User manual GOVIDEO DP8240 - PRODUCT MANUAL

82-154-00480 Table of Contents FCC and Safety Information ................... 3 Important Safety Instructions................. 4 Player Overview ....................................... 5 Front View .................................................................5 Other Views ...............................................................6 Remote Control .........................................................7 Inserting Remote Control Batteries ...........................7 Other Disc Playback .............................. 16 Playing Audio CDs ...................................................16 Playing Kodak Picture CDs ....................................17 Playing JPEG Picture CDs .....................................18 Playing MP3 CDs ....................................................19 Playing CDs with MP3 and JPEG files ....................19 Language Setup..................................... 20 Quick Start ............................................... 8 Step 1 - Open Top Panel ...........................................8 Step 2 - Connect AC Adapter ....................................8 Step 3 - Connect Headphones (Optional) .................8 Step 4 - Turn on Power .............................................8 Step 5 - Open Disc Cover .........................................8 Step 6 - Insert Disc ....................................................8 Step 7 - Close Disc Cover .........................................8 Step 8 - Play Disc ......................................................8 Battery Pack Overview ..............................................9 Charging the Battery Pack ........................................9 On Screen Display (OSD) Language ......................20 Disc Menu Language ..............................................20 Audio Language [DVD] ............................................21 Subtitle Language [DVD] .........................................21 Screen Setup ......................................... 22 TV Type ...................................................................22 Screen Saver ...........................................................22 TV System ...............................................................23 Video Output............................................................23 Audio Setup ........................................... 24 Custom Setup ........................................ 25 Digital Audio Output [DVD] ......................................24 Parental Control [DVD] ............................................25 Change Password [DVD] ........................................25 Angle Mark [DVD] ...................................................26 Restore Defaults ......................................................26 Connections ........................................... 10 Basic TV Connections .............................................10 Enhanced Video Connections .................................10 Enhanced Audio Connections .................................11 External Device Connections ..................................11 DVD Playback ........................................ 12 Before You Begin... ..................................................12 Basic DVD Playback ...............................................12 Viewing Disc Menus ................................................12 Stopping Playback ...................................................12 Forward/Reverse Scan ............................................13 Skip Next/Previous ..................................................13 Pause ......................................................................13 Repeat .....................................................................13 LCD Setup .............................................. 27 Panel .......................................................................27 Invert .......................................................................27 Color ........................................................................27 Brightness ...............................................................27 Troubleshooting .................................... 28 Disc Handling & Maintenance .............. 29 Parts & Accessories .............................. 30 Limited Warranty ................................... 31 Special DVD Features ........................... 14 Displaying Scene Information ..................................14 Audio .......................................................................14 Subtitles ...................................................................14 Angle ......................................................................15 Mute ........................................................................15 Title ........................................................................15 Disc Menu ...............................................................15 ©2004 GoVideo. All rights reserved. Printed in China. GoVideo is a registered trademark. "Dolby", "Pro Logic", and the double D symbol are trademarks of Dolby Laboratories. The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission. All other brand and product names are trademarks or registered trademarks of their respective companies. GoVideo shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the information contained herein, even if GoVideo has been advised of the possibility of such damages. This document is intended for informational and instructional purposes only. GoVideo reserves the right to make changes in the specifications and other information contained in this document without prior notification. GoVideo disclaims any obligation to update the information contained herein. 2 FCC and Safety Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Region Codes Macrovision Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and disc can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. There are 6 regions (also called "locals"). Each DVD player and disc will be played in one region ONLY. 1 Canada, U.S., U.S. Territories 2 Japan, Europe, South Africa, Middle East 3 Southeast Asia, East Asia (including Hong Kong) 4 Australia, New Zealand, Pacific Islands, Central 5 Former Soviet Union, Indian Subcontinent, Africa 6 China (also North Korea, Mongolia) America, Mexico, South America, Caribbean (including Egypt) CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM. WARNING LOCATION: INSIDE ON LASER COVERSHIELD. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. For DVD Players with 525p, but not 625p, Progressive Scan output: CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. 3 Important Safety Instructions 1 2 3 4 5 6 7 8 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lighting storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way; such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Placement Avoid placing the unit in areas of: · direct sunlight or heating radiators, or closed automobiles · high temperature (over 95°F) or high humidity (over 90%) · significant dust as the internal parts may be seriously damaged. Non-use periods When the unit is not being used, turn it off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. 9 No fingers or other objects inside · · · Touching internal parts of this unit is dangerous, and may cause serious damage to the unit. Do not attempt to disassemble the unit. Do not put any foreign object in the disc tray. Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could occur. 10 Keep away from water 11 12 Keep away from magnets Never bring a magnet or magnetized object near the unit. Stacking · Place the unit in a horizontal position, and do not place anything heavy on it. Condensation 13 14 Moisture may form on the lens in the following conditions: · immediately after a heater has been turned on · in a steamy or very humid room · when the unit is suddenly moved from a cold environment to a warm one If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate. Power cord protection If there is noise interference on the TV while a broadcast is being received To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following: · Hold the plug firmly when connecting or disconnecting the AC power cord. · Keep the AC power cord away from heating appliances. · Never put any heavy object on the AC power cord. · Do not attempt to repair or reconstruct the AC power cord in any way. 4 Depending on the reception condition of the TV, interference may appear on the TV monitor while you watch a TV broadcast and the unit is left on. This is not a malfunction of the unit or the TV. To watch a TV broadcast, turn off the unit. Player Overview Front View 1 15 14 13 12 11 10 9 2 3 4 5 6 78 1 2 3 4 5 6 7 8 LCD Screen Built-in Speakers CLOSE - Press here to close the disc tray. REV /- Scans backward at variable speed during playback. Moves left in menus. OPEN - Opens the disc tray. PREV - Skips to previous chapter/track during playback. STOP /- Stops playback. Moves down in menus. NEXT - Skips to next chapter/track during playback. 9 PLAY/ SELECT - Starts playback. Also makes selections in menus. 10 FF /- Scans backward at variable 11 12 13 14 15 speed during playback. Moves right in menus. PAUSE/ - Pauses playback. Moves up in menus. DISC MENU - Displays the disc menu of a DVD. SETUP - Displays the player's Setup menu. MODE - Switches between S-Video and Progressive Scan modes. LCD - Displays options relating to the display, including Panel, Invert, Color, and Brightness. 5 Player Overview Other Views Front 1 Left Side 2 3 Right Side 4 5 6 7 8 9 10 11 1 IR sensor - Receives input from remote 2 3 4 5 6 7 control. Power indicator - Lights when player is on. DC In Jack - Connects to the supplied AC adapter. POWER Switch - Turns the player on and off. Volume Control - Adjusts the player's volume. Headphone Jacks - Connects to headphones or earphones. Coaxial Digital Audio Output - Connects out to a digital amplifier/receiver with a Dolby Digital or DTS decoder. 8 AV Switch - Changes the Video and Audio jacks to be either Inputs or Outputs. 9 Audio Output/Input - Connects out to a stereo TV or analog amplifier. Also connects in from an external audio device, such as a camcorder or VCR. 10 Video Output/Input - Connects out to a TV or display device. Also connects in from an external video device, such as a camcorder or VCR. 11 S-Video/Progressive Scan Video Output - Connects out to a TV with S-Video or Progressive Scan inputs. 6 Player Overview Remote Control 1 INFO. - Displays current chapter/track information. 2 SETUP/AUTO SEARCH - Displays the player's Setup menu. menus. 1 2 3 4 5 6 7 8 9 Auto Search Info. LCD TV Source Menu Setup Mode Play Sel. Title 1 4 7 2 5 8 3 6 9 1/All 10 11 12 13 14 15 16 17 18 19 3 PAUSE/ - Pauses playback. Moves up in 4 MODE - Switches between S-Video and Progressive Scan modes. 5 REV/- Scans backward at variable speed during playback. Moves left in menus. selections in menus. playback. menus. 6 PLAY/ SELECT - Starts playback. Also makes 7 PREV - Skips to previous chapter/track during 8 STOP/ - Stops playback. Moves down in 9 0-9 - Makes direct selections in menus. 10 MENU/TV SOURCE - Displays the disc menu of a DVD. 0 11 LCD - Displays options relating to the display, 12 SUBTITLE including Panel, Invert, Color, and Brightness. - Selects among available DVD subtitle languages. 13 TITLE - Displays DVD title menu, if available. 14 ANGLE - Selects among available angles during DVD playback. 15 FF/- Scans backward at variable speed during playback. Moves right in menus. 16 AUDIO - Selects among available DVD audio languages. 17 NEXT - Skips to next chapter/track during playback. 18 1/ALL - Selects among several Repeat modes. 19 MUTE - Turns the sound on and off. CR2025 + Inserting Remote Control Batteries 1 Squeeze the release lever and pull the battery tray out of OPEN PUSH the remote control. 2 Insert the supplied CR2025 3V lithium battery with the positive (+) side of the battery facing up. 3 Slide the battery tray back into place. + 7 Quick Start Step 1 - Open Top Panel Lift the top panel and adjust the LCD screen to the desired angle. Step 4 - Turn on Power Slide the POWER button to the ON position to turn on the player. Step 2 - Connect AC Adapter Connect the supplied AC adapter to the DC IN jack on the left side of the portable DVD player. · You can also use the supplied cigarette lighter adapter in place of the AC adapter to supply power to the player. Step 5 - Open Disc Cover Press the OPEN button to open the disc cover. Open Step 6 - Insert Disc Step 3 - Connect Headphones (Optional) You can listen to the built-in speakers, or connect headphones or earphones to the PHONES 1 or 2 jacks on the right side of the player. · To connect the unit to external equipment, such as a TV, stereo, or amplifier, see pages 10-11. Place the disc in the center of the tray with the label side facing up. Gently press the hole in the disc over the spindle in the center of the tray. Step 7 - Close Disc Cover Press down on the disc cover until it snaps shut. · The disc will load automatically. Step 8 - Play Disc Press the PLAY / SELECT button to start playback of the disc. · If a DVD disc menu appears, use the /// keys to select the desired option and press PLAY / SELECT to confirm. 8 Quick Start Battery Pack Overview 1 2 3 4 Charging the Battery Pack While it is Attached to the Player 1 Connect the battery pack to the back of the player as shown. 1 2 3 4 DC In Jack Battery Release Button Battery Charge Indicator Battery Connectors 2 Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC In jack on the right side of the player. Charging the Battery Pack Before using the battery pack, make sure it is fully charged. You can charge the battery pack directly or while it is attached to the portable DVD player. Charging the Battery Pack Directly 1 Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC IN jack on the left side of the battery pack. · You can also use the supplied cigarette lighter adapter in place of the AC adapter to charge the battery. DC In Jack 3 Turn off the player. The battery pack will NOT charge while the portable DVD player is powered on. 4 The battery charge indicator will turn red while the battery is charging. 5 The battery charge indicator will turn green when the battery pack is fully charged. Removing the Battery Pack · Press the Battery Release button on top of the battery pack to remove it. 2 The battery charge indicator will turn red while the battery is charging. 3 The battery charge indicator will turn green when the battery pack is fully charged. · Allow ~3 hours to fully charge the battery. · A fully charged battery permits ~3 hours of playback time. CAUTION · · · · · Use the specified battery pack only. May explode if battery pack is incorrectly replaced or disposed of in fire. Replace only with the same or equivalent type. Do not short circuit. Do not place the battery pack in direct sunlight or in excessively hot places (over 140°F (60°C) such as the dashboard of cars. Use only with the specified power adapter (12VDC, 1.25A). 9 Connections Basic TV Connections You can connect the portable DVD player to a standard television using the player's Audio and Video jacks. 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the Audio jack on the side of the player to the Audio Inputs on your television. 2 Connect the supplied video cable (mini-plug to RCA video) from the Video jack on the side of the player to the Video Input on your television. 3 Slide the AV Out/AV In switch to the AV Out position. 4 Set your TV to its appropriate Video input to view the player. AUDIO IN VIDEO IN Enhanced Video Connections For improved picture quality, you can connect the portable DVD player to a TV equipped with S-Video or Progressive Scan inputs. These connections require special cables with mini-plug adapters (not included). S-Video Connections 1 Connect an S-Video cable with mini-plug adapter OR (not included) from the S-Video jack on the side of the player to the S-Video input on your television. 2 Slide the AV Out/AV In switch to the AV Out position. 3 Set the Video Output to S-Video in the player's Screen Setup menu (see page 23). · You can also press the MODE button as a shortcut to switch between S-Video and Progressive Scan modes. 4 Set your TV to its S-Video input to view the player. Y Pb Pr S-VIDEO IN Progressive Scan/Component Video Connections 1 Connect a Component Video cable with mini- 3 Set the Video Output to P-Scan in the player's plug adapter (not included) from the P.Scan jack on the side of the player to the Progressive Scan/Component Video inputs (Y, Pb, Pr) on your television. 2 Slide the AV Out/AV In switch to the AV Out position. Screen Setup menu (see page 23). · You can also press the MODE button as a shortcut to switch between S-Video and Progressive Scan modes. 4 Set your TV to its Progressive Scan input to view the player. 10 Connections Enhanced Audio Connections For enhanced audio quality, you can connect the portable DVD player to a stereo system or digital amplifier/receiver. Analog Audio Connections 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the Audio Out jack on the side of the player to the left and right Audio Inputs on your stereo or 2-channel analog receiver. 2 Slide the AV Out/AV In switch to the AV Out position. 3 Set your stereo to its appropriate input to hear the player. OR COAXIAL IN AUDIO IN Digital Audio Connections 1 Connect a digital coaxial cable with mini-plug adapter (not included) from the Coaxial jack on the side of the player to the coaxial digital audio input on your digital receiver. 2 Set the Digital Out to SPDIF/PCM (Stereo) or SPDIF/RAW (Digital) in the player's Audio Setup menu (see page 24). 3 Set your receiver to its appropriate input to hear the player. External Device Connections You can connect an external device, such as a VCR, camcorder, or video game, to the portable DVD player. 1 Connect your external device to the audio/video inputs on the side of the portable DVD player: · Video - Requires mini-plug to RCA video cable (included) · Audio - Requires mini-plug to RCA audio cable (included) 2 Slide the AV Out/AV In switch to the AV In position to view your external device. AUDIO OUT VIDEO OUT 11 DVD Playback Before You Begin... Connect the portable DVD player to a power outlet and plug in headphones or listen to the built-in speakers. You can also connect the player to external equipment, such as a TV and/or audio system. If you do this, remember to: · Turn on your TV and select the appropriate video input. · Turn on your stereo or audio system and select the appropriate audio input. · Slide the AV Out/AV In switch to the AV OUT position. Viewing Disc Menus Press DISC MENU. The portable DVD player stops playback, and then displays the menu screen. When the portable DVD player is not in use, remove the disc and press POWER to turn off the player. Then close the display panel. · The disc continues to rotate while the menu is displayed even after the player has finished playing a particular disc. When no further selections are to be played, be sure to press the STOP button to clear the menu screen. · If the disc is placed in the tray upside down (and it is a single sided disc), the "NO DISC" message will appear. When not in use... Basic DVD Playback 1 Press POWER on. 2 Press OPEN to open the disc cover. 3 Hold the edge of the disc and place it in the tray For your reference: · with the label side up. · Press the disk onto the spindle in the center of the tray. 4 Close the disc cover. · The portable DVD player starts playback or opens the DVD disc menu automatically. · Proceed with steps 5 and 6 when a menu is available on the disc. 5 Press /// or use the number button(s) to select the desired chapter/title. · To select a chapter/title, input the number; e.g., press "1" for chapter 1, "10" for chapter 10, etc. 6 Press PLAY/ SELECT. · The player starts playback of the selected item. When " " appears when a button is pressed, it means that the corresponding function is prohibited by the player. Stopping Playback · · Press STOP once to stop and hold playback at the current position. Press STOP twice to stop and reset the disc to the beginning. 12 DVD Playback Forward/Reverse Scan Press REV or FF during playback. · Normal playback is resumed when you press PLAY/ SELECT. · The Forward Scan ( x2, x4, etc.) and Reverse Scan ( x2, x4, and etc.) speed changes each time you press the REV/FF buttons. Repeat Press 1/All repeatedly during playback to select from the following options: · Press once to repeat the current Chapter · Press twice to repeat the current Title · Press three times to repeat the current Disc · Press four times to turn repeat Off Skip Next/Previous You can skip to a specific chapter or track during playback. To return to normal playback Press 1/All until "REPEAT Off" appears. · Repeat playback works only with discs for which the elapsed playing time appears on the player's display during playback. · Repeat playback may not work correctly with some DVDs. Skipping Ahead Press NEXT during playback. · Skips a chapter each time you press the NEXT button. Skipping Back Press PREV during playback. · When you press the PREV button midway through a chapter, the portable DVD player returns to the beginning of the chapter. The player then skips a chapter each time you press the PREV button. Pause Press PAUSEonce during playback. · The screen is paused. · Press PAUSE repeatedly to step through the scene frame by frame. · To return to normal playback, press PLAY/ SELECT. 13 Special DVD Features Displaying Scene Information Press INFO. during playback. · Press INFO. repeatedly to display the title number, chapter number, and other information on the screen. Subtitles If a disc provides subtitles, you can choose to hide or display them. This operation works only with discs that provide subtitles. Stop Displaying Scene Information · 1 Press SUBTITLE Press INFO. repeatedly until the scene information disappears. Audio You can change the audio sound track to any available language on the disc. 1 Press AUDIO 2 Press AUDIO during playback. repeatedly until the preferred language is selected. For your reference: · · If the preferred language is not shown as an option even after pressing the button several times, it may indicate that language is not available on the disc. When you load or remove the disc, the portable DVD player will search for the Audio language selected in the Setup Menu. If your preferred language is not available on the disc, the portable DVD player will playback the disc's default language. during playback. once, the first · When you press SUBTITLE subtitle language recorded on the disc will be displayed. The rest of the subtitles recorded will display in sequence as you press the button. " will display · If no subtitles are recorded " instead of the language number. 2 Press SUBTITLE repeatedly until the preferred language is selected. · You can change to another language with this function, or you can clear the subtitles by pressing this button repeatedly until "SUBTITLE OFF" appears on the screen. · In some cases, the subtitle language may not change immediately to the selected one. For your reference: · · If the preferred subtitle language is not displayed as an option even after pressing the button several times, it may indicate that the language is not available on the disc. When you load or remove the disc, the portable DVD player will search for the Subtitle language selected in the Setup Menu. If your preferred language is not available on the disc, the portable DVD player will playback the disc's default language. 14 Special DVD Features Angle Some DVD discs contain scenes which have been shot simultaneously from a number of different angles. Use the ANGLE button to view these alternative scenes. Title Some DVDs have Title menus, which allow you to choose among multiple titles (usually movies). 1 Press TITLE in stop mode · The Title menu appears, if available. 1 Press ANGLE 2 Press ANGLE during playback. repeatedly until the preferred viewing angle is selected. · ANGLE will only function on discs where different angles have been recorded. 2 Press /// to select the preferred item. 3 Press PLAY/ SELECT. Disc Menu Most DVDs have disc menus, which include special disc features, including audio languages, subtitle languages and more. Mute To mute the volume on the portable DVD player. 1 Press MUTE during playback. · To resume normal sound, press MUTE repeatedly until "MUTE OFF" appears on the screen. 1 Press PLAY/ SELECT. 2 Press DISC MENU. · The Disc menu appears, if available. 3 Press /// or use the number button(s) to select the preferred item. · Menu details vary by disc. 15 Other Disc Playback Playing Audio CDs Before You Begin... Connect the portable DVD player to a power outlet and plug in headphones or listen to the built-in speakers. You can also connect the player to external equipment, such as a TV and/or audio system. If you do this, remember to: · Turn on your TV and select the appropriate video input. · Turn on your stereo or audio system and select the appropriate audio input. · Slide the AV Out/AV In switch to the AV Out position. Press REV or FF during playback. · Normal playback is resumed when you press PLAY/ SELECT. · The Forward Scan ( x2, x4, etc.) and Reverse Scan ( x2, x4, etc.) speed changes each time you press the REV/FF buttons. Forward/Reverse Scan Skipping Ahead Press NEXT during playback. · Skips a track each time you press the NEXT button. · · Skipping Back Basic Audio CD Playback 1 Press POWER on. 2 Press OPEN to open the disc cover. 3 Hold the edge of the disc and place it in the tray Press PREV during playback. When you press the PREV button midway through a track, the portable DVD player returns to the beginning of the track. The player then skips a track each time you press the PREV button. with the label side up. · Press the disk onto the spindle in the center of the tray. 4 Close the disc cover. · Standard CDs start playing automatically. · If the CD has playback control, the CD disc menu will appear. Pause Press PAUSE once during playback. · Playback is paused. To return to normal playback Press PLAY/ SELECT. Press INFO. during playback. · Press INFO. repeatedly to display the elapsed time, track number, and other information on the screen. Displaying Track Information Stopping Playback · · Press STOP once to stop and hold playback at the current position. Press STOP twice to stop and reset the disc to the beginning. Stop Displaying Track Information · Press INFO. repeatedly until the track information disappears. 16 Other Disc Playback Playing Kodak Picture CDs You can play Kodak Picture CDs in your portable DVD player. Play Mode Basic Playback 1 Load a Kodak Picture CD. · After a few seconds, the portable DVD player starts a slide show of available images. 2 Press INFO. to view the current image number and total number of images. 3 Use the number keys to jump to a specific image. · The portable DVD player will begin the slide show from the selected image. · Press PAUSE to pause the slide show. · Press STOP to stop the slide show and enter Thumbnail mode. Play mode allows you to view your images in a slide show. 1 Press / to select the Play icon ( ), then press PLAY/ SELECT. 2 The slide show starts playing from the current image. · Press PREV and NEXT to view the previous or next image. · Press / to rotate the current image in 90 degree increments. · Press PAUSE to pause the slide show. · Press PLAY/ SELECT to resume the slide show. · Press STOP to return to Thumbnail mode. Program Mode Playback Modes There are four modes while playing a Kodak Picture CD: · Thumbnail Mode · Rotate Mode · Play Mode · Program Mode Thumbnail Mode Thumbnail mode allows you to view thumbnails of up to 15 images at a time. 1 Press STOP to stop the slide show. 2 Press /// to select "Return" then press PLAY/ SELECT. 3 Press PREV and NEXT to view the previous or next page of thumbnail images. 4 Press /// to choose the desired image. 5 Press PLAY/ SELECT to see the full size image and start the slide show. Program mode allows you to create a custom slide show. 1 Press STOP to stop the slide show. 2 Press /// to select "Program" then press PLAY/ SELECT. 3 Press /// to highlight the desired images, then press PLAY/ SELECT to mark them with a yellow box and add them to your Program List. 4 Press /// to choose "Program List", then press PLAY/ SELECT. · The Program List menu appears with thumbnails of all your marked images. 5 Press /// to choose the Play icon ( ), then press PLAY/ SELECT to play the programmed images. To delete an image from the programmed list · Press /// to choose the image, then press PLAY/ SELECT. To delete all images from the programmed list · Select "Clear all" and press PLAY/ SELECT. To exit the programmed list · Press / to choose "Return", then press PLAY/ SELECT. To exit program mode. · Press / to choose "Return" again, then press PLAY/ SELECT. Rotate Mode You can rotate your images clockwise in 90 degree increments. 1 Press STOP to stop the slide show. 2 Press /// to select "Rotate" then press PLAY/ SELECT. 3 Press PREV and NEXT to view the desired page of thumbnail images. 4 Press /// to choose the desired image. 5 Press PLAY/ SELECT repeatedly to rotate the image clockwise in 90 degree increments. · To restore all rotated images to their original state, choose "Reset" and press PLAY/ SELECT 17 Other Disc Playback Playing JPEG Picture CDs You can play JPEG picture CDs in your portable DVD player. Program Mode Basic Playback 1 Load a JPEG Picture CD. · After a few seconds, the portable DVD player starts a slide show of available images. 2 Press INFO. to view the current image number and total number of images. 3 Use the number keys to jump to a specific image. · The portable DVD player will begin the slide show from the selected image. · Press PAUSE to pause the slide show. · Press STOP to stop the slide show and enter File Manager mode. Program mode allows you to create a custom slide show. 1 Press /// to highlight the desired images, then press PLAY/ SELECT to mark them with a yellow box and add them to your Program List. 2 Press / to choose "Program List", then press PLAY/ SELECT. · The Program List menu appears with a list of all of your marked images. 3 Press / to choose the Play icon ( ), then press PLAY/ SELECT to play the programmed files. To delete a file from the programmed list · Press / to choose the file, then press PLAY/ SELECT. To delete all files from the programmed list · Select "Clear all" and press PLAY/ SELECT. To exit the programmed list · Press / to choose "Return", then press PLAY/ SELECT. To exit program mode. · Press / to choose "Return" again, then press PLAY/ SELECT. Playback Modes There are four modes while playing a JPEG Picture CD: · File Manager Mode · Play Mode · Program Mode · Thumbnail Mode To enter these modes: 1 Press STOP. 2 Press / to select the desired mode. 3 Press PLAY/ SELECT to enter the selected mode. File Manager Mode File Manager mode allows you to view your images in a directory format. · Press /// to choose the desired image, then press PLAY/ SELECT to display the image. · Press PREV and NEXT to view the previous or next 6 images in the list. Play mode allows you to view your images in a slide show. · Press PREV and NEXT to view the previous or next image. · Press / to rotate the image in 90 degree increments. · Press PAUSE to pause the slide show. · Press PLAY/ SELECT to resume the slide show. · Press STOP to return to File Manager mode. Thumbnail mode allows you to view thumbnails of up to 15 images at a time. · Press /// to choose the desired image, then press PLAY/ SELECT to see the full size image and start the slide show. · Press PREV and NEXT to view the previous or next page of thumbnail images. · To rotate an image, first select it, then choose "Rotate" and press PLAY/ SELECT. To restore all rotated images to their original state, choose "Reset" and press PLAY/ SELECT. Thumbnail Mode Play Mode 18 Other Disc Playback Playing MP3 CDs 1 Press POWER on. 2 Press OPEN to open the disc cover. 3 Hold the edge of the MP3 disc and place it in the Programming MP3 CDs Program mode allows you to create a custom play list. tray with the label side up. · Press the disk onto the spindle in the center of the tray. 4 Close the disc cover. · After a few moments, the first MP3 file in the disc's root directory will start playing automatically. 1 Press STOP to stop playback. 2 Press / to select "Program", then press 3 Press /// to highlight the desired PLAY/ SELECT. tracks, then press PLAY/ SELECT to mark them with a yellow box and add them to your Program List. 4 Press / to choose "Program List", then press PLAY/ SELECT. · The Program List menu appears with a list of all of your marked tracks. 5 Press / to choose the Play icon ( ), then press PLAY/ SELECT to play the programmed files. To delete a track from the programmed list · Press / to choose the track, then press PLAY/ SELECT. To delete all tracks from the programmed list · Select "Clear all" and press PLAY/ SELECT. To exit the programmed list · Press / to choose "Return", then press PLAY/ SELECT. To exit program mode. · Press / to choose "Return" again, then press PLAY/ SELECT. Browsing Directories MP3 discs are often divided into directories (i.e., folders) which are subdivided into MP3 tracks. If your disc contains directories: 1 Press STOP to stop playback. 2 Press /// to choose the desired 3 Press /// to choose the desired track, then press PLAY/ SELECT to start playback. · You can also enter a track number directly with the number buttons, then press PLAY/ SELECT to start playback. To stop playback · Press STOP. To skip to the previous/next track. · Press PREV / NEXT during playback. To pause playback · Press PAUSE. To resume playback · Press PLAY/ SELECT. directory, then press PLAY/ SELECT to open it. Playing CDs with MP3 and JPEG files The portable DVD player will play CDs with MP3 and JPEG files. The operations are the same as with standard MP3 and JPEG discs. 19 Language Setup On Screen Display (OSD) Language You can select among various languages for the player's on-screen display (OSD). Disc Menu Language You can select your preferred language for DVD disc menus. 1 Press SETUP in Stop mode. 2 Press / to select "Language Setup", then 3 Press / to select "OSD", then press PLAY/ SELECT. Language Setup OSD Menu Audio Subtitle English French German Italian Spanish press PLAY/ SELECT. 1 Press SETUP in Stop mode. 2 Press / to select "Language Setup", then 3 Press / to select "Menu", then press PLAY/ SELECT. Language Setup OSD Menu Audio Subtitle English Chinese Japanese French German press PLAY/ SELECT. : Move : Select SETUP: Quit : Move : Select SETUP: Quit 4 Press / to select your preferred language. 5 Press PLAY/ SELECT. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 4 Press / to select your preferred language. 5 Press PLAY/ SELECT. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 20 Language Setup Audio Language [DVD] You can select your preferred language for DVD audio sound tracks. Subtitle Language [DVD] You can select your preferred language for DVD subtitles. 1 Press SETUP in Stop mode. 2 Press / to select "Language Setup", then press PLAY/ SELECT. 3 Press / to select "Audio", then press PLAY/ SELECT. Language Setup OSD Menu Audio Subtitle English Chinese Japanese French German 1 Press SETUP in Stop mode. 2 Press / to select "Language Setup", then 3 Press / to select "Subtitle", then press PLAY/ SELECT. press PLAY/ SELECT. : Move : Select SETUP: Quit 4 Press / to select your preferred language. · Select "Original" if you want the default language to always be played first. 5 Press PLAY/ SELECT. · If the language selected is not recorded on the disc, the DVD player will playback the disc's default language. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 4 Press / to select your preferred language. 5 Press PLAY/ SELECT. · If the selected language is not available on the disc, the player will select the disc's default language. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 21 Screen Setup TV Type The TV Type feature allows you to set your preferred aspect ratio for DVD movies. Choose from the following: · 4:3 PS (Pan & Scan) - Crops widescreen movies to fit a standard television. · 4:3 LB (Letterbox) - Shows the full width of widescreen movies on a standard television with black bars above and below the picture. · 16:9 - Select if you have a widescreen television. Screen Saver The Screen Saver comes on automatically to protect the LCD screen if the player is left in Stop mode for 10 or more minutes. 1 Press SETUP. 2 Press / to select "Screen Setup", then press 3 Press / to select "Screen Saver", then press PLAY/ SELECT. Screen Setup TV Type Screen Saver TV System Video Output On Off PLAY/ SELECT. 1 Press SETUP. 2 Press / to select "Screen Setup", then press PLAY/ SELECT. 3 Press /to select "TV Type", then press PLAY/ SELECT. Screen Setup TV Type Screen Saver TV System Video Output 4:3 PS 4:3 LB 16:9 : Move : Select SETUP: Quit 4 Press / to select "On" or "Off". 5 Press PLAY/ SELECT. : Move : Select SETUP: Quit To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 4 Press / to select your preferred TV Type setting. 5 Press PLAY/ SELECT. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 22 Screen Setup TV System When connecting the portable DVD player to a TV, you must specify the broadcast system of your television. Choose from the following: · NTSC - The color TV broadcast standard for the USA, Canada, Latin America and Taiwan. · PAL - The color television broadcast standard for Western Europe (except France, where SECAM is the standard), Australia, China, Singapore and Malaysia. · AUTO - Select if you have a multi-system TV that supports both NTSC and PAL. Video Output If you are using the S-Video/Progressive Scan video output to connect the portable DVD player to your TV, you must specify which connection you are using (SVideo or P-SCAN). · Before you select P-SCAN, make sure your TV supports Progressive Scan and that the Y, Pb, and Pr cables are properly connected. · If your screen turns black after adjusting this setting, press the MODE button to switch back to S-Video mode. 1 Press SETUP. 2 Press / to select "Screen Setup", then 1 Press SETUP. 2 Press / to select "Screen Setup", then press 3 Press / to select "Video Output", then press PLAY/ SELECT. Screen Setup press PLAY/ SELECT. 3 Press /to select "TV System", then press PLAY/ SELECT. Screen Setup TV Type Screen Saver TV System Video Output NTSC PAL AUTO PLAY/ SELECT. TV Type Screen Saver TV System Video Output S-Video P-SCAN : Move : Move : Select SETUP: Quit : Select SETUP: Quit 4 Press / to select the appropriate TV System setting for your television. 5 Press PLAY/ SELECT. 4 Press / to select the appropriate Video Output setting for your television. 5 Press PLAY/ SELECT. · If you selected P-SCAN, you will be prompted to confirm that your TV supports Progressive Scan. Press PLAY/ SELECT to continue, or STOP to cancel. Screen Setup TV Type Screen Saver TV System S-Video P-SCAN To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. Your Output Video TV Supports P-Scan NO Press Stop 4 : Move : Select SETUP: Quit To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 23 Audio Setup Digital Audio Output [DVD] The digital audio output jack (labeled "Coaxial") is used to output the audio signal recorded on DVD discs to an external amplifier/receiver. The player provides three options for this audio signal: · SPDIF/PCM - Select if you are using a 2-channel digital amplifier. · SPDIF/RAW - Select if you are using a Dolby Digital 5.1 or DTS capable amplifier. · Off - Select if you are not using the Coaxial audio output. WARNING: · Do not set "Digital Out" to "SPDIF/RAW" unless you are connecting the player to an A/V amplifier/receiver with Dolby Digital (AC-3) decoding capability. · High volume sound may damage your hearing as well as the speakers. To return to the Setup menu Press . To exit the Setup menu Press SETUP or select "Exit Setup" on the Setup Menu screen. 1 Press SETUP in Stop mode. 2 Press / to select "Audio Setup", then press 3 Press / to select "Digital Out", then press