User manual GARMIN GPSMAP 76CSX

mapping gps with sensors owner's manual GPSMAP 76CSx ® Shown with optional MapSource® data. © 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei Unit 5, The Quadrangle, Abbey Park County, Taiwan Industrial Estate, Romsey, SO51 9DL, U.K. Tel. 886/2.2642.9199 Tel. 44/0870.8501241 Fax 886/2.2642.9099 Fax 44/0870.8501251 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, GPSMAP®, AutoLocate®, TracBack®, BlueChart®, and MapSource® are registered trademarks of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. This product includes technology owned by SiRF Technology, Inc. SiRF's technology is protected by U.S. and foreign patents pending and issued. SiRF, SiRFstar and the SiRF logo are registered trademarks of SiRF Technology, Inc. SiRFstarIII and SiRF Powered are trademarks of SiRF Technology, Inc. December 2005 Part Number 190-00558-00 Rev. B Printed in Taiwan INTRODUCTION > ABOUT THIS MANUAL INTRODUCTION Thank you for choosing the Garmin GPSMAP 76CSx. The GPSMAP 76CSx uses the proven performance of Garmin GPS and full-featured mapping to create an unsurpassed portable GPS receiver. Take a moment now to compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately. The Main Pages section contains an overview of the Satellite, Trip Computer, Map, Compass, and Altimeter Pages. The Main Menu section describes features found in the Main Menu, and information on how to change settings. The Appendix contains information such as specifications, optional accessories, and maintenance information. You can also find warranty and FCC information in the Appendix. An Index is provided at the end of the manual for reference. About This Manual To get the most out of your new navigation system, take time to read this manual and learn the operating procedures for your unit in detail. This manual is organized into the following sections. The Introduction contains the Table of Contents. The Getting Started section provides an overview of the unit, how to turn the unit on, and how to acquire satellites. The Basic Operation section provides information about setting up waypoints, routes, and tracks. GPSMAP 76CSx Owner's Manual Manual Conventions This manual uses the term Warning to indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. This manual uses the term Caution to indicate a potentially hazardous situation, which, if not avoided, may result in minor injury or property damage. It may also be used without the symbol to alert you to avoid unsafe practices. i INTRODUCTION > TABLE OF CONTENTS TABLE OF CONTENTS Introduction.......................................................i About This Manual ..............................................i Manual Conventions ................................................ i Software License Agreement ............................v Product Registration ..........................................v Contact Garmin....................................................... v Caring for the GPSMAP 76CSx ........................vi Cleaning the Case ................................................. vi Cleaning the Screen ............................................... vi Storage ................................................................... vi Water Immersion ................................................... vi Warning .............................................................vii Caution .............................................................viii Unit Overview .....................................................1 Using the GPSMAP 76CSx Keypad ..................3 Turning on the GPSMAP 76CSx ........................4 Adjusting the Backlight .......................................... 4 Initializing the GPS Receiver .............................5 Initialization Options .............................................. 6 Using the GPSMAP 76CSx ................................6 Understanding Terms .............................................. 6 Selecting Options and Entering Data...................... 7 Using the Status Bar ............................................... 8 On-Screen Messages............................................... 9 Using the Databases................................................ 9 Basic Operation .............................................10 Getting Started.................................................1 Creating and Using Waypoints .......................10 Marking Your Current Location ........................... 10 Creating Waypoints Using the Map ...................... 11 Creating a Waypoint Using Coordinates .............. 11 Editing Waypoints ................................................ 12 Deleting Waypoints .............................................. 12 Averaging the Waypoint's Location ..................... 13 Projecting a Waypoint........................................... 14 Proximity Waypoints ............................................ 15 Man OverBoard (MOB) ....................................... 16 Using the Find Menu ........................................16 Find By Name ....................................................... 17 Recent Finds ......................................................... 18 Using the Find Information Page.......................... 18 Find Information Page Options Menu .................. 18 Finding a Waypoint............................................... 20 ii GPSMAP 76CSx Owner's Manual INTRODUCTION > TABLE OF CONTENTS Finding a Geocache .............................................. 21 Finding a City ....................................................... 21 Finding an Interstate Exit ..................................... 22 Finding an Intersection ......................................... 24 Searching for a Point of Interest ........................... 24 Using Tracks .....................................................26 Track Profiles ........................................................ 29 Navigating a Saved Track ..................................... 30 Creating and Using Routes .............................31 Creating a Route ................................................... 31 Navigating a Route ............................................... 32 Editing a Route ..................................................... 33 Using the Route Page Options .............................. 35 Measuring Distance .............................................. 45 Turning Declutter On or Off ................................. 46 Restoring Defaults ................................................ 47 Compass Page..................................................47 Using the Electronic Compass .............................. 48 Compass Page Options ......................................... 50 Sight `N Go Navigation ........................................ 51 Using the Course Pointer or Bearing Pointer ....... 52 Data Fields ............................................................ 53 Altimeter Page ..................................................54 Altimeter Page Options ........................................ 55 Plot Over Time (Distance) .................................... 56 View Pressure/Elevation Plots ............................. 56 Zoom Ranges ........................................................ 57 View Points ........................................................... 58 View Points on Map ............................................. 58 Reset ..................................................................... 59 Calibrate Altimeter ............................................... 60 Change Data Fields ............................................... 61 Trip Computer Page .........................................61 Trip Computer Page Options Menu ...................... 62 Main Pages .....................................................36 Satellite Page ....................................................37 Using the Satellite Page Options Menu ................ 37 Map Page...........................................................38 Using Additional Map Data .................................. 39 Changing the Zoom Range ................................... 40 Map Orientation .................................................... 40 Map Page Options ................................................ 40 Guidance Text ....................................................... 41 Setting up the Map Page ....................................... 42 GPSMAP 76CSx Owner's Manual iii INTRODUCTION > TABLE OF CONTENTS Main Menu ......................................................63 Tracks ................................................................63 Track Page Options............................................... 64 Route Page........................................................64 Highway Page ...................................................64 Setup Menu .......................................................65 System Setup ........................................................ 66 Display Setup ........................................................ 67 Interface Setup ...................................................... 68 Tones Setup........................................................... 68 Page Sequence Setup ............................................ 69 Map Page Setup .................................................... 69 Routing Setup ....................................................... 70 Geocache Setup .................................................... 71 Marine Setup......................................................... 72 Time Setup ............................................................ 73 Units Setup ........................................................... 73 Heading Setup....................................................... 74 Calibration Setup .................................................. 75 Altimeter Setup ..................................................... 76 Welcome Setup ..................................................... 77 Jumpmaster ........................................................... 78 Proximity Waypoints ........................................82 Calendar ............................................................82 Calculator ..........................................................83 Stopwatch .........................................................84 Sun and Moon...................................................85 Hunt and Fish ...................................................86 Games Menu .....................................................87 Appendix ........................................................91 Specifications ...................................................91 Interfacing .........................................................92 Optional Accessories .......................................93 Connecting Your GPSMAP 76CSx to a Computer .............................................................94 Map Datums and Location Formats ...............95 What is WAAS/EGNOS?...................................97 Data Field Definitions.......................................98 FCC Compliance.............................................101 Limited Warranty ............................................102 Index .............................................................104 iv GPSMAP 76CSx Owner's Manual INTRODUCTION > SOFTWARE LICENSE AGREEMENT AND PRODUCT REGISTRATION Software License Agreement BY USING THE GPSMAP 76CSx, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America. Product Registration Help us better support you by completing our online registration today! Have the serial number on the back of your GPSMAP 76CSx handy and connect to our Web site (http://www.garmin.com). Look for the Product Registration link on our Home page. Use this area to record the serial number of your GPSMAP 76CSx. Be sure to keep your original sales receipt in a safe place or attach a photocopy inside the manual. Serial Number: ___ ___ ___ ___ ___ ___ ___ ___ If you should encounter any difficulty while using your GPSMAP 76CSx, or if you have any questions, in the U.S.A. contact Garmin Product Support by phone: 913/397.8200 or 800/800.1020, Monday­ Friday, 8 AM­5 PM Central Time; or by e-mail at www.garmin.com/contactUs. In Europe, contact Garmin (Europe) Ltd. at 44/0870.8501241. Contact Garmin GPSMAP 76CSx Owner's Manual v INTRODUCTION > CARING FOR THE GPSMAP 76CSX Caring for the GPSMAP 76CSx The GPSMAP 76CSx case is constructed of high quality materials and does not require user maintenance except cleaning. Storage Cleaning the Case Clean the unit's outer casing (except for the screen) using a cloth dampened with a mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic components. Do not store the GPSMAP 76CSx where prolonged exposure to temperature extremes may occur (such as in the trunk of a car) as permanent damage may result. User information, such as waypoints and routes are retained in the unit's memory without the need for external power. It is always a good practice to back up important user data by manually recording it or downloading it to a PC (transferring it to MapSource). Cleaning the Screen Water Immersion The GPSMAP 76CSx screen should be cleaned using a soft, clean, lint-free cloth. Water, isopropyl alcohol, or eyeglass cleaner can be used if needed. If these are used, apply the liquid to the cloth and then gently wipe the screen with the moistened cloth. The GPSMAP 76CSx is waterproof to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to the unit. After submersion, be certain to wipe and air dry the unit and replace batteries before reuse. vi GPSMAP 76CSx Owner's Manual INTRODUCTION > WARNING Warning Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. When navigating, carefully compare information displayed on the GPSMAP 76CSx to all available navigation sources, including information from visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Use the electronic chart in the GPSMAP 76CSx only to facilitate, not to replace, the use of authorized government charts. Official government charts and notices to mariners contain all information needed to navigate safely. WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California's Proposition 65. If you have any questions or would like additional information, please refer to our Web site at http://www.garmin.com/prop65. GPSMAP 76CSx Owner's Manual vii INTRODUCTION > CAUTION Caution Failure to avoid the following potentially hazardous situations may result in injury or property damage. Use the GPSMAP 76CSx only as a navigational aid. Do not attempt to use the GPSMAP 76CSx for any purpose requiring precise measurement of direction, distance, location, or topography. This product should not be used to determine ground proximity for aircraft navigation. The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government's system is subject to changes which could affect the accuracy and performance of all GPS equipment, including the GPSMAP 76CSx. Although the GPSMAP 76CSx is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe. Map Data Information: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some extent. In some countries, complete and accurate map information is either not available or is prohibitively expensive. viii GPSMAP 76CSx Owner's Manual GETTING STARTED > UNIT OVERVIEW GETTING STARTED Unit Overview Internal antenna Auxiliary GPS Antenna Connector (under weather cap) Battery compartment cover Battery compartment locking D-ring Interface keys External Data/Auxilary Power Port (under weather cap) USB connector port (under weather cap) Carry Lanyard attachment slots GPSMAP 76CSx Owner's Manual 1 GETTING STARTED > UNIT OVERVIEW Installing the Batteries, MicroSD Card, and Lanyard The GPSMAP 76CSx operates on two AA batteries (not included), which are located in the back of the unit. You can use Alkaline or NiMH batteries. See page 66 for information on setting the battery type. To install the batteries: 1. Remove the battery cover by turning the D-Ring 1/4 turn counter-clockwise and pulling the cover loose. 2. Insert the batteries, observing the proper polarity. A polarity diagram is molded into the battery compartment. 3. Reinstall the battery cover by aligning the back cover with the unit and turning the D-Ring 1/4 turn clockwise. Remove the batteries from your GPSMAP 76CSx when you do not expect to use the unit for several months. Stored data is not lost when batteries are removed. 1. Remove the battery cover by turning the DRing 1/4 turn counter-clockwise and pulling the cover loose. 2. Press down on the top edge of the MicroSD card until you hear a click. Gently release the card. 3. Press down again to install the card. 1. Place the loop of the Lanyard through the slot at the bottom of the unit. 2 Route the strap through the loop and pull tight. To install and uninstall the MicroSD card: MICRO SD CARD To install the Lanyard: 2 GPSMAP 76CSx Owner's Manual GETTING STARTED > USING THE GPSMAP 76CSX KEYPAD Using the GPSMAP 76CSx Keypad IN/OUT Zoom Keys · Press to zoom in or out on the Map Page. · Press to scroll up or down a list on any other page. FIND/MOB Key · Press at any time to view the Find Menu. · Press and hold for MOB. POWER Key · Press and hold to turn the unit on or off. · Press and Release to adjust the backlighting. QUIT Key · Press to cancel data entry or exit a page. GPSMAP 76CSx Owner's Manual ROCKER Key · Press up, down, left, or right to highlight options and to enter data, or move the map panning arrow. PAGE Key · Press to cycle through the main pages. · Press and hold to turn the compass on or off MENU Key · Press to view page options. · Press twice to view the Main Menu. ENTER/MARK Key · Press and release to enter highlighted options, data or confirm on-screen messages. · Press and hold at any time to mark your current location as a waypoint. 3 GETTING STARTED > TURNING ON THE GPSMAP 76CSX Turning on the GPSMAP 76CSx When the GPSMAP 76CSx is turned on, the Introduction Page appears, followed by the Satellite Page. The unit must collect satellite data and establish its current location. To turn the GPSMAP 76CSx on and off: 1. Press and hold the POWER key. When the unit turns on, a tone sounds and the Introduction Page appears, followed by the Satellite Page. Adjusting the Backlight You might want to adjust the backlight to see the screen better. 1. Press and quickly release the POWER key. 2. Press up on the ROCKER to increase the brightness, or press down to decrease. 3. Press ENTER or QUIT to close the Backlight adjustment window. To adjust the backlight level: Backlight Adjustment Slider Introduction Page Satellite Page See page 67 for information on changing the screen colors and backlight timeout and brightness levels. 2. To turn off the GPSMAP 76CSx, press and hold the POWER key again. 4 GPSMAP 76CSx Owner's Manual GETTING STARTED > INITIALIZING THE GPS RECEIVER Initializing the GPS Receiver The first time you turn on your GPSMAP 76CSx, the GPS receiver must collect satellite data and establish its current location. To ensure proper initialization, the GPSMAP 76CSx is shipped from the factory in AutoLocate mode, which allows the receiver to "find itself" anywhere in the world. To receive satellite signals, you should be outdoors and have a clear view of the sky. 1. Press and hold the POWER key to turn on the GPSMAP 76CSx. 2. Hold the unit in front of you with the top tilted upward. When the receiver has signals from at least three satellites, the top of the page changes to indicate position accuracy and location coordinates. 3. Press and release the PAGE key until the Map Page appears. You are now ready to begin GPS-aided navigation. You can also see a sky view of the satellites overhead with your location centered. The outer circle represents the horizon and the inner circle a location 45 degrees from the horizon. The numbers shown indicate the number assigned to each satellite. The bars at the bottom of the page indicates the strength of satellite signal. The outer circle represents the horizon. The inner circle is 45 degrees from the horizon. To initialize your GPSMAP 76CSx: Heading bug indicates your direction of movement. The Strength of each satellite signal. GPSMAP 76CSx Owner's Manual 5 GETTING STARTED > USING THE GPSMAP 76CSX Initialization Options If the unit cannot get a satellite fix, an options menu with a list of solutions appears. Highlight the appropriate solution and press ENTER. Using the GPSMAP 76CSx Understanding Terms This section explains how to enter and select information with the GPSMAP 76CSx. As you progress through this owner's manual, you are directed to press a specific key or highlight a field on the screen. When you are directed to press a key, you should press and quickly release the key. If the key needs to be held down for a period of time to start a secondary function, the instructions will tell you to do so. When a field is highlighted on the screen, it is highlighted in yellow. The position of the highlight is controlled by the ROCKER. The following terms are used throughout this manual: Highlight--move the highlighted area on the screen up, down, left, or right with the ROCKER to select individual fields. Field--the location where data or an option can be shown and entered. Select (highlight) a field using the ROCKER to begin entering data or selecting options. GPSMAP 76CSx Owner's Manual Use With GPS Off--use this option to save battery power when you do not need the GPS on. New Location--use when you have moved the unit more than 600 miles and you are having trouble locking onto satellite signals. Restart Search--use when you have not moved, but are having trouble locking onto satellite signals. Continue Acquiring--use when you are in an area where the satellite signals are temporarily blocked. 6 GETTING STARTED > USING THE GPSMAP 76CSX On-screen button--use the ROCKER to highlight a button, and press ENTER to select the button. Scroll bar--when viewing a list of items too long to appear on the screen, a scroll bar appears along the right side of the list. To scroll through a list, press up or down on the ROCKER. Default--the factory setting saved in the unit's memory. You can change the settings, but you can also revert to the factory (default) settings when you select Restore Defaults. Selecting Options and Entering Data Use the ROCKER to highlight, select, or choose an item in a list or a field on the screen. 1. From any page, press MENU. An Options Menu appears with a list of additional options for that page. 2. Use the ROCKER to move the highlight up, down, right, or left on the menu to highlight the option you want, and press ENTER to select it. To select and activate an option: To exit a menu or return to the previous setting: Press QUIT. The QUIT key moves backward through your steps. Press QUIT repeatedly to return to the starting page. Field Highlighted field On-screen buttons GPSMAP 76CSx Owner's Manual 7 GETTING STARTED > USING THE GPSMAP 76CSX Using the Status Bar At the top of each page, the status bar provides status information for several unit features. Status Bar · The Battery Power icon ( ) shows the remaining power as the battery. The Auxiliary Power icon ( ) appears when the unit is plugged in to an external or USB power source. · Satellite signal status is shown when searching ), when a 2D fix for or acquiring satellites ( ( ) is attained and when a 3D fix ( ) is attained (four or more satellites are received.) · The Backlight icon ( ) appears when the backlight is on. The Backlight is off when you turn the unit on. The Backlight uses a significant amount of battery power. ) · The USB Cable Connection icon ( appears when the unit is in communication with a PC USB. · Electronic compass icon ( ) appears when the electronic compass is turned on. 8 GPSMAP 76CSx Owner's Manual GETTING STARTED > USING THE GPSMAP 76CSX When a significant event in the operation of the unit occurs, an on-screen message appears to advise you of the occurrence. In each case the condition is described and often a remedy provided. Press ENTER to acknowledge the message and close the window. On-Screen Messages Using the Databases Optional MapSource CD-ROMs enhance the versatility of your GPSMAP 76CSx. This data is loaded to the MicroSD Card already installed in the unit. With optional MapSource City Navigator data, you can view listings of nearby restaurants, lodging, shopping centers, attractions and entertainment, and even retrieve addresses and phone numbers for any listed location. The included USB Interface Cable or an optional PC interface cable (with a serial connector) is used to transfer MapSource CD-ROM data to the MicroSD card. Mad data transfer requires the USB Interface Cable provided with the unit to transfer MapSource data from a PC to the MicroSD card when installed in the GPSMAP 76CSx. Inserting the MicroSD card in a standard SD card adapter and using a card reader allows for faster data transfer time. See the Garmin Web site (http://www.garmin.com/ cartography/) for compatible MapSource products. On-Screen Messages GPSMAP 76CSx Owner's Manual 9 BASIC OPERATION > CREATING AND USING WAYPOINTS BASIC OPERATION This section explains some of the more common operations you will perform with your GPSMAP 76CSx including creating and using waypoints, tracks, and routes using the Find Menu. 1. Press and hold the ENTER/MARK key until the Mark Waypoint Page appears. A default three-digit name and symbol are assigned to the new waypoint. Waypoint symbol Waypoint name To mark your current location: Creating and Using Waypoints Waypoints are locations or landmarks you record and store in your GPS. They are locations you might want to return to later. You can add waypoints to routes and even create a Go To directly to the selected waypoint. Waypoints can be created using three methods. You can press the ENTER/MARK key while at a location, create a waypoint on the Map Page, or enter coordinates for a waypoint manually. Use the ENTER/MARK key to quickly capture your current location to create a new waypoint. You must have a valid position (2D or 3D) fix to mark your current location. 10 Mark Waypoint Page Marking Your Current Location 2. To accept the waypoint with the default information, highlight OK, and press ENTER. To change any information on the Mark Waypoint Page, highlight the appropriate field, and press ENTER to open the on-screen keypad. After entering and confirming your changes, highlight OK, and press ENTER. GPSMAP 76CSx Owner's Manual BASIC OPERATION > CREATING AND USING WAYPOINTS Creating Waypoints Using the Map You can quickly create a waypoint using the Map Page. When you pan the map and move the pointer over a map item, you will see a highlighted description of the item. 1. On the Map Page, use the ROCKER to move the pointer to the map item you want to mark as a waypoint. 2. Press and quickly release ENTER/MARK to capture the pointer location and open the information page for the map item. 3. Highlight Save, and press ENTER. If the selected map item contains no information, a "No map information at this point. Do you want to create a user waypoint here?" message appears. Highlight Yes, and press ENTER. 4. To change any information on the Waypoint Page, highlight the appropriate field, and press ENTER to open the on-screen keypad. After entering and confirming your changes, highlight OK, and press ENTER. GPSMAP 76CSx Owner's Manual To create a waypoint using the Map Page: Information page for a Information page for a map point with data map point without data Creating a Waypoint Using Coordinates You can manually enter location coordinates to create a waypoint. This method is useful for creating a waypoint at a specific latitude/longitude position when using a chart. To create a new waypoint by entering location coordinates: 1. Create a new waypoint. 2. On the Waypoint Page, highlight the Location field, and press ENTER to open the on-screen keypad. 11 BASIC OPERATION > CREATING AND USING WAYPOINTS 3. Use the ROCKER to enter location coordinates. Highlight OK, and press ENTER when finished. 3. Select the waypoint you want to edit, and press ENTER. The Waypoint Page opens. 4. Make changes by highlighting each field and use the waypoint symbol chart, and alphanumeric keypad to enter new data. 5. Press QUIT when finished. Manually enter waypoint coordinates Deleting Waypoints You can delete waypoints from the Waypoint Page. NOTE: When you delete a waypoint, you cannot recover it from the unit. 1. Press FIND to open the Find Menu. 2. Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 3. Select the waypoint you want to delete, and press ENTER. The Waypoint Page opens. 4. Highlight the Delete button, and press ENTER. A confirmation message appears. 5. Highlight Yes, and press ENTER to delete the waypoint. GPSMAP 76CSx Owner's Manual 4. Press QUIT to exit. To delete a waypoint: Editing Waypoints You can edit waypoints when created or at a later date. You can change the symbol, name, note, location, elevation, and depth. 1. Press FIND to open the Find Menu. 2. Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 12 To edit a waypoint: BASIC OPERATION > CREATING AND USING WAYPOINTS 1. On the Find Menu, Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 2. Select the waypoint you want to move, and press ENTER. The Waypoint Page opens. 3. Highlight the Map button, and press ENTER to show the waypoint on the map. 4. Press ENTER again to place a MOVE marker next to the waypoint. 5. Use the ROCKER to move the waypoint to a new location on the map, and press ENTER. To move a waypoint on the Map Page: Averaging the Waypoint's Location You can average a new waypoint location over time to produce a more accurate location. NOTE: You must have a GPS Satellite fix before you can average a waypoint's location. 1. Press FIND to open the Find Menu. 2. Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 3. Select the waypoint for which you want to calculate the average location, and press ENTER. 4. Press MENU to open Options Menu 5. Highlight Average Location, and press ENTER to open the Average Location Page. The unit begins calculating the average location of the waypoint. To calculate the average location: Original location New location Moving a waypoint GPSMAP 76CSx Owner's Manual 13 BASIC OPERATION > CREATING AND USING WAYPOINTS 5. Select Project Waypoint, and press ENTER to open the Project Waypoint Page. 6. Enter the distance and bearing to the projected waypoint in the appropriate fields at the bottom of the page, and press QUIT when finished. Waypoint Options menu 6. Press ENTER to save the location. Projecting a Waypoint You can create a new waypoint by projecting the distance and bearing from a specific location to a new location. 1. Press FIND to open the Find Menu. 2. Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 3. Select the waypoint you want to project, and press ENTER. The Waypoint Page opens. 4. Press MENU to open the Options menu. 14 To project a waypoint: Enter bearing and distance Project Waypoint Projected Page waypoint on the map GPSMAP 76CSx Owner's Manual BASIC OPERATION > CREATING AND USING WAYPOINTS Proximity Waypoints Use the Proximity Waypoints Page to define an alarm circle around a waypoint. Radius field Empty line Proximity icon 4. Select a waypoint from the Waypoints List or from any other group of map points, and press ENTER to open the information page for the item. 5. With the Use button highlighted, press ENTER to add the point to the list on the Proximity Waypoints Page. 6. Use the ROCKER to highlight the Radius field if you want to enter a value different than the default of 1 mile. 1. Press MENU twice to open the Main Menu. 2. Highlight the Proximity icon and press ENTER to open the Proximity Waypoints Page. 3. Highlight the Proximity Alarms check box, and press ENTER to initiate the alarm feature. As you approach a proximity waypoint, a tone sounds and a "Near Proximity Point" message appears. When you move outside the set radius, a "Leaving Proximity Point" message is shown. Proximity Alarms check box To turn proximity alarms on or off: 1. Press MENU twice to open the Main Menu. 2. Highlight the Proximity icon, and press ENTER to open the Proximity Waypoints Page. 3. Highlight an empty line, and press ENTER to open the Find Menu. To add a proximity waypoint GPSMAP 76CSx Owner's Manual 15 BASIC OPERATION > USING THE FIND MENU To clear one or all proximity waypoints from the list: Using the Find Menu To remove or review a single entry, press ENTER. Or To remove all waypoints from the list, press MENU, highlight Remove All, and press ENTER. Use the Find Menu to search for waypoints, cities, and exits included in the GPSMAP 76CSx basemap. You can also find saved waypoint and geocache points. Additional icons appear depending on the optional BlueChart or MapSource data loaded to the unit. Press FIND to open the Find Menu. Man OverBoard (MOB) Another method for creating a waypoint is the Man Overboard (MOB) feature. Typically an application for marking a location on water where you cannot stop quickly and must return to a point where there are no landmarks for reference. To create a waypoint using the MOB feature: Waypoint Options Menu 1. Press and hold the FIND/MOB key to mark the MOB waypoint. 2. Press ENTER to open the Map Page showing the path from your current location to the MOB point. Use the Compass Page for additional guidance to the MOB point. 16 Find Menu with optional MapSource data Cities Options Menu When you access a Find list, it contains only those items near your current location or the pointer (if active). GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING THE FIND MENU The options menu for each category contains a submenu of search options such as Find By Name, Find Nearest, Select Symbol (for waypoints), Change Reference (by moving the pointer to a new location), Nearest Containing (a keyword you enter), Select Category (for those groups such as Food & Drink, and Lodging). Use these options to shorten your search. 4. Use the ROCKER and ENTER keys to operate the on-screen keypad and enter the name of the location you want to find. When the Find list contains a match, highlight OK and press ENTER. Find By Name If you know the name of the location you want to find, use the Find By Name option. 1. Press FIND to open the Find Menu. 2. Use the ROCKER to highlight the icon for the type of item for which you want to search, and press ENTER. Or To search the entire database, select the All Points of Interest icon, and press ENTER. 3. Press MENU, highlight Find By Name, and press ENTER. To find a location using Find By Name: Find By Name On-screen keypad 5. Highlight the location in the Find list, and press ENTER. The item's information page opens, allowing you to save the item as a waypoint, show the item on the map, or automatically create a route (Go To) the item. GPSMAP 76CSx Owner's Manual 17 BASIC OPERATION > USING THE FIND MENU Recent Finds The Recent Finds Page shows a list of the last 50 items you have searched for or gone to recently. 1. Press FIND to open the Find Menu. 2. Press FIND again or highlight the Recent Finds icon and press ENTER to open the Recent Finds Page. Using the Find Information Page To go to a recently found item: When you select an item from the Find List and press ENTER, an information page shows detailed information about the item. Each information page contains three on-screen buttons. Different buttons appear depending on whether you are selecting an item to navigate to or adding an item. Find Information Page Options Menu The Options Menu for each information page contains options for using a Find item as a tool for navigation. Recent Finds icon List of recently found items 1. With an information page open for a Find item, press MENU to open the Options Menu. 2. Use the ROCKER to select an option, and press ENTER: To use the Options Menu: 3. Use the ROCKER to select the item you want to go to, and press ENTER to open the item's information page. 4. Highlight Go To, and press ENTER to begin navigation. 18 Average Location--samples a waypoint location over time and averages the result for a more accurate location reference. See page 13 for more information. Project Waypoint--create a new waypoint by entering bearing and distance from a reference location. See page 14 for more information. GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING THE FIND MENU Find Near Here--returns you to the Find Menu where you can search for map items near the item defined on the information page. Change Reference--point to a new location on the Map Page using the pointer. Set Proximity--program an alarm to sound when you are within a specified radius of an item. See page 15 for more information. Add To Route--include this item on a new route or add it to an existing route. See "Creating and Using Routes" on page 31 for more information. View Sun and Moon--view Sun and Moon tables for this item location. See page 85 for more information. View Hunt and Fish--view Hunt and Fish tables for this item location. See page 86 for more information. Map Information--show the map from which the map item originated. See the Appendix for information about downloading detailed maps. 1. Press FIND to open the Find Menu. 2. Select an icon on the Find Menu, and press ENTER. 3. Highlight an item in the Find list, and press ENTER to open the information page. 4. Press MENU to open the Options Menu, Highlight Find Near Here, and press ENTER. The Find Menu opens again with each category containing items near the item selected on the information page. 5. Select a category icon and press ENTER to open a Find list of items near the item. To find an item near another item: GPSMAP 76CSx Owner's Manual 19 BASIC OPERATION > USING THE FIND MENU 1. Press FIND to open the Find Menu. 2. Select an icon on the Find Menu, and press ENTER. 3. Press MENU to open the Options Menu, Highlight Change Reference, and press ENTER. The Map Page appears. 4. Use the ROCKER to pan the arrow (pointer) to the map location you want, and press ENTER. The Find list shows a list of items near the new map location. To find an item from another location on the map: Finding a Waypoint The Waypoints Page contains a list of all saved waypoints. Waypoints are stored in alphanumeric order and are also identified by a symbol assigned from a list of symbol types. 1. Press FIND to open the Find Menu. 2. Highlight the Waypoints icon, and press ENTER to open the Waypoints Page. 3. Use the ROCKER to select a waypoint, and press ENTER. The Waypoint Page opens. To find a waypoint: Waypoints icon 20 GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING THE FIND MENU Use the Geocache icon to view the list of geocache locations created using your GPSMAP 76CSx or downloaded from your computer. A geocache location is a waypoint with a special geocache symbol assigned to give special significance and to allow it to be separated from others on the waypoints list. For more information on creating a geocache point, see Geocache Setup instructions on page 71 and www.garmin.com/products/gpsmap76csx/. To find a geocache: 1. Press FIND to open the Find Menu. 2. Highlight the Geocache icon, and press ENTER to open the Geocache Page. You can view found geocaches or those that have not been found. 3. Use the ROCKER to highlight a geocache on the list, and press ENTER to open the information page. Finding a Geocache 4. Highlight the Go To button and press ENTER to navigate to the geocache location. When you navigate to a geocache, the Compass Page changes to Geocache Navigation mode and any additional information about downloaded cache location is shown in the comment field. When a geocache is found, the unit will mark the cache as found, log an entry into the calendar, and provide an option that, when activated, will show the nearest cache. Finding a City Use the Cities icon on the Find Menu to find any city listed in the mapping database (either in the basemap or from downloaded detailed mapping data). 1. Press FIND to open the Find Menu. 2. Highlight the Cities icon, and press ENTER The Cities Page shows a list of cities near your current location. To find a city: GPSMAP 76CSx Owner's Manual 21 BASIC OPERATION > USING THE FIND MENU 3. Select a city from the list and press ENTER to open the information page for the selected city. Or If the city you want is not listed, press MENU, select a search method, and press ENTER. 3. Use the ROCKER to select an exit, and press ENTER to open the information page. This page contains the exit description, a list of available services near the exit, and the distance and bearing from the exit to the highlighted service. 4. Select a service from the list, and press ENTER to open the information page for the selected service. 5. Select Save, Map, or Go To from the bottom of the page. Finding an Interstate Exit Use the Exits icon on the Find Menu to find an interstate exit. 1. Press FIND to open the Find Menu. 2. Highlight the Exits icon, and press ENTER. The Exits Page shows a list of interstate exits near your location. To find an interstate exit: 22 GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING THE FIND MENU 1. Press FIND to open the Find Menu. 2. Highlight the Addresses icon, and press ENTER to open the Addresses Page. If your unit has a GPS fix, the field is populated with your current region. You do not have to specify a city in the , as the database has information for the entire region. However, you can select a city if you want to reduce the possible number of address matches. In place of a city, you can use extended postal codes in select European areas. To find an address: 3. Highlight the field, and press ENTER. 4. Type the street number using the on-screen keypad. When finished, highlight OK and press ENTER again. 5. Highlight the field, and press ENTER. The street list opens. 6. Use the on-screen keypad to enter enough of the street name to show a match. When finished, highlight OK, and press ENTER. A list of matches appears. 7. Select the address you want, and press ENTER to open the Address information page. Addresses icon Addresses Page GPSMAP 76CSx Owner's Manual Matching addresses Information page 23 BASIC OPERATION > USING THE FIND MENU If you downloaded detailed mapping data, use the Intersections icon on the Find Menu to search for an intersection. When you enter the two street names and a city, the find feature matches that data with intersections in the map database. 1. Press FIND to open the Find Menu. 2. Highlight the Intersections icon, and press ENTER to open the Intersections Page. 3. If your unit has a GPS fix, the field is populated with your current region. You do not have to specify a city in the , as the database has information for the entire region. However, you can select a city if you want to reduce the possible number of intersection matches. 4. Highlight the field, and press ENTER. 5. Type the street name using the on-screen keypad. When finished, highlight OK, and press ENTER again. 24 Finding an Intersection 6. Repeat steps 4 and 5 to enter a street name in the field. When finished, a list of matches appears below. 7. Select an intersection, and press ENTER to open the information page. To find an intersection: List of matching Intersection intersections information page Searching for a Point of Interest If you downloaded MapSource detailed mapping, you can use the All Points of Interest icon on the Find Menu to locate items such as nearby restaurants, lodging, landmark, and public building. GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING THE FIND MENU 1. Press FIND to open the Find Menu. 2. Highlight the All Points of Interest icon, and press ENTER to show a list of all points near your current location. 3. Highlight an item in the list, and press ENTER to open the information page for the item. Or Press MENU to open the Options Menu where you can select options to help you narrow your search. To find a point of interest: Narrow search criteria using the Options Menu If you are searching for a restaurant that is part of a national chain, only the restaurant nearest to your location is shown when you search using the Find Nearest option. If you search using the By Name option, all of the locations for that chain in the mapping database are shown with the closest to your current location listed first. Custom Points of Interest You can create your own category for points of interest by using the Garmin POI Loader utility available from the Garmin Web site www.garmin.com/products/poiloader/. 25 4. Highlight the item you want from the list, and press ENTER to open the information page for the selected item. GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING TRACKS Using Tracks The Tracks feature creates an electronic bread crumb trail or "track log" on the Map Page as you travel. The track log contains information about points along its path, including time, location, elevation, and depth (depth requires NMEA input, see page 92) for each point. The track log starts recording as soon as the unit gets a location fix. The percentage of memory used by the current track log appears at the top of the Tracks Page. Percentage of memory used List of saved tracks 1. Press MENU twice to open the Main Menu. 2. Select the Tracks icon and press ENTER to open the Tracks Page 3. Highlight the Clear button, and press ENTER. A confirmation message appears. 4. Highlight OK, and press ENTER. 1. Press MENU twice to open the Main Menu. 2. Select the Tracks icon, and press ENTER to open the Tracks Page. 3. Highlight the Setup button, and press ENTER to open the Track Log Setup Page. To clear the track log: To set up a track log: Tracks Page 26 GPSMAP 76CSx Owner's Manual BASIC OPERATION > USING TRACKS Wrap When Full--when selected, the track log records over the oldest data with new data. Record Method--Distance records track points after a specified distance is traveled. Time creates track points after a specified time has elapsed. Auto allows you choose from five intervals. Interval--records a track according to the Record Method and Interval. Enter a specific distance, time, or frequency. Color--select the color of the active track on the map. 1. Press MENU twice to open the Main Menu. 2. Select the Tracks icon, and press ENTER to open the Tracks Page. 3 Highlight the Save button and press ENTER. A message appears asking you if you want to save the entire track. 4. Select Yes, and press ENTER to save the track. A "Saving Track" message appears followed by the Saved Track Page. GPSMAP 76CSx Owner's Manual Track distance Track color Track name Calculated area Saved Track Page To save the entire track log: Use the Saved Track page to rename the track, view the track distance and calculated area, and specify a color for the track on the Map Page 1. Press MENU twice to open the Main Menu. 2. Select the Tracks icon, and press ENTER to open the Tracks Page. 3. Highlight the Save button and press ENTER, a message appears asking you if you want to save the entire track. To save a portion of the track log: 27 BASIC OPERATION > USING TRACKS 4. Select No, and press ENTER to save only a portion of the track log. A map showing the entire track appears 5. Use the ROCKER to move the pointer to the point on the track line that you want to be the beginning point, and press ENTER. 6. Use the ROCKER to move the arrow to the point on the track line that you want to be the ending point, and press ENTER. A "Saving Track" message appears followed by the Saved Track Page. 7. With OK highlighted, press ENTER. 1. With the Track Log Page open and the Track Log on, press MENU to open the Options Menu. To calculate the area of a track: To view a track on the map: On the Saved Track Page, select the Map button, and press ENTER to open the Map Page. A map showing the entire track appears. Begin and End markers and user waypoints are added to the track. Use the Area Calculation option on the Options Menu to calculate the area of a track. 2. Highlight Area Calculation, and press ENTER to open the Area Calculation Page. 3. Press ENTER to start the area calculation. As you begin to move and define the area's boundaries, a Stop button appears at the bottom of the page. 4. When finished defining the area, press ENTER to open the page with a Save button. GPSMAP 76CSx Owner's Manual Saved track on the Map Page 28 BASIC OPERATION > USING TRACKS Elevation Begin marker Distance from Begin and End points End marker Start calculation 5. Press ENTER to save the new track to the Saved Tracks list on the Tracks Page. Save calculated track Track Profile Page Track Profiles After save a track, you have a record of the path you traveled and altitude profile. NOTE: This option is available only if Garmin MapSource U.S. Topo 24K map data is used. 1. Open the Saved Track Page, and press MENU. 2. Highlight Profile, and press ENTER to view the Track Profile. GPSMAP 76CSx Owner's Manual To view a track profile: The beginning of the track is marked by a flag. You can scroll across the track profile by pressing left on the ROCKER. As you scroll across the profile, the elevation for each point on the profile is shown at the top of the page and the distance from the Begin point and the End point are shown at the bottom. 3. At any point along the profile, you can press ENTER to show that point on the map. 4. Press MENU to use Zoom Ranges and Hide Symbols options. 29 BASIC OPERATION > USING TRACKS A Track Elevation Profile can also be created from Digital Elevation Models (DEM) maps (MapSource U.S. Topo 24K), which include elevation data contained in the map. When these types of maps are available, a Use Map Data - Use Track Data option menu appears when you select Profile. Navigating a Saved Track You can save your track log to use later as a TracBack®. When initiated, a TracBack route takes you back to the stored track log point you select. 1. With the Saved Tracks Page for the track or the Track Log open, highlight the TracBack button, and press ENTER to open the TracBack Page. A map showing the entire track appears and you are prompted to select the point you want to TracBack to. 2. Use ROCKER to move the pointer to the point on the map, and press ENTER to start navigating the TracBack. To Use the TracBack feature: 3. Select either Follow Road to route back to the selected point using available roadways, or select Follow Track to retrace your original path of travel. Highlight the Don't Ask Again option, and press ENTER if you want to use the same option each time you use TracBack. The Map Page opens, with directions to the first turn on the track at the top of the page. Move in the direction of the first turn. When you reach the first turn, directions to the next turn are shown, and so on, until you reach your destination. 4. To stop the TracBack, press MENU, and select Stop Navigation. GPSMAP 76CSx Owner's Manual 30 BASIC OPERATION > CREATING AND USING ROUTES Creating and Using Routes Route navigation allows you to create a sequence of intermediate waypoints that lead you to your final destination. The GPSMAP 76CSx lets you store 50 routes with up to 250 points each. 4. With the field highlighted, press ENTER to open the Find Menu. Creating a Route Routes icon You can create or modify a route using the Routes Page, and you can add waypoints to a route from the Find Menu. You can create more complex routes using a PC and MapSource mapping programs and then transfer them to the unit memory. Auto-Routes, which are generated when you select Go To for a Find item, map item, or waypoint, cannot be saved. Saved routes with more than 50 waypoints cannot be navigated using the Follow Roads option. 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Use ROCKER to highlight the New button, and press ENTER to open the Route Page. GPSMAP 76CSx Owner's Manual Setting up a route To create a route: 5. Use the Find Menu to select a route waypoint from one of the Find Menu groups and open the information page for the selected waypoint, city, exit, point of interest, and so on. 6. Highlight the Use button, and press ENTER to add it to the route. 7. To add more points to the route, repeat steps 4 to 6. You can rename the route if you want. 8. Highlight the Navigate button, and press ENTER to begin navigating. 31 BASIC OPERATION > CREATING AND USING ROUTES Navigating a Route After you create a route, you can begin navigation immediately or save it to the Saved Routes list. 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Highlight a saved route, and press ENTER to open the Route Page. 4. Highlight the Navigate button, and press ENTER. 5. Select Follow Road or Off Road from the prompt. 6. To stop navigating, press MENU, select Stop Navigation, and press ENTER. If you selected the Off Road option you can view only the list of points for a route from the Active Route Page. See "Routing Setup" on page 70. 1. On the Routes Page, highlight a saved route, and press ENTER to open the Route Page for the selected route. 2. Highlight the Navigate button, and press ENTER to begin navigation and show the route on the Map Page. To navigate a saved route: To preview the turns for an active route: When navigating a route, a guidance message and graphic view of turns in the route appear as you approach each one. Using the Follow Roads option on the Routing Setup Page increases the number of turns and shows an Active Route Page with a list of turns. Route Page Route on the Map Page 32 GPSMAP 76CSx Owner's Manual BASIC OPERATION > CREATING AND USING ROUTES 3. To view the list of turns on the route, press PAGE to open the Active Route Page. To view an individual turn on the list, use the ROCKER to highlight it, and press ENTER. The Turn Preview Page shows the turn and guidance text and a small field at the bottom showing the turn number in sequence and total turns in the route. Editing a Route After you create a route, use the Route Page to edit, change the route name, and review route points. 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Select a saved route, and press ENTER. 4. Highlight the route name field at the top of the Route Page, and press ENTER. To change the name of the route: Enter a new route name 4. To scroll through all turn previews, press up or down on the ROCKER. Press QUIT close the Turn Preview Page and return to the Active Route Page. GPSMAP 76CSx Owner's Manual Active Route Page when following roads Turn Preview Page Route Page 5. Use the ROCKER to operate the on-screen keypad and edit the route name. 33 BASIC OPERATION > CREATING AND USING ROUTES 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Select a saved route, and press ENTER. 4. Highlight a point on the Route Page, and press ENTER to open an options menu. 5. Highlight Review and press ENTER to open the information page for the route point. To review individual route points: 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Press MENU to open the Options Menu. 4. Highlight Delete All Routes, and press ENTER to clear the list of saved routes. A confirmation message appears, asking "Do you really want to delete all routes?" Select Yes, and press ENTER. 1. Press MENU twice to open the Main Menu. 2. Highlight the Routes icon, and press ENTER to open the Routes Page. 3. Press MENU to open the Options Menu. 4. Select Off Road Transition, and press ENTER to open the Off Route Transition Page. 5. Highlight the Route Leg Transition field, and press ENTER to view the list of options. 6. Select the method to use (Manual or Distance) when advancing the route to the next point. GPSMAP 76CSx Owner's Manual To delete a route: To select the off-road transition for a route: Route point review options Information page 6. Select Save (save the point as a waypoint), Map (show the point on the Map Page), or Go To (navigate to the point), and press ENTER. 34 BASIC OPERATION > CREATING AND USING ROUTES Remove All--removes all waypoints from the saved route. Route leg transition options Reverse Route--reverses the order of the route points in the saved route. Profile--creates a vertical profile of the route. NOTE: This option is available only if Garmin MapSource U.S. Topo 24K map data is used. Select Distance to enter a radius so that when you are within the entered distance, the GPSMAP 76CSx will lead you to the next point on your route. Select Manual to transition to the next waypoint anytime while navigating a route. Copy Route--makes a copy of the saved route with the same name, followed by a number. Delete Route--deletes the saved route. Change Data Fields--select different values for the two data fields at the bottom of the page. See page 54 for more information. Restore Defaults--restore route settings to the factory default settings. Using the Route Page Options The Route Page shows all points stored in memory for the route selected on the Routes Page. Press MENU to open the Route Page Options Menu. GPSMAP 76CSx Owner's Manual 35

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN GPSMAP 76CSX.

GARMIN offer a product for which we do not have the user manual? Let us know what you are looking for: site Internet, histoire, actualité, filiales, site Internet, mode d'emploi, driver, avis des utilisateurs, meilleur prix des produits, forum d'assistance aux problèmes, annuaire des marques, annuaire des constructeurs, répertoire des marques, répertoire des constructeurs, site Internet de la marque, site Internet du constructeur

Diplodocs allows you to download user manual GARMIN GPSMAP 76CSX, user guide GARMIN GPSMAP 76CSX, instructions GARMIN GPSMAP 76CSX, owner's manual GARMIN GPSMAP 76CSX, online manual GARMIN GPSMAP 76CSX.

Access web reviews GARMIN GPSMAP 76CSX, GARNIN, GPS & Navigation Kit.