User manual H&B AV-612LCD

MOBILE MULTIMEDIA PLAYER AV-612LCD BEFORE OPERATING THE UNIT, PLEASE READ THIS MANUAL THOROUGHGLY AND RETAIN IT FOR FUTURE REFERENCE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Read instructions" All the safety and operating instructions should be read before the product is operated. Retain instructions. The safety and operating instructions should be retained for future reference. Heed warning - All warnings on the product and in the operating instructions should be adhered to. Follow instructions. All operating and use instructions should be followed. Water and moisture - The appliance should not be used near water; for example, near a bathtub, Washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like Carts and stands the appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in o built-in installation, such as o bookcase or cabinet that may impede the flow of air through the ventilation openings Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Power sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Ground or polarization. Precautions should be taken so that the grounding or polarization means of on appliance is not defected. Power-cord protections - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance. Protective attachment plug - The appliance is equipped with an attachment plug having overload protection. This is a safety feature. See instruction manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. Power lines - An outdoor antenna should be located away from power lines. Non-use periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. Object and liquid entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. Damage requiring service- The appliance should be serviced by qualified service personnel when; The power supply cord or the plug has been damaged; or Objects have fallen, or liquid has been spilled into the appliance; or The appliance has been exposed to rain; or The appliance does not appear to operate normally or exhibits a marked change in performance; or The appliance has been dropped, or the enclosure damaged. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel, servicing. The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. Page 2 / 20 Congratulations! You are now the proud owner of one of the most sophisticated technology in consumer electronics. The AV-612LCD is a HDD-based portable audio-video devise that allows you to watch, listen and view digital media content of movie, music and photo anytime, anywhere. With 3.5 hours of battery life on movie playback you can either enjoy the content you already stored in the AV612LCD's enormous hard disk drive on its 3.5 inch TFT-LCD screen or on your home entertainment big screen TV or even on projector. You have made the right choice when you decide on the AV-612LCD. Read this User Manual carefully and enjoy yourself with your new found companion, the AV-612LCD. Getting to know your AV-612LCD TFT-LCD Display Infrared Speaker Power On/Off LED indicator Connector sliding cover Headset port Volume Dial Connector USB Port 4-Ways Rocker Switch Function Key Page 3 / 20 Charging Your AV-612LCD for The first time Place your AV-612LCD onto the cradle/docking base and plug in the AC/DC adaptor provided. Initial charging to full capacity will take about 8 hours and subsequent charging will be approximately 5 hours. Upon full charge, the charging indicator will turn off automatically. Charging with the cradle To charge directly on the unit, just plug in the AC/DC adaptor directly onto the DC port located on the side of the AV-612LCD. Charging directly on the AV-612LCD Quick Guide To Function Keys & 4-Way Rocker Switch 1.Right Function Key Select A one-touch function key for all command executions. Pause/Resume During movie and music playback. Zoom One-push command and followed by left/right push of the 4-way rocker switch for scaleup and scale-down. Move/Pen One-push command and followed by the left/right and up/down push of the 4-way rocker switch to move picture. Rotate One-push command and followed by left/right push of the 4-way rocker switch for clockwise and anti clock-wise rotation. Save for pre-set and soft keyboard functions execution Enter for soft keyboard functions execution. 2. Left Function Key Back to previous page Stop/Return to Previous Page 3. Four-Way Rocker Switch Up push Scroll up Scale up screen during movie playback Back to previous page during photo viewing Move/Pan picture up during photo viewing Previous track: goes back to the previous music file in the list order 4. Down push Scroll down Scale down screen during movie playback Next photo during photo viewing Move picture down during photo viewing Next track: goes to the next file in the list order Page 4 / 20 Quick Guide To Function Keys & 4-Way Rocker Switch 5. Right push Edit function menu pop up (Rename, Delete, Move, Copy, NewFolder) Fast Forward (2X, 4X and 8X) during movie and music playback Rotate picture clock-wise during photo viewing Zoom/Enlarge photo after pressing the right function Select key. Move/Pan photo after pressing the right function Select key. Setting Selection during pre-set adjustment (Power, Play Mode,Display, etc) 6. Left push Edit function menu pop-up (Rename, Delete, Move, Copy, New Folder) Reverse command during movie and music playback. Rotate picture anti clock-wise during photo playback. Zoom/Enlarge photo after pressing the right function Select key . Move/Pan photo after pressing the right function Select key. Setting Selection during pre-set adjustment (Power, Play Mode,Display, etc.) 7. Volume Dial Doubled As Pre-Set Key During Playback 1. During playback of movie, music or photo, one push on the volume dial allows you to access the quick pre-set function such as: LCD Brightness, Contrast, Balance, Bass, Treble, etc) 2. After selecting a pre-set function, just toggle the volume dial up or down for your preference. 3. exit the pre-set menu after selection of the saturation option. 8. Volume Dial Functions during Photo Viewing 1. Toggle down wards the volume dial to view 4 slides at one time. 2. To view full screen size of any one picture, you can either toggle down wards again the volume dial or by pressing on the Select key when you land on the picture of your choice. 3. To go back to one-picture viewing just toggle downwards. Page 5 / 20 Starting To Use Your AV-612LCD Turn on your AV-612LCD and this main program frame will appear on the screen. There are altogether 6 programs represented by 6 friendly icons. Movie Music Photo HDD Movies short cut. Sound tracks short cut. JPEG photos short cut. AV-612LCD's residence hard disk drive. (explore all media files on HDD) Set-up MOD 7 pre-set functions namely Sound, Clock, Power, Play Mode, Display, System and Network. (Set-up will be described separately under Operating Setup Functions) Media content streaming functionality allowing you to stream digital media content from your PC to your home TV or projector for large screen viewing through the AV-612LCD. Page 6 / 20 Getting to know the symbols Folders ­ Folders contain all the individual Files that you have saved under the Folder that you created. Parent Folder ­ From Parent Folder you will access the root of your resident hard disk drive where all your files are stored. "File List" ­ From the Folder List press the right function Select key to access your File. Once in the File list, press again the right function - Select key to play back the file. File list icon for Movie File list icon for Music File list icon for Photo Play List icon for Music Note: When you press the right side of the 4-way rocker switch you will view Detail of content or Edit content. Page 7 / 20 Movie Playback & Features Movie Playback 1. Select Movie on the program frame using the 4-way rocker switch. and Files . 2. Press the right function Select key to access the movie Folders From your Folders press again the right function Select key to access the individual Files. To playback simply press again the Select key. 3. You can choose whether to play back one single file or all files from your movie folder. Just push the right side of the 4-way switch to access this menu. To Edit Your Movie Content Press the right side of the 4-way Rockerswitch to access the edit menu frame Note: Edit will be described separately under Edit Function. Functions during Playback Fast Forward ­ press right side of the 4-way rocker switch for 2X, 4X or 8X fast forward. To resume play, press the right function Select key. Pause/Resume ­ press right function Select key to Pause or Resume Scale up/down ­ press the up or down side of the 4-way rocker switch to scale up picture frame or reduce Adjusting Audio & Video Quality ­ press the volume dial to turn on Subtitle and adjust Balance, Bass, Treble, LCD Brightness, Picture Brightness, Contrast and Saturation. Just toggle the volume dial up or down for your choice. Page 8 / 20 Music Playback & Features (MP3 / WMA / OGG) 1. Select Music rocker switch. on the main program frame by using the 4-way list or 2. Press the right function Select key to access the Files Folder list. Select the sound track of your choice and press again the right function Select key to play back the sound track. 3. You can choose whether to play back one single file or all files from your music folder or play list. Just push the right side of the 4-way switch to access this menu. Functions During Playback Fast Forward ­ press the right side of the 4-way switch. (playback jumps forward 10sec) NEXT & PREVIOUS - During music playback, press the Up side of the 4-way button to go back to the Previous music title. Press the Down side of the 4-way button to go to the Next music title. Pause/Resume ­ press the right function Select key to Pause and Resume Adjusting Audio Quality ­ press the volume dial to select your pre-set function. Just toggle up or down the volume dial to adjust. To Edit Your Music Content Press the right side of the 4-way switch to access the edit menu frame. Note: Edit will be described separately under Edit Function. Page 9 / 20 Photo Viewer and Features Photo Short Cut Icon Photo File List Icon 1. Before starting to view your photo album, go to Setup function to pre-set your viewing preference under Play Mode. You can choose from Slide Show to view 1 photo or 4 photos at a time. 2. During slide show of 1 photo you can enlarge, shift and rotate the photo. To enlarge ­ press once the right function key and press the left/right side of the 4-way rocker switch to enlarge or reduce the photo. To rotate ­ press again the right function key to change the command and then press the left/right side of the 4way rocker switch to rotate the photo. To shift ­ press again the right function key to change the command and then followed by pressing the 4-way rocker switch to shift the photo. To adjust picture quality during photo viewing simply press the volume dial and toggle up or down for adjustment. Adjusting Picture Quality during Photo Viewing To view 4 pictures at one glance just toggle the volume dial downwards. Select the picture you want to view in full screen size and press the right function Select key. To return to 1-picture viewing just press again the same right function Select key. Multiple Picture Display Press the right side of the 4-way switch to access the EDIT menu. Edit Function Page 10 / 20 Setup Functions Sound ­ Navigate with the 4-way rocker switch to pre-set the Sound Quality of your preference and press Save when finished. Clock ­ Set the clock to your local standard by toggling with the volume dial after selecting the details with the 4way rocker switch. Press Save when finished. Power ­ Save power while using the AV-612LCD. You can pre-set auto Shutdown and Dim the LCD back light when there is an interval between operation. Play Mode ­ Pre-set your choice of viewing the photo album. You can select from Slideshow of 1 picture, 4 pictures or 9 pictures and time lapse for each preview. Display ­ Select your choice of video output on the 3.5 inch display screen or through your TV, adjust your LCD Brightness, Contrast and Saturation. System ­ This pre-set function allows you to decide whether you wish to utilize the remote control function. It also shows you the current status of your firmware version and hard disk. Network ­ This allows you to set-up your MOD's IP which supports DHCP and Static IP. Under Network you can also view your AV-612LCD's MAC Address. See MOD for more details. Page 11 / 20 Edit Functions Description Rename ­ You can rename files or folders stored in the AV-612LCD. As you select this function, a soft keyboard will appear on the screen. Type in the file name by means of the 4-way rocker switch and enter Save when you have finished. Delete ­ Go to the file that you wish to delete and carry out this command. Move and Copy ­ You can move or copy content stored in your AV-612LCD from one location to another within the AV-612LCD. This can be any of the folders that you have created. Firstly, go to the content that you wish to move or copy Next, press the right side of the 4-way switch to access edit menu and select. Your screen will be split into two columns. The one on the right is the location where you want to migrate your content and the one on the left shows source of your content. Access the location where you want the content migrated and press Select to execute either move or copy command. Note: To move scroll bar from left to right column or vice versa simply press the volume dial. You can view the content that you have just moved or copied by accessing the Edit menu. New Folders ­ New folders can be created for the purpose of organizing your files. Again, go to Edit menu to execute this command. Play List ­ This function applies only to Music program. Play list allows you to list and group your favorite sound tracks under your own list name. Page 12 / 20 Playing Content on Big Screen (TV or Projector) 1. Place your AV-612LCD onto the cradle/docking base. 2. Plug in the Audio/Video cable provided and go to Setup function and select Display. 3. Under Display select Video Output and press the right side of the 4-way rocker switch to select TV output. Note: Your AV-612LCD's screen will be turned off as you switch to TV output now that screen display is already switch over to TV screen. 4. With the remote control you can now operate from a distance. 5. You can also playback sound tracks on your stereo system. Note: You can choose to output your video via S-Video or Component Video connection. Transferring Content into the AV-612LCD from PC 1. Transfer of files from PC or any other source into the AV612LCD's hard disk drive is easily done via USB 2.0 cable provided. 2. When connected, your PC will recognize the AV-612LCD as an external storage device. 3. Carry out the file transfer the same way as you would transfer files between USB hard disk and your PC's resident hard disk drive. Page 13 / 20 AV-612LCD PC Management Program Before you begin, check to make sure that the USB cable is connected. 1. The AV-612LCD's PC Management Program serves two major functions: a. Managing AV-612LCD's content via your computer. Here you can copy content from your computer into your AV-612LCD and vice versa. You can also edit the content stored in your AV-612LCD via your computer. b. Stream digital media content from your computer to your TV via the AV-612LCD as a bridge or digital media adaptor. 2. A CD ROM containing this program is included in your AV-612LCD package. Install this program into your PC and access this program via your Programs grouping. 3. Connect your AV-612LCD to your PC via USB cable. Click on the program and you are in. Your PC screen will show two sections; the one on the left is content of your AV-612LCD and the one on the right is content of your PC. Click on the program icons of MOVIE, MUSIC, PHOTO to access them and manage these content. You can copy from AV-612LCD to your PC or vice versa with the drag and-drop action. You can also delete content on both sides. In the music segment you can create new play list and edit existing playlist. To add content to your new play list, click on Edit Play List. Now the section on the right will display content in your computer and the left displays content in your AV-612LCD. Simply drag-and-drop your selections and click OK when you are done. Note: When you have finish with this PC Management Program, DO NOT DISCONNECT the USB cable without first consulting your toolbar for "Safely Remove USB Mass Storage Device". Default Do not change this unless there is conflict with other computer service. If a conflict happens you can modify the Port number from 1023 to 65535. 4. 5. 6. Content stored in your AV-612LCD Content stored in your PC Page 14 / 20 MOD / Media Content Streaming Before you begin, check to make sure that the Fast Ethernet cable is connected. 1. Go to your computer and click on Program to search for AV-612LCD PC Manager. Click open and you are now in your Management Program. 2. If AV-612LCD is not found it will enter into MOD mode. The reason is that the USB cable is not connected. However, you can run the MOD program. 3. From your computer click on Browse to pick out what you want to stream via the AV-612LCD. Click open the content you have selected and click Apply. The content will be shared to the AV-612LCD and ready for streaming. 4. Go to your AV-612LCD and under MOD you will find that the same content will be displayed on your AV612LCD screen. Simply click on the files and select Play to playback these content that you have just picked to stream to your TV or even hifi system for music. 5. On your AV-612LCD click on the MOD icon and select Connect. 6. On the AV-612LCD the Parent Folder now shows that your AV-612LCD is connected to the computer that is currently running the AV-612LCD's PC Management Program. Content folder that you have picked to share for streaming. Default Do not change this unless there is conflict with other computer service. Note :When this happens you can change Port number from 1023 to 65535. AV612LCD connexion mode, ensure to use a crossed RJ45 Cable. Note: In Fast Ethernet PC Within a HUB or SWITCH ethernet connexion, ensure to use stright RJ45 cables. Page 15 / 20 Upgrading Your Firmware Your AV-612LCD's firmware can be upgraded whenever as and when a new version is released. Please follow the following steps to upgrade: 1. Make sure that battery capacity on your AV-612LCD is 10% and above. 2. Plug in the charging adaptor and turn on your AV-612LCD. 3. When main menu frame comes on the screen, connect the USB cable with the other end going to your PC. 4. Over your Windows File Explorer look for the location of your AV-612LCD "Hard Drive Folder" 5. Unzip the firmware file onto the AV-612LCD's drive root directory. 6. Once transfer accomplished, disconnect the USB cable and go to Setup on the main menu. Note: Before disconnecting the USB cable, consult your tool bar at the bottom of your monitor screen for "Safely Remove USB Mass Storage Device." 7. Power on your AV-612LCD and access System on the menu and scroll to Update Firmware and press Save. 8. Upgrade process is in progress and after 1min your AV-612LCD will be shutdown automatically. 9. Unplug the DC adaptor and the blue light by the side of the unit will come on. Plug in again the DC adaptor. 10. When main menu frame come back on it means that the upgrading is complete. Note: If system does not turn on automatically, remove battery pack and DC adaptor. Attached batteriy pack again and turn on again the unit. Note : For updates and supplementary information, please refer to the Support page of our Website : www.hb-direct.com Page 16 / 20 Specifications Product ID Standard Memory Memory Types Interface Audio Format Video Format Photo Format Video Out Format Audio Out A/V Connections Media Streaming Remote Control Display Battery Type Battery Life Other Power Source Scalability System Requirements Dimensions Weight AV-612LCD HDD-based Portable Multimedia Player with 3.5inch TFTLCD display screen. 20GB Hard-disk drive 2.5" inch Hard Disk Drive USB 2.0 interface MP3, WMA, OGG sound tracks; MPEG 4 with MP3 and AC3 audio layer MPEG1, 2 & 4, MPEG-4 3.11, 4.0 & 5.0 and higher, XviD, BivX direct playback, Supports Full D1 (NTSC & PAL) resolution JPEG of any size Component, S-Video and A/V, NTSC-M, NTSC-J, PAL-B/D/G/H/I, PAL-60, PAL-M Base Band Std, 16:9 & 4:3 playback, 3:2 Pull Down Built-in Speaker, stereo headset or home theatre / hi-fi system (analog) On Cradle: Component Video, S-Video and A/V ports enable connection to TV or projector On Device: Stereo Port for headset On Cradle: Fast Ethernet for digital media content streaming from PC to TV and USB2.0 port IR Remote Control capability. Remote control device included. Built-in 3.5 inch 320x240 TFT-LCD display screen and Full D1(720x480) resolution for big screen output 3400mAh rechargeable lithium ion 3.5hrs on video playback Via 5V AC/DC adaptor direct on device or via cradle Downloadable firmware updates from internet PC: P2 266Mhz, Windows 98SE, ME, 2000, XP, 64MB, MAC: 9x or X iMac, G3 or higher 142 x 120 x 30 mm 500gr with battery pack Page 17 / 20 Warranty and support Updates Please check out regularly our web site for further updates and assistance about this product: Important safety information Read these instructions carefully and pay attention to all warnings and guidelines. Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock. Never insert objects into the AV-612LCD player's cabinet door. They might come into contact with dangerous voltage points or short-circuit components, which can cause fire or electric shock. Do not spill liquids on the AV-612LCD player. If the AV-612LCD Player does not function normally, or if it emits unusual sounds or odours, pull out the plug immediately and contact an authorized technician. Do not attempt to service the AV-612LCD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other hazards. All maintenance must be carried out by qualified service technicians. Warranty certificate H&B provides a twelve (12) month warranty from the date of purchase against material and manufacturing defects. In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product. If any problems arise, information on our authorized service centres is available the dealer who sold the product. Terms of Warranty 1. The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the serial number on the product is fully legible. 2. The obligations of H&B are limited either to repair or replacement of defective components. The repair or replacement of defective components is based on an assessment by H&B. Exchange is only possible if the repair cannot be performed. 3. Warranty repairs must be performed by an authorized H&B dealer, or an authorized service centre. No remuneration is provided for repairs performed by unauthorized workshops. Any repairs or damage to the product caused by unauthorized intervention are not covered by this warranty. 4. This product will not be viewed as defective, either in materials or in manufacture, if adaptation to national, local, technical or safety-related requirements is required in countries other than the specific country for which the product was originally designed and manufactured. 5. This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any consequential damages. The warranty does not cover the following: a. Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear. b. Costs connected to transport, disassembly or installation of the product. c. Misuse, including use for other purposes than was intended or faulty installation. d. Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation or other causes beyond the control of H&B. 6. This warranty applies to every legal owner of the product during the warranty period. www.hb-direct.com Distributor H&B products are distributed by: JPF Entertainment 50, rue Ardoin Bat 566 93400 Saint Ouen FRANCE info@jpf-europe.com www.hb-direct.com Tel + 33 1 49 489 340 - Fax + 33 1 40 109 599 Page 18 / 20 Page 19 / 20 Page 20 / 20