .8 C AJUSTE PARA SU USO . . . . . . . . . . . . . . .9 SELECCIÓN DE IDIOMA . . . . . . . . . . . . . .9 PREAJUSTE DE CANALES . . . . . . . . . . . .9 C OPERACIONES . . . . . . . . . . . . . . . . . PARA VER UN PROGRAMA DE TV . . AJUSTE DEL TEMPORIZADOR PARA DORMIR . . . . . . . . . . . . . . . . . . . . . . . SUBSTITULOS NARRATIVOS . . . . . . AJUSTE DE IMAGEN . . . . . . . . . . . . . SELECCIÓN DE LUZ DE FONDO . . . SISTEMA MTS (Sonido de Televisión Multicanal) . . . . . . . . . . . . . . . . . . . . . AJUSTE DE V-CHIP . . . . . . . . . . . . . . . . .10 . . .10 . . . . . . . . .10 .10 .11 .11 ESPAÑOL . . .11 . . .12 C GUIA EN CASO DE FALLAS . . . . . . . . . .14 C ESPECIFICACIONES . . . . . . . . . . . . . . . .15 C WARRANTY . . . . . . . . . . . . . . . . . . . . . . .16 CARACTERÍSTICAS Sintonizador MTS/SAP Selección de 181 canales- Todos los canales de VHF/UHF más un máximo de 125 canales de televisión por cable. Sintonización sintetizada de frecuencias PLL- El más reciente sistema electrónico de sintonización sintetizada de frecuencias PLL proporciona una selección libre y sencilla de los canales, y le permite sintonizar directamente cualquier canal utilizando los botones de números de canales (0-9, y el botón +100) del mando a distancia. Visualización de funciones en la pantalla Mando a distancia para todas las funciones Temporizador para dormir Descodificador de subtítulos- Podrá ver programas de TV, películas, noticias, cintas pregrabadas, etc., etiquetados especialmente (cc), bien con subtítulos del diálogo o con visualización del texto añadidos al programa. Función de apagado automático- Si entran señales por el terminal de la antena y el televisor no se utiliza durante 15 minutos, éste se apagará automáticamente. V-CHIP- Permite a los padres impedir que sus hijos vean en el televisor programas no apropiados para ellos. Entrada S-VIDEO- permite ver imágenes más detalladas y claras en la reproducción de cintas de videograbadora S-VHS, videodiscos, sistema satélite, juegos en video o videocámaras. Entrada componente El número de serie de este producto puede encontrarlo en la parte posterior de la unidad. Ninguna otra tiene el mismo número de serie que la suya. Le recomendamos que registre aquí ese número y cualquier otra información vital y conserve este libro como un registro permanente de su compra, para ayudarlo a indentificarla en caso de robo. Fecha de compra Empresa vendedora Direccin de la empresa Telfono de la empresa Modelo No. Serie No. -5ES CONTROLES DE OPERACIÓN Y SUS FUNCIONES - PANEL DELANTERO - PANEL TRASERO 1 2 3 4 5 POWER MENU VOL. CH. SELECT POWER 6 7 1 2 3 4 5 6 7 1. Botón MENU- Púlselo para visualizar el TV prep. menú. 2. Botones VOL. /- Púlselos para controlar el nivel del volumen. Pulse el botón VOL para determinar un modo de ajuste del TV prep. menú. Púlselos para seleccionar o ajustar de un artículo de menú. 3. Botones CH. /- Púlselos para seleccionar un canal memorizado. Púlselos para seleccionar o ajustar de un artículo de menú. 4. Botón SELECT- Púlselo para seleccionar el modo de TV o la entrada de vídeo (VIDEO1 o VIDEO2). 5. Botón POWER- Púlselo para encender y apagar el televisor. 6. Ventanilla sensora de infrarrojos- Recibe las señales de control infrarrojas procedentes del mando a distancia. 7. Luz POWER- Aparece cuando el TV está encendido. 1. Tomas de entrada AUDIO L/R- VIDEO2: Conecte a las tomas de salida de audio izquierda/derecha de un reproductor de DVD o caja encima del aparato. Nota: La toma AUDIO L es para la entrada mono. El sonido se oye por ambos altavoces. Utilice esta toma para el equipo monofónico que se conecte. 2. Tomas de entrada de video COMPONENT- Conecte las tomas de salida de vídeo componente de un reproductor de DVD o caja encima del aparato. 3. Tomas de entrada AUDIO L/R- VIDEO1: Conecte las tomas de salida de audio izquierda/ derecha de una videocámara, videograbadora o videojuegos. 4. Toma de entrada VIDEO- Conecte a la toma de salida de vídeo de una videocámara, videograbadora o videojuegos. 5. Toma de entrada S-VIDEO- Conéctela a la toma de salida S-VIDEO de una videocámara o una videograbadora utilizando el cable SVIDEO (no incluído). Nota: La toma S-VIDEO del panel trasero tiene prioridad sobre la toma VIDEO. 6. Toma de entrada de antena (ANT.)Conéctela a una antena, sistema de TV por cable o sistema de TV por satélite. 7. Toma HEADPHONE- Conecte los cascos auriculares (no incluído) para escuchar en privado. Nota: No conecte audífonos con enchufe en forma de L. El enchufe puede interferir con el mueble. -6ES - CONTROL REMOTO - 1 2 TV POWER INPUT SELECT DISPLAY SLEEP 7 8 1 2 5 8 0 3 6 9 +100 CH RETURN CH 3 4 7 4 5 6 MENU MUTE VOL 9 10 1. Botón POWER- Púlselo para encender y apagar el televisor. 2. Botón INPUT SELECT- Púlselo para seleccionar el modo de TV o la entrada de vídeo (VIDEO1 o VIDEO2). [INSTAlACION DE LAS PILAS] 3. Botones de números de canales- Pulse dos dígitos para acceder directamente al canal deseado. Recuerde pulsar "0" antes de pulsar el número de un canal de un solo dígito. Botón +100- Pulse para seleccionar canales de cable de más de 99. 4. Botón MENU- Púlselo para visualizar el TV prep. menú. 5. Botón MUTE- Púlselo para apagar el sonido. (La visualización del nivel del volumen cambia del color AZUL CLARO a ROJO CLARO.) Pulse de nuevo este botón o los botones VOL n o m para reponer el sonido. 6. Botones VOL n/m- Púlselos para controlar el m nivel del volumen. PPulse el botón VOL m para determinar un modo de ajuste del TV prep. menú. Púlselos para seleccionar o ajustar de un artículo de menú. 7. Botón DISPLAY- Púlselo para visualizar el número del canal en el modo de sonido TV en la pantalla. Si lo pulsa de nuevo, el número del canal desaparecerá. 8. Botón SLEEP- Púlselo para visualizar el temporizador para dormir y activar la función. 9. Botón CH RETURN- Púlselo para volver al canal previamente visto. Púlselo nuevamente para volver al canal actual. 10. Botones CH /- Púlselos para seleccionar un canal memorizado. Púlselos para seleccionar o ajustar de un artículo de menú. ESPAÑOL 1 Quite la tapa del compartimiento de las pilas en la unidad del comtrol remoto deslizandola mientras se torce ligeramente. 2 Inserte 2 pilas pequeñas "AA" en el compartimiento de las pilas, en la posición indicada por las marcas de polaridad (+ / -). Pulse el lado sperior de la tapa hasta chasquea a fin de fijar completamente la tapa en el compartimiento. 3 Instale la tapa. 4 PRECAUCIONES DE PILAS · Respete las indicaciones de polaridad indicadas en el compartimiento de las pilas. Las pilas con sus polaridades mal colocadas pueden dañar el dispositivo. · No mezcla pilas de tipos diferentes (por ejemplo, pilas alcalinas y de carbono-zinc) ni pilas viejas y nuevas. · Si el dispositivo no se va a utilizar durante mucho tiempo, quite las pilas para impedir que sus posibles fugas puedan causar daños o lesiones. · No intente cargar las pilas que no hayan sido diseñadas para ser cargadas porque podría recalentarse y reventar. -7ES PREPARACIÓN PARA LA UTILIZACIÓN ANTENNA/CABLE CONNECTIONS Antena UHF (no incluído) Antena VHF (no incluído) Antena combinada de VHF/UHF (no incluído) Caja de CATV* o caja de emisiones vía satélite (no incluído) Cable de RF (no incluído) Combinador de VHF/UHF (no incluído) o o IN Desde el cable coaxial de 75 ohm o caja de emisiones vía satélite del sistema de cable. Cable coaxial de 75 ohm Desde el sistema de Cable o OUT *Algunos sistemas de TV cable utilizan señales codificadas y requieren un convertidor especial para recibir esos canales. Consulte con su compañía local de Cable. UTILIZACIÓN DE LAS TOMAS DE ENTRADA AUDIO/VIDEO Cuando utilice las tomas de entrada AUDIO/VIDEO, seleccione el modo "VIDEO1" o "VIDEO2" pulsando INPUT SELECT en el mando a distancia o SELECT en el panel frontal del TV. · Para utilizar las tomas de AV-IN1 en el TV, seleccione "VIDEO1". · Para utilizar las tomas de AV-IN2 en el TV, seleccione "VIDEO2". Nota: · Cuando utilice la conexión S-VIDEO, la toma SVIDEO del panel trasero tendrá prioridad sobre la toma VIDEO. Nota para la persona que instale el sistema CATV : Este recordatorio se agrega para llamar la atención de quien instale el sistema CATV, con respecto al Artículo 820-40 de la NEC que provee directivas guía para realizar una conexión adecuada a tierra y en particular, especifica que el cable de puesta a tierra debe ser conectado al sistema de terminal a tierra del edificio lo más cercano al punto de entrada del cable como sea posible. -8- ES AJUSTE PARA SU USO SELECCIÓN DE IDIOMA Si desea cambiar el idioma del menú en pantalla, siga el procedimiento de abajo. 1 Conecte el cable de alimentación a una toma de CA estándar. Nota: Si aparecen algunos dígitos en el rincón de la pantalla, pulse POWER sin desenchufar el cable de alimentación. 2 Pulse POWER para encender el televisor. 3 Pulse MENU para que aparezca TV prep. menú en el televisor. - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - ADJUSTE DE CANAL AGREGAR/BORRAR CA (TV) PREA. AUTO CA.