User manual GOVIDEO D645 - Product Manual

Table of Contents FCC and Safety Information ................... 3 Important Safety Instructions................. 4 Player Overview ....................................... 5 Front View .................................................................5 Rear View ..................................................................5 Remote Control .........................................................6 Inserting Remote Control Batteries ...........................7 Language Setup..................................... 15 On Screen Display (OSD) Language ......................15 Disc Menu Language ..............................................15 Audio Language ......................................................15 Subtitle Language ...................................................15 Screen Setup ......................................... 16 Connections ............................................. 8 Basic TV Connections ...............................................8 Enhanced Video Connections ...................................8 Enhanced Audio Connections ...................................9 TV Type ...................................................................16 Screen Saver ...........................................................16 creen TV System ...............................................................16 Video Output............................................................17 Brightness ...............................................................17 Contrast ...................................................................17 DVD Playback ........................................ 10 Audio Setup ........................................... 18 Custom Setup ........................................ 19 Before You Begin... ..................................................10 Basic DVD Playback ...............................................10 Stop .........................................................................10 Pause ......................................................................10 Forward/Reverse Scan ............................................10 Skip Next/Previous ..................................................10 Repeat .....................................................................10 Display .....................................................................11 Audio .......................................................................11 Subtitles ...................................................................11 Angle ......................................................................11 Mute ........................................................................11 Title .........................................................................11 Disc Menu ...............................................................11 A-B Repeat ..............................................................11 Digital Audio Output .................................................18 Parental Control ......................................................19 Change Password ...................................................19 Angle Mark .............................................................20 Restore Defaults ......................................................20 Troubleshooting .................................... 21 Disc Handling & Maintenance .............. 22 Limited Warranty ................................... 23 Included Accessories The following items are included with your DVD player: · Remote Control · AAA Batteries (2) · Audio/Video Cable · User's Guide · Quick Reference Guide · Product Registration Card Other Disc Playback .............................. 12 Playing Audio CDs ...................................................12 Playing Kodak Picture CDs ....................................13 Playing JPEG Picture CDs .....................................13 Playing MP3 CDs ....................................................14 Playing CDs with MP3 and JPEG files ....................14 ©2004 GoVideo. All rights reserved. Printed in China. "Dolby", "Pro Logic", and the double D symbol are trademarks of Dolby Laboratories. The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission. All other brand and product names are trademarks or registered trademarks of their respective companies. GoVideo shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the information contained herein, even if GoVideo has been advised of the possibility of such damages. This document is intended for informational and instructional purposes only. GoVideo reserves the right to make changes in the specifications and other information contained in this document without prior notification. GoVideo disclaims any obligation to update the information contained herein. 2 FCC and Safety Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Region Codes Macrovision Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and disc can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. There are 6 regions (also called "locals"). Each DVD player and disc will be played in one region ONLY. 1 Canada, U.S., U.S. Territories 2 Japan, Europe, South Africa, Middle East 3 Southeast Asia, East Asia (including Hong Kong) 4 Australia, New Zealand, Pacific Islands, Central 5 Former Soviet Union, Indian Subcontinent, Africa 6 China (also North Korea, Mongolia) America, Mexico, South America, Caribbean (including Egypt) CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. WARNING LOCATION: INSIDE ON LASER COVERSHIELD. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. For DVD Players with 525p, but not 625p, Progressive Scan output: CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. 3 Important Safety Instructions 1 2 3 4 5 6 7 Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. Follow Instructions - All operating and using instructions should be followed. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture - Do not use this product near water - for example near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization - This product may be equipped with a polarized alternating - current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings - This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up 4 8 9 10 11 12 13 14 15 static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. 16 Lightning - For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 17 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 18 Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19 Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 20 Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21 Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a When the power-supply cord or plug is damaged. b If liquid has been spilled or objects have fallen into the product. c If the product has been exposed to rain or water. d If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e If the product has been dropped or damaged in any way. f When the product exhibits a distinct change in performance-this indicates a need for service. 22 Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 23 Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 24 Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 25 Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Player Overview Front View OPEN/CLOSE PLAY STOP D645 PROGRESSIVE SCAN DVD · CD PLAYER POWER 12 3 4 567 5 OPEN/CLOSE - Opens and closes the disc tray. 1 POWER - Turns the player on and off. 2 IR Sensor - Receives input from the remote control. 6 PLAY/PAUSE - Starts/pauses playback. 3 Front Panel Display - Displays the player's status. 7 STOP - Stops playback. 4 Disc Tray - Insert disc here. Rear View 1 Y Pb Pr 2 VIDEO 3 S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT 4 5 6 5 Coaxial Digital Audio Output - Scan Video Output - Connects to a TV equpped with Component Video or Progressive Scan Video inputs. 2 Video Output - Connects to a TV or display device with a Video input. 3 Power Cord - Connects to a standard power outlet. 4 Audio Output - Connects to the audio inputs of a TV, stereo, or analog amplifier. 1 Component Video/Progressive Connects to the coaxial input of a digital amplifier/receiver with a Dolby Digital decoder. 6 S-Video Output - Connects to a TV equipped with an S-Video input. 5 Player Overview Remote Control 0-9 Selects chapters directly; e.g., to select chapter 4, press 4, PLAY. POWER OPEN CLOSE TITLE PBC P. SCAN SEARCH 10+ Select chapters in increments of 10; e.g., to select chapter 24, press 10+, 10+, 4, PLAY. A-B Repeats an audio or video segment between two points (A and B) during playback. ANGLE Displays the same scene from different angles (not available on all DVDs). ARROW KEYS Navigates in on-screen menus. AUDIO Selects among available audio tracks/formats during DVD playback. CLEAR Clears selections from the Program Play menu. 1 4 7 10+ 2 5 8 0 ZOOM 3 6 9 + VOL ­ MUTE CLEAR PROGRAM ANGLE A-B REPEAT AUDIO SUBTITLE FREEZE SLOW DISC MENU SETUP ENTER DISPLAY RETURN DISC MENU Displays the DVD disc menu (if applicable). DISPLAY Displays the current title, chapter, and disc time. Press again to view detailed information about the loaded discs. Press a third time to exit. ENTER Confirms menu settings, passwords, etc. FF Scans forward at 2x, 4x, 8x, 16x, and 32x normal speed. FREEZE Freezes the current image on screen. Playback will continue while this image is displayed. Press FREEZE again to resume normal playback. MUTE Toggles the sound on or off. NEXT Advances to the next chapter or track during playback. OPEN/CLOSE Opens and closes the disc drawer. STOP PLAY PAUSE STEP REW FF PREV NEXT 6 Player Overview PAUSE Pauses playback. Press again, or press PLAY, to resume playback PBC Toggles Playback Control on and off. PBC is used on Video CDs only. PLAY Starts playback. POWER Turns the player on and off. PREV Returns to the previous chapter or track during playback. P.SCAN Switches between Progressive Scan and Interlaced Scan (only applicable when using the Component Video Out connection to your TV). PROGRAM Displays the Program Play menu to set a custom playback order (CD playback only). REPEAT Selects among all available Repeat options (Chapter, Title, Disc, etc.). RETURN Returns to the last menu viewed or exits the menu system. REW Scans backward at 2x, 4x, 8x, 16x, and 32x normal speed. SEARCH Jumps to a specific title, chapter, track or time during playback. SETUP Displays the player's Setup menu. SLOW Plays in slow motion at 1/2x, 1/4x, 1/8x, 1/16x, and 1/32x normal speed. STEP Pauses playback, then steps forward one frame at a time. STOP Stops and holds playback (press PLAY to resume). Press STOP twice to reset playback to the beginning of the disc. SUBTITLE Select among all available subtitle languages during playback. TITLE Displays the DVD title menu, if available. VOL +/Adjust the player's volume. This will not change the settings on your TV or stereo. ZOOM Magnifies the on-screen image at x1, x2, and x4 normal size. Use to move the zoomed area. Inserting Remote Control Batteries 1 2 3 Remove the battery cover from the back of the remote control. Insert the supplied batteries, paying attention to the correct polarities (+ and -). Replace the cover. 7 Connections Basic TV Connections You can connect the DVD player to a standard television using the player's Audio and Video jacks. 1 Connect the supplied audio cable (red and white) from the Audio jacks on the rear of the player to the Audio Inputs on your television. 2 Connect the supplied video cable (yellow) from the Video jack on the rear of the player to the Video Input on your television. 3 Set your TV to its appropriate Video input to view the player. DVD Player Y Pb Pr VIDEO S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT White Red Yellow AUDIO IN VIDEO IN TV ayer Pb Enhanced Video Connections For improved picture quality, you can connect the DVD player to a TV equipped with S-Video, Component Video, or Progressive Scan inputs. These connections require special S-Video or Component Video cables (not included). For audio, choose one of the Enhanced Audio Connections shown on page 9. Pr VIDEO S-VIDEO COAXIAL VIDEO OUT DVD Player DVD Player Y Pb Pr VIDEO Y Pb Pr S-VIDEO VIDEO L R AUDIO OUT L R AUDIO OUT COAXIAL VIDEO OUT S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT e Red S-Video Connections 1 Connect an S-Video cable (not included) from Yellow Component Video OR S-Video AUDIO IN the S-Video jack on the rear of the player to the S-Video input on your television. 2 Set the Video Output to S-Video in the player's VIDEO IN Screen Setup menu. 3 Set your TV to its S-Video input to view the player. Coaxial Y Pb Pr S-VIDEO IN from the Component jacks (Y, Pb, Pr) on the rear of the player to the Progressive Scan or Component Video inputs on your television. 2 Set the Video Output to Progressive Scan (PVD Player SCAN) or Component Video (S+Component) in the player's Screen Setup menu. · You can also press the P.SCAN button as a shortcut to switch between Progressive Scan and Interlace Scan modes. 3 Set your TV to its Progressive Scan or Component Video input to view the player. Coaxial Y Pb Pr VIDEO S-VIDEO L R COAXIAL AUDIO OUT VIDEO OUT Progressive Scan/Component Video Connections TV 1 Connect a Component Video cable (not included) COAXIAL IN TV Digital Decoding Receiver DVD Player Y Pb Pr VIDEO S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT White 8 Red TV Connections DVD For enhanced audio quality, you can connect the DVD Player player to a stereo system or digital amplifier/receiver. Y Pb Pr VIDEO TV Enhanced Audio Connections DVD Player Y Pb Pr VIDEO Stereo Receiver Connections 1 Connect the supplied audio cable (red and white) S-VIDEO L R COAXIAL AUDIO OUT VIDEO OUT DVD Player S-VIDEO Y Pb Pr VIDEO L R AUDIO OUT from the Audio R/L jacks on the rear of the player to the left and right Audio Inputs on your stereo or 2-channel analog receiver. 2 Set your stereo to its appropriate input to hear the Coaxial player. COAXIAL VIDEO OUT S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT White White Red Red Yellow COAXIAL IN AUDIO IN AUDIO IN VIDEO IN Digital Decoding Receiver Stereo Receiver TV Digital Receiver Connections 1 Connect a digital coaxial cable (not included) from the Coaxial jack on the rear of the player to the coaxial digital audio input on your digital receiver. 2 Set the Digital Out to SPDIF/PCM (Stereo) or SPDIF/RAW (Digital) in the player's Audio Setup menu, depending on the capabilities of your receiver. 3 Set your receiver to its appropriate input to hear the player. DVD Player Y Pb Pr VIDEO S-VIDEO L R AUDIO OUT COAXIAL VIDEO OUT Coaxial COAXIAL IN Digital Decoding Receiver 9 DVD Playback Before You Begin... · · Turn on your TV and select the appropriate video input. If you connected the player to your audio system, turn on your stereo or audio system and select the appropriate audio input. Skip Next/Previous You can skip to a specific chapter or track during playback. Skipping Ahead Basic DVD Playback 1 Press POWER on. 2 Press OPEN/CLOSE to open the disc tray. 3 Hold the edge of the disc and place it in the tray with the label side up. Press NEXT during playback. · Skips a chapter each time you press the NEXT button. Skipping Back 4 Press OPEN/CLOSE again to close the disc tray. · The DVD player starts playback or opens the DVD disc menu automatically. · Proceed with steps 5 and 6 if a menu is available on the disc. 5 Press or use the number button(s) to select the desired chapter/title. · To select a chapter/title, input the number; e.g., press "1" for chapter 1, "1-0" for chapter 10, etc. 6 Press PLAY. · The player starts playback of the selected item. Press PREV during playback. · If you press the PREV button midway through a chapter, the DVD player returns to the beginning of the chapter. The player then skips a chapter each time you press the PREV button. Repeat Press REPEAT during playback to select from the following options: · Press once to repeat the current Chapter · Press twice to repeat the current Title · Press three times to repeat the current Disc · Press four times to turn repeat Off To return to normal playback Stop · · Press STOP once to stop and hold playback at the current position. Press STOP twice to stop and reset the disc to the beginning. Press REPEAT until "REPEAT Off" appears. · Repeat playback works only with discs for which the elapsed playing time appears on the player's display during playback. · Repeat playback may not work correctly with some DVDs. When not in use... Pause Press PAUSEonce during playback. · The screen is paused. · To return to normal playback, press PLAY. Forward/Reverse Scan Press REW or FF during playback. · Normal playback is resumed when you press PLAY. · The Forward Scan ( x2, x4, etc.) and Reverse Scan ( x2, x4, and etc.) speed changes each time you press the REW/FF buttons. When the DVD player is not in use, remove the disc and press POWER to turn off the player. · The disc continues to rotate while the menu is displayed even after the player has finished playing a particular disc. When no further selections are to be played, be sure to press the STOP button to clear the menu screen. · If the disc is placed in the tray upside down (and it is a single sided disc), the "NO DISC" message will appear. For your reference: · If " " appears when a button is pressed, it means that the corresponding function is not available. The function may not be present on the disc, or the player may need to be in Stop mode to access the function. 10 Special DVD Features Display Press DISPLAY during playback. · Press DISPLAY repeatedly to display the title number, chapter number, and other disc information. Mute To mute the volume on the DVD player. 1 Press MUTE during playback. · To resume normal sound, press MUTE repeatedly until "MUTE OFF" appears on the screen. Stop Displaying Scene Information · Press DISPLAY repeatedly until the information disappears. Title Some DVDs have Title menus, which allow you to choose among multiple titles (usually movies). Audio You can change the audio soundtrack to any language available on the disc. 1 Press TITLE in stop mode · The Title menu appears, if available. 1 Press AUDIO repeatedly until the preferred language is selected. · If the language you want to hear is not selected even after you have pressed the button several times, it may indicate that language is not available on the disc. 2 Press to select the preferred item. 3 Press ENTER. Disc Menu Most DVDs have disc menus, which include special disc features, including audio languages, subtitle languages and more. Subtitles If a disc provides subtitles, you can choose to hide or display them. This operation works only with discs that provide subtitles. 1 Press DISC MENU. · The disc menu appears, if available. 2 Press or use the number button(s) to select the desired item, then pres ENTER. · Menu details vary by disc. 1 Press SUBTITLE during playback. · After you press SUBTITLE once, the first subtitle language on the disc will be displayed. The rest of the subtitles recorded will display in sequence as you press the button. · If no subtitles are recorded, " " will display instead of the language number. 2 Press SUBTITLE repeatedly until the preferred language is selected. · Clear the subtitles by pressing this button repeatedly until "SUBTITLE OFF" appears . · In some cases, the subtitle language may not change immediately to the selected one. · If the preferred subtitle language is not played even even after you have pressed the button several times, it may indicate that the language is not available on the disc. A-B Repeat A-B Repeat allows you to repeat any segment of a DVD or CD. Mark the beginning point (A) and the ending point (B) of the segment you want to review. 1 While playing a DVD or CD, at the place you want the repeat to start, press the A-B button. "Repeat A" will appear on screen. 2 Press A-B again at the end of the segment you want to repeat. The segment will repeat in a continuous loop. 3 Press A-B again to resume normal playback. Angle Some DVD discs contain scenes which were shot simultaneously from multiple angles. Use the ANGLE button to view these alternative scenes. 1 Press ANGLE during playback. 2 Press ANGLE repeatedly until the preferred viewing angle is selected. · Angle will only function on discs where different angles have been recorded. 11 Other Disc Playback Playing Audio CDs Before You Begin... · · Turn on your TV and select the appropriate video input. Turn on your stereo or audio system and select the appropriate audio input (if applicable). Displaying Track Information Press DISPLAY during playback. · Press DISPLAY repeatedly to display the elapsed time, track number, and other information on the screen. Stop Displaying Track Information · Basic Audio CD Playback 1 Press POWER on. 2 Press OPEN/CLOSE to open the disc tray. 3 Hold the edge of the disc and place it in the tray with the label side up. Press DISPLAY repeatedly until the track information disappears. Program Mode 4 Close the disc tray. · Standard CDs start playing automatically. · If the CD has playback control, the CD disc menu will appear. Program mode allows you to create a custom playlist The list will be remembered as long as the CD is in the player. Removing the CD may erase the playlist. 1 Press PROGRAM. 2 Press to access the list of tracks. 3 Press to highlight the first desired track, 5 Press to move to the next position on the play list, and repeat steps 2 and 3. then press ENTER to add it to your play list. Stopping Playback · · Press STOP once to stop and hold playback at the current position. Press STOP twice to stop and reset the disc to the beginning. 6 Press PLAY to play the programmed tracks. To delete a track from the programmed list · Press to choose the track in the playlist, then press CLEAR. Forward/Reverse Scan Press REW or FF during playback. · Normal playback is resumed when you press PLAY. · The Forward Scan ( x2, x4, etc.) and Reverse Scan ( x2, x4, etc.) speed changes each time you press the REW/FF buttons. Skipping Ahead Press NEXT during playback. · Skips a track each time you press the NEXT button. Skipping Back · · Press PREV during playback. If you press the PREV button midway through a track, the DVD player returns to the beginning of the track. The player then skips a track each time you press the PREV button. Pause Press PAUSE once during playback. · Playback is paused. To return to normal playback Press PLAY. 12 Other Disc Playback Playing Kodak Picture CDs You can play Kodak Picture CDs in your DVD player. Playing JPEG Picture CDs You can play JPEG picture CDs in your DVD player. Basic Playback 1 Load a Kodak Picture CD. · After a few seconds, the DVD player starts a slide show of available images. 2 Press DISPLAY to view the current image number and total number of images. 3 Use the number keys to jump to a specific image. · The DVD player will begin the slide show from the selected image. · Press PAUSE to pause the slide show. · Press STOP to stop the slide show and enter Thumbnail mode. · You can rotate/flip images during a slide show, by pressing the keys when the image appears on scren. Basic Playback 1 Load a JPEG Picture CD. · After a few seconds, the DVD player starts a slide show of available images. 2 Press DISPLAY to view the current image number and total number of images. 3 Use the number keys to jump to a specific image. · The DVD player will begin the slide show from the selected image. · Press PAUSE to pause the slide show. · Press STOP to stop the slide show and enter File Manager mode. File Manager Mode Playback Modes There are two play modes for a Kodak Picture CD: · Thumbnail Mode · Rotate Mode File Manager mode allows you to view your images in a directory format. · Press to choose the desired image, then press ENTER to display the image. · Press PREV and NEXT to view the previous or next group of images in the list. Thumbnail Mode Play Mode Thumbnail mode allows you to view thumbnails of up to 20 images at a time. 1 Press STOP to stop the slide show. 2 Press PREV and NEXT to view the previous or next page of thumbnail images. 3 Press to choose the desired image. 4 Press ENTER or PLAY to see the full size image and start the slide show beginning with the selected image. Play mode allows you to view your images in a slide show. · Press PREV and NEXT to view the previous or next image. · Press to rotate the images . · Press PAUSE to pause the slide show. · Press PLAYto resume the slide show. · Press STOP to return to File Manager mode. Rotate Mode You can rotate images or flip them horizontally and vertically before starting a slideshow. 1 Press STOP to access thumbnail mode. 2 Press PREV and NEXT to view the desired 3 Press to choose the desired image. 4 Press ENTER to view the full size image, then page of thumbnail images. press to rotate the image, then press STOP. · The images will remain rotated until you remove the Picture CD. 5 Repeat steps 1-5 for every picture you want to rotate, then select the first thumbnail and press PLAY to start the slideshow. 13 Other Disc Playback Playing MP3 CDs 1 Press POWER on. 2 Press OPEN/CLOSE to open the disc tray. 3 Hold the edge of the MP3 disc and place it in the tray with the label side up. Playing CDs with MP3 and JPEG files The DVD player will play CDs with MP3 and JPEG files. The operations are the same as with standard MP3 and JPEG discs. 4 Press OPEN/CLOSE to close the disc tray. · After a few moments, the first MP3 file in the disc's root directory will start playing automatically. Browsing Directories MP3 discs are often divided into directories (i.e., folders) which are subdivided into MP3 tracks. If your disc contains directories: 1 Press STOP to stop playback. 2 Press to choose the desired directory, 3 Press to choose the desired track, then press ENTER to open it. then press ENTER or PLAY to start playback. · You can also enter a track number directly with the number buttons, then press ENTER to start playback. To stop playback · Press STOP. To skip to the previous/next track. · Press PREV/NEXT during playback. To pause playback · Press PAUSE. To resume playback · Press PLAY. 14 Language Setup On Screen Display (OSD) Language You can select among various languages for the player's on-screen display (OSD). Audio Language You can select your preferred language for DVD audio sound tracks. 1 Press SETUP in Stop mode. 2 Press to select "Language Setup", then press . 1 Press SETUP in Stop mode. 2 Press to select "Language Setup", then press . 3 Press to select "OSD", then press . 4 Press to select your preferred language. Language Setup OSD Menu Audio Subtitle English French Spanish 3 Press to select "Audio", then press . 4 Press to select your preferred language. · Select "Original" if you want the default language to always be played first. Language Setup OSD Menu Audio Subtitle English Chinese Japanese French German 5 Press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 5 Press ENTER. · If the language selected is not recorded on the disc, the DVD player will playback the disc's default language. Disc Menu Language You can select your preferred language for DVD disc menus. Subtitle Language You can select your preferred language for DVD subtitles. 1 Press SETUP in Stop mode. 2 Press to select "Language Setup", then press . 3 Press to select "Menu", then press . 4 Press to select your preferred language. Language Setup OSD Menu Audio Subtitle English Chinese Japanese French German 1 Press SETUP in Stop mode. 2 Press to select "Language Setup", then press . 3 Press to select "Subtitle", then . 4 Press to select your preferred language. 5 Press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 5 Press ENTER. · If the selected language is not available on the disc, the player will select the disc's default language. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 15 Screen Setup TV Type The TV Type feature allows you to set your preferred aspect ratio for DVD movies. Choose from the following: · 4:3 PS (Pan & Scan) - Crops widescreen movies to fit a standard television. · 4:3 LB (Letterbox) - Shows the full width of widescreen movies on a standard television with black bars above and below the picture. · 16:9 - Select if you have a widescreen television. TV System When connecting the DVD player to a TV, you must specify the broadcast system of your television. Choose from the following: · NTSC - The color TV broadcast standard for the USA, Canada, Latin America and Taiwan. · PAL - The color television broadcast standard for Western Europe (except France, where SECAM is the standard), Australia, China, Singapore and Malaysia. · AUTO - Select if you have a multi-system TV that supports both NTSC and PAL. 1 Press SETUP. 2 Press to select "Screen Setup", then press . 3 Press to select "TV Type", then press . 4 Press to select your preferred TV Type setting. Screen Setup TV Type T Screen Saver TV System Video Output Brightness Contrast 4:3 PS 4:3 LB 16:9 1 Press SETUP. 2 Press to select "Screen Setup", then press . 3 Press to select "TV System", then press . 4 Press to select the appropriate TV System setting for your television. Screen Setup TV Type T Screen Saver TV System Video Output Brightness Contrast NTSC P PAL AUTO 5 Press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 5 Press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. Screen Saver You can enable a screen saver that will protect your screen when the player is not in use. 1 Press SETUP. 2 Press to select "Screen Setup", then press . 3 Press to select "Screen Saver", then press . 4 Press to select "On" or "Off", then press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 16 Screen Setup Video Output If you connected the DVD player to your TV using the S-Video or Component Video output, you must specify in the menu system which of these connection types you are using. · Before you select P-SCAN, make sure your TV supports Progressive Scan and that the Y, Pb, and Pr cables are properly connected. · If your screen is distorted after adjusting this setting, press the P.SCAN button on the remote control to switch back to Interlace mode. Brightness You can change the light intensity of DVD playback to "Normal", "Bright", or "Soft". 1 Press SETUP. 2 Press to select "Screen Setup", then press . 3 Press to select "Brightness", then press . 4 Press to select the desired Brightness setting. Screen Setup TV Type T Screen Saver TV System Video Output Brightness Contrast Normal Bright Soft press . 3 Press to select "Video Output", then press . 4 Press to select the appropriate Video Output setting for your television. Screen Setup TV Type T Screen Saver TV System Video Output Brightness Contrast S-Video S+Component P-SCAN 1 Press SETUP. 2 Press to select "Screen Setup", then 5 Press ENTER. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. Contrast · S-Video - Choose when using a standard Composite Video or S-Video connection to your TV. Note: Progressive Scan will NOT work when this setting is selected. · S+Component - Choose when using a standard Composite Video or Component Video connection to your TV. · P-SCAN - Choose when using a Progressive Scan connection to your TV. 5 Press ENTER. · If you selected P-SCAN, you will be prompted to confirm that your TV supports Progressive Scan. Press PLAY to continue, or STOP to cancel. To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. You can increase or decrease the difference between light and dark tones during DVD playback. 1 Press SETUP. 2 Press to select "Screen Setup", then press . 3 Press to select "Contrast", then press . 4 Press to select the desired Contrast setting from -4 (least contrast, may lose detail in dark scenes) to +4 (most contrast, may lose detail in well-lit scenes). Screen Setup TV Type T Screen Saver TV System Video Output Brightness Contrast -3 -2 -1 0 +1 +2 +3