User manual GARMIN IQUE 3600

integrated handheld Que applications guide TM © Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin® is a registered trademark and MapSource TM, iQueTM and QueTM are trademarks of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. February 2004 Part Number 190-00270-03 Rev. B Printed in Taiwan The Palm OS, HotSync, Palm Powered logo are registered trademarks and Palm Powered is a trademark of Palm Trademark Holding Company, LLC. Other brands may be trademarks of their respective owners. iQue 3600 Software License Agreement Introduction Software Agreement BY USING THE iQueTM 3600, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. or its subsidiaries (hereinafter collectively referred to as "Garmin") grants you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. Title, ownership rights and intellectual property rights in and to the Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America. i iQue 3600 Introduction FCC Compliance Information The iQue 3600 does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. The iQue 3600 complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and the receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. ii iQue 3600 CAUTION: Use the iQue 3600 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner's Manual--and thoroughly practice operation using the simulator mode prior to actual use. When in actual use, carefully compare indications from the iQueTM 3600 to all available navigation sources, including the information from other NAVAIDs, visual sightings, charts, etc. For safety, always resolve any discrepancies before continuing navigation. CAUTION: It is the user's responsibility to use this product prudently. This product is intended to be used only as a navigational aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. This product should not be used as an aid to determine ground proximity for aircraft navigation. CAUTION: The electronic chart is an aid to navigation and is designed to facilitate the use of authorized government charts, not replace them. Only official government charts and notices to mariners contain all information needed for safe navigation ­ and, as always, the user is responsible for their prudent use. MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify as required in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some degree. This is particularly true outside the United States, where complete and accurate digital data is either not available or prohibitively expensive. Introduction Warnings and Precautions WARNING: The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin iQue 3600 is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe. WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California's Proposition 65. If you have any questions or would like additional information, please refer to our web site at http://www.garmin.com/prop65. iii iQue 3600 Introduction Warnings and Precautions Important WARNING: For use in vehicles, it is the sole responsibility of the owner/operator of the iQue 3600 handheld to place and secure the unit so that it will not interfere with the vehicle operating controls and safety devices, obstruct the driver's view of driving conditions, or cause damage or personal injury in the event of an accident. Do not mount the iQue handheld over airbag panels or in the field of airbag deployment. Airbags expand with a rapid force that can propel objects in their path towards the vehicle driver or passengers causing possible injury. Refer to airbag safety precautions contained in the vehicle owner's manual. Do not mount the iQue handheld in a place where the driver or passengers are likely to impact it in a collision. The mounting hardware provided by Garmin is not warranted against collision damage or the consequences thereof. WARNING: When used in vehicles, it is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner, maintain full surveillance of all driving conditions at all times, and not become distracted by the iQue handheld to the exclusion of safe driving practices. It is unsafe to operate the controls of the iQue handheld while you are driving. Failure by the driver of a vehicle equipped with an iQue handheld to pay full attention to operation of the vehicle and road conditions while the vehicle is in motion could result in an accident with property damage and personal injury. Because the Garmin iQue 3600 handheld can be used for vehicular navigation, important safety considerations must be observed. Please read and observe the instructions on this page. Do Not Mount Where Driver's Field of Vision is Blocked Do Not Place Unsecured on the Vehicle Dash Do Not Mount in Front of Airbag Panels Do Not Mount in Front of an Airbag Field of Deployment iv iQue 3600 Introduction Introduction About the Manuals The Operating Instructions manual shows you how to: · Turn On and Off your iQue handheld, reset the iQue handheld, and to enter data in greater detail. · Use the HotSync® operation with your computer. · Exchange data with another handheld using ifr beaming or Data Card media. · Personalize your iQue handheld with your own setting preferences. · Back-up data or transfer data into a different iQue handheld, maintain your iQue handheld and other technical information. The Garmin iQue 3600 handheld is designed to use Garmin GPS technology integrated with the Palm OS® (Operating System) to not only manage your personal data but to provide you with navigational guidance, voice recording and an audio player. Your iQue handheld comes with three manuals. "Read This First" - Setup Guide The Setup Guide gives you computer connection and software installation instructions, and other important details. Before reading the other manuals, read the SetUp Guide which is printed on the Installation CD case. Que Applications Guide This Applications Guide describes how to use the installed QueTM add-on applications used for: · Navigation · Voice Recording (.WAV format) · Playing .MP3 and .WAV format Audio Files Operating Instructions The Operating Instructions manual describes all you need to know about how to use your iQue handheld and the applications that come with it. (Available only on the Installation CD.) v iQue 3600 Introduction Table of Contents Introduction........................................................ i GPS Applications ............................................... 1 Software License Agreement ..........................................i FCC Compliance Information ......................................ii Warnings and Precautions ...........................................iii Important ..............................................................iv About the Manuals .......................................................v Introduction ...........................................................v "Read This First" - SetUp Guide..............................v Que Applications Guide..........................................v Operating Instructions............................................v Table of Contents ........................................................vi The Que "Hard" Button ................................................1 Initializing the GPS Receiver.........................................2 Using QueGPS .............................................................2 GPS Receiver Status......................................................4 QueGPS Options..........................................................5 New Location..........................................................6 New Elevation.........................................................6 Using QueMap .............................................................7 Viewing the Map Page.............................................7 Using the QueMap Application Selector Icons ........9 Using Preferences for QueMap..............................11 Location Formats and Map Datums ......................12 Measure Distance..................................................13 Delete Map Data ...................................................14 Using QueFind...........................................................15 Searching for Find Items.......................................16 Finding Cities .......................................................17 Finding an Address...............................................18 Finding an Intersection.........................................20 Finding a Point of Interest.....................................21 Finding Waypoints................................................22 Using Waypoints ........................................................23 vi iQue 3600 Introduction Table of Contents Using a Waypoint as a Route Destination ..............25 Editing Waypoints ................................................25 Setting a Location.......................................................28 Creating a Waypoint using an Existing Address Book Entry.....................................................................28 Using QueTracks ........................................................29 Using QueRoutes........................................................31 Creating Routes ....................................................33 Using QueMap to Select a Destination ..................34 Using the Address Book to Select a Destination.....34 Using the Date Book to Select a Destination..........35 Recalculating a Route............................................35 Using a Detour......................................................35 Stopping and Resuming Route Navigation ............36 Customizing a Route.............................................36 Saving a Route ......................................................37 Route and Guidance Preferences ...........................37 Using Routing Voice Prompts................................39 Using QueTurns .........................................................40 Using QueTrip............................................................41 Audio Applications .......................................... 42 Using QueVoice..........................................................42 Managing Voice Files.............................................43 Using Options to customize QueVoice ..................44 Attaching and Removing a Location to Voice Files 45 Importing and Exporting QueVoice Files .............46 Using QueAudio.........................................................48 Time Applications ............................................ 50 Using QueClock.........................................................50 Using QueSun and Moon ...........................................52 Using QueHunt and Fish............................................52 Downloading Map Data .................................. 53 Using MapInstall ........................................................53 Using MapSourceTM ...................................................54 vii iQue 3600 Introduction Table of Contents Additional Information.................................... 55 Specifications .............................................................55 Internal System.....................................................55 Standard Applications...........................................55 Navigation features ...............................................56 Physical ................................................................56 GPS performance ..................................................56 Power ...................................................................56 What is WAAS? ..........................................................57 What is Differential GPS (DGPS)?...............................57 What is a datum, and which should I use? .................58 Location Coordinates, how to edit or assign them .....59 Index................................................................ 60 viii iQue 3600 Using the Que Applications Hard Button Pressing the Que "Hard" Button on the front of your iQue handheld allows you to quickly access selected applications. Use the Que Hard Button to: · Quickly access and display Applications · Re-activate the iQue when in the "Auto-Off" mode. · Press and hold to hear GPS status or next navigation prompt. GPS Applications The Que "Hard" Button To display Que applications using the Que button: 1. Tap the Prefs application icon to display the Preferences page. 2. Tap the symbol in the Menu bar at the top of the page to display the pick list of preferences and select Que. 3. Tap the symbol next to the option below the "Preferences" title block to display a list of Que preferences and then tap Que Button to display the Que Button options check list. 4. Use the stylus to check boxes for the Que applications you desire. 5. Use the arrows to change the order of the Que Applications. The application at the top of the list displays first. Que (Q) Hard Button Buttons Page To display other applications using the Que button: While designed for quick access to navigation applications, the Que button can be used to display any application on the list. 1. Tap the Prefs application to display the Preferences page. 2. Tap the symbol preceding the text at the top of the page to display the pick list of options. Then tap the Buttons option to display the button customizing page. 3. Tap the symbol next to the Que Button to display the list of Applications to choose from. Que Button Page Display Options 1 iQue 3600 GPS Applications Initializing the GPS Receiver Initializing the Receiver The GPS Receiver must be initialized (given an opportunity to determine its location) before you can begin using it for navigation. Before it can receive signals from GPS satellites overhead, you must turn the receiver on. This can be accomplished by deploying the antenna on the back of the iQue handheld by rotating it up to a horizontal position (parallel with the horizon). In order to receive satellite signals, you must have a clear view of the sky. Satellite signals cannot pass through solid materials (except glass) or dense overhead tree cover. When the unit initializes for the first time it may take as long as 15 minutes. This time can be shortened by using the map to point to the general area in which you are currently located (see page 6). Anytime you have traveled more than 600 miles with the GPS receiver turned off, the iQue handheld must again find its location by reinitializing. Using QueGPS QueGPS is an information type application that displays the current status of satellite reception by showing the location and numbers of the satellites in the sky overhead. A signal strength bar at the bottom of the page shows the signal strength of each satellite being received. Use QueGPS to: · Observe the status of GPS satellite signal reception. · View the current date and time. · Determine your current location coordinates and their accuracy. · Determine your current speed. · Determine your approximate elevation (altitude above mean sea level). GPS Antenna in the On Position Pull out and rotate up to the On Position Best signal reception can be attained when positioning the antenna horizontally (parallel with the horizon). 2 iQue 3600 To view the QueGPS Satellite Status Page: 1. Tap the HOME icon to display the applications launcher, then tap the QueGPS icon. 2. Or, simply tap the GPS Status Area in the center of the Applications Status Bar. GPS Applications Using QueGPS Acquiring Satellites Message At the top of the Satellite Status Page is a message containing the status of the GPS receiver and a sky view array on the left side representing the position of satellites in the sky overhead with your position in the center of the two circles. The outer circle indicates the horizon while the inner circle a position 45o from the horizon. The numbers displayed indicate the number assigned to those satellites. A bar graph at the bottom of the page displays the strength of signals being received from each satellite. An "Acquiring Satellites" message is displayed until at least three satellites with sufficient signal strength have been received. When the GPS receiver has determined its location, a "2D" message appears and your location coordinates display at the top of the left hand column. On the right, the date and time displays, and if you are moving, your current speed displays as well. When you have sufficient signals from four or more satellites, a "3D GPS Location" message appears ("3D Differential Location" with WAAS enabled) and the approximate elevation and accuracy of your current position displays at the bottom of the right hand column. All of this information continues to update as you navigate. 2D GPS Location Message At least three satellite signals of sufficient strength are required to generate a 2D location fix Menu Bar Current Location GPS Satellite Location Sun and Moon Position Applications Status Bar GPS Status Area 3D Differential Location (with WAAS enabled) Date and Time Speed Approximate Elevation Accuracy GPS Signal Strength Differential Navigation (D) (with WAAS enabled) Four or more satellite signals of sufficient strength are required to generate a 3D location fix 3 iQue 3600 GPS Applications GPS Receiver Status GPS Receiver Status: On, Off or Acquiring Satellites The GPS Receiver can be in three states, On, Off, or Acquiring (searching for enough satellite signals to determine its location). To determine the GPS status at a glance: 1. Observe the small color window at the center of your handheld status bar. Acquiring Satellites 2. When GPS is On and searching for satellite signals, the window will appear as shown in the top left illustration. 3. When enough satellite signals are being received to establish a location fix, the window will appear as shown in the middle left illustration. 4. When the Antenna is closed and the GPS is Off, the window will display a sky with no satellites. Receiving Satellites (Ready to Navigate) It is IMPORTANT to remember that whenever the antenna is not in the fully closed position, that the GPS receiver is operating. The GPS receiver can, from time to time, lose satellite signals due to interference from tree cover, buildings, etc., so monitoring the GPS Status Window from time to time is recommended. If you don't want the GPS Receiver On, and particularly when indoors, keep the antenna closed! GPS turned Off (Conserves Battery Power) You can tap the Satellite Status window at any time to display the QueGPS application and view satellite status in detail. 4 iQue 3600 To use QueGPS options: 1. Tap the QueGPS application tab or the Menu icon to display the Options Menu. 2. Observe the list of options: · Tap Preferences to display the GPS preference options. · When in 2D mode, tap New Elevation to reset the elevation. · Tap New Location when initializing the GPS Receiver if you have moved over 600 miles from your last use location or if you have not powered up the unit in over thirty days. Select New Location for Initialization Set New Elevation Preference Settings GPS Applications QueGPS Options To use QueGPS preferences: 1. Tap the Preferences option to display the GPS Preferences Menu. 2. Observe the list of options with check boxes: · Tap WAAS Enabled to enable the Wide Area Augmentation System operating mode. (See Additional Information about WAAS on page 57.) · Tap Battery Saver to change the rate at which the GPS receive updates your position data to conserve battery power. The GPS receiver slows the frequency at which it calculates your location and therefore requires less battery power with the result being a slight loss in position accuracy. The GPS is turned completely Off when the antenna is fully closed. QueGPS Options You cannot operate in the WAAS and Battery Saver modes at the same time. If you attempt to check both boxes, a message will display and the last option checked will remain on after you tap the OK button. QueGPS Preferences Menu 5 iQue 3600 GPS Applications QueGPS Options New Location New Location Options Window The GPS Receiver must be re-initialized (given an opportunity to determine its location) if you have moved more than 600 miles from your original location. To speed up this process, you can use the map to mark your approximate location. This must be selected before the iQue handheld has determined your location on its own. To establish a new location: 1. Tap the New Location option to display the "New Location" window. Tap either Automatic or Use Map. 2. If you choose Use Map, use the stylus to pan the map to your current general location and tap it to place a new location arrow there. New Elevation The GPS Receiver can determine your approximate elevation, but it isn't as accurate as your horizontal location. If you have a reliable alternate source for determining your elevation, you can enter that information in the "New Elevation" dialog window, but only before the receiver determines your location. New Location on Map Page To enter a new elevation: 1. Tap the New Elevation option to display the "New Elevation" page. 2. Use the Graffiti® 2 input area to enter the new elevation. 3. Tap the OK button to return to the QueGPS application. New Elevation Window 6 iQue 3600 Using QueMap GPS Applications Using QueMap The QueMap application displays a detailed map of the area surrounding your current location. It allows you pan the map with the stylus as well as view your progress when navigating. Your current location is shown as a solid black arrow. When in the "Track Up" mode, a north reference arrow appears at the top left corner to orient the map. When the Track Log feature is active, your path of movement is indicated by a dotted Track line. Use QueMap to: · · · · · Determine your current location View your progress while moving Locate and navigate to nearby map items Follow a route line when navigating Highlight and view information about locations on the map Map Orientation (Track Up) Current location icon To launch the QueMap application: 1. Press the Que applications button on the front of the handheld to display QueMap, or use the Applications Launcher and tap the QueMap icon to display the Map Page. Type of map data displayed Viewing the Map Page The Map Page is the primary feature of the QueMap application. From this page you can observe a triangular arrow that indicates your current location and direction of travel. As you move, the arrow moves with you, turning when you turn and stopping when you stop. Display Mark Center Location Format Location on Map Pan Map Selector Information with Stylus Button Map Scale Selector View Area Selector 7 iQue 3600 GPS Applications Using QueMap The Map also displays detailed geographic information such as highways and roads, lakes and rivers, cities, waypoints and residential streets, depending on the detail of map data being used. Detailed maps can be loaded from map data CD's using the MapInstall feature as explained on page 51 of this guide. There are two options: North Up and Track Up. North Up orients the map like a paper map, while Track Up orients the map in the direction of travel. As you travel to the edge of the display, the map moves (redraws) to constantly show your current location. When using "Track Up", the North arrow indicates the map orientation. When the "Pan Map with Stylus" mode is selected, dragging the stylus across the screen causes the map to pan with the movement of the stylus. Tapping the stylus on the map places a map pointer on any selected location on the map. If that location is supported by detailed mapping data a description will display, briefly. Any point on the map can be saved as a waypoint by tapping the Waypoint Marker Flag in the map toolbar. The map color can automatically compensate for the difference in day and night lighting conditions. See QueMap preferences on page 11. The map scale can be changed to show more map area with less detail or more map detail with less area. Rotating the Thumb Wheel on the side of the iQue handheld up or down or pressing the Up and Down keys on the front of the unit increases or decreases the scale in single increments. To move to a specific scale, use the Map Scale Selector mode. . Rotate the Thumb Wheel up or down to change the map scale. Panning the Map and Marking Map Items with the Stylus 8 iQue 3600 Using the QueMap Application Selector Icons GPS Applications Using QueMap With QueMap displayed tap the desired selector to activate the feature as described below: Tap the Display Format icon on the map tool bar to toggle between displaying and hiding the navigation data fields. Tapping the icon toggles through three format options (see below). Display Format Selection 1 Navigation Message & Data Fields Shown 2 Data Fields Only 3 Full Map Navigation Message & Data Fields Hidden Position Arrow centered on Map 1 2 3 Map Point Information Tap the Waypoint Marker Flag on the map tool bar to display the "Mark Waypoint" entry window for your current location (Position Arrow) or a "New Waypoint" entry window for the Map Pointer. The window will display with a name describing the location if identified as an item in the map data or as Waypoint 1, 2, 3 etc. Tap the Information icon to display information about a location identified by the Map Pointer on the Map Page. When tapped, an information window displays describing the location and distance if identified as an item in the map data or a position coordinates (i.e. lat/lon). Tap the Position Arrow icon to center the map on your current location. Pressing the Escape (ESC) key also centers the map. Waypoint Marker and Information Dialog 9 iQue 3600 GPS Applications Using QueMap Tap the View Area icon to allow you to define an area on the map with the stylus that will be enlarged when you lift the stylus from the screen. Select a point adjacent to the area you want to enlarge and then drag the stylus to create a box around the area. Lift the stylus to complete, allowing the map to redraw. Note that when the View Area Selector is active the Pan Map feature is not usable. Tap the Pan Map icon to allow the stylus to drag the map and to mark map items with the map pointer (Panning Arrow). Place the stylus anywhere on the map and then move the stylus. The map moves with the stylus and exposes the part of the map previously out of view. Lift the stylus to stop panning. Map Scale Selector View Area Selector QueMap Menu Pan Map Selector Tap the Map Scale icon to display the list of map scales. Drag the arrow to scroll through the entire list of scales. Tap the scale you want and the map will display at that scale. QueMap Menu Tapping the Menu icon, with QueMap displayed, opens the QueMap Menu at the top of the page with the following options: Options - Set map display Preferences (page 11) and view information about Map Data and QueMap. Que - Create a Route To a map point (page 33) and Measure Distance on the map (page 13). Delete - Remove basemaps and detailed maps from either the unit memory or SD storage card (page 14). 10 iQue 3600 Using Preferences for QueMap GPS Applications Using QueMap Lines Use Maps Preferences to: · Reduce "Map Clutter" by controlling how items are displayed. · Set the maximum Zoom scale at which map items display. · Control the display of multiple map features. The factory (default) settings for these preferences allow you to operate the QueMap application with confidence. As you become more familiar with its operation, you may desire to customize the application to fit your needs. Each preference window is provided with a "Help" button to explain preference settings in detail. These pages provide an overview of the preferences available. Most Map Preferences offer a "Text Size" option selector and a `Maximum Zoom" Selector option. Points Areas Cities Marine Map Preferences Pages are accessed by tapping the symbol to the right of the Maps option to display the list of map preferences. 11 iQue 3600 GPS Applications Using QueMap Topographic Information In all preferences, tapping the Help button will provide detailed information about those preferences. For more information about Heading, Course and Bearing lines, consult the Garmin web site at www.garmin.com/aboutGPS/. Detailed map information preferences can be set to display selected detailed maps stored in the iQue or on a Secure Digital Card. See page 53 for more information on detailed map MapInstall procedures. The Miscellaneous preference options provide check boxes to allow you to turn on or off some features as you prefer. Navigation Miscellaneous You may want to experiment with such features as AutoZoom (sets the maximum scale for display of map items in conjunction with the map detail setting), Accuracy Circle (Defines your location within the confines of the circle. Circle size is determined by map resolution and GPS receiver accuracy), and Basemap to determine your preferences. Location Formats and Map Datums Detailed Maps While Location preferences are not a part of Map Preferences, you may want to reset them to match those on paper maps that you plan to use in conjunction with GPS navigation. You can display position coordinates using specific formats and datums selected from the Que Preferences, Location options. Detailed information about how to use formats and datums can be found on page 58. Location 12 iQue 3600 Using Measure Distance GPS Applications Using QueMap Use Measure Distance to: · Measure the distance from your current location to a point on the map. · Determine the distance between two selected points on the map. To measure distance on the map: 1. Tap Measure Distance from the QueMap Menu Que options list to display the Measure Distance Page. The map displays at a scale of 30 miles. Use the Map Scale Selector, the Pan Map or View Area tool to adjust the map to include the map points you want to measure. 2. To measure the distance from your current location to a map point, tap the point with the stylus to mark the point. Read the distance in the field below the map. If you want to create a route to the map point, tap the QueRoutes icon on the tool bar and follow instructions on page 33. Note that the route distance may be somewhat greater because the distance was measured in a direct line and routes typically follow roads. 3. To measure the distance between two points on the map, first, tap the desired point on the map, then tap the Map Pin icon on the tool bar to move the Map Pin to that point. Next, tap the map point you want to measure to and observe the measurement in the field below the map. Tapping the QueRoutes icon will not create a route between the two points. 4. When finished measuring distance, tap the Done button to close. Measure Distance Page Map Pin Distance Measured Measuring between two map points 13 iQue 3600 GPS Applications Using QueMap Using Delete Maps Basemap and Detailed mapping data can be stored on both the handheld memory and SD card. The Delete option allows you to manage your storage utilities. Use Delete Maps to: · Remove mapping data no longer needed for navigation to free-up storage space for new mapping or other data. To delete mapping data: 1. Tap Delete from the QueMap Menu to display the four delete options. 2. Determine what you want to delete and tap your selection to display the delete Yes/No prompt. QueMap Menu Delete Options 3. Tap Yes if you are certain that you want to delete the data and close. 4. Tap No to cancel and close. Delete? Prompt 14 iQue 3600 Using QueFind GPS Applications Using QueFind The QueFind Application displays lists of geographic points in the map database and downloaded detailed maps. Use the QueFind application to: · Use existing lists of map data items such as Waypoints, Cities, and Points of Interest to find desired destinations and navigate to them using the QueRoutes application. · Find items contained in the map data and in the Address Book. · View details about items, such as addresses and telephone numbers. · Find items to use as a destination for a route. To launch the QueFind application: 1. Tap the Magnifying Glass icon on the status bar or next to the Graffiti® 2 input area. 2. Or use the Application Launcher and tap the QueFind icon. Once the QueFind application is displayed, tap the icon of the category in which you want to find items. Palm OS® Find is a Palm OS® application for finding items within the PalmOS® (Operating System). Tap this to find an Address Book item, etc. 15 iQue 3600 GPS Applications Using QueFind Find Items List Search Method Searching for Find Items To select and view an item from a QueFind category: 1. Once you have selected a category from the display of Find icons, the Find items list is displayed. 2. You may choose a search method for an item using Near Current Location, By Name, or Near Other options. If the map pointer is present on the map page, Near Map Pointer is available to allow you to search for items near the map pointer. If a route is active, Near Route Destination and Near Current Route are also available. 3. You can shorten your search list by entering the name of the item at the top of the page in the "Name" or "Containing" field. 4. When the list is displayed, highlight a single item. 5. Tap Details to display an information page that provides a map showing the item location, the distance from your current location, the item name along with item type, address and phone number (if available). Tap the Done icon to return to the list or the Save Waypoint button to save it on the Waypoints list. 6. Tap Route To to generate a route to this item. 7. Tap Done to return to the previous QueFind page. QueFind Categories List Search Methods Near Current Route - Distance from Route - Find Options 16 iQue 3600 Finding Cities To select a city from the Cities list: 1. Tap the QueFind icon then tap Cities to view the Cities List. 2. You may choose the search method to select Nearest Current Location or By Name options. If the map pointer is present on the map page, Nearest Map Pointer is available to allow you to search for cities near the map pointer. 3. You can shorten your search list by entering the name of the city at the top of the page in the "Name" or "Containing" field. 4. When the list is displayed, highlight a single city. 5. Tap Details to display an information page that provides a map showing the city location on the map, the distance from your current location, the city name along with state and country information. The title of the page identifies the size category of the city (if that information is available). Tap the Done button to return to the list or the Save Waypoint button to save it as a waypoint on the Waypoints list. 6. With the city highlighted on the list, tap Route to generate a route to this city. 7. Tap Done to return to the previous QueFind page. The "New Waypoint" window displays when saving a city item as a waypoint. GPS Applications Using QueFind Cities List with search methods menu displayed City Details Page with map, distance, map scale, and city information 17 iQue 3600 GPS Applications Using QueFind Finding an Address To find an address: 1. From the QueFind application, tap the Addresses icon to display the Addresses page. 2. If you know the region (state, province), city, or postal code of the address, enter them now. These will be used to limit the search results, as well as limit the choice of street and city names. Region: tap to select street To enter the regions, city or postal code, tap on the selector trigger, then tap on an item in the list. If you select a city, the region field is hidden; to show the region field again; tap on the city name and tap the Use All button at the bottom of the Select City Name dialog box. To again search all regions or postal codes, tap on the region or postal code selector trigger and then tap the Use All button at the bottom of the dialog box. 3. Enter the desired street number in the "Number" field. QueFind Address Entry Fields 18 iQue 3600 4. Tap the Street field to display the "Select Street Name" dialog box. Use the Graffiti® 2 input area to begin entry of the street. When the desired name of the street is displayed, tap it to place it on the page. Street names are entered and selected using only the body of the street name, For example, if the street portion of the address you are finding is "E. Main St", enter only "Main" and select "Main" from the list. Likewise if the street portion of the address is "N 13th Ave" enter only "13th' and select "13th" from the list. Tap the Prefix/Suffix button to display options for the street prefix and suffix. If there is no prefix or suffix to be added, select None. After you have made your selections, tap OK to return to the QueFind Addresses page. 5. Tap the Search button to display a list of matches for teh address. Address Detailed Information Page GPS Applications Using QueFind Search for Best Matches 19 iQue 3600 GPS Applications Using QueFind Finding an Intersection To find an intersection: 1. From the QueFind application, tap the Intersections icon to display the Find Intersections page. 2. If you know the region (state, province), city, or postal code of the address, enter them now. These will be used to limit the search results, as well as limit the choice of street and city names. Find Intersection To enter the regions, city or postal code, tap on the selector trigger, then tap on an item in the list. If you select a city, the region field is hidden; to show the region field again, tap on the city name and tap the Use All button. To again search all regions or postal codes, tap on the region or postal code selector trigger and then tap the Use All button. 3. Tap the Street 2 field to display the "Select Street Name" dialog box. Begin entering the street name. When the desired name of the street is displayed, tap it to place it on the page. Street names are entered and selected using only the body of the street name, For example, if the street portion of the address you are finding is "E. Main St", enter only "Main" and select "Main" from the list. Likewise if the street portion of the address is "N 13th Ave" enter only "13th" and select "13th" from the list. Tap the Prefix/Suffix button to select the remainder of the street name if applicable. 4. When fields are completed, tap the Search button. 5. Select a match from the search results and tap the desired button at the bottom of the page. List of Matches for Entry Intersection Detail Information Page 20 iQue 3600 Finding a Point of Interest GPS Applications Using QueFind Points of Interest Options Icons Because the amount of information available in the Points of Interest category is so extensive, it is divided into smaller categories to help refine your search for an item. To use QueFind Points of Interest: 1. Tap the QueFind icon from the Que Applications launcher, the Graffiti® 2 input area or the small icon at the base of the screen to display the QueFind application. 2. Tap the desired category to display the list of items in that category or the entry dialog for Addresses or Intersections. If you selected a category with a list, you are given a choice of displaying items by name or only those near your current location. You can further refine your search by selecting a sub-category from the "All-Types" list. 3. Tap the desired subject to display the refined list of items related to that subject. With the list displayed, highlight a single Point of Interest item. 4. When you tap Details, an information page displays, showing a location map and detailed information about the item (phone number, address, etc.). 5. After you have viewed details about a Find item, that item is added to the "Recent Finds" list to simplify the process for reviewing. To review an item, simply tap the Recent Finds icon to display the list. Note that mapping data for Man-made Places through Tides Options (see icons) is available only on certain types of detailed maps, other than City Select. These types of maps must be purchased separately. Consult your Dealer or the Garmin website (www.garmin. com) for information about maps. 21 iQue 3600 GPS Applications Using QueFind Finding Waypoints A waypoint is an Address Book entry with a set location. Only Address Book entries with set locations will be displayed in the Waypoints list. To learn specific information about saving a location as a waypoint, refer to the section titled, "Using Waypoints" on the following page. To find a waypoint using QueFind: Waypoints List 1. Tap the QueFind icon, then tap the Waypoints icon to view the Waypoints List. To narrow the list, tap the icon under the QueFind tab to display those waypoints nearest your location. 2. To view information for a highlighted waypoint, tap Details. To create a route to a waypoint, tap Route To. 3. Tap Done to close. Waypoint Details Page 22 iQue 3600 Using Waypoints GPS Applications Using Waypoints Mark Waypoint Dialog Used for saving a location as a waypoint A waypoint is an Address Book entry with a set location. Any QueFind location can be saved as a waypoint. To mark your current location as a waypoint: 1. There are two methods for marking your location as a waypoint: · Use the stylus to tap the waypoint icon at the base of the map. Be certain the map pointer arrow is not displayed or the location on the map, marked by the arrow, will be saved as the waypoint. · Press in and hold the Thumb Wheel on the side of your handheld. 2. The "Mark Waypoint" dialog box is displayed with the waypoint automatically named as "Waypoint". (Each subsequently marked waypoint will be named "Waypoint 1, 2, 3", etc.) 3. Use the Graffiti® 2 input area to rename the waypoint to one more descriptive of your location. 4. To save the waypoint to the Address Book, tap OK. Waypoint Address View Dialog With added information. Waypoint Address Edit Dialog Allows you to add detailed information about a Address Location Map For a waypoint 23 iQue 3600 GPS Applications Using Waypoints Waypoint Marked on the Map Page To save a point on the map as a waypoint: 1. With the Map displayed, use the stylus to tap a desired location on the map which causes the map pointer to display. If the point on the map where you tapped has descriptive information in the map database, it displays for six seconds. 2. Once the map pointer is at the desired location, tap the Waypoint icon at the bottom of the map to display the "New Waypoint" window. Observe that the "New Waypoint" window has named the location as an address, intersection, or named map item if supported by data in the map database. If not supported, it names the location as Waypoint 1, 2,3, etc. 3. You can use the Graffiti® 2 input area to rename the waypoint. New Waypoint Window 4. If the point on the map is an address, checking the Include Address Data option will copy the address information to the new waypoint. 5. To save the waypoint to the Address Book, tap OK. To view a waypoint on the map: 1. From the Address Book application use one the following procedures: · Tap either the Flag icon or the Location button from the "Address View" form. · Tap the Flag icon at the right side of the waypoint entry on the list view. Waypoint Details Page with Route Shown 2. From QueFind, tap Waypoints, highlight a waypoint in the list, and tap the Details button. 24 iQue 3600 Using a Waypoint as a Route Destination To select a waypoint using QueFind: 1. Tap the QueFind icon in the Status Bar or to the side of the Graffiti® 2 input area. 2. Tap the Waypoints icon to view the Waypoints list. 3. Highlight the desired waypoint and tap Route To. 4. Observe the route on the Map Page. GPS Applications Using Waypoints QueFind Waypoints List with highlighted waypoint To select a waypoint using the Address Book: 1. Tap the Address Book icon to launch the Address Book application. 2. Tap the desired item to display the "Address View" page. 3. Tap the QueRoutes icon in the Status Bar or to the side of the Graffiti 2 input area. 4. Tap the Route To option. 5. Observe the route on the Map Page. Waypoint Location from the Address Book Editing Waypoints To edit a waypoint using the Address Book: 1. Launch the Address Book and select the desired waypoint from the list. 2. The Address View page displays. 3. Tap Edit to display the Address Edit page. 4. Make the desired changes and tap Done. QueRoutes "Route To..." option 25 iQue 3600 GPS Applications Using Waypoints To edit a waypoint using the Waypoints List: 1. Launch the QueFind Application then tap the Waypoints icon to view the Waypoints List. 2. Tap the waypoint to highlight it and then tap Details to display the Waypoint Detail page. 3. Tap Edit Waypoint to display the Address Edit page. To edit a waypoint symbol: 1. From the Address Book access the "Address Location" window by tapping the Flag icon to the right of the address listing. Address View Dialog 2. Tap Show Info to display the Information Window for that Waypoint. 3. Tap the Symbol icon to display the "Select Symbol" window. 4. Tap a symbol to select it. 5. The description of the symbol is displayed at the bottom of the screen. 6. Tap the Arrows at the bottom right to move between pages of symbols. 7. Tap OK to use the selected symbol or tap Cancel and keep the current symbol. Address Edit Dialog 26 iQue 3600 To change the location of a waypoint: 1. Access the waypoint you want to move, from the Address Book. 2. Once a waypoint has been identified, tap it to display the Address View page and then tap the Location button to display the Address Location page. 3. Tap the "Show Info" button at the bottom of the page to display the Information Page for that waypoint. 4. Tap the information contained in the dotted box around the Location information to display the "Edit Location" window. 5. You have three methods in which to change the waypoint location: · Tap the Find button to use QueFind to find a location for the waypoint. · Tap the Manual button to enter new location coordinates using the Graffiti® 2 input area. The "Legal Value" text will indicate the range of numbers or letters that are allowed for each field of the current location format. · Tap the Map button to display the Map page which will allow you to tap anywhere on the map and designate it as the new location. A dotted line will connect the new location with the old and the word "MOVE" will appear below the map pointer. Tap Done to complete the move. 6. You can indicate that the altitude is negative by tapping the arrow adjacent to Altitude: to select the negative symbol. Moving a waypoint on the Map GPS Applications Using Waypoints Edit Location Options Moving a waypoint by setting new position coordinates 27 iQue 3600 GPS Applications Setting a Location Creating a Waypoint using an Existing Address Book Entry An existing Address Book entry can be made into a waypoint by setting a location. To set a location to an Address Book entry using QueFind: 1. Tap the Address Book icon to launch the Address Book. 2. Tap the selected item to display the "Address View" page. 3. From the Address View page, tap the Location button to display the "Set Location" options window. 4. You have three methods in which to set the waypoint location: · Tap the Find button to use QueFind to find a location. · Tap the Manual button to enter new location coordinates. · Tap the Map button to display the Map page which will allow you to tap anywhere on the map and designate it as the location. Address List item without location marker flag displayed A location can also be set for an address using Contact Location in the PalmTM Desktop. Refer to the Contact Location Help for instructions. Find Address Page Set Location window Address View page. Tap the "Location" button to Set a Location Tap the "Find" button 28 iQue 3600 Using QueTracks GPS Applications Using QueTracks QueTracks is an application that records your path of travel. This can be used to travel back to your point of origin, and be saved for later use. Use the QueTracks application to: · Save a portion of the Track Log for later use. · Clear the Track Log. To use the QueTracks application: 1. Tap the Applications Launcher icon to display the QueTrack icon. 2. Tap the QueTracks icon to display the Tracks Page. Observe the Track Log capacity bar graph. The graph indicates the amount of Track Log used and displays the percent used above the bar. Below the bar graph is the Saved Tracks list which displays those tracks you have saved for later use. 3. To save all or a portion of the Track Log, tap the Save button. The "Save Track" dialog appears with the entire Track Log chosen. To choose to save only a portion of the Track Log, select a Start and End time. To return to saving the entire Track Log, tap the Entire Log button. 4. To clear the Track Log, tap the Clear button. QueTracks Page Save Track Log Dialog Track Start and End Options 29 iQue 3600 GPS Applications Using QueTracks To view details of a saved track: 1. Tap the QueTracks application icon to display the Tracks Page. The tap the desired track in the "Saved Tracks" list to display the "Saved Track Details" page. 2. To rename any Track, tap the name at the top of the Saved Track Details" page and then use the Graffiti® 2 input area to enter a new name. 3. To assign a new color to the track when it is displayed on a map, tap the Color name at the top of the page. Tap the desired color from the list to select and close the list. 4. If the Show On Map option is checked, the saved track is displayed on map pages. Saved Track Details Page Track line Your Current Location Review Track Page 30 iQue 3600 Using QueRoutes GPS Applications Using QueRoutes QueRoutes is an application that provides you with a graphic route line, plus graphic and voice turn-by-turn directions to a chosen destination. You can select a destination from any of the QueFind application categories, the Address Book, the QueMap application, or a location attached to an entry in the Date Book application. QueRoutes functions primarily as a route management tool once you have selected a destination. Use the QueRoutes application to: · · · · · Recalculate the route to you current destination. Add stops or new waypoints (vias) to customize your route. Save specific routes for use at a later date. Set the preferences for routing. Stop and resume navigation of an active route. To launch the QueRoutes application: 1. Tap the Applications Launcher icon to display the QueRoutes icon... or easier yet, tap the QueRoutes icon at the side of the Graffiti® 2 input area or on the Status Bar. QueRoutes Application Active Route Displayed on Map Page 31 iQue 3600 GPS Applications Using QueRoutes Creating a Route to a QueFind item using the QueRoutes launcher. Creating Routes To begin a route all you really need is a destination. A route can be activated from several handheld applications that support the location data needed to determine a destination for a route. To select a destination using QueFind: 1. Select an item from any of the QueFind application search categories. Refer to the QueFind section for detailed instructions on searching for items. 2. Tap the QueRoutes icon on the status bar to display the QueRoutes dialog box. 3. Tap the Route To item at the top of the dialog box. The name displayed depends on the item selected. 4. The Que Map application is displayed and a "Calculating Route" animated graphic replaces the satellite graphic at the center of the status bar. When the satellite graphic returns, the route is an "Active Route". 5. Follow the voice prompts and turn preview pages to navigate to your destination. Highlighted Find List item Tap the "Route To" button Route shown on the Map Calculating Route 32 iQue 3600 Using QueMap to Select a Destination GPS Applications Using QueRoutes You can create a route to any place on the map by using the stylus to place the map pointer on a location that you want to use as a destination. To select a destination using QueMap: 1. Tap the QueMap icon to display the Map. 2. Once you have identified a map item that you want to use as a destination, tap it with the stylus to place the map pointer on that spot. 3. Tap the QueRoutes icon on the status bar to display the QueRoutes dialog box. 4. Tap the Route To item at the top of the dialog box. The name displayed depends on the item selected. 5. The Que Map application is displayed and a "Calculating Route" animated graphic replaces the satellite graphic at the center of the status bar. When the satellite graphic returns, the route is "active". 6. Follow the voice prompts and turn preview pages to navigate to your destination. "Route To Point" for a destination chosen from the Map. Route to a point on the Map QueRoutes when a route is active 33 iQue 3600 GPS Applications Using QueRoutes Address List Using the Address Book to Select a Destination You can create a route to any address in the Address Book that has a set location. To select a destination using the Address Book: 1. Tap the Address Book icon to display the address list. 2. Tap the desired Address Book record to display the "Address View". 3. Tap the QueRoutes icon on the status bar to display the QueRoutes dialog box. 4. Tap the Route To item at the top of the dialog box. The name displayed depends on the item selected. 5. The QueMap application is displayed and a "Calculating Route" animated graphic replaces the satellite graphic at the center of the status bar. When the satellite graphic returns, the route is "active". 6. Follow the voice prompts and turn preview pages to navigate to your destination. Address View Page QueRoutes Icons QueRoutes Dialog 7. To view the list of Turns while navigating a route, press the Que Hard button. To view the preview for each turn, tap the turn. Route on Map List of Turns 34 iQue 3600 Using the Date Book to Select a Destination GPS Applications Using QueRoutes Date Book item with location attached You can create a route to any item in the Date Book that has an attached location (indicated by the marker flag to its right). To select a destination using the Date Book: 1. Display the Date Book. 2. Tap on the desired event to be used as a destination. 3. Follow Steps 3 though 6 on the previous page of this guide. Recalculating a Route You can at any time, recalculate the route to the current destination (For example, if you have deviated from the original route). To recalculate a route: 1. Tap the QueRoutes icon to display the QueRoutes dialog box. 2. Tap the Recalculate icon to recalculate the active route. Drop-down Que options menu for attaching or removing a location or routing to it. Using a Detour To avoid an area of traffic congestion or other obstacles on a route, you can use the "Detour" option to alter the route to avoid the roads used in the current route for a specific distance. To use the "Detour" option: 1. Tap the QueRoutes icon. 2. Tap the Detour option. 3. Tap the desired distance to avoid roads used in the current route. 4. To cancel a Detour, tap the QueRoutes icon to display the QueRoutes dialog box, then tap the Cancel Detour icon. Detour Distance Options 35 iQue 3600 GPS Applications Using QueRoutes Stopping and Resuming Route Navigation You can stop navigating a route at any time. To Stop or Resume Navigating a Route: 1. Tap the Route icon to display the Routes dialog box. 2. Tap the Stop Navigation icon to remove the route overlay from the Map Page. This also stops voice prompts and turn preview pages. Start navigating again by tapping the Resume Navigation icon from the QueRoutes dialog box. Route Options Menu when a Route has been stopped before completion Customizing a Route You are not limited to using a newly created route as is, you can modify it to meet your own requirements. To alter a route to include various points on the way, you can use "Edit Vias" to place them. To add or change route "Vias": 1. While a route is active, tap the Route icon to display the QueRoutes dialog box. 2. Tap the Edit Vias icon to display the Edit Vias page. 3. Select the method of adding a via point from the two options shown at the bottom of the page. "From Find" displays the QueFind application. "From Map" displays the QueMap application. 4. Use the same method to select a via point as you would a destination. The selected location now becomes a point along your current route. Via Points List and Options Menu 5. You can move the selected via point anywhere in the list by tapping the Up/Down arrows. The "Determine Best Order" option will arrange the vias in the most efficient order for routing. 36 iQue 3600 Saving a Route GPS Applications Using QueRoutes Once you have created a route to a destination, while it is still active, you can save it to the "Saved Routes" list for re-use at a later date. To save a route: 1. With a route active, tap the Route icon to display the QueRoutes dialog box. 2. Tap the Saved Routes icon to display the Saved Routes List. 3. Tap the Save Active button at the bottom of the page. 4. A "Save Active Route" dialog box displays. Rename the route if desired and then tap OK to save to the Saved Routes List. 5. To view details about any saved route on the list, tap the route name on the list to display the "Saved Route Details" dialog box. 6. Tap OK to close, Activate to begin navigation on that route, or Delete to remove it from the Saved Routes List. Saved Routes List When you select a Saved Route to navigate, the route will be recalculated beginning from your current location. Saved Routes List Saved Route Details 37 iQue 3600 GPS Applications Using QueRoutes Route and Guidance Preferences You can control the way aroute is calculated and select the type of route guidance prompts. Selected preferences, are used for all routes. To set routing preferences: 1. Tap the Route icon to display the QueRoutes dialog box. 2. Tap the Route Preferences icon to display Routing preferences. 3. Tap the icon beneath the "Route Preference" option to display and select from three options. The "Off Road" option will generate a straight line to your destination, not following roads. 4. Tap the icon beneath the "Calculate Routes For:" option to display and select from a list of transportation options. 5. Tap the box next to the "Avoid" options to toggle a check mark and active that option. Routing Preferences To set guidance preferences: 1. Tap the Route icon to display the QueRoutes dialog box. 2. Tap the Route Preferences icon to display the Que Preferences page. Tap the icon preceding the Routing option to display the list of other options. Select Guidance. 3. Tap the icon beneath the "Off-Route Recalculation" option to display and select from four options for recalculation notification. 4. Tap the icon beneath the "Turn Preview" option to display and select from a list of methods for turn notification. 5. Tap the icon beneath "Voice Prompt" to select voice guidance. Guidance Preferences 6. Toggle the Attention Tone box for indication of route changes. 38 iQue 3600 Using Routing Voice Prompts GPS Applications Using QueRoutes Once you have created a route to a destination you can begin navigation. In addition to a graphic in the QueMap application and "pop-up" turn displays you will be given voice prompts prior to turns and points on your route. To adjust voice prompt volume: While navigating a route, you may need to adjust the volume to compensate for road noise, etc. If you're using the Auto Navigation Kit with remote speaker: 1. Adjust the volume as desired by turning the Volume Control located on the side of the Remote Speaker. If you're using the internal speaker of the iQue handheld: 1. Tap the Volume icon Volume Control Page. at the bottom of the display to open the Volume Adjustment Page 2. Use the stylus to adjust the Guidance volume slider to a level appropriate for the noise environment. 3. Tap OK when completed. 39 iQue 3600 GPS Applications Using QueTurns Using QueTurns QueTurns is an application that can show you a list of turn-byturn directions to a destination. The application is active only when a route is active. Use QueTurns to: · View turns on a route in order. · View the Turn Preview for an individual turn. To open the QueTurns application: 1. Tap the Applications Launcher icon to display the QueTurns icon, then tap the QueTurns icon to display the Turns Page. Or, press the Que Hard Button when a route is active. 2. If you are actively navigating a route, a list of turns, in order, will be displayed. Each turn entry provides a direction arrow showing the direction you will turn and the distance to that turn, plus written instructions. The time to the next turn is displayed at the top right of each turn entry and the time of day which you will reach that turn is displayed at the lower right of each turn. 3. Tap a Turn on the list to display it on the Turn Preview Page. Turns List Turn Preview Page 40