LCD TV HL-3200V / HL-3700V HL-4000V / HL-4200V 1 OWNER'S MANUAL PAL Contents Foreword Caution Important Safety Instructions Precaution 3 4 5 Overviewing your the Monitor Viewing the Control Panel Viewing the Connecting Panel Viewing the Remote Control - Key Description - PIP(Picture In Picture) - Loading the Batteries 13 15 10 11 16 Installation Table Stand Installation Speaker Installation 17 18 Connection the Cable/Devices Connection the TV Cable Connection the VCR Connection the DVD Connection the Set Top Box Connection the PC (D-Sub & DVI) Displayable Monitor Specification 19 20 21 22 23 24 Setting the Channel Basic Operation OSD Menu Structure Storing Channels Automatically Storing Channels Manually Fine Tunning the Channel Reception Editing the Channels Digest Function Teletext 25 26 27 29 29 30 31 32 Setting the Picturel Changing the Picture Mode -Adjusting the User Mode Changing the Colour Temperature 33 33 35 2 OWNER'S MANUAL Contents Setting the Picture Color Enhancer Video NR(Noise Reduction) Changing the Screen Form Selecting the Black Enhancer Adjusting the PC Screen(Geometry) 36 37 38 35 36 Setting the Sound Adjusting the Sound Balance Changing the Sound Mode Adjusting User Sound Mode Spatial Effect AVC (Auto Volume Control) MTS (Multichannel Television Sound) 40 40 41 41 41 42 Setting the Others Aujusting the Transparency of the OSD Window PIP(Picture In Picture) - Changing the Size in PIP - Choosing the Source in PIP - Picture Swap in PIP - Changing the Position in PIP Other Advanced Function - Set ID in Advanced - Setting the Blue Screen Mode - Changing the OSD Language - Front Key Lock in Advance 46 46 47 47 43 43 44 44 45 46 Setting the Time Setting the Current Time Setting the On Time Setting the Off Time Setting the Sleep Timer 48 48 50 50 57 58 63 Troubleshooting Spec. Warranty Card 3 OWNER'S MANUAL Caution CAUTION - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. CAUTION The stand intended for use only with This TV. Use with other apparatus is capable of resulting in Instability causing possible injury . WARNING - Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. - This is Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. - To reduce the risk of fire and electric shock, do not expose this product to rain or moisture. FCC NOTICE This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in home environment as well as in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Read all safety and operating instructions before operating your Monitor. Keep the safety and operating instructions for future reference. 4 Heed all warnings on the Monitor and in the operating instructions. OWNER'S MANUAL Precaution Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use the attachments/accessories specified by the manufacturer. 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) When installing the LCD TV, do not block the appliance coupler with any structure. User can easily have access to the coupler to disconnect it from AC main power. 5 OWNER'S MANUAL Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. * When power supply code or plug is damaged * If liquid has been spilled on the unit or if alien objects have fallen into the unit. * If the monitor has been exposed to rain or water. * If the monitor does not operate normally by following the operating instructions. * If the monitor dropped or the cabinet has been damaged * When the monitor exhibits a distinct change in performance. Setting CAUTION Follow all operating and use instructions. Do not use the Monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal. Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Bend antenna cable between inside and outside building to prevent rain from flowing in. -This may cause water damaged inside the Monitor and could give an electric shock. Do not place an outside antenna in the vicinity of overhead power lines, other electric light or power circuits. - This may cause an electric shock. There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. - This may cause an electric shock. 6 OWNER'S MANUAL Precaution Setting WARNING When installing the Monitor on a table, be careful not to place the edge of its stand. - This may cause the Monitor to fall, causing serious injury to a child or adult, and serious damage to the Monitor. Provide ventilation for the Monitor. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the Monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting. This plasma display is designed to be mounted horizontally (wide viewing). Any inquiry regarding its vertical position should be forwarded to the manufacture directly 7 OWNER'S MANUAL Precaution POWER CAUTION Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer. Unplug the Monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges. Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Do not touch the plug with wet hand. - It can make an electric shock. Use only a grounded or polarized outlet. For your safety, this Monitor is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet. Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 8 OWNER'S MANUAL Precaution Operation CAUTION Upon completion of any service or repairs to this Monitor, ask the service technician to perform safety checks to determine that the Monitor is in a safe operating condition. Do not place anything containing liquid on top of the Monitor. -This may cause a fire or could give an electric shock. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury. In case of smoke or strange smell from the Monitor, switch it off, unplug it from the wall outlet and contact your dealer or service center. - This may cause a fire or could give an electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Monitor. Operation WARNING When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the Monitor to normal. Do not ...