What would you like to do ? -------------------------- Help us find the most requested user's guides Upload your
user manual Search for a user manual Register Login and access your manuals Reset your password

	Browse all user guides
	The GIGAFAST EZ800-S product forum
	Upload your user manual
	Sign-up Log in
	Help us find the most requested user's guides
	Include the add-on to download manuals from your site, forum or blog
	Frequently Asked Questions
	Contact Diplodocs team
ALL GUIDES BY CATEGORY Domestic Appliance TV & Audio Car & Motorcycle Phone Computer Camera & Video Music Sport Gardening & Housekeeping Video Game & Software Jewelry & Watch Baby & Toys Hygiene & Health Other

EZ-800S Mini 8 Port Switch User Manual Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. Copyright© 2004, GigaFast Inc., All Right Reserved FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures are necessary to correct the interference. CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential protection requirements of the European Council Directive 89/336/EEC on the approximation of the laws of the member states relation to electromagnetic compatibility. Table of Content: Chapter 1 Introduction Features Package Content Wire Diagram Chapter 2 Quick Install Chapter 3 Frequently Asked Questions (FAQ) Appendix A Spec. Sheet Chapter 1 Introduction: Congratulations on the purchase of this EZ-800 Switch. The EZ-800s is affordable and small yet great for business and home uses. Plug & Play is important these days. People are often confused about setting up their home or business network so they rather have a unit that sets everything up for them. Just plug the Ethernet cables from a source into the ports on the EZ-800s will automatically obtain the IP address for you. There is no need to install any software or no setup required. Every LAN port on the EZ-800s has an `AutoUplink' ability which means you can connect your existing router into any of the five ports on the EZ-800s and it will connect and establish the connection automatically. As simple as 1-2-3, the EZ-800s is the best solution whether if you want to setup a LAN party or expand your existing home/business network so you can have more computers linked together. Please read farther down for more information on this great unit and thank you for choosing GigaFast. Features: · · · · Eight auto-sensing 10/100 Mbps Ethernet ports, using Category 5 (Cat5) unshielded twisted pair (UTP) cable IEEE 802.3x Standard Compliant Automatic address learning function to build the packet forwarding information table Auto-sensing full-duplex or half-duplex mode of operation, plug and play installation with no software configuration required · · · · Wire-speed filtering to direct traffic to the appropriate port without speed reduction Front panel LED's provide network traffic status and data transmission speed indicators Five RJ-45 ports on the rear panel, reducing desktop cable clutter Auto-Uplink function simplifies network extension and allows the switch and allows the switch to connect to another switch or hub using a straightthrough cable · · · Plastic housing with choice of wall mounting slots or rubber feet Compliance with the Class B EMI standard to prevent interference with home and business equipment 3-Year Warranty Package Content: · · · · · One 8-Port Network Switch One AC/DC Power Adapter One Warranty Card Four Rubber Feet Wall Screws Wire Diagram: Sample Picture of the EZ-800s Front Back *Note* Products, manual, information may be changed without notification. Please view our website for further changes and information. www.gigafast.com Chapter 2 Quick Install: 1. Install a 10/100Mbps (10/100Base-TX) network adapter card into every computer you want to attach to the network. Make sure you install the Network adaptor drivers in accordance with the manufacturers' directions. 2. Prepare the twisted-pair cables with RJ-45 plugs (Ethernet adapters) on each end. Use Category 5/5e cable for all connections. Make sure the cable length is less than or equal to no more than 100 meters (328 feet). 3. Attach one end of the cable to the RJ-45 port of the computer's network adapter card and the other end to any available port of the 8-port Network Switch. 4. Locate a suitably switched 120volt AC power outlet to plug in the supplied power pack. 5. Insert the power pack into the power outlet. 6. Connect the cable attached to the power pack adapter to the power inlet on the rear panel of the switch. *Note* If you're trying to expand your home/business network with the EZ800s into a router, simply have an Ethernet cable connected in between of the EZ-800s and the router you have. Any port will work because of the auto-uplink function on the switch. Aftermath: After you have successfully installed the EZ-800s, check the lights in the front and see if they are operating. For each Ethernet cable you insert into the port on the switch and the other end, the link light in the front will light up. If you experience problems with this product please read our FAQ guide or contact our technical support line. E-Mail: techsupp@gigafast.com Website: www.gigafast.com Thank you for choosing GigaFast Chapter 3 Frequently Asked Questions (FAQ): Q: What is the dimension on the EZ-800s? A: L: 155mm x W: 95mm x H: 25mm Q: What is the operating temperature on the EZ-800s? A: Every product we have is 0 to 40 degree Celsius Q: Can I use the EZ-800s to share the internet connection with other computers within my network? A: The answer is yes and no. The EZ-800s allows only one IP to be used at a time. If you want to share one IP with multiple computers then a router is needed. EZ-800s allows you to do file and sharing, LAN (Local Area Network) gaming etc. For example: If you have more than one IP address, then it is possible to use the EZ-800s to share the internet connection. To do this: (For most Microsoft Windows based Operating System) 1. Make sure you set up the dedicated IP address from your ISP under `TCP/IP Internet Protocol' under your Windows Operating System 2. By default the `automatically obtain an IP address' is bubbled in. Bubble `specify an IP addresses' and insert the dedicated IP address. 3. Specify the Mask address and click on `apply' 4. Please ensure that you do a ping test to make sure the switch is communicating with your ISP/computers on the network. (For MAC based Operating System) 1. Under `System Preference' there should be a `Network', click on it 2. Go to `Built in Ethernet' and that is where you set up your static internet protocols Q: What is the voltage and power consumption on the EZ-800s? A: The voltage on the EZ-800s: 9V 1A The power consumption on the EZ-800s: 1.5w Q: I have plugged in everything that is required on the EZ-800s and have checked the settings, but still can't get a connection through the switch, what do I do? A: Try to do a power-cycle on the EZ-800s and see if that makes any difference. To do a power-cycle: 1. Unplug the power off the switch and leave it for few minutes 2. Plug back in the power after and wait for a few seconds before operating Q: I plugged in my Ethernet cable into one of the ports on the EZ800s and the Link light flashes once every second or so. A: There are several situations might occur when the Link light on that particular port is flashing. 1. Your Ethernet cable might be defective 2. The TX/Duplex rate on the network cards are different from each other 3. Static IP addresses weren't set on the computers that is within the network Q: I have set up my switch with static IP's and all the lights seem to be okay, but I can't do file sharing with my computers that are plugged into the EZ-800s A: Make sure you have same `Work Group' names on each computer. To change your `Work Group' name: (For most Windows based Operating System) 1. Go to: Start > Settings > Control Panel and click on `System' 2. You should then see several tabs on one dialog. One of those tabs will allow you to change the workgroup name on that particular computer 3. Be certain that all the computers have the same workgroup name Q: Does the EZ-800s have the `auto uplink' ability? If so, which port? A: Our EZ-800s all have auto uplink and any port supports it. Q: Does the EZ-800s have a user interface like a router? A: No, the EZ-800s does not have a user interface because there is no need for a user to configure an EZ-800s to have a LAN/WAN based connection. All the changes should be applied under the Operating System itself. Q: I have a router and the EZ-800s can I expand my network with those two devices? A: Your router should have an uplink port somewhere. Connect that port with an Ethernet cable and into a port on the EZ-800s and that will expand your network Q: I have an older Ethernet card and upon installation the link light on the EZ-800s flashes every second or so, what is wrong? A: It indicates that your network card is running 100mb Full Duplex. Change the TX rate to 10mb Half Duplex and restart the computer to take effect. Q: Is a cross-over cable needed to connect the EZ-800s to another hub or some type of device? A: A cross-over cable is not needed due to the auto-uplink ability on the EZ-800s Q: Is there a way to make my internet connection faster with the EZ800s? A: Unfortunately a switch/router does not change the speed/bandwidth of your internet connection from your ISP. It depends on the ISP that serves your connection in your area. Q: My EZ-800s gets really hot and often drops my connection A: Put the EZ-800s somewhere that has more air flow and see if that solves the problem. If not, then the switch might be defective. If that is the case, please call our tech support line or e-mail us for further assistance. Appendix A - Switch Specifications Sheet: Standard IEEE802.3 10Base-T Ethernet IEEE 802.3u & 802.3x 100 Base-TX Fast Ethernet Eight 10BASE-T / 100BASE-TX N-Way ports Ethernet: 10Mbps (half duplex) 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex) 200Mbps (full duplex) 10 BASE-T: Cat.3, 4 or 5 UTP Cables (100-ohm impedance) 100 BASE-TX: Cat. 5 UTP Cables (100ohm impedance) Star Power 100Mbps/LINK Store and forward Up to 8K 14,880 pps / 10 BASE-T 148,800 pps / 100 BASE-T 2 Mbs Pause frame (Full-duplex) Back-pressure (Half-duplex) Supports both half-duplex and full-duplex mode External power adapter, DC 9V, 1000mA 147mm x 92mm x 22mm (L x W x H) 0 ~ 40 °C 5% to 90% Iron FCC Class B, CE Mark 3 years Network Interface Data Transfer Rate Network Cables Topology LED Indicators Per Device Per Port Transmission Method MAC address table Filter/Forward Buffer Memory Flow control Duplex mode Power Supply Dimensions Temperature Humidity Housing EMI Warranty