2004 GMC Sierra Denali, Yukon Denali/Yukon Denali XL Navigation System M Overview ........................................................ Overview .................................................. Features and Controls ..................................... Features and Controls ................................ 1-1 1-2 2-1 2-2 Navigation Audio System ................................ 3-1 Navigation Audio System ............................ 3-2 ................................................................ 1 Index GENERAL MOTORS, GM and the GM Emblem, GMC, the GMC Emblem are registered trademarks and the names Sierra Denali, Yukon Denali/Yukon XL Denali are trademarks of General Motors Corporation. The information in this manual supplements the owner manual. This manual includes the latest information available at the time it was printed. We reserve the right to make changes in the product after that time without notice. Please keep this manual with the owner manual in your vehicle, so it will be there if you ever need it while you are on the road. If you sell your vehicle, leave this manual and the owner manual with the vehicle. Litho in U.S.A. Part No. 15115116 A First Edition ii © Copyright General Motors Corporation 06/23/03 All Rights Reserved Section 1 Overview .........................................................1-2 Introduction ...................................................1-2 Screen Setup .................................................1-4 Overview 1-1 Overview Introduction 1-2 A. Power/Volume Knob. See Navigation System Screen on page 2-4. B. NAV RPT (Navigation Repeat) Key. See Navigation System Screen on page 2-4. C. NAV (Navigation) Key. See Navigation System Screen on page 2-4. D. BAND Key. See "Playing the Radio" under Navigation Audio System on page 3-2. E. SEEK Key. See "Finding a Station" under Navigation Audio System on page 3-2. F. CD Key. See "Playing CDs" under Navigation Audio System on page 3-2. G. Audio Key. See "Audio Screen" under Navigation Audio System on page 3-2. H. CONFIG (Configuration) Key. See Screen Setup on page 1-4. I. Navigation Joystick. See "Navigation Joystick" following in this section. J. DVD/CD Eject Button. See "Playing CDs" under Navigation Audio System on page 3-2. K. Navigation Screen. See Screen Setup on page 1-4 and Navigation System Screen on page 2-4. L. DVD/CD Loading Slot M. Map Key. See "Hard Keys" under Using the Navigation System on page 2-2. N. DEST (Destination) Key. See "Hard Keys" under Using the Navigation System on page 2-2. O. Menu Key. See "Hard Keys" under Using the Navigation System on page 2-2. P. Zoom In Key. See "Hard Keys" under Using the Navigation System on page 2-2. Q. Zoom Out Key. See "Hard Keys" under Using the Navigation System on page 2-2. R. Back Key. See "Hard Keys" under Using the Navigation System on page 2-2. 1-3 Before you begin to operate the navigation system, read this manual thoroughly to become familiar with it and to understand how the system works. The navigation system allows you to do the following: · Plan a route with provided turn-by-turn route and map guidance with voice prompts. · Select a destination using various methods and choices. · Receive broadcast announcements on traffic and emergency alert communications. The information in the system may not always be complete. Road conditions such as prohibited turns, detours, and construction zones, change frequently. It is important to consider whether you can follow the directions given by the system for the current conditions. Use of the navigation system may be restricted in some U.S. states and Canadian provinces. Check with your state/provincial motor vehicle agency. Screen Setup CONFIG (Configuration) Key: Press the CONFIG key located to the left of the navigation screen, to access the Setup menu. The Setup menu allows you to adjust such things as screen color, appearance, and language of the display for the navigation system. See "Hard Keys" under Using the Navigation System on page 2-2 for more information on hard key functions. Navigation Joystick The navigation joystick, located on the bottom left corner of the navigation system, is used to make selections in the navigation system. See the navigation system overview shown previously for more information on location. Move the joystick to the left, right, up, down, or diagonally to move around the screens, and press the center of the joystick to enter a selection. 1-4 Contrast/Brightness To adjust the contrast or brightness of the navigation screen, choose the desired option by selecting it with the joystick. Use the joystick to raise or lower the contrast or brightness to the desired level. You will see the screen change as you adjust the contrast or brightness. If your vehicle is equipped with a Driver Information Center (DIC), the navigation system will use the language selected through the vehicle's DIC. If you wish to change the language, the map DVD must be inserted. Then, do the following: 1. Press the Language key under the Setup Menu. A caution will display. 2. Using the joystick, scroll to the desired language and press the joystick to select it. 3. Select NEXT to change the display back to the map screen. If the language is changed from English, the menu screens will not match word-for-word as they appear in this manual. Every 50 ignition cycles a language screen will automatically appear prompting you to choose a language. Select a language, then press NEXT. Screen Color When the headlamp switch is turned off, the navigation screen will change to a lighter background and change colors, for better viewing in the daytime. At night, the screen will go to a darker background. You can select Auto for automatic adjustment. You can also select day or night mode regardless of the lighting conditions. The Day setting leaves the system in the day mode. The Night setting leaves the system in the night mode. Beep With this feature On, a beep will sound every time a key is pressed on the navigation system. Choose Off if you do not want to hear a beep whenever a key is pressed. Display Off To turn the navigation screen off, press the Disp. OFF key. To turn the screen back on, press any hard key to the left of the navigation screen. Language Your vehicle has been set for the English language, but you may also select French for all instructional text and voice prompts. However, names on the location map when using the navigation functions will not change. 1-5 Voice Volume To adjust the volume of the voice prompts you receive from the system, do the following: 1. Press the menu key. 2. Select Voice Volume. 3. Use the joystick to raise or lower the volume. The voice prompt will come on with each adjustment to give you an idea of the volume at each level. 4. Once you have reached the desired volume level, press the back key to return to the previous screen. With Adaptive voice volume control, the volume of voice prompts will increase automatically once the vehicle exceeds 50 mph (80 km/hr). Select On to activate this feature. If you do not need voice guidance, you may also select Off to turn the prompts off. This system has voice guidance prompts that provide various messages as you approach points where you need to maneuver your vehicle, such as an intersection. 1-6 Adjust Clock To change the hours/minutes on the clock, do the following: 1. Using the joystick, highlight the time, and press the joystick to select it. 2. Move the joystick up or down to adjust the hour. 3. Once the desired hour is reached, move the joystick to the right to highlight the minutes. 4. Move the joystick up or down to adjust the minutes. 5. When the desired minutes have been reached, press OK to save the change, or select Enter to adjust other time options before you press OK to save. 12Hr/24Hr: This feature allows you to choose whether the time is displayed in standard or military time. Using the joystick, choose 12Hr for standard time, or 24Hr for military time. Auto GPS Update: With this feature ON, the navigation system time will be set to match the current GPS time. The time will be updated with the GPS time when the ignition is turned to ACC or ON. Using the joystick, you may also choose OFF to turn this feature off. To adjust the time displayed at the lower right corner of the navigation screen, as well as other time options, you must first reach the Adjust Clock screen. To get to the Adjust Clock screen, do the following: 1. Press the CONFIG key to access the Setup menu. 2. Select the Clock option. 1-7 Daylight Savings: With this feature ON, the navigation system will automatically adjust the time for Daylight Savings. Using the joystick, you may also choose OFF to turn this feature off. Time Zone: This feature allows you to choose from four different time zones: P.S.T. (Pacific), M.S.T. (Mountain), C.S.T. (Central) and E.S.T. (Eastern). Use the joystick to choose the desired zone. Remember that you must press OK after making the desired adjustments to any of the time options. This allows your changes to be saved and will return you to the Setup menu. If you hit the back key without pressing OK, you will return to the Setup menu, but none of your changes will be saved. English/Metric Units This option allows you to select either English or metric measurements to appear for distances on the map. If your vehicle is equipped with a Driver Information Center (DIC), the navigation system will use the metric measurement selected through the vehicle's DIC. To change between English and metric measurements, do the following: 1. Press the menu key. 2. Using the joystick, select Nav Setup. 3. Use the joystick to choose the measurement option you desire. Choose miles to display measurements in English, or km (kilometers) to display metric measurements. 4. Press the back key to return to the previous screen. 5. To return to the main navigation screen, or to see the map, press the NAV or map keys. See "Nav (Navigation) Setup" under Navigation Menu on page 2-7 for more information. 1-8 Section 2 Features and Controls Global Positioning System (GPS) ....................2-29 Vehicle Positioning ........................................2-30 Problems with Route Guidance .......................2-31 If the System Needs Service ..........................2-32 Ordering Map DVDs ......................................2-32 Database Coverage Explanations ....................2-32 Features and Controls ......................................2-2 Using the Navigation System ...........................2-2 Navigation System Screen ...............................2-4 Maps ............................................................2-5 Symbols ........................................................2-6 Navigation Menu ............................................2-7 2-1 Features and Controls Using the Navigation System This section presents basic information you will need to know to operate the navigation system. The main navigation menu displays a number of options which offer information on a variety of topics. See Navigation Menu on page 2-7 for more information. Use the keys located on each side of the navigation screen, and the joystick located on the bottom left corner of the navigation system, to operate the system. See the navigation system overview under Introduction on page 1-2 for more information on location. Use the navigation joystick to move left, right, up, down or diagonally on the screen. Press the center of the joystick to enter a selection. Once the vehicle is moving, various functions will be disabled to reduce driver distractions. Hard Keys The following hard keys are located to the left of the navigation screen: · · · · · · · · Z (Eject) NAV RPT SEEK NAV BAND B (CD) e (Audio) CONFIG (Configure) The function of each of these keys will be explained in this manual. 2-2 The system also has the following reconfigureable soft keys located to the right of the navigation screen. They have hard key labels for easier understanding while in navigation mode. These six keys can also change functions for different modes of the system. Alpha-Numeric Keypad Letters of the alphabet, symbols, punctuation, and numbers, when available to you, will be displayed on the navigation screen as an alpha or numeric keypad. The appropriate keypad will automatically be displayed whenever the system needs information from you. The alpha keypad will automatically be displayed when the system needs you to input a street or city name. The numeric keypad will automatically be displayed when the system needs you to input a phone number or house address. To select a character, use the joystick to move across the keypad, and press the center of the joystick to select it. ) (Map): Press the map key to view the map screen showing current vehicle position. DEST (Destination): Press the DEST key to display the Destination menu. See "Destination" under Naviga ...