Bluetooth Box for GPS Receiver HI-403 HI-403 BT Cube is a small box contains Class 2 Bluetooth module. One end of the cube is a 6 pin Mini-DIN PS/II female connector for connecting to the power source DC 12V car charger while the other end is a 6 pin Mini-DIN PS/II male connector for connecting to the PS/II GPS receiver. Please consult the enclosed step by step Bluetooth connection set up procedure guides. Specifications: HI-403 Bluetooth V1.1 Compliances Frequency Range : 2.4 ~ 2.4835 GHz unlicensed ISM band Interface : USB / UART / SPI Receiver Sensetivity : -80 dBm @ 0.1% BER Transmitting Power : Class 2 -6 dBm ~ +4 dBm RF Input Impedance : 50 ohms Frequency Hopping : 1600hops/sec. Baseband Crystal OSC : 16MHz Data Rate : Up to 723kb/s Operating Temperature : -30°C ~ +90°C Transmitting Range : 10 meters (Typical) Power Consumption : 45 mA (Typical) G P S Haicom GPS Receiver Handheld GPS Receiver 5 LED indicator: Pin Assignment: Blinking: Searching host device Stay On: Bluetooh connected Bluetooth Box for GPS Receiver HI-403 BT Cube 1 2 3 4 2 4 6 PDA Cable/Charger USB Cable DB9 Cable PS/II Charger 1 3 5 6 Pin PS/2 Female Color Function CN1 Green RX To BT (From GPS) 5 White TX To GPS (From BT) 4 Red VCC 2 Black GND 1 6 Pin PS/2 Male Color Function CN1 Green TX 5 White RX 4 Red VCC 2 Black GND 1 1 3 5 Optional Accessories: 1 PS/II to PDA cable Charger 2 PS/II to DB9 serial cable 3 PS/II to USB cable 4 PS/II to AC cigarret lighter 5 PS/II (Male) to handheld GPS cable Model# CHG-XXXX CAB-PS2 CAB-USB CHG-PS2 CAB-XXXX 2 4 6 User Manual · The specifications are subject to changed without notice · All the names and trademarks are belonging to their respective companies. Get Connected; Installation Guide 3 Double Click "SPP on HAICOM BT GPS" 1 Double Click the Bluetooth icon Notebook Installations PDA Installations 2 Double Click "HAICOM BT GPS" 3 Found the host device 4 For Connected with device 1 Run"My Bluetooth Places" and Double Click the "Find Bluetooth Devices" icon 4 Key in pin code: 0000 5 2 Double Click "HAICOM BT GPS" Select the correct com port 6 Start GPS, NMEA message inflow 7 More satellites info 5 Connected