professional dual deck CD player Professioneller Doppel-CD-Player Reproductor Doble de CD Profesional Double Lectuer CD Professionnel OPERATIONS MANUAL BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D'INSTRUCTIONS MULTI LANGUAGE INSTRUCTIONS ENGLISH...........................................................................................................................................................................................................................................................................PAGE 4 DEUTSCH............................................................................................................................................................................................................................................................................PAGE 6 ESPAÑOL......................................................................................................................................................................................................................................................................................................................................................................PAGE 8 FRANCAIS....................................................................................................................................................................................................................................................................................................................................................................PAGE 10 PLEASE READ BEFORE USING APPLIANCE, IMPORTANT WARNING & SAFETY INSTRUCTIONS! CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN! CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS: Do not use attachments not recommended by the product manuacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. CART: A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. See Figure A. VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. GROUNDING OR POLARIZATION: · If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. · If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure B. LIGHTENING: For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightening and power-line surges. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · When the power-supply cord or plug is damaged. · If liquid has been spilled, or objects have fallen into the product. · If the product has been exposed to rain or water. · If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. · If the product has been dropped or damaged in any way. · When the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. (2) OPEN / CLOSE OPEN / CLOSE SEAMLESS LOOP SEAMLESS LOOP (3) INTRODUCTION: Congratulations on purchasing the Gemini CD-200 Dual CD Player. This state of the art 2U professional CD player is backed by a 3 year warranty, excluding lasers. One year warranty is included for CD lasers. Prior to use, we suggest that you carefully read all the instructions. 2. Plug one end of a set of the included RCA cable connectors into each of the LINE OUTPUT JACKS (3) on the left and right of the main unit's rear panel. 3. Plug the other end of the RCA connectors into any available line level input jacks on your mixer. If you are connecting the CD-200 through a receiver, you can plug the RCA connectors into the CD or AUX INPUT JACKS on your receiver. If there are no CD or AUX INPUTS, use any line level (not phono) inputs. FEATURES: - Audio CD, CD-R compatible - Anti-shock using RAM buffer memory - Instant-start & cue with preview - Single auto-cue/continuous play modes - Seamless loop per side with reloop - Pitch bend via jog wheel or buttons - Three mode time selection - Frame accurate search - Large blue backlit LCD display - Dual mode jog wheels for search or pitch bend - Pitch control with range of +/- 12% - Pitch bend buttons - +10 track button for quick navigation - Fully programmable with repeat function FUNCTION DESCRIPTIONS: 1. POWER: After making sure that the VOLTAGE SELECTOR SWITCH (1), found on the rear panel of the main unit, is properly set, plug the CD-200 POWER CORD (2) in and press the POWER (5) button. The unit will turn ON. Pushing the POWER button (5) a second time will turn the unit OFF. 2. DISC TRAY: The DISC TRAY (7) is where the CD is held during loading, unloading and playback. Pressing the OPEN/CLOSE (6) button, will open or close the tray. The DISC TRAY (7) holds both 12 cm and 8 cm CDs. Please note, if the CD-200 is in play mode, the tray will not open. NOTE: DO NOT FORCE THE DISC TRAY TO CLOSE, EXCESSIVE FORCE WILL DAMAGE THE CD-MECHANISM, USE THE OPEN/CLOSE (6) BUTTONS ONLY. SAFETY CERTIFICATIONS: Laser Diode Properties Material: Ga - Al - As Wavelength: 755 - 815 nm (25° C) Laser Output: Continuous Wave, max. 0.5 mW 3. OPEN/CLOSE BUTTON: Press OPEN/CLOSE (6) to load or remove a CD from the DISC TRAY. 4. DISPLAY: The DISPLAY (11) shows the track number, pitch value, pitch bend, single, continue (for continuous play), play/pause modes, fast forward/reverse modes, loop mode, reloop mode, PGM, repeat modes, the playback display bar, and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track. Time is measured in minutes, seconds and frames. The PLAYBACK DISPLAY BAR, located at the top of the DISPLAY (11), displays the elapsed and remaining time for each track at the very top of the display. The display flashes slowly when the track has 15 seconds remaining and pulses rapidly when playing time is down to 5 seconds. 5. PLAY/PAUSE: Each press of the PLAY/PAUSE BUTTON (20) causes the operation to change from PLAY to PAUSE or from PAUSE back to PLAY. The green PLAY/PAUSE LED remains lit when in PLAY mode, while it blinks in PAUSE mode. 6. STOP: Use the STOP (9) button to end play. This button will also erase any CUE and LOOP settings. 7. CUE: While the unit is playing and after the cue point has been programmed, pressing CUE (21) will cause the CD player to enter the PAUSE mode (green PLAY/PAUSE LED blinks) at the programmed cue point (the CUE LED glows blue). Holding down the CUE (21) button changes the function to preview and starts the CD from the programmed CUE point. Releasin ...